HUBSAN ZINO - ZINO PRO CALIBRATION TOOLS - A MUST HAVE TOOL FOR ALL!

[@r.u.sirius7423]

Thanks Chris from Gainesville Florida. I just purchased a Zino Pro and right out of the box I have intermittent issues with the gimbal. It sometimes dances all over the place, quick little jerky movements. Sometimes this jittery movement last a few seconds, sometimes it lasts 10-15 seconds, sometimes it doesn’t do it at all. Landed on your channel while searching for a fix. I’m hoping I can correct this issue instead of returning the quad. Hopefully I can locate one of those plastic calibration covers, the one in the link you provided is sold out. Subscribed.

[@QCGUY]

Yeah it sounds like they didn’t calibrate it correctly in production so I would do the calibration software with the tool ad you mentioned.

[@simonsimon1989]

Hubsan creates the most user-unfriendly software updates and calibration methods. Good job, QC.

[@Dbell12221]

Chris, really appreciate the dedication you, and several others, give to your followers. As a new guy to the hobby it’s great to know there are guys like you out there to help us through the “process” of quadcopter ownership. I just got my Zino and it’s proving to be a good beginner drone, with a 4K camera to sweeten the deal. Thanks for help, support and encouragement 👍

[@QCGUY]

Dbell12221 Thank you 😊

[@davidlawrence2778]

I am awaiting delivery of the gimbal tool from China, new gimbal fitted and waiting to be brought back to life. Thanks for recommending it !

[@tungphamgia5594]

Oh my gosh!!! I couldn't believe that it really worked with my faulty gimbal. Plus, it also solves the error 0x0080 guys. Thank you so much, sir. Wish all the best be with you

[@seorais71]

Chris, many thanks for the help here. As another newbie this was invaluable after having to replace the gimbal on my Zino.

[@QCGUY]

That’s why I do it 👍🏻

[@jurajvis]

Very precious video,it helped me a lot today. It was pain on the brain,but with success.I went flying today and everything was normal ,but when i got home error 00800 occurred. I have to say that this tool is not stable at all,but despite everything i did it.Thank you mate

[@ParksNTech]

Thanks for this Chris! Really appreciate all the how to fixes for the Zino! You never know when you'll need them ☺👍

[@droneqld]

Thank you so much for the step by step calibration for dummies. This saves a huge amount of research by me. I'll give it a crack and let you know what happens after my next flight when the weather improves.

[@marcdelaunay1]

As ever Chris a really helpful video, thank you....and you and your support videos are the reason I bought my Zino which has performed fantastically...even after a slight landing mishap that meant the gimbal in protection mode kept coming in for a time...but once some grass removed and cleaned it was all,good and performs incredibly well, even in winds of 15mph plus....thank you. And all the very best to you and your family. 👍

[@QCGUY]

Marc de That’s good to hear. Thanks

[@paulbmy]

I have been following your videos and they are great if we have a problematic Zino. The Parrot Anafi version 2 looks better. I thought the Hubsan Zino would be a great alternative to Mavic Air or even the Mavic 2 but looks like we have to spend time troubleshooting and fixing the inherent bugs. We may have to wait a while longer until their production models is problem free “off the shelf”. I look forward to the day when you can say “Hubsan Zino is truly debug and problem free off the shelf...” Thanks Mate, from Australia...

[@QCGUY]

Paul Boon Thanks but I think you’re going to see hell freeze over first. Hubsan has never been able to perform this magic trick you speak of. 😂

[@davidcash6809]

Another great video! Here is my take on the tabs: CAL GYRO - just what it says CAL ACC - 6 axis accelerometer calibration CAL HALL - refers to the Hall position sensors which are feedback for the 3 axes CAL MC ALIGN - no good guess for that! CAL ENC - sounds like Hall sensor encoders

[@MrAndrearich23]

cal acc doesn't recognize all the side what can I do?

[@gustavob6772]

Hello. my gimbal is with error 0x0080, how do I solve this problem? Did it break the flex cable or the gimbal? or can I fix this error only with software and firmware?

[@yoranvantil1701]

Thanks for this software, i tried calibrating without the cover and it works aswell. Also i skipped the last step calibration with the numbers because there seems to be a timeout every time I click "start". Got my drone flying witin 5 minutes

[@QCGUY]

That’s why it without the cover. lol As long as it’s working for you is all that matters. 👍🏻

[@performancerally]

This worked perfectly....just whe i thought I was gonna have to buy a new drone. Thank you thank you!!

[@MrBodvarg]

Thanks to Chris, you speak slowly and clearly that I understand every word you say, I bought the gimbal mount and the program is installed on my computer. thanks again for all your youtube episodes.

[@QCGUY]

Bodvar Gudmundsson Thank you 😊

[@RobbyMaQ]

With your help I managed to replace my broken camera, calibrate the gimbal & update firmware on my zino pro. Thank you sir!

[@QCGUY]

Wonderful

[@drewup7456]

was your camera stuck to the back too?

