HP Printer Error 59.F0 Fix ON HP COLOR LASERJET PRO M452DW, M377DW, M477FNW, M477FDN, M477FDW

[@mikhailzolotov99]

Worked for me, the only thing that may help to others is that basically it is an upgrade of the soft inside the printer. Don't eject the flash, let it upgrade. Worked from the second try. Thank you. You saved my time and money.

[@SIA4TECH]

Thank you very much for your info

[@mikebuyshousesfast3427]

I had the same issue and followed your instructions. IT WORKED!!!! Thank you so much for your post. This has bought me a bunch of time and delayed the need for an unreasonably expensive repair of which the cause is unknown since it's a generic error, and delayed the need to purchase a new printer prematurely.

[@SIA4TECH]

Thank you very much for your kind comment much appreciated and so happy that it worked foryou

[@stevehundley7025]

This works! I inserted the flash drive, did the Print document part, rebooted with the flash drive still in. When it came on, it did its upgrade and now its working like a charm. Thank you SIA!

[@SIA4TECH]

So happy that it worked for you :)

[@jerrycrow4901]

I have been fighting this problem for WAY too long. Today I'd had enough, after every invoice I printed it gave code and I had to restart printer. Some days were horrible, other days it was not too bad. Last two days it's been continuous. I came to YT to look to see if it was an easy fix (why I hadn't done it before now is beyond me), I found this video and did the update. Printer worked flawlessly the rest of the day!!! I'm beyond happy it was something so simple.

[@SIA4TECH]

We are happy that we were able to assist you

[@ShonaCre]

Thank you so much!! I was super skeptical about downloading the file but it worked for me first try. I didn't reformat the USB, just loaded the .prn file onto a small USB stick and followed your instructions and now my printer is working again after MONTHS. THANK YOU!

[@SIA4TECH]

So happy it helped you ✌️

[@FunckyBob]

I don't usually comment of these types of videos but this actually worked for me and saved my office a headache. Thanks!

[@SIA4TECH]

Thank you for your comment

[@mikemalloy4903]

I've been ignoring this error and rebooting my M477dw for months. Finally searched and found this solution! I had to run the update twice to get it to take, but the second time it worked and so far no errors! Thank you SIA FOR TECH!

[@SIA4TECH]

So happy it worked for you 😇

[@JorHen91]

Hero!!! Thank you. I had to try it 2 times in a row and then it was rebooting automatically. Thank you so much for your help!

[@SIA4TECH]

So happy that it helped you thank you for yourfeedback

[@karinstuivenberg6779]

Thank you so very very much!!!! Tried everything, was almost trowing the printer away untill I saw your video and wanted to try one last time. It worked the second time!! Again thank you!! x

[@SIA4TECH]

So happy it worked for you as well, thank you for comment

[@brandyharrington6254]

It worked great! With mine, just in case someone else has issues, the error would come up when I would attempt to run the upgrade. I unplugged the power cord both from the wall and the back of the printer, waited 15 seconds, and then plugged it all back in. The error did not come back so I was able to run the upgrade. Now my printer is back to normal! Thanks for the help and God bless! :)

[@SIA4TECH]

Your most welcome and thank you for taking time to write this advise

[@VtoGames]

It worked very well on my m452dw, I really appreciate your help, a hug from Brazil for you and your family!

[@SIA4TECH]

Thank you very much for your kind feed back, a big love form Kurdistan of iraq :)

[@roneshilian2203]

I called HP & failed to get any help. I was hesitant to use this application but I did not want to pay $550, for a new Lasor Jet printer. This worked the first time and has not failed. Thank you very much! Ron

[@SIA4TECH]

Im happy that it worked for you ✌️

[@nicalus18]

My first attempt with the printer didn't work but the second attempt worked great! Thank you for putting this out there! After the printer says it's printing it should switch over to saying upgrading the printer within maybe 30 seconds. If it doesn't turn the printer off and try again.

[@SIA4TECH]

Thank you very much for sharing your experience

[@GiniBarnett]

Awesome help video! Completely solved my printer problem!! Struggle for month, literally, and had reached point of desperation--Thank you so much!!

[@SIA4TECH]

So happy it worked for you :)

[@rayding3953]

It's working for me, saved me $700 to buy a new printer, thank you!

