The Tires Weigh More Than The Truck (F250 Frame Snaps In Half)

Like this video if you want to see this tire setup done on an even more capable truck🧐🤔

[@Hisdudeness101]

Those welds, though they looked magnificent, held up better then I imagined they would!

[@TheOneAlaskanRedOktober]

When you wonder if your axle is strong enough for a set of 54s, then you find out it's strong enough for a set of eight 54s. LOL

[@JuarezDerrick]

That's 4 sets

[@hunterlong1820]

@@JuarezDerrick yes a set of 8 is 4 sets

[@spambeanie2]

That doesn't matter only time it would matter if your axles are strong enough to handle is if you were under a load trying to pull or do a big burnout creating excessive twisting force from the motor and the excessive inertial weight that you have to overcome

[@michelletodd814]

@@JuarezDerrick t

[@shatteredreality1987]

​​@@JuarezDerrick'm pretty sure that is what he meant!! Or he could have meant eight "not" sets of 1 lol. But yes you are absolutely correct, only 4 sets on that ride definitely would be crazy to see 8 sets on the rear. 16 tires that would not only be expensive AF but insanely crazy as well!!

[@mountainman1796]

This was awesome.. I would of been curious what it could of done with just one tire on each side. Total A for effort lol

[@michaelharris1843]

I'm kinda hoping for a legit rebuild with this setup.

[@todddenio3200]

That hammered out half dead engine proved tougher than expected and for some reason it still lives. Looking at the frame and how it was put back together when it was narrowed it was surprising that it held up as long as it did. That rearend surviving as well as it did however especially with the bouncing and flexing was the biggest surprise of all. Other than the purely insufficient framework that was done to connect it back together, that truck has given me an appreciation for the advertising slogan Built Ford Tough…..because that thing proved that it WAS tough. It would be interesting to see how it would have done if the frame had been welded and braced properly and had a good running engine in it. Goodbye Chevrolet truck…you were just blown away by a ratty old Ford.

[@jearlblah5169]

im sorry but "built ford tough" is BS in my opinion. We bought a brand new RV with a ford motor home chasis. Didn't even get home (legit within the first 24 hours of owning it) and the rear axel seized up and snapped the driveshaft and pogosticked the RV, shoved the axel out of place, all because ford forgot to put oil in the rear axel.

[@leifswalling3226]

Isn’t the motor an international and the axle built by Dana? 😂

[@todddenio3200]

@@leifswalling3226 yes it is an International engine and as far as I know they are Dana axles

[@pdottrapz7205]

@@jearlblah5169 newer fords are known to seize especially the rear axle my buddy bought a 2020 Ford F-150 lariat ecoboost and maybe had it for a few weeks N the rear axle N diff seized at 60mph while hauling 1500 pounds of scrap

[@gullreefclub]

It’s hard to kill an IDI. Seriously have you ever seen what Peg from Zip Ties and Bias Ply’s has done to one and the dam things still keep coming back for more abuse and all the ether they can huff

[@oliva74]

my god this was entertaining to watch. love to see what you and Dave spark could come up and make work just see how insane it be

[@sweetotb8301]

"what did you do today hunny" "oh the usual just went down to the mud pits and RIPPED a car in half"

[@jamesrussell6870]

Considering you lost the strength of the continuous frame, cobbled connection held up impressively well !!

[@mitchellsavage6933]

well hunter another great video. i love how your brain works i would love to come build something with you one day. great work on the video my dude.

[@Thom1973]

Hey Hunter you should be very impressed at how well your welds held up at 17:28

[@Treesusb]

In 5 years hunter will be building the absolute beasts toys of KZbin! I can see it now.

[@Jammer.1]

Damn Hunter if i was 40 years younger i'd love hanging with you ! That is crazy idea stuff like i used do clear into my early 40's & i'm 63 now & tamed down a bit !

[@markbrown6236]

Those are some great axles. Threaded rod was also awesome.

[@JPLowery918]

This could be called the next SnapDragon

[@markholub97]

That truck actually looks cool with just one set of the bigger tires in the back. 🤣

[@daren2154]

Girls take note 👀 this kinda stuff is what we're thinking when you ask us what we're thinking 😂

[@FARMER_LUKE01]

and to think he does all that work to entertain us!!

[@morashid052]

Madness what you do bro love your videos keep bringing them out, absolutely love your builds

[@ifster7273]

You are a mad man. Love it. Would have been easier to make some 8" wide wheel spacers. And should have balanced those tires, would have done wonders for the ride quality.

