HPI Savage Clutch Problems Q&A

Clutch problems
Please check out my Wish list and anything you may send me will leave me eternally grateful ;)
Rusty's Amazon Wish List: amzn.eu/3TJm7Rf
You can help me make better content by donating Via PayPal as a gift to [e-mail]!
Or you can use this link: paypal.me/RustySkull
Every penny that is donated will go into making good quality videos for all my loyal subscribers!
Many thanks to you all :)
#NitroRC #Savage #Engine

[@rcyalater...2305]

I thought this was my problem... Thanks for confirming 👍

[@Ratchet_effect]

You can change the strength of the clutch springs to make the clutch engage sooner or later. I'd like to hear your thoughts on Teflon vs Aluminium clutch shoes. I see Ben! True! you're not a fire starter, your problem solver a liquid nitro problem solver 😁👍🏻

[@cossie118bmk]

igeldy pigldy lol love it ................cool video dude 👍👍👍

[@plewsford]

I had the same issue with my MP9. One of the shoe springs failed, so one of the shoes would always being against the bell on tickover. Used some 0.95mm springs which are a bit stronger and all ok.

[@chefdshomecooking]

Can you tell me why my savage 5.9 want free roll forward when not running? HELP Me

[@Danholland20]

Hi, great videos eventually helped me get my savage 21 running after 10 years + .... Would you recommend a reverse gear upgrade?

[@HaggardRC]

Yeah why not just treat it nicely

[@tonycruz7596]

So I have a problem my 28 Dynamite Big Red has a fine idol took over is fine but when I sat on the ground it wants to bog down and not go at all I checked my clutch that seems to be fine I checked the brake linkage and it's not tight what else could bog down my motor? I need help!

[@leeboost3120]

Hi mate I have a Savage 2.5 with a Force 3.2 engine when I start it up it just goes mad & wants too shoot off

[@BenshobbyStuff]

hi mate i have the same problem where the clutch is fully engaged. now i cant get the bloody bell off. you got any ideas how to get the bell off?? thanks Ben

[@HaggardRC]

Pliers lol.

[@BenshobbyStuff]

@@HaggardRC i tried everything mate, i ended up using a pencil blowtorch to heat the bell super hot and vice grips to yank it off, it took 3 attempts but got it off in the end. it was the inside bearing that had gone

[@pcgamerracing5539]

Kyosho mad force when starting the engine and throttle, the engine sounds strained and wants to die, then I release the throttle and accelerate again and when it slams, the car moves forward. I have checked the clutch but find nothing that is wrong.

[@adamkeene6371]

I reckon the problem that viewer is having is its running a too high idle.

[@HaggardRC]

He’s fixed it it was a broken clutch spring I believe

[@VintageCR]

just to recap, if this viewer force stops the car on the ground (because it kept going on idle) the engine would then stall, meaning his idle was perhaps a bit on the lower side. if the idle was high, and he tryed to force stop the car from moving forward, the engine would keep running. i've had the same problem myself a few times and in both cases a clutch spring or multiple springs where simply broken, so any RPM the engine would run at meant that the clutch shoes would fling out and engage inside the clutch bell. I tryed lowering the idle to the point where i couldn't keep it running at all so.. that said, do you still think its due to the idle.. lol