Breaking Down The Ebay Turbo 500HP Single Cam D16 CRX

[@danksolution1693]

I made 433whp 307wtq at 21psi on a d16z6. I built it in my kitchen.. Stock cam.

[@sungodman001]

Dank Solution what turbo?

[@danksolution1693]

文刀 precision 5431

[@2_2_4_3]

How's the head gasket holding up, just curious since they are prone to burn out?

[@MultiChimRichalds]

You're definitely single lol

[@Psykam]

@@MultiChimRichalds *wife walks in to see greasy ass bearings on her counter*

[@freddyrosenberg9288]

I have made 220 WHP (~9psi) on my 100% bone stock D16Z6 for the last 12 years, absolutely nothing broken.

[@vtec3070]

d16z6 vtec + boost ? How did that go ? I have a z6 myself and would like to know.

[@harryazzole7814]

@@vtec3070 most people don't tune with 2 separate cam profiles, basically VTEC is always "on". Makes it easier

[@RiggsGarage]

Do you have head studs?

[@SpenserRoger]

@@RiggsGarage he might not but it's a great idea. 230whp is attainable on a stock z6 single cam with a bigger turbo. I used to run my stock ZC dual cam D series on 15 psi lol. Only mods were 450cc injectors, 6 puck clutch, turboedit, and proper crankcase ventilation routing. Made my own manifold out of HF manifold and adapter plate. Hardest part was downpipe and getting a bung put on the oil pan lol. I actually just went to the industrial area in my city and asked people to help me make the stuff for $20 bucks lol.

[@RiggsGarage]

@@SpenserRoger awesome! Good news to hear people doing this stuff right, on a budget, with some common sense. I have a B7 currently, considering rods and pistons for it since they make them now.

[@hngrypanda5973]

That's a perfect combo for the street. My dream build right there. Maybe a little less power like 400 or 450. Awesome cars guys.

[@zackm6850]

10 years ago me and my brother built a vitara piston and eagle rod d16 had it tuned at speed factory. Back then us and the shop was not sure about the cast pistons. James tuned it to 15psi and it held great. Now its crazy to see how hard people push them.

[@gtgodbear6320]

Aaaaaaawww, look at that cute little head. Hopefully it wants to be a K20A Turbo when it grows up. That's what I'd want to be when I grew up if I was a D16 single cam.

[@DeadFront1319]

Saying it now, I see big things for this channel, always comin with that 🔥🔥 content!!

[@Vanessa_Gi]

Single cam for life Orlando Florida in the house respect ✊ ✊✊✊✊✊✊💥💥💥💥⚡️⚡️⚡️

[@LatinoAD]

Heck yeah p2p0 rods and ycp vitara pistons ftw. Classic, cheap, durable💯👍.

[@fixitup2193]

Just sell them as crate motors....like a kit with a ecu and supporting parts or list of parts

[@humbleperformance]

We do.

[@groundcontrol6876]

Humble Performance a cuánto? Tengo una CRX y me encantaría montarle un palo sencillo del diablo.

[@lilgbzy4086]

Humble Performance still sell them as crate motor ?

[@quangathy]

@@humbleperformance how do I find?

[@justinhorton9684]

I'm interested in buying a full swap, what's your contact information?

[@LatinoAD]

Heck yeah 🇵🇷 simple trick. Vitara pistons and a cheap aluminum blockguard in a d16/d15 💪. What I'm building now a year later and having Alex tune for me when I get to OK next yr.

[@TheRealAaronWitchey]

Hell YEAH! Single cams rock!!!

[@da_vanillavillain]

Love this channel. Would love to see more B series and D series stuff. Love the little single jungle though. Sincerely a Mustang guy.🔰🔰🔰🔰🔰🔰🔰🔰

[@Boogerboys1990]

Nice vids. I get all real stuff on eBay. They get a bad rep over China junk. Shout-out to real street for the hookup. eBay is just a site. It's all who u buy from. Keep it up!👍👍😁

[@valeriesanchez3074]

Love the D16. Throw in some suzuki vitara pistons and rods, got you a strong bottom end for cheap. So underestimated. Great motor.

[@fincamunicion602]

Can't wait to see what it can do!

