HP CLJ CP2025 HP CLJ Pro 400 M451 Pick Roller Change

[@BusinessMan1619]

After 14 years of working only on Toshiba copiers I'm now working for a small company that does a little bit of everything but none of it particularly well. Especially technician training. Thank you for this video. It's made my life a little less stressful.

[@trsmithLIII]

Great video. This helped me to rescue a 12-year-old HP CP2025. Repair place said too old to fix and should be replaced - other than beginning to jam, it is still a reliable workhorse. Something I did miss though was I could not get to the pick roller on the screen unless I reinstalled the toners. I have another CP2025 with the same symptoms and will replace its rollers tomorrow. $40.00 gets me two laser printers back in action. Thanks for the video.

[@crowleydj]

After rotating the Pick Roller, Unplug machine and remove the pick roller first and then the separation roller. I find this method easier..

[@joseconchas868]

You should unplug the machine after rotating the roller, and move the pick up roller out of the way first to have easier access to the separation roller.

[@Ahmedhosnybarbary]

Instead of replacing the rubbers I add small amount of gasket restore (oil car) and clean it ...it make the rubber work again .. Thank you

[@joseconchas868]

I'm trying to replace the separation roller on a similar machine which is the m541dn but that one seems to have a spring attached to it :/

[@recitoners5540]

i have a continuos error on a lj m451.indicates jam tray 1, but there is no trace of paper. I changed the pick up and it's still the same Where is the sensor? any ideas

[@nizarkeethadath7513]

"remove all paper from bin out bin is full" what a problem..?

[@homayoonelyasi3620]

thanks

[@truebenjamin444]

Good

[@joseconchas868]

Never mind, no spring attached to it.

[@elrincondealbert5656]

No se ve nada en menú

[@nokoolaid]

For some reason the pickup roller doesn't rotate when I click OK. What would this be?

[@user-rb7kr8sw4e]

James Lagnese Switch off printer by cable (not power button)

[@nokoolaid]

ММ ПМ I was able to get it done, eventually. :)

[@advancedhealthclinicutah]

@@nokoolaid how? step by step please?

[@nokoolaid]

@@advancedhealthclinicutah It was 5 years ago. That's water under the bridge. Long under..

[@Ashroyer86]

I swear, people that unwrap stuff on KZbin just have to make as much noise with the plastic as they can.