"Huskvarna" 272xp Stocker vs ZIPPED 272XP

So here we take a looksee at the differential between a completely stock 272xp and a low hour Psy-Ko Zippkitted 268 converted , via an OEM 52mm bore topend assembly, to the same 72.2 cc - 52mm Bore x 34mm stroke.
The used 272xp is bone stock but not really clapped out. Pretty good compression with the starter rope method of checking.
Showing, "kind of", a differential between a 272 in factory trim, a Zipped 272xp, and then the Zipped 272xp sporting a K&N with a nice velocity stack.
Yes, there was an OOOPPPPs on my part. The 272s were factory rated @5.2 HP not the 5.4HP I errantly stated - thinking about the 50mm bore 372s there - My apologizes.
Regardless, the Zipped 272xp runs much better than the stocker with the HD filter system and runs even better yet with the K&N.
Timed runs as follows:
Bone Stock 272xp running ~ 13,080 and struggling 13.03 down and 12.62 up
Zipped 272xp with HD filter ~ 13,680 still missing 10.17 down and 10.01 up
Zipped 272xp with K&N/stack running ~ 13,500 went 9.78 down and 8.78 up
I am well pleased with the 268/272 hybrid's showing here.
It's important to note that the 268/272 has new seals as well as a new topend assembly. It doesn't have a lot of run time on it and performs a little better each time I use it.
Tuned with the Psy-Ko zippkit work a work saw application but it doesn't have my Patented "Torque Tweak" installed.
As stated, the 272xp may or may not be available. It will take a communiqué.
I'm currently available for custom saw modifications. If you are interested, please shoot me an email.
[e-mail]
Thanks for watching.

[@chuck805]

Wow I didn't expect the addition 2the k&n to make that much improvement! Thanks for the videos Jack, be safe.

[@CATES2211]

This video helped me determine whether or not my 272 was ported or not, and I believe it is! Thanks for the video, Jack, as always your content is is a must watch.

[@topchoppers7980]

Just pull the muffler off and look in the exhaust port you should be well able to tell if any grinding/i.e. port work has be done, and agreed his vids are must watch among a few other saw porters out there

[@jacobmitzkus2530]

Very nice, amazing the difference a little fresh air makes...I can relate to that.

[@TrunkstoStumpsLLC]

So weird. I was just watching videos on 272xp’s yesterday because I was looking into buying two older ones. Thanks for the video!

[@speedandmarine9066]

It's amazing to have 2 nice 272's in one spot at the same time! It's a constant battle on anything that isn't competition related between good low restriction air flow and good filtration.

[@patrickallred850]

My question was answered!! Thanks for showing a zipped 272xp brother! She’s a ripper for sure 👌🏼

[@woos31]

That was interesting seeing the changes on video between the two whilst the filter change as well. I 'need' something else to occupy my time like another hole in the head, but I want one of those oober nutsoide 461 builds like somethin fierce lol. Keep up the good work Jack and you guys stay healthy over there in the northeast pard

[@Houseworksaws]

This is great because I’m having a velocity stack being made for my 372xp. I did the RWJ4 carb swap onto a pre x-torq that I ported and so far I’m extremely happy with the swap. I can’t believe the difference in throttle response and it’s not all from the port work I just find it to be snappier. Anyways great work on that 272 they were/are fabulous saws

[@timberray9572]

Years ago I was lucky enough to buy a very lightly used 272 XP, I love running it just the way it is. Here in Manitoba Canada a tree that's three feet at the stump is pretty big.

[@dustinaustinson2511]

Where you from I’m from south eastern Manitoba “sprague” right by the Minnesota border and your not lying there it’s few and far between

[@Sensei948]

@@dustinaustinson2511 13500 ? Rpm

[@dustinaustinson2511]

@@Sensei948 depends how much you lean it out

[@Sensei948]

@@dustinaustinson2511 ?

[@jonathanbenoit8828]

Great saws love it ❤️❤️ super nice 👍👍👍👍👍

[@whiskeytangofoxtrot9403]

"Will mod 4 food" 👍 your saws could turn a tree hugger into a lumberjack

[@viorelscrob6391]

Very strong

[@billryan8721]

Amazing the difference the stack made. A great knukle dragger example why humans shouldn't smoke cigs.

[@pseudopetrus]

I will come by and tidy up, I need some fire wood! Thanks Jack!

[@hotsaws101]

pseudopetrus hi. LOL! Well, you might just have to arm wrestle my lovely bride for the firewood rights. I'm thinking that I'll spare you the embarrassment and say thanks for the offer, but... Thanks for watching.