[@SIA4TECH]

So happy that this video helped you

[@c.reneecourtney5171]

My HP MFP M477FDN had been getting the 59.F0 error now and then and a restart would fix it, but it increasingly got worse until it would only print a sheet or two and go back to error state. I looked for a solution and found this video! Like most others it took two tries to work. The first time it went back to the error and upon restart it said to resend upgrade. The second time I inserted the drive it stated receiving upgrade and is now functioning normally again. Thank you so much for this!

[@SIA4TECH]

So happy it worked and solved your issue :)

[@judymaster9543]

This was SO helpful and solved the problem ridiculously easily. THANK YOU!!!

[@SIA4TECH]

So happy it helped you

[@karensalcedo2365]

I did it! 😄 (Worked on the 1st try.) Thank you so much for the great video instructions!!!😊 Now, I just hope that code stays away...

[@SIA4TECH]

So happy it worked for you:)

[@tomkan425]

Man, it worked for me as well ( M477fdw). Thank you a lot for sharing it with us! It's a pity I didn't had it few years ago when it happens with my last unit, the service told me it's too expensive to fix, better buy a new one...

[@SIA4TECH]

Happy it helped you :) and thank you for the feed back

[@deborahscott1220]

This fix saved my printer's existence. I was going to throw it out. It was excellent and understandable.

[@SIA4TECH]

So happy it helped you

[@VS-if9or]

Excellent!! I've been having trouble with this error on my printer for a couple of weeks, and your video was helpful in fixing it. Thanks!

[@SIA4TECH]

So happy it worked for you :)

[@pierrebastin8219]

M452nw back to live thanks to your tip, many many thanks !!!

[@SIA4TECH]

Good news :)

[@richardlewis787]

Thank you for the video. I was having this problem for awhile. This fixed it no problem. Thank again.

[@SIA4TECH]

Thank you very much for your feedback

[@RajeevSharma-nn6lx]

Really Helpful link , followed the steps , first time used 32 GB , it didnt work , then bought 16 gb and it worked , the problem is fixed Thanks bro SIA FOR TECH , Saved USD 800 from buying the new printed

[@SIA4TECH]

Sometimes you have to try two or three times , each time you have to shutdown the printer

[@african98]

Thank you very much for the fix as it worked as posted on video. Appreciate your help.😃😃

[@SIA4TECH]

Thank you for your kind feed back im happy it helped you👍👍

[@andyj7447]

Thank you, This worked for my M477FNW.

[@SIA4TECH]

Your welcome

[@Kaja_Ostrzolek]

You saved my life with this !!!! second time it worked but doesnt matter :D good that works :) Thank you so much

[@SIA4TECH]

Your most welcome, yea for most it worked the second try… thank you for the feed back

[@arunajames7130]

Hey- this worked perfectly. Thanks a lot and wish you all the best! Nice one.

[@SIA4TECH]

Thank you very much for your nice words. I am so happy that it helped you.

[@RandallTribe]

You have got to be kidding... that was so easy. The hard part was finding an unencrypted memory stick that could be formatted correctly. Thank you so much!

[@SIA4TECH]

You welcome dear

[@umimakawa5014]

Thank you so much, this has helped. couldn't leave without giving a like and comment

[@SIA4TECH]

Thank you very much for your kind comment

[@AkiAli-e3g]

I never comment, I don't get involved but took the chance and you my friend are a legend, thank you! :)

[@SIA4TECH]

Thank you for writing this, it is always good to write your feed back either to encourage or improve the services Regards

[@canuslu6891]

Worked like a charm - thanks a lot!!!

[@SIA4TECH]

Congrats!!!✌️

[@harlexshakur.4793]

This worked for my M47fdw! Many Thanks!

[@SIA4TECH]

Hapyy it worked !

[@zahidc3145]

Thanks working so far with this fix...👍🏻

[@SIA4TECH]

Hope it will not have issue again 👍

[@karineCECE]

Merci beaucoup pour ce tuto très utile qui nous fait économiser de l'argent :)

[@SIA4TECH]

De nada querida, estoy muy feliz de que te haya ayudado.

