How to lift a 2006-2014 Honda Ridgeline 3 inches with the HRG Offroad lift kit!!

[@johnvela9727]

Omg... I want a 3 inch lift kit for my ridgeline.... finally someone makes a perfect kit

[@privedriverhouston5246]

JOHN VELA ever thought of a Honda RidgeLine Texas Edition with a 3 - 4inch lift kit + A Dully Back Wheel Base?

[@WhoppPpperrr]

Where can i find lift kit for mines

[@ilikeutube2011]

I install a 2.5 lift kit with the subframe spacer kit and it works. Thank you guys at hrgengineering great product and great customer service.

[@ilikeutube2011]

2006 ridgeline

[@miketee3007]

What a awesome, humble, smart guy with THE PERFECT lift for THA RIDGE 👌 You the man brother Thank you for such a detailed video!!!!!!!!!!!

[@DeathWireGaming]

Literally was borrowing my Gramps Ridgeline while my car is in the shop and just looked this up. Super badass man

[@deanknight7133]

Bought mine last week installing this weekend. Thanks Ben for the install video. The kit is amazing quality and glad to support and american company. We need more stuff for the ridgeline

[@charlescherris6548]

Austin, how did it go? Are you happy with it?

[@thelastcyclicfiend8]

Omg this lift is amazing finally some ones is making video of Ridgeline and making aftermarket things for it I personally think that this truck is no noticed or like nobody pays attention beacuse everyone say oh it's a Honda it's suck or it looks ugly beacuse of how it looks but not it's a good looking truck and can be really cool looking lifted with some mud tires or off road tires I have been thinking of making my Ridgeline into a Baja truck like making it fast lifted making a skid plate a metal bumber and stuff this truck is amazing and I'm gonna let you in a secret of the Ridgeline I daily it and don't you think like it's bad on gass like it uses lots of gass I found out a solution how to make it save gass like it's simple anyone can do it so what I did was change the filter sure it saved gass a little bit more with a new air filter on the engine but to really get best gas mileage is to take off ur cateletic converter or cat and it's the rear one it's under the driver and passenger side you might know what I'm talking about so take it off then take everything off inside the cat so it's hallow this will increase horse power and gas mileage I put it back on after I took off everything inside the cat keep in mind I still have my stock exausht and once I put everything back together I start it up it was the same it didn't sound loud or anything same sound nice a quiet after that I reved the engine I went to the tip of the exausht and it felt more air like coming out like lot it didn't feel like it was clogged or anything it felt like it was blowing the fumes or co2 or what ever out nice and there was dirt on the floor when I reved the engine it had so much like air coming out of the exausht it blew it like nothing after that I used it about a week and my gass would usually won't last like a whole week after I did the mod I would put gas in Monday by Saturday I would be at empty after I did the cat thing I was getting so good gass milage thaty gas would last up for 2 week like it was crazy my gas last more know it last more than my Honda ep3 and it a 4 banger and it also increase horse power I can feel the truck when I barely push the gas like it will go fast I want some one to try this and tell me the amazing results it really work it fast and easy and will save you gass and money

[@privedriverhouston5246]

The Last Cyclicfiend8 ever thought of a Honda RidgeLine Texas Edition with a 3 - 4inch lift kit + A Dully Back Wheel Base?

[@mobilewoodworking8804]

Did this make an engine light come on? Also did it pass The admission test on the inspection! Sound like a great idea but I want to make sure

[@Nippledozer]

Light bar brackets and skidplates sound good! This 3 inch lift kit is awesome!

[@DARODOLO]

Glad I found this vid. Had a 2" spacer kit on my 06 for years and took it off, because I got tired if the awful vibration under acceleration and it was prematurely destroying axles. Now seeing this gives me hope and I want to lift it back up. I'd love to see a long travel kit made for the Ridgeline. Also, with that 3" kit, now it will accommodate a 32" or 33".

[@eggonatowel868]

Any idea what caused the vibration? I get that occasionally with my 2" lift

[@DARODOLO]

@@eggonatowel868 The increased CV joint angle, but you only feel it under load.

[@goodplanetfilms]

@@DARODOLO do you think this lift kit would solve the vibration problem?