[@corysamoila]

BEST CAR AND VIDEO ON KZbin!!!! Dream, set up an ride. One day I'll have a 90 CRX SI

[@corysamoila]

Maybe you can make T-shirts with the slogan, "Dream, Set up & RIDE" Then you can use a % of the revenue from the t-shirt sales to ship me a CRX lmafo!!! Make a KZbin video of the exchange/gift and get more subscribers

[@joshjones2053]

Cant wait to see what it can handle!

[@pFbSpecV]

Pretty awesome the sohc builds are still around!

[@jasoncooper9971]

Guys what solutions do you have for preventing head lifting on the D series I have a build d16y8 arias forged pistons Manley rods no block guard.. Arp head studs torqued to 60ft/lb car made 340hp/277trq @18psi @20psi I suspect the head started to lift as it started pushing coolant timing was also very conservative... Any solutions? How much trq do u guys apply to the arp bolts? Should I retorque the head or change the gasket.. Car never over heated either.. Any an all help appreciated

[@victoraguirre8839]

I'm curious about what transmission this build is running and how it holds up to this much power. I'm guessing it runs on stock axles? Which clutch is holding that much power?

[@jcrisen5417]

Any issues with gasket failures. Is it o ringed? Just arp headstuds?

[@ProjectCarTV]

Nice.

[@dzgarage5646]

Is it on standard size arps still have a similar build going right now?! Love the channel and this crx!

[@rider1616]

D'z Garage for this power I would recommend drilling and taping to accommodate larger Studs. Keeping a gasket sealed in anything over 25 psi is problematic. You can use different gaskets, but real additional clamping power is what you need.

[@jccivic]

What manifold was it using ? Link would be appreciated

[@ghostboy4091]

Should I swap my z6 from my daily into my wagon or buy a d15b non VTEC? The d15b I can get for 600 and if I swap the z6 I can get a custom harness plug and play for 390. Also the z6 was just rebuilt less than 10k on it.

[@DericCribbs]

Can you roll in fresh bearings while it's in the car on a d16? How often do you freshen it at this power level?

[@javiertorres6067]

Dingus E. Dow a d crank does not weigh over 100 lb

[@javiertorres6067]

Dingus E. Dow yeah so small

[@matthewsanchez8624]

I have a turbo d16z6 in my CRX, with upgraded internals, and the only thing left stock, are the ‘rocker arms’. (Not sure if that’s the correct term?) But the contact pads were worn, and I replaced them with oem parts.Did you guys use upgraded rocker arms? If so, I’d like to know who sells those after market rocker arms.

[@FriedEggsandJellyfish]

Well I know what rods to buy for my z6 now lol. Did y'all notch the girdle or cylinder walls

[@ericguzman6585]

What compression pistons are you using? My b16 turbo blew the sleeve on the dyno at 400 hp with cp 9:1 pistons, I did not have a block guard

[@humbleperformance]

We run 10:1 in everything boosted. Vitara pistons are lower compression though, this motor was built by someone else.

[@BTB_Works]

hello, i have a quick question and was ondering if you could help me. In summer im gonna go turbo on my D16V1, vitara pistons, speed factory no notch rods. but i need some arp headstuds. Now, i see that there are studs for z6, y8. Which studs would i need for the d16v1?

[@andresotero7378]

How many miles did the bearings last for?

[@isaacvalentin966]

You said skunk2 valve springs and retainers so is that with stock valves?

[@SikkRaz3r]

What's the full specs of the motor like bearing clearance on the crank with the rods / p2w gap /upper and lower oil ring gap I'm building a z6 with the vitara no notch rods n pistons and there tricky not many forms on the sets ups

[@kracksmith4ejm1]

why did that bearing getworn out so badly?

[@carlosvela8606]

Aquí un crx d15 en Morelia Michoacán México...olvidado ..ansioso por ser modificado

[@Chepeinf]

What kinda headstuds would you guys recommend for 600+hp on a d16?

[@masonhorrocks1602]

Arp Arp all around best

[@lifeofamanny3903]

Vitara pistons? I’m running vitara pistons and eagle rods in my d16

[@d_org370]

What you guys recommend. Block guard or not? I'm thinking going for 400+hp. I'm going to install Flanged Darton Dry sleeve and I'm thinking about CSS BLOCK too. Thanks you guys are the best

[@humbleperformance]

CSS is the best bang for buck.

