HP PRODESK 600G1 Tiny - Teardown and upgrades in 4K

[@breakfastwitherik]

Nice vid, learned some stuff

[@ComputerizedCanada]

Glad you enjoyed!

[@sundance2005]

You showed what CPU you took out, what did you replace it with or did you put the same one back in? What were the upgrades???

[@ComputerizedCanada]

It's just for showing the upgrade procedure, rather than a specific part upgrade.

[@ronwatkins5775]

Is there a list of compatible CPU's for this box? I have 2 of them and would love to get more than 4 cores.

[@chrisalves88]

Depends you bios firmware version with mainboard manual. There are the maximum and minimum memory and cpu supportable.

[@itsyaboivoid]

I unscrewed the thumb screw but cover will not come off

[@GabeCubeOfficial]

Do you know what graphics card it has

[@boxthirteen9862]

Is the Max RAM for this box 16GB (2x8GB)?

[@fmlazar]

So there isn't an M.2 slot below the HD cage?

[@ComputerizedCanada]

No not in this model.

[@OniiRem]

i think there is, under the fan and the hdd compartment, beside the sata power cable you can see it

[@markalnelmanalang8582]

Can i able to put a gpu on this mini pc?

[@pinetar_VR]

this was helpfull thank you.

[@ComputerizedCanada]

Glad it was helpful!

[@dr.zippymcscoots8725]

Just wondering. Does it have to use the "T" version of the cpu or can i use Core I5 6500 quadcore that i have available?

[@ComputerizedCanada]

The thermal design and power brick are designed for T-variant with 35W draw. If you use the full fat version you may run into overheat problems which cause throttling. If you really want to use it, I would suggest swapping the power brick for a 90W or more (the one I have comes with this PC is 65W), and test out the thermal dissipation.

[@dr.zippymcscoots8725]

@@ComputerizedCanada Thanks for the info. Ordered one off Ebay. See how it gos

[@christopherjames9843]

So what was the replacement cpu you installed?

[@ComputerizedCanada]

Hi, I don't remember but I think it was a Celeron I have on hand that fits the socket. The swap was just for demonstration, not strictly upgrading in that case.

[@fmlazar]

@@ComputerizedCanada That was why you didn't bother with thermal paste then.

[@giovannicruz100]

Hi, how wifi model you used?

[@thomasd2695]

Just buy a wifi usb

[@thelowprofile9767]

nice

[@ComputerizedCanada]

Thanks

[@chrisalves88]

Nice.