[@Quackerstacker1973]

Several year's ago my buddy bearyied his 74 Ford f 150 with 40 inch groundhogs in that pond right next to that tree it took 4 trucks to gat him out

[@bigjay6743]

I think 2 tires would have been more than enough🤜💥🤛

[@davidwalker8360]

So sick Heavy D let’s you use all his stuff cause I was wondering how you were gonna drive that thing thru the streets to where you were off roading. Sick build tho!!

[@blaise2628]

I picture a single 54" on the rear and using front wheel drive to go for a rip? ;)

[@carlaswildride]

You got that Carolina squat down ...

[@makeitwork583]

Great video! I’m new here, but I’m sticking around after that. Great energy, work ethic and sense of creative adventure! Be well.

[@mikefurr5281]

kudos to the ready rod!

[@scioli700]

Whistlin Hunter?

[@HickSquatch]

Too much fun!! I dig the look with the singles on the back!

[@thebettersplat]

That was such a nice truck :(

[@zackshepard1414]

You always build the coolest stuff! I’d love to come out and help you out with a build one weekend!!

[@terrykuehn2686]

Hey Hunter Goodrich! That was a classic! I didn't think the wheels and axles would make it off the trailer in one piece Bro? That was awesome to see it put together and make it as far as it did to Funny Great job on it you and the guys Great content and vids it would of been nice to see it as a dually first but I get your too the Extreme side!🤔😉👍📹✔️💯👋👋👋👋👋

[@msnapp169]

Should have bolted each wheel as you added it would have squeezed the tires together more

[@jimmycline4778]

This super dually truck blows away Whistlen Dixies dually truck !

[@metalmafiachris]

Cab was safe, Until the frame broke. 😆

[@hotpeppaman]

I would have just flipped the spring mounts. Drivers side on inside of frame on passengers side and passengers side on drivers side. Box the frame where the spring mounts meet and DONE!!! ….maybe next time brother.

[@LeonardHickey]

says alot for the strength of a sterling 10.25

[@jmiller1717]

Make it into a reverse Tricycle!

[@austinsmith1815]

Love it lmao these videos are awesome

[@devakolb8045]

Hunter, you have come a long ways since Tonka Toys.

[@BrianW2979]

I kinda wanted to see you drive the front half of the truck onto the trailer with front wheel drive.

[@brettmorton7365]

Looks like the 5ton is lifting a biiig dumbbell... that just won't break!!

[@wesman7837]

Wow did you even attempt to square, or straighten the frame?

[@chrislpauli7048]

Wow that axle is ford tough

[@petermackay8981]

OMG with the earthquake certified camera work I think I'm gonna barf. Interesting project but not enough Gravol available watch it all.

[@badassbrian11]

Bro......😮 That is Sick AF

[@bisket2003]

This whole video is a giant LOLz.

[@OzzyGinga]

Hey mate ginger from mister I look up to you

[@OzzyGinga]

Crocs destroy gators

[@ermotron]

cool squat(your friend WD)

[@aronlauritsen8325]

Some dolly wheels on the corners of the cab please,...varroom twirl a whirl

[@Joe___R]

If you wanted to kill a truck you shouldn't have bought a Ford. Seeing that red velvet interior takes me back, nothing like a 1990s ford interior.

[@blanknone5408]

Wow, what a good idea. Maybe next time use 10 tyres.

[@KarlNespas]

Call this monstrosity RADIAL X. Folks will, all of a sudden, want to own one. karlnespas aka EG23 aka IE23

[@shawncosgrove3011]

You’re the coolest one in the diesel group

[@DougGleich]

You need a helper for all these “last minute” creations and projects bro, I’m sure you have a like minded buddy in Utah itching to run a plasma!

[@bobbywilliams627]

Whistling diesel wanna be!! this is so old come up with something you’re own stop mooching! Make something original

[@jeffreygarrett8050]

I can't believe you didn't try to drive it around with just the front end

[@aaronhamerman6797]

If the ol obs is 4x4 build 2 sleds on the frame in the back and do another video front wheel drive only

[@markschlemeil1219]

Love it!

[@rajgill7576]

Lol thumbnail looked like a video game

[@Danifrcupra]

Buen video. Un saludo desde Zaragoza, España

[@KARTEL2238]

HOW MONSTER MAX THREE START EXECPT ITS A FOR SO MAYBE MONSTER BIG FOOT?

[@handyandy345]

Love your content.

[@seekingelevationalways3502]

Man people be having way to much money aye bra let me get on your show 😂

[@CMDAVISs]

im mean just the single set on the back was awsome ... id of left it like that and drove it.

