Hp Elitedesk 800 G1 case swap!

Follow me on Instagram,Twitter, and TikTok @dlmtechgarage
Link to 3d printed rear i/o
www.thingiverse.com/thing:391...
Hp elitedesk finds:
• More used parts deals!...
Hp Z240 case swap video:
• HP Z240 Case Swap Guid...
PSU adaptor:
www.amazon.com/gp/product/B06...
Jumper wire:
www.amazon.com/Kuman-Breadboa...
usb 3.0 header extender
www.amazon.com/gp/product/B01...

[@johno9163]

This video was a big help as I just did a case swap on my 800 G1 MB. The PSU adapter worked like a charm but I do have the USB warning when first booting but considering I leave the system on all day and the USB ports work fine, it is just a once a day annoyance. Other than that it is a sweet to have the MB in a much nicer case with a 600W PSU. I should have done this long ago. And it worked out even better as the thermal paste was getting pretty dry and needed to be replaced on the CPU and cooler. Thanks for the great video and all of the information on doing the swap!

[@adrianb5582]

thank you so much for making this, this exact model was actually given to us and i’ve been upgrading it slowly and on offer up for deals on parts for a budget build. and not gonna lie there’s something so hot and sexy bout recycling tech i think this computer shit might be a new hobby

[@DLMtechgarage]

I love refurbishing and bringing back to life old thrown out hardware. Fun to figure out the tricks!!

[@jrose-xp6tf]

I use those Arduino wires too, mostly for fan sensor jumping on older Optiplexes. I even made a 24 pin harness adapter out of them once years back, good vid man.

[@DLMtechgarage]

Thanks!!

[@half_r_mk5]

I followed ALL the guidelines here and it works. It has more room for cooling and also be able to put bigger GPU's. 👍👍 Thanks again for this guide.

[@TribbleBot]

I just picked up an i7 one of these at an auction for under $20. Now you've got me contemplating a swap into an old HP Pavilion case I have. 🤔🤔🤔

[@b0ne91]

I love, love love using HP ProDesk 400 (G1/G2) and 280 (G1/G2) upgrades. They take regular ATX power supplies (no adapters needed), support E3 Xeons and are EASILY turned into gaming PCs. Sometimes for longer GPUs, I dremel out a tiny piece of metal (second hard drive cage). I don't case swap, because it's not worth it imo (not until GPU prices allow me to turn them into $500 systems again). Those $250-300 systems with a $20 PSU and old GCN 1.0 cards are great entry level systems for a lot of kids.

[@DLMtechgarage]

GPU prices killed me on the budget builds...... for the sff i only do the case swap. the regualar matx I just throw in a gpu psu ssd and flip them easy!!.... before crazy graphics card prices ofcourse lol...

[@christianmino4073]

@@DLMtechgarage well we are here now!

[@4thwheel]

just get a cheap, older gpu (i recommend the amd ati radeon r5 340x) which has 2gb of ddr3, and it runs really well.@@DLMtechgarage

[@seriksson9721]

Very good and clear description. That's probably the right way to do it. Many good ideas and tips. Thanks so much.

[@DLMtechgarage]

Glad it was helpful!

[@koosvaneijck]

I did solder a wire back of the mobo for the pins to ground it so works

[@imalearnsya]

thanks for the jumper info having to press f1 was getting old after a day, i ended up throwing a 2060 super in mine via a vertical mount. Im a little bottle necked but its just a batocera emulator rig. Thanks again

[@JesusAramil]

Thank you for making these, i'm planning to upgrade my cpu case as well psu and adding gpu to it. Few upgrades on these model are hard to find on YT, now luckily find one how to do it. Thank you man!

[@DLMtechgarage]

Glad the video could help. Key tip!! make sure you buy the psu cable specific for the hp 800g1. if not then it won't power on. seen alot of guys run into that issue. the z240 and other variants require the same adaptor but have different pin outs.

[@JesusAramil]

@@DLMtechgarage I have a Mid Tower variant so shouldn't problem at all then making those jumpers and psu adapter, since the motherboard are the exact same from SFF one.

[@DLMtechgarage]

@@JesusAramil yup same thing!!

[@JesusAramil]

hello i bought a psu semi modular but sata power cable was missing is it okay to put the standard sata power cable on the motherboard?

