Huawei Lab Simulation Part 25: Implementing Inter-AS BGP/MPLS IP VPN Option-A on Huawei Routers

[@theophilusbittok1140]

Great Explanation sir

[@LyfeyTechnologies]

Keep watching and supporting our channel Engineer

[@mohaya447]

route target values are confusing on ASBR1 VRF2, Please elaborate

[@LyfeyTechnologies]

Hello, Thank You for watching. First I have to mention that with Option A, the VPN targets of the VPN instances on the ASBR and PE devices in the same AS must match for the same VPN. Remember you can configure multiple VPN targets on the router as we have done on ASBR. In this lab, we really don't have the 100:6 VPN Target, we just need to configure 100:5 on the ASBR and PEs. We can even use the same for ASBR and PE in AS 100. Hope this helps.

[@mohaya447]

@@LyfeyTechnologies got it, that extra RT value was confusing actually

[@mohaya447]

@@LyfeyTechnologies T hankyou for the knowledgeable content and for such prompt replies..

[@LyfeyTechnologies]

Thank You. Always feel free to reach out for any clarifications