My printer was printing dirty spots and the cartridges were still 60% full. Running the cleaning page didn't work and cleaning the transfer belt didn't work. I used your video to just disassemble the cartridge and empty the waste toner. I just shook out the waste toner through the slot (no need to remove the screws for the blade) and brushed it off with a paint brush. After cleaning the waste toner, it printed cleanly and I don't have to replace my toner cartridges when there was plenty of toner left. So, if you are having problems with dots for streaks, try cleaning out the waste toner. There was a lot of waste in the red and blue cartridges.
@metrichsa964718 күн бұрын
Great job, thank you.
@organichubbytaaniya3 жыл бұрын
Just amazing. I learnt many new things in this video. Keep it up man
@lincolnfrancisco20383 жыл бұрын
i know it is quite randomly asking but do anybody know a good place to watch new series online?
@dylanbenedict35993 жыл бұрын
@Lincoln Francisco flixportal :P
@lincolnfrancisco20383 жыл бұрын
@Dylan Benedict Thank you, signed up and it seems like they got a lot of movies there =) I really appreciate it!
@dylanbenedict35993 жыл бұрын
@Lincoln Francisco No problem :)
@starink18283 жыл бұрын
It is a nice and useful video. Starink toner cartridge- start different.
@lisaorlena65934 жыл бұрын
Bravo complimenti 👏
@mashreqofficeequipmentsand1442 жыл бұрын
Well explained
@adetoyedamilola6130Ай бұрын
God bless you brother. I learned something new from you. Thanks Pls why does it take long to pick paper before printing pls help
@viandant5Ай бұрын
May be the job has great dimensions
@chrama602 жыл бұрын
Witch toner powder suitable for hp 131a black cartridge
@viandant52 жыл бұрын
You can use almost all HP color toner
@testing987319 ай бұрын
Can we fill cartridge with 2 or more than 1 packet of 60gm toner color? to get more pages to be printed out...?
@viandant59 ай бұрын
the chip will show you empty cartridge after a certain number of sheet, not important how much toner is left iside the cartridge
@testing987319 ай бұрын
@@viandant5 Thanks that makes sense. Can you plz tell me how much is that certain number of sheets for hp pro 200. 1000 or 1500 sheets?
@viandant59 ай бұрын
@@testing98731 2400 black, 1800 color
@testing987318 ай бұрын
@@viandant5 Thanks... black:2400 is ok but color: 1800..! Actually mine ‘hp pro 200 mfp276’ printer is printing 2000 pages from black, but after just 200-300 color prints the printer is showing empty cartridge msg. Is this is the issue of chip or anything else? I’m using Imaging plus Wt: 60gr color.
@testing987318 ай бұрын
@@viandant5 Thanks... black:2400 is ok but color: 1800..! Actually mine ‘hp pro 200 mfp276’ printer is printing 2000 pages from black, but after just 200-300 color prints the printer is showing empty cartridge msg. Is this is the issue of chip or anything else? I’m using Imaging plus Wt: 60gr color.
@DanBurgaud4 жыл бұрын
6:49 is it allowed to touch the drum with finger?
@viandant54 жыл бұрын
You can touch the edges of the drum, where there is not the image
@md.nizamuddinhaidar1178 Жыл бұрын
What causes the page to have long thin spots?
@viandant5 Жыл бұрын
It could be a defective recovery blade. Check the drum surface if there are little black lines, in case clean them with isopropil alcohol
@hillaryisiche46983 жыл бұрын
wonderful
@praiselungu4355 Жыл бұрын
Hello my printer keeps on saying replace catridge after i refilled help me please
@viandant5 Жыл бұрын
You have to change the chip too
@organichubbytaaniya3 жыл бұрын
Hey i recently Refilled My Hp laser 2025 toners but it constantly showing Magenta in wrong position. Can somebody help in fixing this error?
@viandant53 жыл бұрын
May be the side panel is not correcly installed. Try to disassemble and reassemble the cartridge
@organichubbytaaniya3 жыл бұрын
@@viandant5 i did it but error is remain same. Magenta in wrong position
@viandant53 жыл бұрын
@@organichubbytaaniya Check the contacts on the side of the cartridge and between printer and cartridge. They could be bent or out of position, or the connection with the main board could be defective