[@DLMtechgarage]

@@JesusAramil yea you can use the ones on the board and it will work fine.

[@chilledbroccoli899]

hey mate this helped me, i have to fix a old cumputer that i cant find parts on, and this was a nice fix i found

[@keithmiller9665]

Another great video, I learnt a lot. Thank You!

[@DLMtechgarage]

Glad to hear it!

[@justbored3.14]

update to the my upgrade. i was having errors where the motherboard would not boot but that was because of the cable i purchased from newegg. purchased the one from your link and everything worked. then i was having the usb and front audio issues but i fixed that now i found the original cable from the chassis and now i have no errors and super fast boot up. i had to cut the chassis apart to get the backplate for the fan. i could of gone to the store to get nuts but i was already throwing away the case might as well recycle some of it.

[@DLMtechgarage]

I have done that too with the case and cut out that plate. glad everything worked out!

[@deejagers716]

i have same one with quadro p1000 , works great, most never games play without problems

[@labvr9721]

Sensational !! Thanks !! Mine helped exactly in the spots I needed!!

[@DLMtechgarage]

Awesome!!

[@deamondeathstone1]

Glad the g2 doesn't seem to need the jumpering.

[@TomTomSatnav87]

Awesome build pall, been waiting to see it since you mentioned it 😁 Can't wait too see wat you do with the next one... Have a couple of ideas for ya if ya interested but don't want to ruin anything incase you already thought of it lol 😂 love watching you give these computers new life buddy it's great 👍

[@DLMtechgarage]

Thanks, def please share, always open to viewers suggestions, you can post them here or email me at [e-mail], you can also check me out on instagram and twitter, i do more behind the scene and sneak peaks of upcoming stuff.

[@TomTomSatnav87]

@@DLMtechgarage oh brilliant, I'll send you an email as I don't have Twitter or Instagram lol 🙂👍

[@StephaanBOSS56]

Thank you for this helpfull video. I am an old man and I like funprojects like this. I have found a video to change the bios so it can start up from an NVME SSD plugged into an PCIE adapter. It can start up really fast then. I have it now in a nice little case from DeepCool with RGB fans, a 600 Watt PSU and a 6GB Msi geforce gtx 1060 6g armor GPU. Only thing I don't quiet get is how do I get rid of the USB warnings while I have my front USB ports working on this nice case.

[@stevenwilliams6638]

Great video man. Curious to see if you can use small wires , and solder jump those pins on the back side of the board , so you can still use the headers

[@DLMtechgarage]

you can, what i do is splice the jumper wires into the connector and you can still use the headers.

[@StephaanBOSS56]

@@DLMtechgarage How do you mean. I am in Belgium and no native English speaking person. Splice the jumper wires into the connector?

[@christopherrego8301]

I wish I saw this video before I got my dell 9020. Once i build it out, I wana try this hp out and try to sell some budget PCs in my area. Thanks you.

[@daviedlopulalan9882]

Thanks for usb 3.0 jumper and front panel setup.

[@Edwin-k7xZ]

I have a question about this style of adapter, I ordered one from Amazon that is supposed to work with many models. I got a new Thermaltake 500w psu and hooked it up to the HP G1 via the adapter, it boots but shuts off. I'm using the cases power button and the led turns red. It works perfectly fine with the stock psu.

[@manwithnousername9779]

Thank you man. You earned another sub!

[@DLMtechgarage]

Thanks for the sub!

[@CALLE92JOHANSSON]

Great video. I just picked up one of these to use as a htpc. Nice tip with deez nuts for the cpu cooler. Just to confirm, the motherboard is micro atx? Because I'm looking for a bigger Silverstone case for additional hdd bays.

[@DLMtechgarage]

Thanks, yup it is matx

[@wuyi8258]

hi mate, i would like to ask how did you put an extra exhaust fan on the modded build, if you can, can you drop the link to the adapter or something? thanks in advance man great video!

[@christopherlongo3459]

Great video case swap was successful I got everything working

[@DLMtechgarage]

Good to hear

[@SmokeMastaP]

@DLM tech garage Couldn't you use a AMD cooler mounting (AM3(+) or AM4)? I saw in a forum that someone modified (drilled new holes) an Noctua bracket to use it.