[@DARODOLO]

@@goodplanetfilms I actually called the company and spoke to them about that issue. They said they believe it's actually a axle issue, but that subframe kit aligns the axles again which would alleviate vibration. On a side note, if you replace your struts, DO NOT USE aftermarket springs, keep the original springs.

[@goodplanetfilms]

@@DARODOLO thanks for the note! Yes a lot folks with 2" lift kits had problems with axles being worn out prematurely. I just wonder if this would fix that issue.

[@hypotrucksjourney3214]

I’ll be doing this to my 08 Ridgeline once it’s out of the shop. They look great with those extra few inches in height. I’ve done some work on mine and this is my next step on my build

[@ridgeline_mike9254]

Awesome video! You guys already know what Ridgeline upgrades I’m waiting to see😂🙌🏼🍻

[@ljay3030]

The ridgeline is a truck and I’m happy there is a lift available. And yea I said truck , my ridgeline has almost 400,000 k and everything still works …. I’m going to lift it !!

[@unkoistheking]

I have the sub frame drop kit on my rd1 and it fixed all my wobble issues! Sadly im getting a ridgeline in a trade so gonna get rid of the crv on 30s and obviously get this kit for the ridgeline. Great video brother way easier than the rd1 haha

[@dilligaf7321]

Great video outstanding information got a 2012 Honda Ridgeline Overland and I've been working on that lift it would look awesome

[@PubeCombo]

3:54 - I know this is super late but you mentioned clearance under the hood at this point in the video for tools... At 3:54, that rectangular hole on the top of the video is for your hood prop, raises it WAY higher and out of the way... I learned this after doing my front struts last year. Hope that helps somebody else in the future.

[@Avillgoods]

Love to see some underside skid plate, rock sliders, tube bumpers. I’d love to see some custom struts. Too bad no big name companies like Bilstein or Rancho don’t make struts for the Ridgeline. I loved the video. Probably going to be buying your kits sometime in the near future

[@hrg_tv]

Stay tuned! We like where your heads at.

[@dustbunny10111]

You should make fender flares for the Ridgeline

[@argowal]

This is super easy, barely an inconvenience 😆

[@masonprice808]

If you guys could go down the rabbit hole of sourcing extended travel CV axels that would be amazing!! Or any skid plates

[@johnlabine4171]

I love this option. I was looking underneath and knowing it's a unibody I hesitate doing anything but I was watch Baja racing videos and saw that the longer A Arms, axles, trailers,and Struts could have a longer suspension and larger tires but I doubt the unibody would hold up to the extended abilities that would have to be tried😅😂

[@daneleplatt1605]

If you could make fender flares that would be awesome!

[@Quicklex01]

I have a 2012 Honda Ridgeline that's got a 4 inch lift and also put set of XD rims with 265/65R18 Handkook Dynapro AT/M's. Rims and tires fill fender wells perfect (no scrubbing). Moog lower control arms, KYB inner and outer tie-rods. About to change struts from KYB to something beefer.

[@denver.bites.fishing7762]

The 3 inch kit is on my lists you rock!!!

[@t89maniac]

Hey love the 3" lift kit I wish I saw this lift kit before I installed my 2" lift. That might be a future mod I'd be looking into. Would you be making a high clearance rock slider kit? Something like Jake Allen's friend, from Facebook, has built him? Also a high clearance bumper kit like the SSO slimline hybrid stage 2 kits they have for tacomas. If that's even a possiblility with these frames. Something to improve the approach and departure with a light armor.

[@jameslizardo1588]

You ever have any issues with your ridgeline locking you out when its running? Loved this video!!!!

[@johnbayliss1098]

Don't stop my brother excellent continue thank you

[@coleomo]

Into the products you making. Not ready for a lift kit yet, but light bar brackets and more has my interest!

[@curtiswright09]

Great video ! Saving me alot of time on tomorrow's install 🤙

[@desertdan100]

Front and rear metal bumpers with a winch mount or space tucked up into the bumper. Something that won't kill the approach angle and has tow hooks or D ring shackle mounts on the face of the bumper.

[@ryanmenke9554]

Thank you for the video. I actually make my own kit out of aluminum and poluurethane for a little give. It was really easy and way less than 150 bucks. The fox guys are my neighbors been jawing at them for some trick struts. Was toying with replacing springs with air bags but not sold yet. Oh and I have gone four inches just to be different. I am a platnum tech for forty years and a race car motocross nut so I really understand suspension. I have some ideas. Already ported polished heads flowed every thing working on electric turbo supercharger and remap.