[@QCGUY]

GIMBAL COVER TOOL: www.hubsanus.com/zino000-74.html www.geekbuying.com/item/Hubsan-H117S-ZINO-Spare-Parts-Protection-Cover-For-Gimbal-Calibration-418129.html GIMBAL CALIBRATION V1.1 SOFTWARE: www.dropbox.com/s/vh03qansr1yboo5/Zino%20Gimbal%20Tools%20V1.1.zip?dl=0

[@BPhDesigns]

Hello, by info ... Dear ******, Our customer care team has created a ticket on your behalf, with the following details and summary: Topic: Order status inquiry Subject: ****** Thank you for your shopping from Geekbuying We are sorry the item you ordered is has long production cycle, so the item is estimated to be in stock in 18th October Kindly let us know if you are willing to wait? Once it is available, we will arrange your priority shipment than other orders. When send out，we will send a message with a tracking number . We are sorry for the inconvenience caused. Customer Service Representative Geekbuying Item ordered at the end of September, I answered ... I can wait ;)

[@QCGUY]

BPhDesigns Good information! I know a lot of people grabbed these as recommended so no surprise. Hope you don’t have to wait too long.

[@BPhDesigns]

@@QCGUY I'm in the priority list lol. Cheers from Europe.

[@QCGUY]

BPhDesigns I bet they have your name written on the wall in the warehouse. ******* get first one top priority! 😂

[@BPhDesigns]

@@QCGUY LMFAO ;)

[@shark_za2296]

Thanks Chris, finally got my cover and was able to follow this process. Appreciate your efforts.

[@MrMandingo83]

thanks again for your support, you are my point of reference to solve the problems present on the zino

[@danclynes5264]

Thanks Chris!! followed your instructions and all works well. You're a hero

[@QCGUY]

This is why I do it.... Just happy something I put out helped. 👍🏻

[@glenmiller1437]

Thanks for the procedure. My problem was it would only initialize occasionally on startup, and I'd have to repeatedly restart it until it succeeded. (The look-up/look-down initialization would fail, and leave the camera pointing in an odd direction.) I bought the calibration cover and followed the procedure. Not sure that helped but in reading elsewhere, it was suggested that debris/dust may be preventing the gimbal motor from moving properly. Where I fly we have iron in the rocks, and it sticks to motor magnets, so I took off the camera heat sink, blew into the gimbal housing with canned compressed air. It seems to be working better, so fingers crossed.

[@Middle_-ws1pd]

БлагоДарю Вас за это видео от чистого сердца.

[@QCGUY]

Thank you

[@ivanogiacobbi5956]

tank you so much, no other tutorial in the web. just you

[@JohnOneThousand]

Thank you Chris for your another great instructional video.

[@lifeshouldbeinteresting]

Hey there Chris, you stated that if we are experiencing the gimbal vibrating or shaking or humming then this will fix that. What if my gimbal simply does not move or make a noise at all upon startup or while the aircraft is powered on? Also, while following these using the gimbal tool software, each time I "start" a calibration, the gimbal still does not move PLUS I get a "timed out" error on the gimbal tool software. Thanks in advance for your expertise. You're the greatest, Chris!

[@QCGUY]

Jakob Pyburn Same answer I just left on your other comment in the other video. 👍

[@dkryzer44]

Yet another great video Chris!!! We really appreciate it.

[@Greg_Pittman]

As always another Great Informational video 👍

[@TheMtotheArvin]

got it at the second try, had problems with the last step but worked out in the end an drone delivers no more error codes. gonna try it in the air soon

[@QCGUY]

Great 👍🏻

[@Daniel-dn8yj]

Thank you very much you are the best sub and the thumbs up is

[@QCGUY]

Thank you as well 😉

[@hikingriverandcanyonalfons121]

thank you very much !!! really apppreciate your help.

[@Terran99]

Thanks you a lot! i can calibrate my new gimbal and back to life the zino pro +

[@QCGUY]

Wonderful 🙏 Glad it helped. ✌️

[@wellingtona.9015]

Hello Chris your gimbal tools is not available anymore could you please upload the files again thanks

[@QCGUY]

It's there...you have to extract and download it on a PC it won't just open there in dropbox.

[@bongarbird2650]

I`m having a problem with zino pro plus while trying to do a gimbal update. The gimbal update starts in the program but after reaching 25% the update just fades with the program in Zino Update Tool V1.3. Afterwards it says in the APP that the Gimbal Status has an abnormal communication and the gimbal gyro calibration says request timeout. What are Your thoughts about that kind of problem? Also when switching on the Zino, the gimbal shows no fuctioning and stays stilll.

[@QCGUY]

Gimbal motor cable needs replaced. That’s why it’s not moving and that’s why it won’t communicate to do a update.

[@thomasspahn6095]

Thankx, from Germany, you make great videos

[@johncarroll9759]

John C Hi Chris, I just ordered my first HUBSAN, the H-117s ZENO Friday. I've been watching/saving all of your U-Tubs I can find. Just ordered the cal. gimbal tool and downloaded the program. I noticed down the comments a guy had a problem opening it. I double clicked it popped right open then after a single click worked. I'm a DJI guy Phantom 3 w/ARCteck antennas, have my C.D.P.L. I use the LITCHI app, can it be used with the ZINO? That app is the best thing since sliced bread. Oh yeah, by the way, folks need to be watchful of HAWKS etc. one grabbed my Phantom right out of the air but I found it using the LITCHI find my drone setting radar took me right to it about 1-1/2 mi. from my location. Had to replace the gimbal, props, Thanks for all you do

[@QCGUY]

John C You are well prepared 👍 The problem with the file is some are not downloading it. They just try to open it or are doing it on a phone and Apple products don’t work either. You do have to use the Zino app 👍

[@johncarroll9759]

@@QCGUY Thank you for the reply Chris. I noticed that in your distance test wit the ARGtec mod. you were using the the 10 GBBL antenna which is good for way points, flying behind you etc. But for distance the flat panel 6 GBI works better for some reason according to ARGtec. I've gone out to over 5,000 ft. with my phantom 3 standard with it, and around 4000 with the radial. I have an extra flat I can loan you to try if you'd like. I'm not so much a distance guy , I'm happy with 3500 ft. I do quite a bit of personal way point flying. Thanks again for being here

[@QCGUY]

@@johncarroll9759 Do you have a link? I'm not comfortable borrowing peoples things but that was very nice of you to offer.

