HP Omen 30L Fan Upgrade + Benchmarks: Drop Temps By 6 Degress Just From FANS!

[@ethanboltz9530]

This was super helpful, thank you. The almost 90c temps was freaking me out, I’m definitely upgrading

[@JeffTheITGuy]

Definitely should and definitely should watch more vids. Like all of them. Forever :)

[@sleiao8632]

Also will you show how the fans look and run after you've installed

[@carlosespinal1434]

The best part he forgot

[@fpsFAMOUS]

HP Omen 30L with RTX 3080. Do i need to do the same thing? The GPU is overheating all of a sudden. Any help would be appreciated.

[@m0nch0x]

Hey Jeff.. Today I got the Noctua redux fan 120 and it's not compatible with OMEN 30L. the temperatures were over 100 after the upgrade. It's not accelerating as fast as the stock fan. After some research I found that the stock fan is 4200rpm. The Redux is only 1700rpm. I don't know about the corsair now since your recommendation of the Noctua Redux failed.

[@m0nch0x]

also the corsair AF120 is a 3 pin! not 4 like for the Omen

[@JeffTheITGuy]

@@m0nch0x I’m so sorry, I used the Noctua and it did just fine, same with the corsairs. Are you using the stock cooler or an upgraded AIO? In this video, I was using an AIO with upgraded fans as well.

[@m0nch0x]

@@JeffTheITGuy stock cooler. What I'm noticing is that the fan is not fast enough. There is any other set up besides just installing the fan? 4500rpm vs a 1700rpm is a big difference. I have an i9 10850k cpu.

[@JeffTheITGuy]

@@m0nch0x speed doesn’t mean more air. The 10850K is a super hot chip, it needs an aftermarket cooler.

[@perceptionislife]

playing borderlands on high gets my temps in the 80s on GPU AND CPU I just put an order in for the fans recommended. Its hard to belive that fans make the difference I hope everything works out because I don't want my GPU and CPU so high in temps. Really hope it works

[@JeffTheITGuy]

Should work quite well. The AIO CPU cooler lowers temps on the CPU by about 20c

[@perceptionislife]

@@JeffTheITGuy I also under clocked my CPU by 1.0v and lowered my core multiplier to 151x and saw incredible drop in temps and i can still play Halo Infinite on High with temps in the mid 70s

[@JeffTheITGuy]

@@perceptionislife nice!

[@pumkin54]

Cable extender link is missing, please.

[@watchinvideos22]

Hello Jeff, first off by no means am I an IT guy but I know how to research and follow instructions. Today I was at best buy and employee told me i could buy this 3 fan kit from corsair and replace the fan in the back, as easy as plug and play but for some reason I'm not buying it. He was trying to sell me the Corsair iCUE H150I elite cappelix cou cooler. Just replace the rear panel and plug it he says?? My son would like 3 rgb fans, could you please guide me in the correct direction to accomplish this? Thank you and have a great day

[@pk7gamerz667]

Jeff love the video, I have a question is it possible to leave the front fan and replace the others?

[@bwb2321]

got these for my hp omen with the 3080 and i9. really loud sounds like its about to take off when the gpu does any serious loading. hoping to install very soon thanks for the info.

[@jordancrane1906]

where was the part where you removed the top fan? cause mine doesnt have a top fan?

[@JeffTheITGuy]

It's in a video I did installing a water cooler. It's in the omen playlist

[@mattdm1981]

This is really helpful Jeff, can I ask, if I just replace the fans and not the AIO in itself will I still see a system performance improvement just by replacing the three fans?

[@cameronleventis7]

what about adding a extra fan to the bottom of the case?

[@JeffTheITGuy]

I don’t think that you can

[@unds85]

I added a 120mm to the bottom as intake and it just lays down nicely in front of my PSU.

[@ethandamen3077]

I have a HPOMEN 30L with a 3080 and 5800x so will these fans still be the same size specs you’ve listed?

[@ethandamen3077]

I can’t get hold of the sp120 you reccommended what other fan would you go for other than this?

[@DennyShaneTV]

where is 92 mm noctua ?