[@kanibis420]

I'd pay for a set .

[@Heaskedwhatistruth]

I’d love to see a full replacement front trail bumper like from ARB and etc. I think with a 3” lift now these rides are more serious contenders. Before knowing there was a 3” lift I’ve never even considered buying a ridgeline.

[@kathleen7997]

I want this so bad.. Just bought my 06 Ridgeline RT and although I like it its kinda boring looking as it's all stock. With this kit, some new rims and tires I will love it...

[@ubFortnite]

Thanks for the video, buying one .

[@henrygaynor]

Enjoyed the video - what are the make/model and specs for the rims and tires on this ridgeline.

[@lousantiago7511]

Great vid. Thanks. I'll be handing off my '13 RTL to my son soon enough, and am looking to tweak it a little so he's not driving his dad's car. I'd be interested in any of those modifications you spoke of. Thanks again.

[@gman15ida41]

So, just curious on if your axle shafts held up with the lift or not

[@williamturner420]

Gald I found you!!! 2007 stock

[@markfoster5026]

Will y'all be doing another lift kit giveaway?

[@deanknight7133]

We need a good roof rack we can add a cargo carrier to with lights

[@rzzillar90b54]

Great video! 👍 Do you guys have anything like that for the 2006 Pilot ?

[@midas7934]

A stainless steel lift kit would be nice. I got a Truxx lift kit on mine, the flanges are rusting like a flaky pastry.

[@MarkDonat]

sorry I got confused at the beginning of the video. So I only care about ground clearance, but I don’t care about how things look. And preferably a little bit bigger tires. is the subframe lift what I want? being closer to factory geometry is important to me. I want it to be reliable.

[@chillbro8811]

Bed rack with side Molly mounts would be awesome

[@Rpch26]

Thsnks for this video. I have a Ridgline 2014 standard, and i would like to lift it but only a litle to have little more agresive shape...but i dont want a monstertruck or a full offroad beast. Only a eastethic literalmente higer. You can recommend some lifting kit as that? Thanks again for you grear videos.

[@CampingRandy]

Awesome! Excited.

[@jmboal]

A Twin Turbocharged motor like the HR35TT. Supercharger complete Installation. Any Engine Performance Installation Video’s

[@jessepark831]

Really hoping for a 2nd Gen Honda Pilot. I think the Ridgeline and Pilot would be pretty similar.

[@hrg_tv]

We just need to get our hands on them to R&D some kits.

[@AzianAssassin]

I think you'll have a good customer base for 3rd gen CR-V skid plates and bull bars!

[@theartofhospitalityworldwi893]

Looking for a 2007 - 2014 Honda RidgeLine Texas Edition with 3-4 Inch Lift Kit of Course + A Dully Back Set of Wheels. Can it be done? Texas Size Edition!!!

[@aaronrepper7649]

Hi awesome video, i have a 2017 Honda Ridgeline and want to lift it .do you make a kit for it?

[@MUHLMEDIA]

Is the install similar to a Gen 2 Honda Pilot minus the rear shock? I ordered the 3" Ultimate lift. I rather save $$$ and DIY and add new power tools to my tool box.

[@edwinwilliam5658]

I really appreciate this video.

[@ivanperez4340]

Is the subframe kit needed if I only do the 2 in leveling kit for from and rear??

[@MarkDonat]

sorry, one more question how is this different from the 2 inch lift kits on Amazon? I’m assuming the Amazon ones are much farther from the factory geometry? Do those still increase ground clearance?

[@aznazguy]

When you flip the rear strut assemblies around so they are backwards, instead of swapping them left and right, the plastic feature at the bottom of the perch area ends up facing the wrong way (end of the coil). Inboard is outboard and vice versa. That's why there's a left and a right for the rear. It's probably better to swap left and right so that inboard stays inboard and outboard stays outboard. Also why not have studs on the top of the front spacers? Regarding other products, how about a steering wheel spacer, to bring it further back?

[@TookerStillRides]

Just ordered the lift for my old 2012 Ridgeline.

