How to Fix Paper Jam Problem in HP Color LaserJet CP2025

#HP
#ColorLaserjJetCP2025
Welcome To Smart Tech.
How to Fix Paper Jam Problem in HP Color LaserJet CP2025? Watch the video if you facing the paper jam error in your HP Color LaserJet CP2025.
In this video I explained in detail, how to rotate the pickup roller in HP Color LaserJet CP2025. How to replace the pickup roller in HP Color LaserJet CP2025.
How to clean the pickup roller in HP Color LaserJet CP2015.
Step by step guide
How to replace the pick roller on an HP Color LaserJet CP2025 printer and Fix paper jam error.
In case you require any further information, feel free to ask in comments.
Subscribe To My Channel www.youtube.co...
Thank You!
Bilal's Workshop - Technologist and Vlogger
@BilalKhalid
​bilalk.com/bilal/

[@davehindmarsh8325]

You are a star ! Thank you so much for this video worked a treat on my printer

[@garryjones1878]

I was going to buy a new printer. I thought it was broken beyond repair. I spent 3 hours to print 12 pages a few weeks ago. I googled today and found your video. I turned the rubber on the roller and cleaned it. Works as good as new. Thank You so much.

[@BilalKhalid]

Glad I could help

[@keithjohnson5398]

Bravo! Unable to get the roller out so I just cleaned it with rubbing alcohol on a rag and now the printer works. Now going back into use q-tips and a toothbrush.

[@peterschweitzer5075]

Thank you so much. It worked. I was afraid to turn it by hand. I did, cleaned with alcohol solution and BANG! Before I could only print ONE PAGE at a time! Its not the cost of the printer, its the cost of the toner!!! Mine is an HP 1215. I have only gone through about 3 cartridges in 10 years! APPRECIATED!

[@michaelharris657]

Thank you very much for the excellent idea of rotating the unused inner side of the pick-up roller rupper to the pick-up area. It worked very well on my HP CM 2320nf MFP as well. Seems to be the very same pick-up roller. Simple solution for a high tech piece of equipment. Very great contribution to the global community, keep up the good & creative work! Michael from Germany

[@BilalKhalid]

Glad to hear that, stay blessed.

[@egcruzer]

Thank you, this fixed my problem. The only step I did differently was to flip the band inside out instead of rotating the band. The opposite side looked new and had a nice tackiness to it. Works perfectly.

[@BilalKhalid]

Good idea

[@moniqueschmucker7712]

You are MAGNIFICENT!!! I followed your instructions and am simply amazed!! The paper went through perfectly!!! We bought this used printer for our business from someone who gave up on it 5 years ago because the paper kept getting jammed! You are a genius! Thank you! Now, we just need to figure out how to stop the red lines across the paper. 😊

[@BilalKhalid]

Red line across the paper due to poor magenta toner, replace the toner nd the issue will resolve

[@hardrocking91]

Thank you for sharing your knowledge. It fixed my CP2025 jam issue. I have not seen anyone re-using the inner side of the band. Everyone replaced the roller ... you are very creative!!! Thank you again.

[@BilalKhalid]

You are welcome sir

[@missydanica]

Thanks a lot! This worked and I just prolonged the life of my printer for a while!

[@BilalKhalid]

You're welcome

[@totaljunk7508]

Thanks!!! had paper jams after fixing stuck solenoid problem and this took care of it!

[@omairkhan279]

Awesome! Thanks a lot for the video. My printer was getting paper jam if I print more than one page. I cleaned using the same steps, the only difference was my rubber strip was half smooth and half rough so I had to reinstall twice to get the correct orientation and it started working fine

[@yusufsharif4198]

My printer is picking up the paper now! JazakAllah Khair for sharing

[@BilalKhalid]

My pleasure 😊

[@GtTrader67]

Thank you so much. The printer has been sitting for almost a year because I couldn't figure out the issue. Was about to give up and throw it in the dumpster and buy a new laser printer. You just saved me hundreds of dollars.

[@BilalKhalid]

Glad I Could help

[@midifun8423]

Thank you very much for this video! My printer works again! 👍

[@aimansaad3291]

thank you very much, you are amazing, excellent explanation, Good Job, Please Continue

[@Channel-jj9zw]

Reversing the roller strap is so smart rather than replacing it. Thank you!