[@d_org370]

@@humbleperformance any recommendation with Darton dry sleeve. Thanks

[@rembi4766]

thanks for motivation im starting to build d16 turbo but i was thinkin about b series too but i think i cant afford it looking at the prices of good shape b series and boostin it i prefer to make the same power of a sohc and if it brakes u can always buy another one. In my country there is not too much b series but d is rly cheap and eaasy to get

[@HardKnocks160s]

What stage? Skunk2 stage 2 or stage 4? What did u need to install it?

[@hondarob5371]

Save the Sohc life! I'm looking to pull my h22a to do a f22 non vtec with nitrous.

[@1grinding597]

Robbie Keller fuck the nos just use that money on a turbo set up for the f22 unless you already have the N20 stuff

[@4door_papi]

Go boost

[@4door_papi]

Itll make tq bro got a buddy maken 300WTQ @2800rpms

[@4door_papi]

Dingus E. Dow how big a bottle? And how much it cost to fill it??!

[@flatwoodzmafiabmx5767]

Okay, I know this is old but why go from a dohc very sought after engine to a single cam? Because they're easier to find? Because I know that h22's can make power easier!

[@CrashxHitman85]

Man that engine was trying to jump out in the first shot

[@darrellwoods5961]

I got the exact lower end setup on my d16z6

[@Rarien1337]

Holy fuck and this is RECENT? Bruh. Subbed. New favorite channel.

[@humbleperformance]

bobby luke yes. The crank is currently at the machine shop. Thanks ❤️

[@nsrracing1]

That is a clean ass crx. How much of that was you vs done? (Exterior)? Why stop at 500?

[@beardedbeekeper7149]

Is there a list f parts you guys used.

[@drtalon1668]

What brand head gasket did you guys use in this build?

[@BoostedDilly]

Looking to make 550-750 in my F23a1!

[@SkyTheHondaGuyy]

What transmission was this crx running

[@traviscorbett2442]

I have a f22a1 non VTEC I want to build up to at least 350 to 400hrp without using boost what should I get let me know and I'll make a video of me putting everything you say on it

[@IrnMaiden304]

How much psi were you guy's pushing on this build on the turbo being used?

[@bw1583]

what brand are the new bearings you put in?

[@ragelucas7830]

Wish we were close by I’d have my car done by you guys #humbleperformanceftw

[@anthonymontoya8039]

Rage Lucas #AllIWantForChristmasIsA#HumblePerformanceTune #InMyDreams #OneDay

[@fabiancastillo5784]

How much did you spend overall to get 500HP

[@MBSNAPZ]

Puerto Rico does it best! Save the SOHC 🇵🇷

[@Eternalblue17]

What block is this? z6, a6, or y8??? I'm assuming that you're running a shimmed y8 oil pump? This is awesome btw. Looking to build a D16 with close to 400hp. Thanks!

[@nephron9924]

Z6

[@jchutch]

I call dibs on the crx mudflaps if he ever parts it out :p

[@413rdpupi4]

What oil pump for this setup was used ?

[@patrickdailey4825]

What block and head is he using y8 or z6

[@daniel226]

I have a stock 97 hx Civic with a d16y5 115hp I want to turbo it and try to get as close to 200hp without spending to much. Any help is greatly appreciated.

[@adamhonda98]

The reason you don't want to use a single cam for a high boost application is because if you put all that pressure to 1 cam instead of dividing the job into two cams you can snap that camshaft in two parts or more specifically to small camshaft that only one rotate and that's why I do cam is more efficient because you're not putting all the stress on One cam you can make more power without worry that you're going to snap a cam in half it takes some strong metal to do one cam

[@j.feldmander1956]

Adam Honda98 not sure what your idea of high boost is, but my single cam non VTEC motor is on 25 psi on E85 and it's not snapping anything but the necks of V8 guys and Porsche guys and BMW guys and Corvette guys when I blow their doors off.

[@dpedd12]

The cam is like 10 inches long. It's not gonna snap 😂😂😂

[@hammondj82]

Wtf? I’ve built plenty of D-series engines and never had a camshaft break. Sounds like you need to go back to engine class.

[@mshahrie8498]

What piston size and brand?

[@FroztiProductions]

If I want between 300-400hp should I use a block guard and stock sleeves on a y8?

[@humbleperformance]

FroztiProductions - To be Safe yes.

[@TK9320]

Where do you get those wheels? At 2:40?? What are they?