[@johncarroll9759]

@@QCGUY www.wish.com/search/Argtek%206%20dbi%20panel/product/5c479ed6d058b Or AMAZON has them will not sell the panel only

[@johncarroll9759]

@@QCGUY Clicked that link error came up x-ed out went 29th product line down for 1/2 of amazon's price.

[@fredl.6368]

QC, the first step calibrate gyro, would I keep hitting start if numbers were off until desired results?

[@QCGUY]

Fred L. Only if they are far off but you shouldn’t have to if it’s level.

[@rajh333]

Thank you. Is there a tool to diagnose transmitter joysticks?

[@Sub-ux2tn]

My zino have the horizon unlevel. All calibration made. Any suggestion? Thanks

[@QCGUY]

Sub 33 It can take several attempts as it’s easy to do wrong but try a horizontal calibration on a flat level surface. Level counts in most of your calibrations like these.

[@Sub-ux2tn]

@@QCGUY already made with perfect level flat... the problem i have only in yaw rotation of the drone.... could the program Tool solve it?

[@QCGUY]

Sub 33 What gimbal firmware do you have in your Zino?

[@Sub-ux2tn]

@@QCGUY the last but also with old one same problems

[@Sub-ux2tn]

@@QCGUY i have bought a tool calibration waiting from china

[@juliov523]

Thanks, very useful!

[@VersatileTaxiServiceLimited]

Hi Chris I have a Pro plus and my Gimbal is not responding. What can I do?

[@QCGUY]

Share a video and more information in my group. Thanks facebook.com/groups/HubsanQC/

[@TonyDeConcini]

Is this a potential problem with Hubsan drones - specifically the new Zino 2+ I just got? Will I end up having to do this in future and does this cover work on the 2+ - or should I simply not worry about it until it should happen. Scared of even taking this thing out of the case and trying to set it up. So many issues that so many people have puts me off even trying. Might sell it and go for a DJI Mini 2 or wait until later in the year for the Mini 3 they say is on the soon-to-be-released list - so I've heard. Anyway thanks for your posts. Lots to learn indeed.

[@QCGUY]

It’s built into the app now but go with your gut if you’re uneasy about buying it.

[@TonyDeConcini]

@@QCGUY Well I ALREADY have it. It's been out of the case twice but just registered it and trying to learn how to fly using a cheap mini drone I bought for low price. Just afraid of sending $500 bucks to it's death sooner than I should ya know?! Thanks for the response sir.

[@ronchelsea1]

Chris glad to be a member I order a Hudsan Zeno Pro from Hudsanus and got it in but i am going to send it back to Hudsanus for repair or replacement. The camera works fine I just can not adjust the up and down of the camera. the zeno pro works fine and flies great. Got and suggestions? Tks Ron Williamson

[@QCGUY]

Ron Williamson If they take the claim send it back. I personally would get a refund and buy a new one versus them repairing it.

[@ronchelsea1]

@@QCGUY Thanks Chris

[@overfly_pt]

It's great calibration 😉🤗💯👍🤝

[@AJOXCHANNEL]

I have questions..gimbal protection cover for Zino 1 and Zino pro it's same?

[@QCGUY]

Yes 👍🏻

[@AJOXCHANNEL]

@@QCGUY zino pro and Zino 2 it's same?

[@QCGUY]

@@AJOXCHANNEL No Sir....look at the video title 👍🏻

[@AJOXCHANNEL]

@@QCGUY thanks you sir.

[@andy17ctdi]

Thank you for this video. I did not even know that you can calibrate the gimbal this way. I thought that the only calibration option was the one from the application on the phone. Which options can I calibrate without this special cover? I am happy to buy it, but delivery from China will take 2 months :(

[@QCGUY]

Some people cut a hole in the gimbal cover that cam with it and secure it that way and then use this method. It can take several attempts but it can work. I would use the tool in order that I showed you not just bits and pieces of it. Thanks

[@juanantonioayllon5213]

My dear friend. At last I was able to receive the tool to calibrate my Zino but… at the end of the calibration, in the ACC calibration, after giving starter, it keeps constantly calibrating the XYZ axes, in status 1 but it does not start to give the order 5 to start setting the different positions that you explain so well in the video. It stays that way forever. I have tried several times, I have even downloaded the program again .... nothing

[@QCGUY]

I have a support group you should go to. Thanks facebook.com/groups/HubsanQC

[@davidblakeman6692]

Thanks for the good guidance, Chris! My Zino had a shaky gimbal that only acted up in flight. As you know, when the drone turns left or right, the gimbal moves the camera a little in that direction. In my case, the center point of my gimbal was a little too far to the right, so it behaved normally on the ground, but a turn to the right or some wind turbulence was enough for the camera to hit the stop on the right and cause some shaking -- it drove me crazy! Two questions: 1) How come Hubsan doesn't have this stuff on their website?! I sure can't find it; the only place to get this info and the software is from you! (Same thing about "unbricking" the controller.) 2) I know the Zino 2 can't use the same gimbal cover tool -- where can I find the new tool, and will the Zino 2 have a different calibration software? (probably)

[@QCGUY]

David Blakeman Sorry, I cant figure them out on the lack of communication. As for the Zino 2 we will have to wait and see what they come up with there. Thanks

[@BPhDesigns]

Thanks Chris, cheers from Belgium.