[@DLMtechgarage]

Anything is possible with a little modding

[@Csf91]

I'm doing exactly this, with the same power adapter, but when i try to turn on the computer all i get is a green blinking light. The only hint i have is a review with a similar issue that mentioned the standby signal being wrongfully sent, but didn't provide a solution for that. The HP I'm moving to a bigger case is a HP Elitedesk 800 G1 SFF, model number TPC-F046-SF. If i just plug the oriiginal PSU, the computer boots just fine, however if using the comeap adaptor and a normal PSU: When turning it on, it doesn't spin fans or anything, all you get is a green blinking led on the motherboard, steady and continous kind of blinking. The idea was to add a spare GPU i had to it, which is a HD7970, and the test have been done with 3 different PSUs and with or without the GPU, same exact result.

[@NightNurse3711]

Thanks so much for this! Computer works great but i get usb 2 error. Not usb 1 or 3 as mentioned? First timer

[@StephaanBOSS56]

I have usb 1.0 and 2.0 error

[@jacksonbtb571]

thank you for posting this, this is perfect timing for me. ive had one of these oems laying around and I wanted to try to utiize it in a cheap pc. since mine has a 240w psu, do you think that would power a 1050 ti (no external power) and an i7-4790?

[@DLMtechgarage]

yup would def run fine. I have gone that route and not had any issues. just the lp 1050ti a little too expensive.

[@quadinglelemon5773]

​​@@DLMtechgarage what will happen with the usb cable jumper wire thing does it mean i cant use any of the usb in my motherboard and case? and if i add a pcie x16 extender can i use a non lp gpu?

[@theshagmiester6320]

Great video! Just curious if this concept could work for the hp prodesk 600 g2? I'm mainly worried about that 24 pin to 6 pin adapter for the cpu power on the mobo. It seems like if I find the layouts for the mobo and get those grounding cables I can bypass front panel errors and do a case swap. Just worried about that adapter for the cpu power. Thank you for your time!🤘

[@DLMtechgarage]

it does. link to the adaptor www.amazon.com/YEZriler-Adapter-Sleeved-ProDesk-EliteDesk/dp/B0B2HVJZJ8/ref=sr_1_3?keywords=hp+prodesk+600+g2+power+supply+adapter&qid=1680731443&sprefix=hp+prodesk+600+g2+power+s%2Caps%2C94&sr=8-3

[@_drengr5701]

I have the HP EliteDesk 700 G1 (Mid-tower) and i am planning to put it inside of an m-atx case. The Mid-tower Version is op, because u can fit in a Full Size GTX 1050Ti without changing something. All i have to live with is one SATA Slot less and i needed to switch the way the CPU-Power cable is connected. Edit: Btw great and helpful video, even ur tips for the lots of pins and connectors!

[@DLMtechgarage]

yea i prefer the midtower versions. so much easier to upgrade. I like to mod them too, cut a window, some custom paint and they tend to sell quick. Appreciate the comment!!

[@_drengr5701]

@@DLMtechgarage Do u know if the adapter still fits in the 700 g1?

[@DLMtechgarage]

@@_drengr5701 not sure, have not been able to confirm it. i see that 600 and 800 have the adaptor. I will keep looking and let you know what I find. The adaptors vary on pin out and getting the wrong one causes issues.

[@peterlgonzalez]

Hello, using an ATX Case for 800 G1 SFF. The case/power supply has a USB 3.0 Cable. Now error is Front USB-2. How to we pin out to remove the "922 - Front USB error"? The same pin out to fix USB-1 doesn't work. Tower I have is (Bgears b-Voguish-RGB Gaming PC ATX case, Include: 6 x 120mm ARGB Fans, 1 x 10 Fans Controller, 1 x Remote Controller, USB3.0, Support up to EATX Motherboard, Support Graphic Card up to 380mm Long) from Amazon.

[@jimmyleonardopaz3460]

Será que el disipador de esa placa hp se puede utilizar en otra que no sea hp

[@ItzBeryy__]

I don't know what to do, I have a motherboard from an HP 8300 computer in the largest version (ATX), and my computer does not turn on, I tried to connect the start button like yours, but it didn't work, do you have any ideas?