[@robgalas2635]

Love my 30L. Went to replace the front fan. Like yours mine only had 2 screws. Doesn't even have the 4 holes drilled which frustrates me. Guessing yours was the same as it looks like you only put 2 back in. Can you confirm?

[@JeffTheITGuy]

Yep mine was the same Indeed

[@robgalas2635]

@@JeffTheITGuy Thanks. Bummer my Noctua fan does not allow me to use the original screws, going to need to get creative

[@OfficialLFP]

I noticed hp bios in the 30ls don’t let you adjust the fancurve and speedfan doesn’t seem to recognize the stock fans. If I upgrade to aftermarket fans will the bios still block the devices from being recognized by speedfan or any other software and still not allow for adjustment of the curves because of their built in gaming hub settings

[@JeffTheITGuy]

It’s possible. With better fans like Corsair, Noctua, etc even if it’s on the same fan curve they will cool better and be quieter

[@unds85]

Does the stock fans from HP have less cfm of airflow and less RPM as opposed to the Corsair and Noctua fans? Is that why the cooling is better?

[@JeffTheITGuy]

Not all fans are created equal. Blade design, speed, etc play a part. The Corsair fans have more CFM and static pressure to push more air into the case compared to the HP fans

[@unds85]

@@JeffTheITGuy You are awesome! I love your vids! I am going to do what you did and replace the 120mm intake and 92mm exhaust =) However, on the intake fan should I buy the SP120 or the AF120? (Both Corsair). Cooler Master made both 120mm and 92mm fans for Omen30L but I can't find out if it was an "SP" or "AF"? Also I want to remove the top bracket and install a 120MM fan on top for an exhaust fan, now should it be a SP or AF? THANKS!

[@JeffTheITGuy]

@@unds85 I believe all Corsair sells now is the SP series and they will work really well due to the lack of ventilation and will push in more air

[@unds85]

@@JeffTheITGuy OK great I will install two 120mm fans, one for intake and one for top exhaust and also replace the 92mm rear exhaust with the Noctua fan you recommended. Any other recommendations? (I won't do water cooling as I am terrified of removing the motherboard).

[@JeffTheITGuy]

@@unds85 that’s about it. It should reduce your temps by about 6-10c

[@boomspoon4004]

my parents and the pc expert in m neighborhood all say there is nothing wrong with the cooling but all my friends tell me there is So can i ask IS THERE SOMETHING WRONG WITH THE COOLING OF THIS COMPUTER????

[@JeffTheITGuy]

Hahaha, depends on your definition of wrong. It does run hot, too hot for most folks to be comfortable with. That heat degrades performance and can shorten the lifespan of your PC. Now is your PC ok with the current Temps? Sure, but it can be better.

[@boomspoon4004]

@@JeffTheITGuy wel right now my cpu is at a stable 60/61 degrees so

[@artich9480]

bought some be quiet fans to replace omens fans looking forward to seeing the difference in temps

[@JeffTheITGuy]

I like the difference in noise myself

[@gxthblxde]

What mm were your fans

[@artich9480]

@@gxthblxde 120

[@JeffTheITGuy]

@@gxthblxde 120 on the cooler, 120 in the front and 92mm in the rear

[@uG0TRobbed]

Good info here Jeff - I might also recommend a 3-way split of the front intake fan and dropping a couple of 92mm's for intake on the bottom of the vented case. (I have mine off the desk sitting on a cheap open bottom PC cart/stand). That super simple/cheap mod made about 5c improvement on it's own. My question is this - I have a new 120mm Arctic P12 PST/PWM RGB that I could use as front intake, and a 120mmArctic Bionix P120 PST/PWM that I could use as the top radiator exhaust, however I wasn't sure if those would be an upgrade over the stock Coolermaster 120MM's (or in the case of the front intake, I'd be happy with equal performance). Curious to hear your thoughts.

[@JeffTheITGuy]

Meh they could be an upgrade for sure. I need to test artic fans I never have, some folks speak highly of them.