[@humbleperformance]

TK9320 - They are Belak Wheels. We are a Dealer for them.

[@gilbertsantiago2921]

Pienso en hacer un swap engine de mi Sohc civic 2000 a instalar un f20b ! Mi pregunta es ; puede hacerme ese swap y q lleve aire acondicionado? Gracias Boricua pero recidente en norte carolina

[@dgreene1222]

Brand block guard?

[@THE4DOORTURBO]

What ecu u guys running ND is a d15 capable of running what u guys do

[@humbleperformance]

Eddie Mercado - #HONDATA

[@THE4DOORTURBO]

I'm sorry one more question where do you recommend getting one I don't trust my area

[@gilbertsantiago2921]

Donde están ustedes ubicados ? Yo estoy en Raleigh Nc y recién compre Nc civic ex d16y8 motor virgen !! Y quisiera q tener mas hp ! Y quisiera llegarles no importa donde my frend

[@olehimeipealoaloipeimeoleh5556]

I like single cam engine..is so powerfull...your crx very nice car.i liked.

[@mukmukker2421]

We're can I get a single cam head for a 7AFE please?

[@gedrickvargas7098]

What fuel are you using?

[@triniwarrior16]

Can you list the full list of what we need please next video

[@anthonysoto465]

What block guard is that?

[@jonathanpower5901]

What turbo kit was it?

[@boostliobarbell8024]

Is this on a stock sleeve to?

[@humbleperformance]

Boostlio Roman - Stock Sleeves. NO CSS

[@donwoods9784]

What fuel was used?

[@gilbertsantiago2921]

Hey were is your shop?

[@mikesampedro1892]

Que trasmision tiene eso

[@xQsalan]

what transmission is he running ??

[@AngelCruz-zu6ob]

PR puñeta....🇵🇷🇵🇷🇵🇷.. bicho para el que no le de like

[@MrSiDeWaYs240]

Sick !

[@danshim2644]

What does it rev tooooooo?

[@richardbossman9875]

500 hp in a crx must be insane on the street.

[@jeeperscreepers8677]

I have a case in front and loader I have a problem putting in gear I won’t go forward and reverse those wheels are locked out of anybody out there can help me out was probably appreciate it more now

[@olehimeipealoaloipeimeoleh5556]

I am from malaysian.i have honda crx...d16z6 engine.upgrade crankshaf d17A2.hingcam and high com pisten..so powerfull..

[@rudyguillen7801]

What do u have done to it

[@mrpsd590]

Hey.. the um wing on that eg.. I don't think it's big enough

[@picucavtec6335]

Los puertorriqueños lo hacemos mejor!!!. Adelante muchachos ya quiero ver vídeos cuando lo refresque y cuanto le sacan.. la gente se equivoca con los motores serie D.

[@Alxrez]

Pr is trash

[@picucavtec6335]

Alxrez nigga!! Where u come from?? Fastest cars are from P.R 🇵🇷🇵🇷🇵🇷

[@GLo1991]

Humble up bro your not representing us well..

[@nickferraina9860]

On the next episode could you do a 5 minute break down what’s the preferred crank. or what to do for proper oiling if you stay obd2. I want to build the most reliable Frankenstein out of a d16y7 w/ css. Z6 crank/Head or stay y8.

[@Elpoyoloco1]

Engine is d16z6 or??

[@drsvenoo]

Did the p2p0 rods need a notch ?

[@HunterTuned]

they do not need notch

[@humbleperformance]

Yes they do. There are no-notch rods on the market, but this car does not use them.

[@HunterTuned]

I built a z6 a few months back with these and no notch was required. Have videos on my channel of it

[@drsvenoo]

I saw your video but this is why I don't know some people have to notch and some just throw them in without doing any thing

[@nealfrazier7742]

Which skunk2 cam?

[@da9ej1eg99]

What's the setup

[@abbas674]

Is this.motor still runing

[@humbleperformance]

Yes.

[@turejdmzcdohc4801]

you should the main bearings so you don't lose oil pressure on those

[@MELLOOWMEX]

What about a 1.5L vtec jdm motor?

[@NATsector]

Huyyy... PR en la casa.

[@CPMotors814]

I the single cam 🤙🏻

[@SeaNBlack]

I have a D16Z6 300hp stock head stock cam 20psi