[@JREYEZG23]

THNKS for the Video !😎👍

[@shephusted2714]

the bigger case just makes it so much easier to work on plus you can cram in more drives with a sata card - the 4th gen intel is decent and ddr3 is cheap - hp is solid - refurb value king - it blows away sbc.soc boards - no comparison - i think getting boards is best way to go - people probably want z440 v2 for max performance? the z420 is an option as well - can run 256gb ram

[@scr6p]

okay so i bought a pc case for 60 dolllars and it comes with a psu its a 360w psu but i have a hp prodesk 600g2 i didnt case swap it yet because idk if the psu connectors will work for the motherboard its complicated the motherboard has some pins for the 360w psu but not for the usb pins will it still boot up?

[@Stray_x]

Pretty smart stuff man. My local hardware store doesn't carry nuts small enough to mount these coolers, so I use zip ties and take the pins out of an Intel stock cooler.

[@DLMtechgarage]

Ive done that too with zip ties!

[@Stray_x]

@@DLMtechgarage with a sub 150w graphics card you can get away with reusing the HP power supply as well if you mount it with gorilla mounting tape and use a dual SATA to PCI-E 8 pin adapter.

[@scottellis5911]

@@DLMtechgarage i manged to use my back plate from my old hp board with i7 2600 and it worked

[@lumizt]

May I ask how the ziptie method works?

[@StephaanBOSS56]

I just cut out the square that hold the four holes out of the case with a tiny angle grinder.

[@nolanwilson568]

Can you do an HP Elitedesk 800 G3 RGB swap? I have those and wanted to see how I should run my led/power switch :)

[@markwatkins9951]

Great video but the g2 board has 12 pins not 10 any suggestions on pin out because still get fan to spin a second then stop.

[@DLMtechgarage]

yea I said that wrong, I have seen that when using the wrong psu adaptor. it has to be specific to the 800 g1

[@Li2NaX]

what connector did you use for usb port? I was kinda confuse with shorting..Normally a new case comes with 9 pin usb 2 or 3 from the case usb ports. How will you use it for that motherboard? please explain further to me..thanks

[@DLMtechgarage]

I use the stock usb port, add the extra pin and splice into the original connector. I have a video on the z240 which shows it alot better. link below kzbin.info/www/bejne/aaKynpuha8yJn80

[@eueu7046]

Pls help me I have a hp prodesk 600 g2 mainboard but i dont know where the jumpers should go it's different than in the video (the pins are not in the same place as in the video)

[@DLMtechgarage]

not sure as I never messed with the 600

[@donkeykong1234]

so why wouldn't i just plug something into those usb headers instead of jumpering ? it still throws the error?

[@WockHxrdtt]

im worried about jumping pins cause ive seen some other case swap vids and they dont need to bypass the error idk?

[@DLMtechgarage]

without the jumping I had the errors.

[@jackoweee]

Hey man, first of all nice video! I have the exact same model and i just bought a 24pin to 6 pin power supply adapter, a 500 watt power supply, a gtx 1060, and of course a bigger case. I have a question tho, what is the exact size of the bolts you bought?

[@DLMtechgarage]

it's been so long I don't remember, i thought I mentioned it in the video. my apologies.

[@quad_4981]

Is there a spot on the motherboard for a reset switch cable?

[@Tecalitlan1943]

Question, I have that same HP 800G1, I am going to install a Geforce GTX1650, I know the power comes from the PCI-E rail thru this 240 watt power supply. Nividia recommends at least 300 watt power supply. Will the GPU still work and will it work properly? If I upgrade the PSU, the watt at the rail would not increase anyway right?

[@DLMtechgarage]

the system would crash and could burn up the card, mobo, or psu, need more juice out of the psu

[@mrjoecharles]

so if i put this in a gaming case, can i just plug in the new cases usb 2.0 into that yellow header? and the usb 3.0 into the blue one and have them be usable on the new case? or do I HAVE to jumper them together? id like to just plug the new cases wires into this board, but i dont want it to fry anything, as can be the case with dell motherboards and their fan headers for example

[@DLMtechgarage]

you don't have to do the ground mod, that only gets rid of the error, it will still work

[@rosevillereaper9230]

One question my case has two usb's (the old kind) its a case from 2001 where do i plug those in at? they say vcc1 usb1- usb+ vcc2 usb2- usb+ and then 2 ground cables

[@DLMtechgarage]

it's hard to say with the older cases... I am not sure.