[@NotB4nny]

Hi Chris, you gave me some great advice a few weeks ago that this should fix my hubsan zino pro's very erratic gimbal shaking. Every step of this works except for the first one; when I do CAL GYRO, it goes for a few seconds and then on the tool it says time out error. I've tried restarting all devices. Have you come across this? Thanks very much.

[@QCGUY]

Yes and I have helped others who asked the same question. Most have found that they have the quad in a bad location on a metallic table or magnetic object. Mine will fail in one area of my desk but then work perfectly on the floor away from everything. Sometimes you just have to keep hitting the button again after several timeouts and then all of a sudden it takes.

[@NotB4nny]

@@QCGUY You sir are an absolute legend! It worked perfectly! I can't believe I've successfully replaced and calibrated the gimbal on my drone. It's literally all thanks to you and your expertly detailed videos. Thank you so much, you've absolutely made my day.

[@QCGUY]

@@NotB4nny That’s great! Congratulations…

[@maxnunez3424]

thank you very much criss, I really appreciate it

[@catherinechan4770]

Would U test the current zino pro plus?🙏🙏

[@QCGUY]

Catherine Chan Only if they send me one.

[@omarmorales4769]

Hello Chris, question sir, this calibration software tool can be usted on my hubsan ACE SE R?, because there is no tool for my ACE SE R at the hubsan support page; and can be usefull the zino's gimbal protección tool for calibration on my drone?

[@QCGUY]

No sorry, this isn’t for that drone. You need to try the hubsan tool app for that drone. I have a video showing the use of that app tool as well.

[@theflyace]

Good, very good. My issue is that after a crash i notice that even if everithing seem to work good ... mean it' s fly good, it' s record good as previuos tha crash .. something in the stabilization seem to have problems ... during recording, the vids are jally during fast mooving of the aricraft in any directrion. I've perform many times tha app calibration but it' doens't fix anything ... Do u think i must try this ... and have chances to have succesful result ??

[@QCGUY]

theflyace This can’t hurt but have you changed all your props even if they look good? You could also have a loose or damaged gimbal dampener or something else you should do is take a can of air and blow out the moving parts of the gimbal. You would be surprised what a spec of dirt can do. When you say calibration I assume you mean you did the horizontal calibration on a flat level surface?

[@theflyace]

​@@QCGUY Of course, also in my mind there was the doubt about the dampers, so few days ago beforfore the crash i've dismounto the gimbal (without disconnectc any flat cable) to investigate some mechanical interference or failure of the dampers ... they seem OK ... anyway i' ve ordered a set of four .. and soon i' ll gone to replace those items. For the propellers ... it was the firs thins i' ve done after the crash ... but ! kzbin.info/www/bejne/f3jVmnR7ja2DgJI If you want to take a look at this video you maight have an idea of the issue i'm facing against. Thx !!!

[@QCGUY]

@@theflyace I viewed your video. Lets wait and see what new props do for you.

[@umbertoperna408]

Hi.....First of all Great video....I have problema with my zino1 praticaly I have shaking video when fly...I Need to do this procedure ...buy I haven t this gimbal that you use....It can be fine whitout or create a gole in the original gimbal cover for make this procedure???? Thanks

[@QCGUY]

Using the original gimbal cover defeats the purpose. If that was good for the gimbal then they wouldn't have made a special one to do the job.

[@corina2610]

Chris, thank you for your instructive videos about HUBSAN ZINO and I really appreciate your expertise. I got one ZINO 1 a couple of years ago. It was good at the beginning and I had fun flying it. Then the problems started to emerge: first the batteries just died even tough looked fully charged. I solved it after I looked at one of your videos and making the modification for a regular Lipo 3S battery. Now I have another problem: the camera on the gimbal started to limit the up-down movement and then stopped reacting at the remote's camera wheel command. It continues to takes picture, tough. I have image but the gimbal doesn't work at all (maybe a small movement on the startup). The application says gimbal error 0x0080 and then it changed to 0x0200 (not 0x2000 !). From time to time a "barometer error" appear on the screen, but disappear on restart. The drone flies well, but the camera is in a fixed position. I have the calibration gimbal cover (thanks to your recommendation on a video seen a year ago) and I did all the steps for re-calibration. At CAL MC step, gimbal was moving in all directions proving that the motors work. When calibration finished, I restarted the drone, and after a small up-down movement of the camera, the gimbal went limp. I did the calibration a number of time with no success. Please tell me what should I do? Thank you for your time!