[@uG0TRobbed]

@@JeffTheITGuy They're rated well in some fan tests that I've seen and about half the price of Noctua, so I will give a try this coming weekend when I install a couple other upgrades that are on the way. Bought this Best Buy model lightly used and can't believe they don't use Wifi 6/BT5.0 as standard. Grrr

[@tyellis7410]

@@uG0TRobbed did you ever get this installed and get the rgb to work?

[@ELCapiTRAN]

How did you get to the rear screws of the AIO fan? Mine is blocked by some components of the MB in my 30L 3080 ti

[@JeffTheITGuy]

Mine didn’t have an AIO to begin with. The screws where just there abs ready for the taking. So I took the top bracket off, pushed the plates out, mounted the AIO, then installed it

[@austinp3822]

So top and front fans are 120mm and rear is 92mm?

[@JeffTheITGuy]

Correct!

[@L_Emir_de_Passy]

Hi .. i bought my omen 30l in January... No upgrades were made by the matucatets since you made that video? Do you still recommend the Corsair fans as an upgrade? Anything better even if pricier? Thanks

[@JeffTheITGuy]

The corsairs are my fav

[@mikediz2775]

Good afternoon I purchased rgb fans that are linked on video and mine came with 2 cables ? For each fan

[@JeffTheITGuy]

Yes

[@mikediz2775]

Let me rephrase that one fan has two wires coming out the rgb how do I connect this.

[@JeffTheITGuy]

@@mikediz2775 one should be to the Mobo and one is to daisy chain to other fans

[@mikediz2775]

Link is for rgb pro 3 pack and they did not work on my 30l sadly

[@gianarmenta6111]

hey man i bought the sp120 but can’t seem to make all the fans run together. is there a software that you use to make them run together. Also have the same 30l omen

[@sheilawilliams2940]

Hi @Jeff The IT Guy, I am trying to find a solution to my newly bought HP OMEN 30L's overheating. The CoolMaster website says there fans are rpm 4500. Which is way more than any of the corsair. So how can the Corsair be an upgrade? Or am I looking at this wrong? Thx

[@JeffTheITGuy]

RPM does not determine how good a fan cools. There is a lot that goes into it, such as fan design, number of fins, angle of the fins, etc. The fans in the Omen have low static pressure ( ability to push/pull air through something) which hinders their ability to move air in and out of the case. Also, I am sure your CPU is what is overheating and the stock cooler sucks

[@EvalastingBeef]

Hey IT guy I still have both stock fans in my 30L I loved the tutorial but I seen that your fan in the middle and top have also been swapped out. Mind if I ask what fans those are cause I would love to upgrade this atrocious stock cooling

[@JeffTheITGuy]

Hey I changed the CPU to the Corsair ML120 Liquid cooler and I put a Corsair SP120 on the radiator. The rear fan is a Noctua 92mm and the front is another SP120

[@randomcsorely]

My 30L has 3 fans

[@mr.dodosoft6952]

Hi Jeff, are you able to configure the RGB for the SP120 on iCUE with no issues? Did you have to plug it into a USB header on the motherboard?

[@JeffTheITGuy]

The SP120 that I used didn’t have RGB. It was a Pre RGB model. The new ones require the commander device that connects via a RGB lead.

[@goldenone2004]

I highly recommend switching the radiator fan to an intake I am using a noctua instead of stock and have as an intake on my i9 10900k with rtx3080 went from cpu temps of 50idle and up to 96c under load switched the fans to intake and now me idle is 43 and I’ve only seen it get up to 78c so far under load extremely effective I almost bought a whole new case but this has more than exceeded my expectations over 30c drop for me with noctua fans intake on 120mm radiator 92mm be quiet exhaust fan and Corsair rgb fan as the intake completely solved the temperature issues for me in the omen 30l for under 100$

[@goldenone2004]

When using the radiator fan as an exhaust it is using the hot air that the gpu is pushing out to “cool” the radiator switching to intake just makes sense to me and I’m more than happy with the results

[@JeffTheITGuy]

@@goldenone2004 so you are using the front fan as an intake and the rad fan as an intake and the 92mm as exhaust?