[@tadiwamwenje6805]

It works 100%. Thank you. its 2024 and the solution worked

[@SIA4TECH]

So happy it helped you :)

[@MaikS86]

Super - Danke - Endlich mal ein Lösungsweg der wirklich funktioniert

[@SIA4TECH]

You welcome

[@juliemckendrick4970]

I can not believe this worked! TY so so much

[@SIA4TECH]

So happy it worked for you too

[@CarltonBariatrics]

Thank you - this was very easy to follow and worked! It didn't work the first time - I had to do twice but then it worked.

[@SIA4TECH]

Thank you very much for your feed back

[@nikki7_22]

Thank you sooooooooooo much. It fixed it instantly, Idk what I would do if I didn't find this video.

[@SIA4TECH]

Thank you and happy that helped you

[@rdbo]

Thanks chief. Worked for me. ***AT THE END.. AFTER YOU PRESS "NO"... wait 10 seconds to see if it restarts.... if it doesn't restart, unplug the usb drive and it will restart

[@SIA4TECH]

Thank you very much for your kind feed back

[@daoistwanderer2671]

Thank you. It worked after second attempt.

[@SIA4TECH]

Very good

[@ahmadodeh662]

Like the others. It took a couple tries, but it worked a charm. Thanks you very much.

[@SIA4TECH]

Thank you for the feedback

[@himahamid]

Awesome ! Completely solved my printer problem

[@SIA4TECH]

Very good congrats

[@marcovillagranaescobedo4012]

It works!! thanx my friend. Greetings from México.

[@SIA4TECH]

Muchas gracias por el Kurdistán de Irak.

[@enyinniachiemeziem8343]

It worked perfectly well. Thank u very much.

[@SIA4TECH]

You welcome

[@markoxminipro]

Huuuh....Thanks man...I also fix my HP Color LaserJet Pro MFP M377dw just now!!

[@SIA4TECH]

Great good news!

[@reseirs]

so far working for m452dn after 3 prints, let's hope it continues. thanks for the tip

[@SIA4TECH]

It will continue working inshallah

[@paulomariotto]

Congratulations friend, recent video lesson, it helped a lot, thank you for the video! from Brazil!

[@SIA4TECH]

All respect to you and all Brazilian 🇧🇷

[@anonymoussender-r3u]

THANKS IT WORK FROM NIGERIA

[@SIA4TECH]

You welcome

[@soukhengonsavanh1024]

there is working thank you a lot👍👍👍

[@SIA4TECH]

Thank you very much

[@jeffvierra6609]

THANK YOU THANK YOU THANK YOU worked like a charm.

[@SIA4TECH]

You are most welcome

[@danielalban7064]

Your amazing, it works perfectly thanks

[@SIA4TECH]

Thank you very much

[@JeanclaudeNshimiye-p2m]

YOU A SAVIOR !!!

[@SIA4TECH]

Welcome

[@JesusNavarro-or5xl]

muchas gracias, si se resolvió el problema...abrazos desde México

[@SIA4TECH]

Tu más bienvenido y gran abrazo desde el Kurdistán de Irak.

[@nabinkhati5365]

thanks for information but its not working in Laserjet Pro 500 color MFP m570dw plz if u have any suggestion plz let me know

[@SIA4TECH]

You have to get the right frame where that’s why it is not working because the firm where I have a test is for different model

[@piotrchodoruk494]

Thank you for your help, it works!

[@SIA4TECH]

Happy it worked for you👌

[@Sasoon2006]

Can you confirm that the printer M477 will still be able to use non original toners after the upgrade?

[@SIA4TECH]

Sorry I can not, But i believe it will not affect

[@Sasoon2006]

@@SIA4TECH Thank you

[@jamesisilay3942]

Life saver, thanks!

[@SIA4TECH]

Your most welcome

[@TheJamisko]

Solution still working :) thanks Sia!

[@SIA4TECH]

Happy it worked for you:)

[@張文震]

It works for my M477fdw. Thanks a lot.

[@SIA4TECH]

Thank you

[@artzeric]

Thanks its work for me (2 reboots and its ok )

[@SIA4TECH]

So happy it worked for you:) and thank you for the feed back

[@sarahher7290]

Thank you! Works in Dec 2023.

[@SIA4TECH]

You welcome

[@lukasrendla3412]

Thanks a lot

[@SIA4TECH]

Thank you and Good luck!

[@naushadmahomed6919]

Hello would it work on printer M281fdw?