[@QCGUY]

Ox0200 is a hard one because it can be either a cable issue or board connection issue. I always recommend changing the gimbal flex cable and usually that is the fix. Hope that helps 👍🏻

[@corina2610]

@@QCGUY Hello Chris! I ordered the gimbal motor's flex cable and change it. The first error that appear on the application was "the gimbal angle sensor is abnormal" and on gimbal tab it's says "error 0x0080". So, I did the gimbal calibration (BTW, the CAL Gyro was taking 10+ times until I got an acceptable 0,3,0 and finish. The rest were "Time out" trials). At the end I started the Zino and gimbal is not working (at the CALL MC ALIGN all the gyro movements were ok) so the cable and the motors are working). The gimbal is limp and the app is saying "Error0x0200" like it was with the old flex cable. Please tell me what should I do next? Thank you! (PS: the problem appeared not due to a crash. Zino was flying and I observed that I haven't full angle up-down control of the gimbal, from the remote wheel. The next flight was without gimbal stabilization and control. Just the image was working ok).

[@QCGUY]

@@corina2610 sorry without seeing it first hand it’s hard to say exactly if you have already changed the cable, confirmed all 3 axis motors work and tried updating the firmware again. That’s all I can tell you without having it in my hands. Sorry

[@andreyporivaev9557]

Hi Chris I have a problem with my hubson zino pro..The gimbal needs adjustments..Did calibration and it didnt work, changed the gimble cable and it also didnt help. Is there any way I can send it to you so you can fix it for me?

[@QCGUY]

Shoot me a email for my address information. 👍🏻 [e-mail]

[@ftcruz2003]

Hello, Happy New Year everyone. Btw, am waiting for the delivery of my zino pro. Should I also have to do calibration for gimbal and all once I get it out of the box or is it already ready to fly... Sorry, just excited for its arrival and to fly it... :)

[@QCGUY]

Yes always do calibrations on new out of the box quads.

[@ftcruz2003]

@@QCGUY Thanks so much, sir...

[@ftcruz2003]

@@QCGUY Sir, can I use the Eachine EV800DM goggle with my Zino Pro?

[@QCGUY]

Francis Cruz Do they pick up the leas transmission? I don’t know of anything that does so my guess is no. A device with hdmi output and goggles with hdmi input is all I know to work.

[@ftcruz2003]

@@QCGUY Thanks so much, sir... Good thing I didn't order one yet, i was a bout to as I was excited with my new zino pro... you're a lifesaver, sir... Thank you so much again and Happy New Year to you and your whole family... :)

[@michalb4675]

Hello, i Need help. My Gimbal shakes, exactly the sounds you show, but when I try to start from the CAL GYRO tab after 2 seconds I get the message Time OUT error. Other tabs pass without a problem. After turning off it is still the same. What could it be? thanks for help.

[@QCGUY]

Show and tell in my group please. Thanks facebook.com/groups/HubsanQC

[@YanisFafis]

great video QC - thank you alot!!!

[@uksewingmachineservice7030]

That's brilliant mate thanks for the info great job nice one don 🤠🇬🇧👌👌👌👍👍👍👍

[@PapiChulo-ch1hd]

Hi bro, I need your help. My hubsan zino drone does not stabilize properly

[@davidblakeman6692]

Great video, Chris! Gimbal tool has been ordered, and calibration software has been downloaded and unpacked. I noticed at the end of your calibration demo that the video shows you stopping the software, unplugging the drone, and then removing the battery. The video jumps just before you removed the battery -- did you turn off the drone first and the video skipped that part, or do you indeed remove the battery while the Zino is powered on? I'm thinking the former. Thanks!

[@QCGUY]

David Blakeman It’s not that critical but just turn the quad of and do everything else in whatever order you wish. 👍

[@chinhta2026]

What should I do when the CAL ACC does not recognize any faces?

[@QCGUY]

Not sure to be honest. Sorry

[@ThePadawann10]

Same issue for me. It recognize only face 1 and 2 but not the other. Any suggestion to help?

[@QCGUY]

Xavier H Keep at it but try a horizontal calibration first next time.

[@whome7004]

Nice job I Appreciate you sharing these steps to help with Zeno ,would you recommend like the gimbal calibration tool,to pick up a extra camera head to have in Zeno Box of tools and tricks?

[@QCGUY]

I was going to do a video on that. I don't think you need a spare camera but this tool and a few other things would be smart.

[@whome7004]

@@QCGUY I got to tell Ser This Pro I'm the one that talks alot and really dont buy alot! Maybe 25 drones, Quods Most ever spent 300$And the Dang thing Flow twice Hubsan I got from RadioShack Was my first it went through Hell Flow off after 4 mouth ! Tello after 300$ turd dropped little a rock Promark Walmart was best thing I had since first Hubsan, I think If I try my best This Zeno Pro Can be balt but I will have to stop undergoing Treatment From my Psychiatrist in order to get it ,my Father pays for treatment and drones and he is done paying for Drone till I'm done see Doctor, I wish I could snap my finger and have no need for Psychosis but that what I will to do Zeno Pro Please don't let me down I could be trading alot more than $ from U ,That the way life works me I hate watching utub to see what3I enjoy most and I hate not Enjoying what I like to stay Mr,Clean Hubsan u hooked me like something sold on street corner . I would know because The treatment keeps me away from the stress corners and shooting up in alleyways, Be the one worth and last Like your Hooked on me,I got no more chances.....