[@goldenone2004]

@@JeffTheITGuy yes it’s working great

[@ZGib-bn2uu]

Weird. That’s not how radiator fans are designed to work. The heat from the CPU is transferred to the radiator via the liquid and the heat is rejected to the outside of the case by the air moved from the exhaust fan. (I’m an HVAC contractor BTW.) But you may have accidentally stumbled into a decent theory…. What may be happening is you’re taking the room air (much cooler air than the air in the case) and running it across the radiator which allows more heat to be absorbed from the AIO radiator. You’re rejecting that heat into the case, which can’t be good, but then it is almost immediately removed by the 92mm fan. I might have to give this a shot and see what happens.

[@J.R.F.23]

Jeff, I am assuming in your links you have the correct sizes, since you said the specs on the PC, were wrong.

[@JeffTheITGuy]

The links are correct, many have used them.I made sure to correct them

[@L_Emir_de_Passy]

Question: the fan recommended to replace the AOI cooler fan is rated at 1500 RPM and 52CFM. the fan that is in the OMEN 30L rotates at 4500RPM. Could the Corsair pull as much air while rotating at 1/3 of the speed?

[@JeffTheITGuy]

Speed does not make the fan, however, if you are worried about fan speed. You can get some high RPM Corsairs or Noctuas

[@L_Emir_de_Passy]

@@JeffTheITGuy thanks for the reply... Not too concerned about speed or noise. Just temperature... I tried a noctua (1500rpm and 52cfm) and had to uninstall as my PC kept shutting down. CPU temps in the high 90's C pretty constantly...

[@JeffTheITGuy]

@@L_Emir_de_Passy is that with the liquid cooler?

[@L_Emir_de_Passy]

@@JeffTheITGuy yes. Omen 30l

[@Gurupodcastreviews]

Get the noctua brown fans they are more expensive but seem to be the best you get what you pay for

[@L_Emir_de_Passy]

how do we take off the side panel?

[@JeffTheITGuy]

There is a screw that is by the power supply then you have to pry the side panel forward then off

[@L_Emir_de_Passy]

@@JeffTheITGuy thanks. I looked up an HP video and all i had to do is press the internal access button... I think i confused the glass panel and the side panel.. thanks

[@andyclift6481]

Do you think i should replace the stock fans and purchase an additional top fan. Or is that redundant?

[@JeffTheITGuy]

If you are low on funds get that top fan, if you aren’t replace them all

[@andyclift6481]

@@JeffTheITGuy awesome, gonna plan to replace them all!

[@oOPTICKZz]

How is the powersupply in this, worth upgrading or is it ok?

[@JeffTheITGuy]

It's a good PSU, doesn't have many watts though. I think it is 450w Gold made by Cooler Master

[@jaskomedencevic1405]

I have an omen 25L as well. I bought the corsair QL 120mm fans. I have everything plugged in, but when I open the iCUE software it says it does not detected the controller. By any chance do you know why?

[@JeffTheITGuy]

Did you receive a Corsair commander with the QL fans?

[@jaskomedencevic1405]

I had to buy my own. The fans with a rgb hub. But the fans turn on and light up but when I go into the software it says no device detected. I have everything plugged and I unplugged and plugged everything in and still nothing.

[@jaskomedencevic1405]

@@JeffTheITGuy I looked online and everyone said that I can use any fan hub if I do not want to spend more money on the Corsair one.

[@JeffTheITGuy]

@@jaskomedencevic1405 yeah I believe the Corsair one is requires

[@jaskomedencevic1405]

@@JeffTheITGuy The guy I was watching used a random one from amzon. So I am not too sure. I'll go look around and see what I can find out. Thank you for your help.

[@adrianbobrowski5629]

Can input a link to these fans

[@vladigallos]

We can use any type of fans? Does it matter for omen prebuilt pcs?

[@JeffTheITGuy]

Yeah use any fan you want

[@pfc4688]

Good vid bro, because im a little slow could you write down the sizes of each fan pls

[@JeffTheITGuy]

120mm in the front, 120mm in the top, 92mm in the rear.