[@hamradioHam]

power adapter link on amazon not avable any other links to one ?

[@stoltzy]

Great video. I'm looking to do something similar with an. HP Elitedesk 800 G4, which has a a mother board that looks a lot different. Mainly that it appears to only have a 4 pin power connector. I'm able to find one that will work for that. Thoughts?

[@DLMtechgarage]

not sure, might require more modding then its worth.

[@clone8780]

a have some one like this mb is name Hp Elitedesk 705 G3 am4 soc / but i have stop boot and ask message post error :90e power supply fan not detected. and press enter to skip msg. i was found all jumper for disable msg for usb but the power supply fan does not release the boot.

[@SwampFox178]

Could you tell me how to connect the exhaust fan that comes with the NZXT H510 to this board?

[@DLMtechgarage]

I would use a sata to 4 pin adptor

[@DiabloRealm]

I'm looking to upgrade my fans only in a stock HP 800 G1 tower, I read somewhere the pin config on the Case Fan connectors is proprietary and you can't just plugin any fan to the headers. Do you know if that's true or? I don't want to start a fire xD I know it has at least 1 SYS Fan header and 1 CPU Fan header.

[@DLMtechgarage]

It's easier to go with a sata to 4 pin as the fan connectors are limited.

[@unrandommas6304]

hi, two question, i have the hp elitedesk 800g1 with an i5 4590 and a 240w power supply, 1 question: I can add a gt1030 without problems with the power supply? 2 question: In case the answer to question 1 is yes, in the future I could put an i7 4770 on it or the power supply could not power the computer.

[@DLMtechgarage]

Those two upgraded would be fine. The gt 1030 uses very little power and leaves enough for the i7.

[@es1alexlopez]

Quick question, what is that white connector for? My pc case doesn’t have that connection for the white connector. But I do have that black cable next to it. What am I missing here ?

[@DLMtechgarage]

not sure what connector you are talking about??

[@albertalmodal4331]

This is SFF variant right? Does the same process work on a G1 800 Tower?

[@abdullahadnan9424]

Bro..I have HP 705 G1 with AMD A10pro 7800B...and it really bottlenecks with my graphics card...what processor should I replace it with?

[@mistergogo5399]

What form factor does the case have? I heard that ATX cases are not compatible with HP motherboards

[@DLMtechgarage]

this case is a regular atx and the boards fit fine in them. you can also use the matx.

[@michaellowe2305]

I missed something, why are you taking the cpu heat sink off to begin with? Or was this just a mother board no cpu?

[@DLMtechgarage]

it is bolted to the case. only way to remove the board.

[@RobBroderick44]

I have a EliteDesk 800 g1 TWR and I noticed the mobo screw holes don't match those of a standard m-ATX mobo. Do you need to adapt the case to the Hp OEM mobo ? How bad is it ? Thanks.

[@DLMtechgarage]

no sure, never used those.

[@giovannifarias3501]

Can you do a video of how you hook up the fans would highly appreciate it I can’t seem to wire my fans correctly

[@DLMtechgarage]

I just used a sata to pwm adapter that splits it into 4

[@oterotube13]

Please, can you provider a blackplate adapter for the cpu cooling. ? This is your missing part in your video (Amazon link) . I got just the motherboard i got a square figure cooler that doesn’t catch this hole. Truly thankful😅

[@DLMtechgarage]

their is no adaptor, you have to use the original cooler and buy the nuts to make it work.

[@ellobomio66]

I have an HP EliteDesk 800 g3 and would like to know if the 24-pin to 6-pin ATX Power Adapter Cable works on my motherboard

[@DLMtechgarage]

not sure about the g3

[@TheCuyinola]

hi, awesome video, btw do u think that motherboard would fit in to a micro-ATX case?

[@DLMtechgarage]

it does

[@issameddaraoui4849]

i know i'm too late 😅 but does that adapter work for 800 g2 (i7 6th)

[@clone8780]

may be are is unlock bios for disable boot ask msg for post not coneted any pin fun or usb

[@BICHOsosFps]

Nice to meet you!!! I love your video. One question I have an hp prodesk 600 g1 sff, which 24-pin to 6-pin adapter. Do you recommend I have a 550-watt power supply. please help!!