[@La0x91]

I’d like to see lift kits for 2nd gen Pilots!

[@luismontellano1256]

Does this modification (in addition to the size of the tires) also affect gasoline consumption?

[@beanburnham01]

HRG Skid plates, bull bars, sliders or a gen 1 would be awesome

[@MichaelBaptista-zp6jx]

This 3” lift on a 2010 Ridgeline…. Do you guys have wheel/tire recommendations?

[@chillbro8811]

Any plans for rear windows molle for ridgeline? Or would the Elements version work?

[@HadenatorTrainz]

That is some good editing.

[@sheldiajackson1837]

Dang it against the one on risen truck stop they’re ready for for one

[@JeremyMason-t9j]

I put a 2" front and rear lift on a 2012 Honda Ridegeline, and had the vehicle aligned. The vehicle immediately developed a shudder that starts at around 17mph and ends at about 20mph (the shudder seems to be happening only in the front of the car). The mechanic who did the work told me that he is concerned that the front axels might be stressed and that driving the car might cause damage to the axles and other expensive parts of the vehicle. Do you have any idea on what I might to do solve this problem?

[@joemontalvo50]

Enjoy your video thank you im from NYC. I have 09 honda crv ex awd been trying to look for lift making little clearance off the floor any suggestions I wanted to put little bigger tires make like off road look can you help me what should I get how hi can I go on on the lift please thank u been for 2 years now

[@rahulrane1658]

Hi there, are you facing any rub in the front on full turn of the tires? Also is there a need to change the length of connecting shafts for accommodating the changed angles? Thanks in advance!

[@frank2096]

I would love to know how to lock the VTM and use it at high speed.

[@VisperaMusica]

I have been looking for kickass roll bars for a 2013 ridgeline but theres NONE!! roll bars would be awesome.

[@unknowmysteries5925]

I’m late to the conversation. My question is: how does the lift and larger tire and wheels affect the vehicles performance ? Or did you add performance to the vehicle.

[@danserrano2251]

Yeah I wanna know too

[@Puertorock01]

i am thinking about installing 3 inch lift on my 2012 Ridgeline. Would you guys be able to do the install ? Where are you located ?

[@mobilewoodworking8804]

Love the video I would like to please have the link to order this please

[@juanvalles8187]

Front bumper delete?? Light bar brackets…

[@cristianparedes2575]

great video, it helped me a lot.

[@johng8355]

You should make a clip about the rear door checker mod. I've done it and it was easy

[@mikesfabulousmovies]

I have the 2 and half lift and the subframe but i still get a shake... Wheels are balanced and alignment done to spec... I need help with this...

[@Sergio.493]

Do a video of a 2003 honda pilot im waiting for my hrg oder and dont know much..

[@theoverwatch23-10]

What if you don't do the subframe kit with any negatives?

[@hrg_tv]

You absolutely cannot install a 3 inch kit without the subframe kit. all our 3 inch kits or any kit that comes with a subframe kit you have to install the subframe kit FIRST. you will not be able to install the lift components without doing the subframe kit first. If you did install the lift components without the subframe kit. the suspension geometry and CV axle angles would be un driveable.

[@theoverwatch23-10]

Thank you for replying. I was waiting on your reply before I get one ordered thank you for the awesome as well.

[@wm2877]

What’s the biggest tire you could run with the 3” lift?

[@jason4522]

Hey. I just subscribed!! So glad I found you. I just changed my alternator and it has activated my theft security. I drove it from the garage to home. I drove to work and my key wouldn’t release or it wouldn’t go in gear. What can I do please??

[@tylerthompson9225]

Call the garage you had it done at and tell them they fouled up. They may or may not have the capability to deactivate it. A dealer most definitely would have the capability.

[@AASCsutak]

Hi, I have a 2014 Ridgeline and I bought from you the 3 inch kit, what is an appropriate time of hours that a mechanic should charge you for to put in the 3 inch kit. A regular mechanic just don't have the appropriate estimate to give me. Would you tell me how many hours would it take? Also the offset camber bolt comes with this kit?

[@isaacobideyi1537]

I want this lift kit for my ridgeline but you done ship to Nigeria so what do I do to get this kit

[@kurtalsiayo9567]

Does the spacer came with the lift kit? Thanks

[@quanahweedon9532]

Would this be similar for the pilot?