[@Michael-nt1vp]

Great video! Do you know if the stock fan for the cpu on the omen 30l is also 120mm? I want lower temps but messing with the motherboard for liquid cooling is a little too intimidating for me so i figured I would just replace the stock fan for a better one.

[@JeffTheITGuy]

The stock fan on the cpu cooler is 80mm. You can add a new fan to the front of the case and add a fan to the top and get much better cooling. Also adding the Noctua 90mm I believe (it’s in the description) can help a ton. The stock fans are junk

[@Michael-nt1vp]

@@JeffTheITGuy ok, thanks a ton

[@JeffTheITGuy]

@@Michael-nt1vp you’re welcome

[@flake8114]

Quick question so both the fan for the aio and front are 120mm and the rear 92mm?

[@JeffTheITGuy]

Correct!

[@flake8114]

@@JeffTheITGuy Im thinking about getting the NF-A12x25 PWM chromax for the two 120mm and the NF-a9 chromax pwm for the 92mm one. Do you think these would be a good combo and reduce the temps by a lot? Other better options?

[@JeffTheITGuy]

@@flake8114 oh yeah the chromax Noctua fans are as good as they get.

[@flake8114]

@@JeffTheITGuy Also last question are that fan good for radiators aswell? Heard you need some type of static pressure ones

[@JeffTheITGuy]

@@flake8114 they are great all around. I typically use Noctua for all of my high end builds. They are silent, have great static pressure and great airflow.

[@christophermiller5850]

Hey Jeff, I had a quick question with the Rgb rans and the cooler master cooler, in my omen I have a 5 pin connector and the fans I bought in your link have 4 holes for the connection, is there some type of adapter out there to make it where my rgb will still function, thank you for all the help since I’ve put these upgrades in my computer it runs so much better

[@JeffTheITGuy]

There have been some folks who have gotten the RGB to work in the comments, if you have the time, I would take a look and see some of their solutions.

[@deybysp1]

i havent even recieved my omen 30l pc with i9 11700k 3080 ti and cant wait to upgrade it

[@JeffTheITGuy]

It should come with an AIO pre-installed, the fans in the Omen suck, and can definitely use some replacing.

[@jeremyhayes1242]

Did the ambient temperature in the room decrease possibly causing some of the decrease in the case? I know that my temps are cooler in the winter than in the summer with the same PC and same AIO. I did not change the fans.

[@JeffTheITGuy]

Same temp. I did the test on the same day,same room, same temp.

[@jeremyhayes1242]

@@JeffTheITGuy very cool. It’s good to know the front and probably the AIO fan can make a big change in temps.

[@Gurupodcastreviews]

Are you going to lose the light effect on that front fan?

[@JeffTheITGuy]

Yeah. I put in non-rgb fans

[@chuckschweitzer491]

Do the Corsair 120 RBG work with the Omen MB or is intervention needed

[@JeffTheITGuy]

Intervention is needed

[@chuckschweitzer491]

@@JeffTheITGuy But if you get the single color fans that one color will work correct

[@JeffTheITGuy]

@@chuckschweitzer491 yes correct

[@adrianbobrowski5629]

Can u put a link to where to find the fans

[@JeffTheITGuy]

The links should be in the description

[@eSRegretz]

is the one on the top of the case an exhaust or intake?

[@JeffTheITGuy]

I use it as exhaust

[@sleiao8632]

Where can we buy that tool kit

[@JeffTheITGuy]

Amazon

[@nicole8278]

Hey Jeff! I just got the HP AMD Ryzen 7 desktop (uses a liquid cooling fan unit)...and plan on changing the fans out with the LL120 Corsair fans (comes in a pack of three - so I plan on adding an extra one as an exhaust type fan) my question is...will these models work at reducing temps or does it need to be the SP? The corsair LL120 shows 600-1500 RPM... Your video was very helpful - I am just not sure if these fans will work for the AMD ryzen 7 model. I have no problem returning them if there is something better!

[@JeffTheITGuy]

The LLs will help. Be mindful of the RGB. I think the LLs come with a commander but you may need one

[@nicole8278]

@@JeffTheITGuy Thanks for the reply...so purchasing non rgb fans would help solve the rgb problem?