[@SIA4TECH]

You have to find the right firmware for your specific printer model

[@christiankieling9266]

Worked like a charm , Thank YOU!!!

[@SIA4TECH]

Great

[@petergikonyo8760]

thanks .. it worked for me as well

[@SIA4TECH]

You are most welcome

[@MichaelJones-fq6ry]

Fixed My Issue also thank you

[@SIA4TECH]

Your most welcome

[@heatherbronson-n4e]

It works just perfect thank you so much

[@SIA4TECH]

Your most welcome

[@dianeallen1475]

Wow! Worked like a charm. Thank you so much!

[@SIA4TECH]

happy that worked for you :)

[@xingyuanchen289]

How about the model without the touch screen ? It does not have a direct print file from usb function. Thanks.

[@SIA4TECH]

You have to get the right firmware

[@LauraGonzalez-jo8wh]

Woooo it works THANK YOU SO MUCH 💢💯💢

[@SIA4TECH]

Your most welcome

[@deantang1267]

Does it work for hp color laserjet m283fdw? Thanks

[@SIA4TECH]

Unfortunately, the attached file is only for the specific model. Same method may work if you get the proper firmware for your printer.

[@p4ulinh]

Does it work on m551 model

[@SIA4TECH]

You have to get the right firmware, the method may work

[@sewsports]

i did for MFP M277 dw but printer showing this error " USB device uses an unsupported file system. reformat the device using a FAT file system. " so did format the USB again but still same error so please suggest the solution ?

[@SIA4TECH]

If you can get an old and small size USB drive and format it as fat32, this happened to me as well try with another model of usb drive will be food

[@SIA4TECH]

If you can get an old and small size USB drive and format it as fat32, this happened to me as well try with another model of usb drive will be food

[@sewsports]

@@SIA4TECH yes did but after the same procedure of print showing same 59.CO error 😞

[@sewsports]

error had been solved but after print the file paper jamed and showing same error on the display l😞

[@SIA4TECH]

Some times you have to do it twice or more, if after 3 successful tries happened again then it mean you have hardware issue

[@the08wizard]

Worked for me, Thanks.

[@SIA4TECH]

Your most welcome

[@sallymohadeb3113]

Thank you!!!!!!!!!!!

[@SIA4TECH]

Most welcome

[@louriengarcia8997]

Hi i cant find the dccv1.prn download. Could you help me with this? Thanks

[@SIA4TECH]

In the description of the video there ate two links here is one of them, www.mediafire.com/file/k5rqp1f9rqzm7oi/DCCV1_51.prn_.zip/file

[@louriengarcia8997]

@@SIA4TECH hi thank you. But why its not working for me. Or maybe because our printer is MFP M570dn. 😔

[@SIA4TECH]

Unfortunately, the file was I attached is only working for the specific printer. It is not working for your printer. You have to find the correct firmware for your printer.

[@하와이아름다운교회]

Thank you So MUCH.

[@SIA4TECH]

Welcome

[@phaisebanda5607]

This is great I have been struggling with this problem but after applying what you have done, it has solved my problem. Thank you.

[@SIA4TECH]

So happy that it worked for you

[@MatthewKwan]

A big thanks to you, you have made my day. The solution is working great!

[@SIA4TECH]

You are most welcome. I’m so happy that you are able to fix your printer.

[@MatthewKwan]

The problem happened again today and I tried this method for more than 10 times now but the error did not go away. Any thoughts?

[@SIA4TECH]

Try to reset the printer to factory setting then try the method we explained

[@MatthewKwan]

@SIA4TECH You are so wonderful. My printer prints again after factory resetting. Thank you so much. 🙏🙏🙏

[@SIA4TECH]

I hope your issue is fixed for ever :)

[@abdullahchaudhry8319]

I have the same printer (hp laserjet pro 300 color mfp m375nw) and it's not picking up a page from either of the paper trays. When I reset the printer, it prints one page and then gets stuck again. Can you please suggest what could be causing this? Thanks

[@SIA4TECH]

I suggest to clean the roller something like it shown in this video Solve paper jam issue, How to clean HP scanner and prevent paper jam kzbin.info/www/bejne/mqGWf6huYr2eoZo

[@diasaidlv]

For me it worked not to restart it right away, but to keep it off for about 3-5 minutes. And then turn it on again - the error disappeared. I'm not sure if this solves the problem. But it allows you to print in any case

[@SIA4TECH]

Lets hope it solved the issue like the others :)

[@mdawas1986]

you saved it man, well done and many thanks

[@SIA4TECH]

You welcome dear

[@amauryg5250]

Very good. It works perfectly Thank you

[@SIA4TECH]

Thank you for the feed back

[@Warevar4ever]

thanks a lot. i did the same and it's working perfectly now. appreciate it.