[@QCGUY]

Charles Wall I understood your first comment but your last one took a little work to understand. Sorry 😐

[@NguyenDuy-cj5vg]

Tks you share clip 👍👍👍

[@ЮрийКоролёв-к6б]

Hi I have a calibration in the section CAL GYRO writes Time out error.Can you tell me what this means?

[@QCGUY]

It can take multiple tries but it's not a fix all so if there is something wrong with your cable for example then it will time out and never do the calibrations. I can't say for sure without seeing a good detailed video though.

[@구오오-o4m]

Hi Chris! I remember you linked the calibration program before, but I don't see it. It may be inconvenient, but can you tell me where I can get this program or give me a link?

[@QCGUY]

It’s in the description of the video 👍🏻

[@QCGUY]

and in the first pinned comment

[@구오오-o4m]

@@QCGUY You are my hero. Thank you. :)

[@ajprotteveel]

Hi Chris, thanks for the informative video . When I start the Cal Gyro, it gives after several second the message. "Time Out Error".. I restarted the proces of conecting several times, but no result. Can you give me a clue how to solve this? Best regards, Fred

[@QCGUY]

Don’t restart as long as it shows drone connected. Just close out the error message and try again. It can take several tries to get it.

[@dukedillah]

QC guy is that ok if I used this tool even though I don't have any gimbal issue? Thanks

[@QCGUY]

My name is Tinong It doesn’t hurt anything if done right but why do it if you don’t need to?

[@mrilya1207]

Hello, will it work for zino pro plus?

[@QCGUY]

Yes it does 👍🏻

[@MrFatist]

Hey again. Thanks for the great content. I just got my zino pro and It has a problem when I was flying pretty fast and recklessly in a 6 knot wind the gimbal locked and rolled with the drone a few times. I'm wondering is there is something software related I can do to fix this problem or I'm just flying way too hard.

[@QCGUY]

Aren Watson I don’t think so but then again I don’t have anything to go by like seeing it or knowing your firmware but this would be something to share in a group for answers.

[@구오오-o4m]

Thank you for your great video. I am sorry but have a question. I think the gimbal gyro of my zino is defective. What parts should I replace? I've already changed the ribbon cable, but it's not. Is it a cylindrical part with a camera lens?

[@QCGUY]

Why do you think you have s problem with the gyro?

[@구오오-o4m]

@@QCGUYThank you for your answer. Umm. . I thought there was a separate part called GIMBAL GYRO, but now I think I was wrong.Should I change the img cable to a new one?

[@QCGUY]

@@구오오-o4m how about you tell me what is not working and what error messages it gives you?

[@dronevideotravel7518]

Very nice share ;))))

[@osbocasmalditas]

hi, my hubsan zino has an error in the gimbal 0x0002, what could it be?

[@QCGUY]

I don’t recall sorry... Show a video of the gimbal when you turn on the quad and then show the light on the side when it’s done starting up. Thanks

[@osbocasmalditas]

@@QCGUY could you help me

[@3fees]

Well Done

[@QCGUY]

I liked your original comment. Yes it should be in the app. That would be easier for sure 👍

[@IanKeal-k7e]

Hi Chris, Does this also work for the EXO Blackhawk Pro 3, which is a Hubsan Drone? I have done the Error Code 0800 calibration through the App on my phone and the gimbal is still not operational. No, I did not crash it. It worked fine yesterday, today it is not working at all. Thanx.

[@breadelicious8354]

Hi Chris, thank you for this video. I ordered the cover and followed the instructions exactly as described. Unfortunately now after finishing the process, I have got an gimbal error 0x2000 on my Zino Pro and I am getting the failure message " The gimbal angle sensor is abnormal" I have redone the process, tried to reinstall drivers. Nothing help, now the gimbal is dead and I am unable to do anything about it. Would you please have any suggestion what to do? Thanks a lot

[@QCGUY]

2000 without a doubt is bad or disconnected gimbal flex cable. They can fail for what seems like no reason at all. If you have had it apart it might not be connected to the board. If you haven’t had it apart it most likely needs a new cable. I do a few of these a week sometimes.

[@breadelicious8354]

@@QCGUY i watched your other video related to this seems like i gotta order new one. Thank you. From my understanding it is the same as for Zino Y

[@breadelicious8354]

@@QCGUY however the weird thing is when I do the calibration the MC align so as the device moves the gimbal it works as usual

[@QCGUY]

@@breadelicious8354 If it moves in the calibration program then it may be a matter of completing the calibration successfully. It can take several attempts. You have the correct gimbal calibration cover right?

[@breadelicious8354]

@@QCGUY Yes right the one you recommended. I noticed that when I do the ACC calibration, the numbers pop up in a different order than on your video, I however follow the positions as you show in the vid. Not sure if this can make a difference

[@dimitristris8889]

It is a very informative video. I have used the gimbal tool, the in app calibration and the cable re-positioning. But I have no luck on fixing the gimbal. Any other recommendations?

[@QCGUY]

I would have to see your problem but have you replaced the gimbal cable?

[@dimitristris8889]

@@QCGUY No I haven't. These cables are very sensitive and the procedure to change them is possible to add more problems to the current situation of gimbal. So there is nothing else that can be done except the change of the cable?