[@millermatt76]

Thanks for this video.. Totally worked!!

[@hendyhuang2989]

Thanks, that help alot. I just fix my printer the way you did. thanks for helping. What is the part number of that roller?

[@rogershone5078]

Amazing - thanks. Saved the printer for another few years!

[@BilalKhalid]

Glad it helped!

[@dexter0707]

It is working!!! You are the boss :)

[@shawbros]

I used to wash picker roller tires (On many different brands/models of printers) in soapy water, and then rinse well and dry well, and then reassemble. Washing it would clean the paper dust and glazed surface of the rubber off enough to make the rubber grip the paper better.

[@Bluedabadee3]

Paper was not picking up, i could see the paper only lifting near the roller when i pulled out paper tray, and this worked perfectly. Thank you!

[@BilalKhalid]

Great job!

[@gnadzon]

It worked perfectly! Thanks for sharing !!!

[@futureplan8802]

You are star thank you so much

[@missfunkster]

Omg thank you for this video 🎉 you made my work printer function again ❤

[@BilalKhalid]

Glad I could help!

[@Lee-qx9rj]

thank you for teaching..

[@BilalKhalid]

You are welcome

[@PhilBMashups]

thank you. you have just saved me the price of a new printer :-)

[@BilalKhalid]

Glad I could help!

[@4nuts4449]

Great ! my printer is no longer jamming.I sprayed the pickup roller with V-Belt Spray SPR-BL-V-400MLV from wurth so it is grippy again.

[@0MrENigma0]

I do the same thing and was wondering how I was going to tell someone how to do it and hurrah you posted a video. Thanks.

[@BilalKhalid]

Glad I could help

[@martincosta2791]

This just worked for me, thank you so much!

[@BilalKhalid]

Glad it helped!

[@Samiullah-sd3wj]

Thank you so much

[@ericengelmann274]

I can't understand more than a word or two, here and there, of what he's saying, but the video is useful. Thanks!

[@BilalKhalid]

Glad , it helped

[@MuhammadAli-bo9bv]

ماشا اللہ

[@FranckCHASTANG]

Un super grand merci pour ce tuto !

[@BilalKhalid]

Toujours le bienvenu

[@andrewmiriam9784]

Thank you for this video, my issue has been fixed.

[@BilalKhalid]

Glad it helped

[@Diana.Molina]

and it's FIXED!!! Thank you!

[@BilalKhalid]

You're welcome!

[@Przemix88]

did that and bring old trash printer to life with zero cost! thanks!

[@BilalKhalid]

Glad it helped

[@michelle-stevecarter6258]

Thank you saved the day!

[@BilalKhalid]

Glad it helped!

[@quasarbolides4436]

Thank you, it worked !

[@BilalKhalid]

You're welcome!

[@jor3725]

Me pasa lo mismo, pero a diferencia tuya cambie tanto pickup como separation pad y me sigue pasando lo mismo... a que se debera?

[@BilalKhalid]

Habrá un problema en la propia unidad. Intente encontrar la unidad y cámbiela.

[@skeptic10]

How much force you need to use to get this thing off? I've bend the clips like for 1 cm from both sides and trying to get the thing out but it does not move at all.

[@skeptic10]

Not moving. I'm taking this piece of shit to the dump.

[@lucindacat]

Right?! I noticed I have two yellow spacers things attached to the wall, while he just has one on the right hand side.. but I was searching the comments for other people with are stuck..on getting the roller off.

[@lucindacat]

Update: I DID IT! I GOT THE ROLLER OFF! I used a pair of scissors for LEVERAGING! A tip of the scissor on each white clip - put tenson on the scissors - and pop! I got the roller out easily!

[@kazimierzhoyszewski6574]

Sadly "Press [OK] to rotate" doesn't work for me. No effect whatsoever - no lights flashing, no angry printer noises, and when I press [OK] the second time (after the first time that _should_ have rotated the roller but didn't) then I'm taken up one level in the menu (to where it says "Setup Menu / 2ndary Service")

[@kazimierzhoyszewski6574]

OK, I had toners removed. After reinstalling toners it worked.

[@ArthursHD]

I did the trick and now it doesn't jam after every page :) Ordered a new one cause it still jams some of the time.

[@BilalKhalid]

Great