[@JeffTheITGuy]

@@nicole8278 yeah

[@josesannicolas6037]

Are the fan 3 pins or 4

[@JeffTheITGuy]

Three pin I believe

[@josesannicolas6037]

So the omen 30l is 4 pin I connected everything but the rbg is the only thing not working. The rbg connector does not match up with the omen connector? Any ideas why the lights don’t work?

[@TheDailyDabular]

Would a 500w psu handle the upgrades to the fans and the aio cooler or do I need to upgrade it? Thank you in advance!

[@JeffTheITGuy]

500w is fine for the fans and AIO

[@TheDailyDabular]

@@JeffTheITGuy awesome thank you! I’ve been having temp problems so I decided to upgrade to the coolermaster AIO and upgrade fans. Hopefully watching your videos will help me do this myself.

[@JeffTheITGuy]

@@TheDailyDabular they have helped quite a few other folks. I can’t say how many for sure but in the thousands I’d guess. Good Luck!!!!

[@TheDailyDabular]

@@JeffTheITGuy Perfect! I have one more question. Did you keep the rear/top as exhaust fans and only have the one intake fan?

[@JeffTheITGuy]

@@TheDailyDabular yeah, I did the top as an exhaust because heat rises and to me it seems like it can help dissipate more heat from the whole case

[@AngelHernandez-uf5vy]

For the rgb for the front fan where was it connected?

[@JeffTheITGuy]

The front fan RGB lead is connected to the daughter board at the bottom of the case

[@Heelchris]

Is the stock front fan an intake or exhaust?

[@JeffTheITGuy]

Intake

[@Heelchris]

@@JeffTheITGuy thank you!

[@JeffTheITGuy]

@@Heelchris you’re welcome

[@dominicmussomele3260]

i got the corsair 120 mm RGB fan for the top would i need a slitter for mine ? it wont fit the one hanging out top of case

[@JeffTheITGuy]

Yeah you do

[@dominicmussomele3260]

@@JeffTheITGuy do you know which one ? the one coming out the top has 4 pins and the fan has 4 slots but they aren’t lining up

[@JeffTheITGuy]

@@dominicmussomele3260 is the fan a male or female? Meaning does it have pins coming out for the fan

[@dominicmussomele3260]

@@JeffTheITGuy no it doesn’t so female right ?

[@JeffTheITGuy]

@@dominicmussomele3260 yeah that would mean it is female so you need a female to female extension. It will have pins on both sidea

[@secrett533]

can I still control my front fan rgb through omen up?

[@JeffTheITGuy]

If you change the front fan you can’t control it unless you use a new Mobo

[@juannava6611]

Where did you install the fan that was on the right side in the beginning of the video? I thought it was going to go on the back sorry I’m a bit confused.

[@JeffTheITGuy]

Which fan? The one in the rear or the front of the case?

[@juannava6611]

@@JeffTheITGuy the rear of the case.

[@JeffTheITGuy]

@@juannava6611 yeah I didn’t go back and do it, I didn’t have the right fan at the time. It’s a 90mm fan that is needes

[@juannava6611]

@@JeffTheITGuy oh okay thank you! Just to be sure it’s 90mm and not 92mm?

[@JeffTheITGuy]

@@juannava6611 sorry it’s 92mm. It’s the Noctua that is linked in the description

[@jesseandrewofficial1599]

How did u make the rbg on the aio cooler work? And also, is the original coolermaster psu that came with is is good?

[@JeffTheITGuy]

To get the RGB on the cooler to work you need a RGB make to make connector to connector to the spare lead that is in the top of the case

[@jesseandrewofficial1599]

@@JeffTheITGuy oo cool! Which 4 pin should i run for the plitter?

[@JeffTheITGuy]

@@jesseandrewofficial1599 the RGB on the cooler has a female connector and the extra lead in the case is a female. So get the male extension and run it to both

[@nunomgvaz]

Hi Jeff! Does the SP120 RGB led work on this build?

[@JeffTheITGuy]

Yeah

[@nunomgvaz]

Thanks @@JeffTheITGuy ! I saw some guys sayin that HP motherboards LEDs work different and wont light up.