[@QCGUY]

@@dimitristris8889 I replace about 4 a week between the gimbal and camera cables so for me it’s a simple procedure but I haven’t seen your problem or any details so I can’t say for sure what you need. Some just need this calibration but can’t get it to take and then after sending it to me I get it first try.

[@dimitristris8889]

@@QCGUY pretty difficult to send it to you, I am from Greece. I have done plenty of fixes in smartphones and computers, so I will have to find time and will to fix it. If it does not get fixed then no worries, I will buy a proper drone. I feel that this is not good drone. It is not that stable and lacks the optical flow that is very helpful for beginners. But the worst thing is that hubsan gives you a very bad battery charger that makes batteries fail after charging them no more than 10 times. Also congrats to you for the other video about the balance battery chargers. Unfortunately I found your videos after my crash and the problem about the gimbal. I am thankful about not injuring anyone and not damaging others property. This drone is a cheap craftsmanship by all means.

[@Jorge-vt6ej]

hi, i have a zino pro and the gimbal when i turn on the drone it tilts to the side and stabilizes during flight but it takes a couple of minutes. Would this be solved with your software?

[@QCGUY]

Jorge most likely but first thing I would do is make sure you’re cables aren’t loose out of position causing a bind and blow out the gimbal with a can of air.

[@Jorge-vt6ej]

The cables are ok. When gimbal stabilizes It remains not totally horizontal

[@QCGUY]

@@Jorge-vt6ej Sounds like you need to calibrate it with the gimbal calibration tool and software.

[@ojerez1975]

Thanks for the video. I have the Zino Pro Plus that gave error 0x2000. In your other video I saw that the gimbal cable had to be changed. Once the new one is mounted, the error it gives me is 0x0002. Do you know what it can be?

[@QCGUY]

Calibration tool needed

[@jagsidhu4559]

I have a Zino PRO and the image is slightly blurry. Is there a fix for it?

[@QCGUY]

I don't recommend you do it just like this guy but he has the right idea. The only thing I strongly suggest you do differently then him is unplug and take the micro board out before making the adjustment and move it in smaller amounts then he did because you can easily go too far. I also recommend making a tool and not tweezers. kzbin.info/www/bejne/Z5LHiGCJgbdgi5I

[@MrDoomi-in9zm]

This tool available for zino 2 or not ya....

[@QCGUY]

The 4m7 Not now anyhow....

[@MrDoomi-in9zm]

Huhu ..sokay..i already fix it with my magic touch🥰🥰

[@wmp59]

What brand card reader do you use for your Zino to download videos? My iPhone will not work with reader I purchased ! Something is not right!

[@QCGUY]

I don't have a link but mine is a card reader that has a lightning connector on one side and then the usb on the other so I can pull from my phone as well as a micro sd card. It say Dooter Card reader on it but I can't find where I got it. lol

[@lorettaallen7388]

Hi Chris. I purchased a second hand Zino a few months back and after updating the firmware I crashed it. Only then did I discover your excellent videos and your warning of caution before firmware updates. I then bought a seconf hand Zino Pro and now I get a "Calibration Failed" message after running the calibration. I'm assuming that I need to use the calibration tool but they are now impossible to get (I'm in the UK). Any suggestions where I could get one?

[@lorettaallen7388]

Managed to find one. Should take a week to get here so wish me luck. Thanks again for awesome tutorials.

[@QCGUY]

@@lorettaallen7388 I hope it all works out for you 👍🏻

[@lorettaallen7388]

@@QCGUY Had to get it from China in the end but arrived today. Got a Time Out message at the first stage but carried on and it looks like it's worked. I'll try and test it properly tomorrow (If UK weather will allow).

[@QCGUY]

@@lorettaallen7388 Thats very normal to get the timeout message. You will be good now 🤞

[@lorettaallen7388]

@@QCGUY Sadly it didn't work. The camera works up and down and tilt but is very loose on the sideways rotation. I spotted another video from a guy who referenced your one and he said that it took him several attempts before it worked but despite trying it 5 times it still wont move the gimbal to the side during CAL MC ALIGN. I'm hoping that it's nothing too serious as I don't want to be taking it apart.

[@fernandopasini6350]

if i change the gimbal cable will i have to do that?

[@QCGUY]

Fernando Lucchetti Not normally but possibly on rare occasions. In most cases you do not. 👍

[@harryploeg3382]

Chris, is this the same calibration tool for the Zino pro ? (v 1.1 ) ? Thanks , Harry the Netherlands.

[@harryploeg3382]

sorry, y see the answer, thanks

[@edmacdronemanutec9886]

The tool don't find the Zino 2+, is it doesn't works in that quad?

[@QCGUY]

You have a built in application in the app on the Z2+

[@edmacdronemanutec9886]

@@QCGUY Ok, I understood... but even in the app the calobration doesn't work... I think maybe I have to replace the flat cable...

[@QCGUY]

@@edmacdronemanutec9886 What is wrong that has you trying to do this? Is the gimbal not working in some directions or all directions?

[@edmacdronemanutec9886]

@@QCGUY it doesn't work in any direction.

[@QCGUY]

@@edmacdronemanutec9886 yeah you need to fix that problem first. Maybe one of the cables or the gimbal board.

[@victorsaiz5900]

Hello Chris!! Really helpfull. is tis procedure suitable for Zino 2? Where can I get the calibration tool for Zino 2? Thank you a lot!!!!!!

