Рет қаралды 32,182
Who wants a mid travel system that will increase travel, wheel bearing strength, bigger brakes, stronger CV's, and wider stance, and more lift for about $500-$750?
This only would fit 4wd or Z71 2wd/4wd frames WITHOUT A BRACKET LIFT. Brake rotors are 12.5" diameter... 0.75" larger than the big Colorado brakes. Hubs are the size of chevy 1/2 ton hubs. CV axle outer joint size increases and is 33 spline at the hub. Also allows for use of RCV joints.
Stance widens 2.5" per side. Due to the longer A-arms, a torsion bar crank should obtain more lift.
Using the following parts:
Hummer H3:
Upper & lower A-arms
Lower control arm rear bolts
Spindle/knuckle
Hubs
Brakes
CV axles
Shocks
Sway bar & links (redrill and tap frame or use Badland swaybar adapter plates, or run no sway bar)
Late model H3 inner & outer tie rods for late 2006+ Colorado
2wd non z71 inner tie rod with H3 outer tie rod for 2004- early 2006 Colorado.
If you need new caliper bracket bolts, don't buy from GM, they are crazy expensive. 2005+ Nissan Frontier Caliper bolts should work: Dorman P/N 14991
It looks like RockAuto shows 2 different options for H3 front brake hoses pairs. 1 pair with m10-1.5 thread and one pair with m10-1.0 thread. You want m10-1.0. ACDelco Part numbers 18J4895 & 18J383271 Or equivalent. They are about 3 inches longer than Colorado hoses.
If your search on EBay for "hummer H3 knee assembly" it should bring up the upper and lower arms and the spindle knuckle. It may be cheaper to buy everything individually used though.
Hope you enjoy!
- Nick McPherson