[@SIA4TECH]

So happy that I was able to help :)

[@gizlikulanc5936]

Hello hp laserjet 400 color m400 59.C0 error how can i fix this

[@SIA4TECH]

You have to find the correct Firmware

[@gizlikulanc5936]

@@SIA4TECH I couldn't find it, please help. Çiyaz works, takes the paper, then gives the same error.

[@SIA4TECH]

I will try to find it, if i got it I will put it here

[@gizlikulanc5936]

@@SIA4TECH You are a very kind person, thank you.

[@SIA4TECH]

Try to use this method explained in this video kzbin.info/www/bejne/fKCkZqKiiNSdndksi=R2CkjZwS1-miTnr3

[@jaanjamali2468]

thanks for information 👍😀

[@SIA4TECH]

Welcome 😊

[@this1aintinuse]

Thank you.

[@SIA4TECH]

Your most welcome

[@Escuelademusicafranciscofrias]

EXCELENTE TRABAJO AMIGO

[@SIA4TECH]

You welcome

[@Florian_Ueberlebt_Australien]

I've tried this on a HP Laserjet 700 Color MFP M775, but it did not work. When plugging in the USB nothing happens. I rebooted the machine with the USB in, but still nothing. Any advice on this one?

[@SIA4TECH]

Unfortunately, this firmware is only supporting M 44X serious, I will have a look and update you in case I found the proper firmware

[@Florian_Ueberlebt_Australien]

​@SIA4TECH that would be amazing!! I don't want to have to throw it out as it's otherwise a great printer and I still have lots of cartridges, but unfortunately the service cost would be too huge to fix it.

[@benjaminclin4275]

It works! Thank you!

[@SIA4TECH]

You welcome

[@jzinformatica6171]

Good afternoon, I ran the file from your link and it went to the end as you show and after restarting it appears resend upgrade and clicking on (? ) says that the firmware update was interrupted and asks to resend the file, I already did it on the website from HP and it's not back to normal, what do I do?

[@SIA4TECH]

Sometimes you need to repeat the procedure two to three times this happened to me as well

[@jzinformatica6171]

@@SIA4TECH so it doesn't work, so now I loaded the pen driver and when it asked if I wanted to add a new file, I put no as you said, I tested it by putting yes, and then it opened to look for the file and then I pressed the back button and then it appeared (upgrading) Before nothing appeared, now it is working.

[@SIA4TECH]

Good to hear that it worked for you too :)

[@iselapalomino8576]

it works!! thank you!!

[@SIA4TECH]

Thank you

[@spyro9979]

you saved me 400 that a guy said you have to pay to replace thanks

[@SIA4TECH]

I am happy it worked for you

[@jns08d]

Random youtube vids for the win, this worked for me - had to "update" it twice but error went away

[@SIA4TECH]

Happy it worked for you

[@sageauk]

This has saved Me Thank you so much

[@SIA4TECH]

Glad it helped!

[@ChristianRodriguez-o7j]

Thank you. It works on my printer.

[@SIA4TECH]

Thank you

[@albertoo_saizz]

I have a hp cm4540 and I don't know where to fix the error 59.00. F0.. where do I give it? I give it to recover file from usb and it gives me that the file is not compatible

[@SIA4TECH]

you have to get the firmware for your model

[@albertoo_saizz]

@@SIA4TECH Could you tell me where to download it from? From your video I go to the link and save the file on USB, but on the printer it says unsupported file Thank you

[@SIA4TECH]

There is no specific location usually you have to google it, i will try to look for it for you too, if i got it i will send you the link but this coming week i will not be able du to limited access to internet

[@infotech4383]

The file not found in google drive, please sent it for me

[@SIA4TECH]

here is another link www.mediafire.com/file/k5rqp1f9rqzm7oi/DCCV1_51.prn_.zip/file