[@potato21206]

Leave the hett on cinder blocks and see how heavy d reacts

[@stevebeydler7589]

That's cool!

[@warrenfloyd1484]

Insane 🤣👍

[@mikebell7721]

Why because we can lmao 🤣

[@simplypony4108]

Today we will Mount 54”s With Zip Ties!

[@wastirator]

Dude playin beamng irl.

[@khcopter]

I know one thing for sure no one and I mean no one has done that before!!

[@technerdy]

i think i like dave even more that he lets you pull the tires off the wrecker for science lol

[@nickestanislao8961]

Insane build that it's not design for these big tires

[@GummyMann]

and that's why people put f250 axles on there jeep

[@3949zxcvbnm]

instead of trying just 2 or 3 extra wheels on each side first... hell naaa we need the Limit

[@mikeznel6048]

How about some walking mounts between the tires that let them walk higher or lower than the tire next to it while keeping the same center line so they drive in conjunction with the other tires? It’ll take the flex off the axle and look really, really awesome.

[@patriotmob3227]

Get a cut off from an Semi truck and weld it on the back that would be bad ass.

[@stntmn99]

I was hoping you'd try driving the cab around with nothing out back.

[@paulhare662]

The other truck retard has already done that one.

[@kerrylewis2581]

Unique and crazy. Keep the great content coming Hunter!

[@johndipietrantonio3701]

engineering 101

[@trickyhickey69]

You’re doing Gods work brother 🙏

[@cjphillips6648]

A dumb idea,& that isn’t a tractor…

[@Vyrex]

Now you just need to add an axle and some tires to the end of the cab to make it a short truck

[@rakal352]

Crazy Crazy The all thread held up better than I expected. Enjoyed watching!

[@danielwest8171]

We need a @whistlindiesel collab 😂

[@fluffypuff4394]

It's amazing how tough these trucks are, we have a 92 F250 460. Neat seeing these modifications and the truck just keeps on running.

[@masterbond9]

i can only imagine the conversation that happened, both if hunter asked Heavy D about this or not

[@connellybrown4998]

Great content!! Keep it up!👍🏻

[@EricReding7]

This was a fantastic video

[@boypisonetpisonet981]

Ford does make some strong axles

[@steven.h0629]

Pretty impressed with that Allthread..

[@falconpunch610]

what kinda of truck is the hut

[@lisawilson4551]

Omg is there anything you can’t think of lol, wait. I’ll send the other crazy mechanic from here what you can’t think of he will. Better order a pacemaker for Heavy D. Too fun lol 😂😂😂😂😂😂😂❤️❤️❤️❤️❤️❤️

[@p.youhana3563]

Once someone on KZbin dose how many tires can this trk handle the rest will be +2 wtf

[@bosshoss69lee]

You literally designed that frame to break, you made the frame weld a pivot point, holy crap I assumed you boxed the top and bottom and braced the pipe to the frame but no. Shame on your helpers for not calling you out before you loaded it on the trailer. "yOuRe a UtUbe kEYboaRd WelDer" Sure at least I know C frames are designed to be C's for a reason. (the reason is strength)

[@paulsmith6616]

For a gifted engineer this is ?? I respect your skills and ability to solve problems, however, uumm, perhaps a project that causes less brain pain...... Fun? aww c'mon ...... be our champion not the town fool and please lose the Japanese riding/safety boots.

[@scottwright388]

A buddy of mine years ago had a mid 80's 2wd nissan pickup, that he was driving around without a bed on it. I had an 82 datsun 4x4 with an extra set of 33's, so I suggested mounting two of them on the rear end. That thing looked so cool all jacked up in the rear, and he actually drove it for quite a while like that because it looked so outrageous.

[@dalemasyk1583]

hunter that was fckin AWSOME N FUNNY AS HELL TOO , you crazy bastard lol ...back to the drawin board 🤔😎

[@patrickulju583]

Pure idiocy at its finest. Loved it! 💙🤣 Great episode.

[@timothinking9855]

Fact that Dave let's you play like this. I get it though, all you're doing is practicing your craft so that you're only that much better when he needs you.. You're living the dream.

[@AntiPattern328]

Spacers is easier than moving the frame. Or even just flip the brackets around the other way. Put a flat piece of steel / box the frame and put the brackets on the inside. Don't even need to remove the leaf springs!! Lol!

[@Inlinetodie]

Ahhh FFS...you beat me to it...sure am glad to see it actually working 💪