[@JeffTheITGuy]

@@nunomgvaz oh you meant the actual RGB. Um SP120 LED will work because it isn’t RGB

[@nunomgvaz]

@@JeffTheITGuy yea, I meant LED RGB yea, this one: www.pcdiga.com/componentes/fans/ventoinhas/ventoinha-120mm-corsair-1400rpm-icue-sp120-rgb-pro-performance-3-pinos-co-9050093-ww (sorry for the portuguese website) - I want to trade the front one for a corsair like you did, but I don't want to loose the LED. Is it possible?

[@nunomgvaz]

hmm... another doubt... isn't the SP120RGB 3-pin? And the connector for the OMEN 4-pin?

[@dimmacommunication]

By personal testing I've found that Arctic P14 fans give a great advantage over other fans (expecially with dust filters)

[@Derek2k]

Thank you. I needed more opinions and I’ve searched online and yours is most prominent

[@dimmacommunication]

@@Derek2k P14 fans just have HUGE edge on other fans, even F14 fans from actic.

[@samiam9059]

Arctic are always a great choice generally

[@dimmacommunication]

@@samiam9059 not the p140 tho

[@samiam9059]

@@dimmacommunication Doh!

[@frynbryan]

Are the fan headers on the mobo 3 or 4 pin?

[@JeffTheITGuy]

It uses a USB header from a daughter board.

[@jschnabelgaming]

What size fan should I get for the front fan?

[@JeffTheITGuy]

120mm

[@jschnabelgaming]

@@JeffTheITGuy can it be any 120mm? And companies are the best at making case fans?

[@JeffTheITGuy]

@@jschnabelgaming yeah a 120mm. One that doesn’t have a long tube for the screw but that you can fit a screwdriver in to

[@jschnabelgaming]

@@JeffTheITGuy what company should I consider I know Corsair and Coor Master are pretty good are they any others?

[@JeffTheITGuy]

@@jschnabelgaming cooler master, Corsair, noctua, be quiet, phanteks

[@corphur]

Thanks for the video. Curious how did you get the liquid cooler attached to the top of the case. Mine is air cooled but when trying to upgrade to liquid no place to mount the radiator. There is a metal plate there!! Blocking the air flow. I took that off but no mounting holes for rad and fans. Did your 30l come with liquid cooling?thanks

[@JeffTheITGuy]

My plate had 4 punch out plates and you punched those metal plates out and it makes a cross pattern and you attach the cooler there.

[@corphur]

@@JeffTheITGuy yeah!! I figured that out later after I had posted the comment lol. Wasn't extremely obvious but thx 😅!! I wish this thing had back plate access!! Still putting off this project.

[@p3pales]

Hey great video! I can count 3 fans, you said there were 4 fans SP120 on the radiator and ML120 on the liquid cooler but it doesn't show in the video.

[@JeffTheITGuy]

2 fans on the Radiator, one in the rear, and one in the front.

[@p3pales]

@@JeffTheITGuy yes but un the video you just install 1 fan on the radiator could you point where the second one?

[@JeffTheITGuy]

@@p3pales sorry it is one per side of the radiator

[@p3pales]

@@JeffTheITGuy but where do you plug the extra fan on the mobo? I don't have enough connections on the mobo its a 30l omen

[@JeffTheITGuy]

@@p3pales you’ll need a fan splitter. I believe I mention that in the video

[@SmooreMC85]

Would these happen to work with a fan deck by chance? I'd love to have some exterior knobs to fiddle with. I currently have a stick AIO cooled 10700k with the 3070 30l. Either way I think I'll be mimicking what you've done with yours. Great video!

[@JeffTheITGuy]

Not sure if it’ll work with a fan deck or not. It may, never tried. Thanks for watching. If you give the fan deck a try let me know!

[@SmooreMC85]

@@JeffTheITGuy will do. I'm a little hesitant to try the fan deck without a guide and will probably just pick up the fans you point to in your description and the h60 AIO. The coolermaster you installed in that other video is sold out at the moment. Unless you'd suggest not to? I have built my own rigs in the past, but with the main components being so hard to get now. This is my first prebuilt machine in about two decades. It's been a learning experience to be sure and these guides are super helpful.