[@Brrrap743]

Is a suspension lift kit for a 2008 pilot compatibles with a 2010? Did they make any suspension changes from 2008 to 2009? Thanks for a reply.

[@buckeyebruno]

Always wanted a larger fuel tank for those longer drives.

[@raysoeng7893]

Do you have to do the sub frame drop?

[@Flamingbear29]

Hey is the installation process the same for the 2017 Ridgeline?

[@puertoricanstoleapc8361]

I have a 2006 honda ridgeline rtl and I noticed they dont make a light bar mount for the ridgeline I had mines custom make if u like to see it I can send pics I'm also interested in the 3in lift and I dont confident enough to do it my self I'm will to by the whole kit and drive there to have u install it and u can even film it please let me know thx Chris

[@elijahmontgomery4146]

People act like these vehicles aren’t capable, but guess who pulled my uncle’s F150 out of a foot and a half of snow? Me and my stock Honda Ridgeline.

[@jmo2321]

Is this the same install for the 1st gen Pilot Subframe 1" kit?

[@SarathBou]

Would love to see a 2015 Honda Pilot lift kit.

[@sailingshadowfax7518]

Is this almost the same as the Pilot installation procedure?

[@v.i.p.andbuddyboy7398]

Where can I buy this lift kit. What website and what brand is it

[@Nohkral]

So what do i need for more ground clearance 2006 Ridgeline? Since you said it doesn't give more clearance

[@rudysalas6]

Thats what my brother was asking cause he has a Ridgeline and needs clearance

[@carinachuy06]

I have 3 inch lift and spacer kit and confirm to you you still get more more ground clearance from the height of just having bigger tires.. what I'm saying is you have more ground clearance than stock id say 2" s more

[@saelee33]

Damn. I just bought the 2" lift kit awhile back and now it's to late to return it. I really want the 3" lift kit.

[@cillbosby6326]

Can’t tell the difference! Just like your girl!

[@mitchf371]

Love the video man👌👌

[@dustinseverine7957]

Hello I was recently hir in my ridge line witch basically ripped off my rear bumper is there any kind of tube bumper or something I can replace it with that will still look good without the bumper cover on

[@braedenfletcher8026]

Would it be possible to pair the 3” lift and subframe kit with another 2” lift? For a total of 5”?

[@hrg_tv]

No because you would then have to drop the subframe another 2 inches. At this point you are into some serious cost-prohibitive custom fabrication, extending wiring harnesses, steering shaft extensions, longer hoses, etc.

[@MegaAvids]

I think you can though. You’ll just have the same exact bad axle angle that you would have with the normal 2 inch kit. The 3” kit with the subframe spacers would essentially make the truck operate perfectly as if 3” was stock ride height due to the subframe spacers fixing the issue of traditional 2” kit. However, if you add the 2” kit on top of this, or some longer struts 2”/3”, you’d be at the same place that you’d be as if you only had the 2” kit, in that, the axles would be at a bad angle. Just trying to over explain this theory but i think it is possible. The custom fabrication and all the expensive stuff is just if you want it to be functional. But if you want the 5”-6” of total lift just for looks, i think you should be fine. The suspension will be stiff but if its just a pavement rig you’ll be good

[@MegaAvids]

I would definitely love some input from Ben on this. I’m about to buy some 3” longer struts and the subframe spacer only kit. I currently have the 2” lift and 33s 24x12. I’m thinking of installing the subframe spacer to put the Cv axle angles at their factory angle and then install the 3” front strut, giving me a total of 5”-6” lift in the front only while I have 2” in the back. (I like this look). Essentially, my cv angles should be at the angle i currently have them right now without the subframe spacers, which I have had no issue with! This is a pavement rig all for show. I think this should work fine?!

[@viendunguyen4168]

Thanks it’s helping me out

[@98sauce]

Hey how about roof lights bar brakes. Can you make it to fit 52 inches light bar??

[@terryscroggin6034]

I installed a 2" hitch receiver on the front of my 2014 Ridgeline to accommodate a snow plow, but the front end really sags when I lift the blade. Do you have any ideas how to eliminate or reduce the sag when the blade is in service? By the way I take the blade off when highway driving. I just use the blade for my properties.