[@DLMtechgarage]

www.amazon.com/COMeap-Power-Adapter-Workstation-12-inch/dp/B06XW7RWNH/ref=sr_1_3?crid=3M463SLXJJOPL&keywords=hp+prodesk+600+g1+24+pin&qid=1694030298&sprefix=hp+prodesk+600+g1+24+pin%2Caps%2C87&sr=8-3

[@kingjamir2135]

Hey can you help me? I have a hp Z230 SFF. I bought a 500W psu and im moving the MOBO into a h510 elite case. My psu is a Thermaltake smart series. Comes with main pwr connector 20+4 pin, 4+4 atx pin that i plugged into the cpu pwr, sata 4 pin i used for two SSD, pci-e 6+2 pin (x2) one 8pin went into my Rx 580, peripheral 4 pin and a fdd 4 pin. I planned on putting one 6 pcie pin into the main power connector. The pcie pin fits into the main power connector. But the shapes look a little different. Also the 6 pin thats above the sata power. I don’t know if it matters if i use that or not. So do i even need the 24pin adapter?

[@DLMtechgarage]

you have to use the adaptor or it won't work, you can short out the board. When you buy the adaptor make sure it is specific to the z230 as other models look the same but are wired differently.

[@hightechzone3047]

Hi, i was swape case form g705 to bigger case . I have problem with speed fan on CPU. When i turn on PC after about 10 seconds cooler on cpu start working on full power.

[@DLMtechgarage]

maybe temps, bad mount or thermal paste. never had that issue.

[@fredneedle123]

Where can I get the SM Bus Controller driver? All links from HP and various forums lead nowhere.

[@Shisui2001]

Your great man, my system unit is HP ELITEDESK 800G1 SFF(AMD A87600) 12GB RAM, 120GB SSD MY SYSTEM UNIT GOOD FOR BROWSING AND SEMI GAMES, IWANT TO RECASE IN ATX CASE, THANKS FOR YOUR VIDEO BRO YOUR GREAT

[@mrfxhd8873]

Were you able to shift the things to the case somehow? Successfully? Because I acc went to my local pc repair shop and they said it's a brand pc so the case cannot be swapped 😅😅

[@Deakin1]

will i be able to use usb 3.0? one of the reasons im switching is so i can fit a full size card in for vr, i need a 3.0 for fast response time

[@DLMtechgarage]

yes, with doing the pin out for the usb it will work fine.

[@dale_26]

Thank you for this video! Everything is working great however I do get error 512, rear chassis fan not detected. Which is odd because there is no rear chassis fan? Does anyone have any insight regarding error 512 on boot? Rear chassis fan not connected? I've spent hours searching and can't seem to find a solution.

[@DLMtechgarage]

i plugged in a fan and it got rid of it.

[@dale_26]

Yes lol I felt bad for posting this comment because last night I realized, maaaan just plug a fan in !! Thanks for taking the time, I appreciate it!!

[@kparserpcs6699]

wish I had used pc deals like that where I live

[@DLMtechgarage]

It's hurt or miss, key is to stay vigilant checking the market place!! They get snagged up quick!

[@jonathanpinlac2030]

Hi thanks for this video, my only question is can I purchase any 3rd party ATX or Micro ATX case to transfer the contents of the HP 800 G1 SFF or are there specific brands only that can fit? Please let me know. Thanks again.

[@DLMtechgarage]

you can use any case

[@jonathanpinlac2030]

@@DLMtechgarage thank you! This video will help in my transfer. Appreciate it!

[@ragakesa]

Hi boss where to connect the front power panel the reset connection? Do you have any clue. Thanks

[@DLMtechgarage]

i don't, not sure they had that option as every diagram I found did not have one listed.

[@RB-qg1gs]

I have a HP elitedesk 800 g1 i7 4th gen like in video and I want to do case swap as well but I’m a bit weary of the usb 3 and usb 1 error jump cables. If I have a case that can fit into usb 3 and 1 pins would I receive the error still? Or is this solution purely for if you are not using the pins?

[@DLMtechgarage]

All cases will fit the USB. This issue is that HP used a ground signal in one of the pins on their connectors to show that error when other front panels are used. By doing the pinout it gets rid of the error. It is only necessary if you do t want that error

[@RB-qg1gs]

@@DLMtechgarage Cheers thats helped me decide what I want to do with my pc. Thanks for the response!