[@QCGUY]

No sorry it’s not for Z2

[@mikebelanger4165]

Chris, the Gimbal Cover tool is sold out and I doubt they're going to have more any time in the future.

[@QCGUY]

Are you in the US? www.hubsanus.com/zino000-74.html

[@mikebelanger4165]

Chris, what about (in the case of your old one that I now have), I'm getting a "The gimbal angle sensor is abnormal" error in the app and the gimbal pitch control isn't working any more? I DO have camera, but no gimbal pitch control; this just started happening after I updated the firmware for Hubsan's most recent, from their site. I also see an "Error 0x2000" in the gimbal calibration area. I have version ZINO_G_V3.0.2.13 installed for the gimbal and Zino_IT_V0.3.6 on the drone itself. Flight control software shows as Zino_FC_V1.2.11

[@QCGUY]

Sorry I just saw this but your cable has decided to fail and needs replaced if it’s code 2000. It happens and is most often the case.

[@mikebelanger4165]

@@QCGUY AFAIK, I'm not getting any error codes from it.

[@QCGUY]

@@mikebelanger4165 You definitely have a code in the app settings under gimbal…check 👍🏻

[@jeffreymurdock7446]

Chris after I got it last November December time cuz I was a backer i this mess , I went out and got a hard case with foam and customer my zino for travel and the storms came and pretty is been work work work just enough time to pay bills and some videoed and then bed time you know the drill. This weekend it’s pretty much catch up

[@kaflex7896]

can i skip the part with the cover? maybe it will still fix my issue

[@QCGUY]

Yes, sometimes it can

[@kaflex7896]

@@QCGUY im having a problem which occurs when the drone is spinning, the horizon tends to tilt when it spins fast, even for a very short time. It doesnt happen when i spin it słowly, weird

[@antoniodiaz6203]

Great video. I need to change the camera for hubsan zino pro plus but I can't find it. could you help me with that?

[@QCGUY]

The camera or camera cable?

[@lilfilipinogurl]

I have a mac book. Do you have the mac version of the calibration tool?

[@QCGUY]

Jennifer Miller I have a MacBook and just got the newest iMac and would love this for macs. No such luck... 😔

[@yanicksavarzeix3364]

Hello guy I don't have a camera problem but rather a stabilization problem can we do only the CAL ACC part (IMU calibration) (your video is SUPER)

[@QCGUY]

You can as long as you have that option sure. 👍🏻 Thanks

[@yanicksavarzeix3364]

@@QCGUY if I do that the ACC CAL is what to put the camera calibration cover si je fais que le CAL ACC est ce qu' il faut mettre le capot de calibration de la caméra Merci

[@QCGUY]

@@yanicksavarzeix3364 No you can do that part alone without a cover. That is the IMU calibration portion pretty much. I would do the calibrate gyro first and then the Cal ACC.

[@yanicksavarzeix3364]

@@QCGUY ok good et merci

[@francoisBonin-phils]

Your videos are so helpful , did you have problem with the focus of the cam?

[@QCGUY]

Thank you! I have not had the focus problem.

[@HelloHello-zm5ct]

After I done the calibration and went out with the drone and about 40% battery the Wi-Fi on the drone kept on disconnecting and it kept on flying up until I managed to connect it to its Wi-Fi and finally landed it do you know how to fix it?

[@QCGUY]

Have you tried different channels in your settings on the app?

[@MankiesWorkshop]

Hey there... Will this also help for a not horizontal gimbal problem? I have done the gimbal calibration inside the hubsan app a dozen of time, but as result the video is a little bit (i think 2-4 degrees) turned.

[@QCGUY]

Mankie's Workshop yes it can help but not in all situations. The unfortunate thing about these birds are several can share the same problem but not the same solution. I however have worked on some and fixed The horizontal issue with the gimbal.

[@MankiesWorkshop]

@@QCGUY Get my cover a few days ago and made the whole process like you. Sadly it doesn't helped for wrong horizon: kzbin.info/www/bejne/d2W5m52BorJ0nZI Do you have another idea to correct the gimbal? Mankie

[@QCGUY]

Mankie's Workshop First off blow your gimbal out with compressed air like from a can. The joints can collect dirt and such so that won’t help. Then do a horizontal calibration on a perfectly flat surface before doing this again. When doing this make sure every axis point is level and hold it steady. Try that and let me know. 👍

[@MankiesWorkshop]

@@QCGUY Ok...thanks for the hint. I'll do this when i get a can of pressure air or so (habe nothing here yet). I'll keep you informed!

[@tatougiraglia935]

I, I've made the setting of the lense this morning, and it improved the focus by turning it clockwise a little, but now, when i turn the drone on it, the horizon, don't stay horizontal unlike before, It's tilted. I've tried to calibrate the gimbal many times. The process was successful, but the problem is still there. What can i do to correct that. Is there something to do with the firmware updates? Thank you.

[@QCGUY]

Tatou2B Sounds like you disturbed the cable connection. Post it in my group with a video. facebook.com/groups/HubsanQC/?ref=share

[@ralphottaiano202]

i don't have KZbin Premium so I don't have your description tab. how else can i find the gimbal tool software?

[@QCGUY]

It’s there and in the first comment no matter if you have premium or not. Look at the top comment.