[@JeffTheITGuy]

@@SmooreMC85 yeah the NZXT M22 and the Corsair H60 work

[@domkeno1211]

It looks like there is room to add another fan in the front panel above the original fan is that possible with the motherboard?

[@JeffTheITGuy]

There isn't room, it is sealed off and has hard drive cages behind it. If you mean on top, there is no ventilation

[@thizzkid4life]

About to give this a try👍

[@thizzkid4life]

What would you recommend for the back fan?

[@JeffTheITGuy]

@@thizzkid4life The 92mm? The noctua in the description

[@heartofthehide157]

I cant find the corsair fans you used? Also love your upgrade videos most helpful thing ever.

[@JeffTheITGuy]

They are discontinued the new ones are LED

[@heartofthehide157]

@@JeffTheITGuy Oh ok makes sense. Im trying to find a better alternative thats quiet and isnt price marked up with rgb lighting or led. suggestions? wish i could get yours

[@JeffTheITGuy]

@@heartofthehide157 Noctua Redux 120mm. I use them in other builds

[@heartofthehide157]

@@JeffTheITGuy Thank you so much. You couldn't be a better tech youtuber keep up the amazing content bro

[@JeffTheITGuy]

@@heartofthehide157 thanks!

[@Kenzo9063]

also the rear fan should be an intake so it can direct fresh cool air from outside into the aio.

[@JeffTheITGuy]

Then it messes with the pressure in the case. You would have to swap the back 92mm to be intake and the front to be exhaust. They way that it is done here causes a natural flow of the air and allows for air to move over the VRMs. More to cooling that just the chip.

[@ightson7216]

@@JeffTheITGuy yo bro does the CORSAIR - iCUE SP120 RGB PRO 120mm System Cabinet Fan Kit with RGB Lighting - Black/White work for the HP Omen 30L gaming desktop

[@JeffTheITGuy]

@@ightson7216 yeah should

[@ightson7216]

@@JeffTheITGuy thanks

[@justdelirious5685]

Should I replace psu before I do this or am I ok

[@justdelirious5685]

Also are these fans just that bad that my cpu runs at 75-82 degrees Celsius in games

[@JeffTheITGuy]

@@justdelirious5685 you don’t have to replace the PSU first and yeah, the fans are that bad

[@justdelirious5685]

@@JeffTheITGuy so is omen command temp right because omen command and speedFan have the same temps but Ryzen master and Hwinfo are they same but omen and speed fan are 80s and Ryzen master and hwinfo are 60s to 70s

[@JeffTheITGuy]

@@justdelirious5685 I’d trust Ryzen master and HWinfo over omen command

[@justdelirious5685]

@@JeffTheITGuy so is speed fan wrong to. Also last question should I replace the cpu fan and put new fans in to

[@R.Luckey]

Great video! One question tho, my gpu temp is around 60-70C. While playing games my found sounds extremely loud and fans spinning around 3000RPM will replacing these fans help reduce the loud fan sound significantly? I love the PC and would hate to get rid of it due to some annoying sound. Thanks!!!

[@JeffTheITGuy]

Yeah makes a huge difference

[@EmersonSalmeron]

This guy says one number and the screen says something else, too confusing

[@JeffTheITGuy]

What was different?

[@shivandana]

Noice, toit

[@BriefNerdOriginal]

2 screws to screw you up. That easy

[@JeffTheITGuy]

Word

[@jamesf8536]

bro didnt even show the finished product after that whole fucking video

[@JeffTheITGuy]

To be fair,you can’t really see the front fan when it is installed, the top fan you could see after the install and such. I get your pain however, I will do better

[@ernestmitchell4452]

I have a questions what power supply power output is in that Cooling Master. I plan on upgrading my RAM, add three cooling fans, and a liquid cooler to my 25L. It says in product specs I have a 550 Watt. Will I need to ungrade to 750 Watt?

[@JeffTheITGuy]

550w is ok for that.