[@lom2969]

Hewlett-Packard HP ProDesk 600 G1 TWR which wire to buy I can’t understand 3 or 4 wires need sorry google translate

[@DLMtechgarage]

not understanding??

[@ismailedt]

pls help i have i5 6th with motherboard doesnt have 24pin port and i want to upgrade my psu and case

[@DLMtechgarage]

they sell and adaptor for it, you need to make sure its the one for the 800 g1, amazon sellss them

[@justinbeard2024]

is there a way to get a better power supply without swapping the case or doing something external?

[@DLMtechgarage]

not on the sff versions, the matx you can.

[@FaltuAccount6969]

Sir what old psu (attached with old hp sff cabinet) fit in new big cabinet plz reply sir

[@DLMtechgarage]

any standard psu will work.

[@DrInternet]

this came out on my bday :D

[@lilMungo]

March 9th

[@TorchFN]

happy birthday

[@hiderproff5472]

when i change the psu with the 6pins converter it always shown 515 power supply fans not detected

[@DLMtechgarage]

make sure you got the right converter, the error happens when you get the wrong one. it has to be specific for the 800g1... there are convertors for the different models and the pin outs are different.

[@opakgaming2903]

I wanted to ask i have hp elitedesk 800g2 cpu so which motherboard will be there Atx ,mini atx or micro atx actually i wanted to upgrade my pc by adding gpu ao can u recommend me any low power gpu mg pc is of 200watt smps

[@DLMtechgarage]

the gtx 1650 or rx6400 or good options, require no supplemental power and are low powered gpu's

[@weric69]

can this tutorial be used for a prodesk 600 g2 ? everything seems to be looking about the same

[@DLMtechgarage]

if the mobo is the same then yes.

[@half_r_mk5]

@DLM tech garage, I have a question though, the CPU fan, is there any 3rd party fan recommendation or maybe you have found that fits this motherboard?? I'm looking to do an AIO cooling system for this one, but haven't found anything that fits, let alone the CPU fan. Any ideas? I'm looking at the CORSAIR H55, will this somehow fit? I also checked some Noctua brands for the LGA 115x but not sure if their brackets fit this motherboard... Reason I asked is that during heavy intensive CPU tests, the temps hit up to 80c and i'm concerned that the fan isn't able to keep up...I tried CPU burn and the factory CPU fan couldn't keep up

[@DLMtechgarage]

I never look into an a different cooling due to the mounting on this hp not being standard. i never had an issue with the temps as far as gaming and editing. Stress test run the cpu more intensely compared to typical usage.

[@half_r_mk5]

@@DLMtechgarage okay thanks, no problem, I guess I'll be the first to try this out to see if I can find an AIO that fits this motherboard. I just purchased the ID-COOLING Frostflow x 240. It comes with different mounting points for LGA115X to 1700. So will see if this one will fit. If not then I'll return it. Thanks. 🙏

[@DLMtechgarage]

Keep me posted!!@@half_r_mk5

[@half_r_mk5]

@@DLMtechgarage, after further research, I ratracted from this idea. After watching long term reliability of the AIO and the way how corrosion occurs and leaks etc., I said forget it. I watched this video review and tests from Gamers Nexus regarding proper mounting of AIO's and materials used from it: kzbin.info/www/bejne/eJOqoKCsZp5oqc0 and based on my conclusion, it's not worth it. I'd rather keep my PC dry and not have any leaks or corrosion etc. I'm trying now to cancel the order of the AIO. hoping it gets cancelled. while it may look nice and cool to have the AIO's, on the motherboard, my concern there is leaks going to an expensive GPU (RTX 4070 TI) or the motherboard itself, or after 3-4 years of pump failure or mechanical failure, is just not very reliable. Compare that to a decent CPU fan, as per what you said on the video, the OEM's are good enough, i mean they last 10+ years. Sure it may end up dusty but can sure be blown air and be put back into circulation.

[@he3ro]

How do you fix the rear chassis fan error? I have new fan but they are power but Sata.

[@DLMtechgarage]

that fan I do plug in.

[@ayman67813]

Bro help please can I replace the case of my HP 6300 microtower to a new one with the same compenents ??

[@DLMtechgarage]

unfortunately the way the hp6300 mobo layout is, it is not transferable to a typical case. since the 6300 is the q75 chipset, best bet would be is to take the cpu memory, and other components and transfer them to a newer motherboard so you can use a better case and psu.

[@Ashishcsify]

so nice of your really best video provide lot of Info Thanks

[@DLMtechgarage]

Thanks and welcome

[@blade8424]

Can I do this with a HP Z2 G4? Hope someone makes a tutorial for it.

[@DLMtechgarage]

not sure, need to try one day

[@McgurganatorZX]

Hey this is a rad video and I'm actually in the process of doing this myself! One question: Do you have a link to the 3D printer backplate? I did not see it in the Description

[@DLMtechgarage]

forgot to post it. link below, its not perfect but should get you in the right direction. www.thingiverse.com/thing:3912752?fbclid=IwAR3_8hiD_LTt0ZaL2-I_ZzwKaN5PmObTL7nDYOv0ysfjh3DbRow101alnKs

[@McgurganatorZX]

@@DLMtechgarage awesome, thanks a bunch

[@bryanmuir362]

The PC case I transferred the motherboard to has wires for a reset button. Where would I put these assuming they connect near the power switch?

[@DLMtechgarage]

not sure as I did not figure the reset button and everything i found, i was unable to find info on it.

[@bryanmuir362]

@@DLMtechgarage That's fine, thanks for the quick response though

[@RB-qg1gs]

Do you need to jump them before putting front connectors in or is it fine if there is something in them

[@DLMtechgarage]

not sure of the question you are asking.

[@RB-qg1gs]

@@DLMtechgarage Sorry I wrote that when I was tired lol. So you see how you used the jumping cables to get rid of usb f1 error, is this necessary to do if the pins are being used? And if so, do I do it before I transfer it into a new case?

[@paulillas]

How were you able to put more than one case fan? I'm planning to put 4 case fans in total (the case fan that comes with hp and 3 aftermarket case fans). would it be possible? do i need a adapter or something? nice vid btw!

[@DLMtechgarage]

I bought a kit that used SATA power to power them via a hub, I use the gim fans which work great and look good. will post a link to the video i did on them. kzbin.info/www/bejne/Zqe6oquenNispa8

[@DLMtechgarage]

@Kame just a sata to 4 pin fan splitter

[@alonecat4409]

Can i use hp elitebook 800g1 processor to my H110M-D motherboard?

[@DLMtechgarage]

the elitebook are laptops and those cpu's are soldered to the bored.

[@crotoviper8293]

HELP i got a new power supply and i connected everything and yhe green light on the MB just keeps blinking everynow and then and its not a long blink it looks like it cuts out i worked so hard on this :(

[@crotoviper8293]

Did i get the wrong MB power cable?

[@DLMtechgarage]

it could be the cable, the cable is specific to the model www.amazon.com/COMeap-Power-Adapter-Workstation-12-inch/dp/B06XW7RWNH/ref=sr_1_9?crid=2S79BCOI74SKF&keywords=hp+elitedesk+800+g1+power+supply&qid=1698759633&sprefix=hp+800+g1+power+sup%2Caps%2C90&sr=8-9

[@popolkupol6948]

planning to case swap and upgrading my old hp 8300 cmt. can u give me the tips for that? or I just follow this video? because it have same 6 pins power supply connector

[@DLMtechgarage]

should be the same as this video, key thing to remember is to make sure the adaptor is specific to the 8300, hp uses the 6 pin but with various different pin outs depending on the board. if you get the wrong one it won't post. make sure the one you buy has support for the 8300. I am not too familiar with the 8300.

[@popolkupol6948]

@@DLMtechgarage ahh I see thanks anyway

[@jovenvincentbravo6576]

Do you think my hp prodesk 600 g4 would fit with inplay wind 01 case? And do I need to buy another psu or can I use the psu that comes with my sff? Thank you very much!

[@DLMtechgarage]

looking at the board it may be a challenge. the baord may fit but you will loose the fron i/o and then you need to figure out the power pinout. as far as using that psu you may run into issues with cables not being long enough and possible having to rig up a way to mount the psu. I think it may be more trouble then it is worth in my opinion but def something cool to try and document.

[@jovenvincentbravo6576]

@@DLMtechgarage Wow, I'm having the same thoughts. Thanks for the insight.