[@pseudopetrus]

@@hotsaws101 No worries, I have 3 years worth of firewood put up and drying. I have a Stihl 026 that was my fathers, it would be approaching 28 years old and still going (after some serious rebuilds) and I have MS290 which is also useful.

[@dcvariousvids8082]

The zipped one seems to have a 2-3+ sec. better than the stock. Nice cutters!

[@topchoppers7980]

Absolutely awesome video my friend just bought a fair 272 so this video helps a lot, always a big thanks for taking the time to make videos for our viewing pleasure, I would really love to know where to get one of those KnN filters just looks so badass please and thanks and have a blessed day

[@hotsaws101]

Brett hi. They work in conjunction with a v-stack. So it's not just a "buy a filter and throw if on" affair. Thanks for watching.

[@topchoppers7980]

@@hotsaws101 may I email you for details on where to order these parts this 272 I just bought is kinda gonna be projectsaw thank you

[@redeagle6842]

The zipped/kn combo would be hard to beat.

[@holypokey47]

I’m gonna play a little with my 272. I don’t use it much for working since I bought a 372 a few years back but I’m enamored with the 2 series Husqvarnas

[@kennethfraser9006]

Awsome video man, do you have a code for the k&n filter I have a 268 and an after market top cover I wouldn't mind taking the Dremel too. 🤙

[@leonardvirtue5753]

Nice.😆 mate

[@cleitonalbuquerque4497]

Essa motosserra tei muita potência

[@Houseworksaws]

Love your vids.. I bought a 272xp and it has the OEM full wrap and I’m curious if they have a different chain brake handle?because the handle off my half wrap 272 doesn’t fit or maybe I’m crazy lol (possible for sure)

[@hotsaws101]

Matt hi. Good News, your not crazy! The main tube on the wrap handle sits a fuzz further forward than the ½ wrap version. At the same time, the brake handle/lever on the ½ wrap saw is a bit shorter. Running the ½ version chain brake cover with shorty lever can be done but it is slightly "congested as you have surely found. I am possibly interested in the cylinder cover. Please shoot me an email. Thanks for watching.

[@kennethstephens8046]

Are there any hi flow filters that fit under the hd cover? I ask just because I’d hate to damage something with the filter in the open. I just picked up a 272 and am using it with a 20in bar to chunk out wood when climbing. Thanks for the killer content. God bless you. Can’t wait to see what you do with the 592 or whatever they decide is the next husky. Or an 881.

[@hotsaws101]

Kenneth hi. There is an oem HD element that came on the middle to late vintage 272xp saws. They fit "under the hood". I have not looked for an oem version HD in a long time. You might need the filter base that goes with the HD element since it is different than the early version unit. K&N use to make one that worked as well. I like the V-Stack with the cone. Not a rain (winter) type operation... It's a 592xp The middle weight version is a 585xp. Blessings to all in your camp also. Thanks for watching.

[@prescribedfire1953]

Would you expect the similar results with a high top 372XP? I have Max Flows on most of my Stihls but I would like to try a K&N on the 372.

[@Sensei948]

13500rpm max?

[@goldentrucker7921]

Nice cutting. My ported 461 runs like yours.

[@jasonbubley9427]

Where did you get the full wrap handlebar? Those saws rip dude.

[@hotsaws101]

Jason hi. The West Coast version saws came with them oem. I had it in the collection. Thanks for watching.

[@dcvariousvids8082]

The zipped on seems to have a 2+ sec. better than the stock.

[@Houseworksaws]

I have a really nice top cover for that too if your looking for one.. just figured I’d let ya know

[@steppoffaith8426]

Just wondering where you can find a 272 or even a 371xpor 372xpw

[@Sensei948]

13500 rpm Max ?

[@MitzvosGolem1]

Husq Varna means "House by the river" in Swedish.

[@lagoonrd4173]

Matt foley was in a “van down by the river.”

[@frankz1125]

Can you recommend a place to get a v stack for my 2 series saws/ Also check out my 61 build . Ill post a link down below. Cheers

[@kingslandmanagement3816]

What all is done to make a saw zipped?

[@Dechsi87]

Squish and base cut on the cylinder, intake/exhaust and transfer work, muffler work, carb work and maybe some extra special's like finger ports ;)

[@tjlovesrachel]

Dechsi87 watching alotta iron horse huh

[@Sethhaun78]

Merry Christmas..jack..praise the savoir Jesus christ alone..stay safe .boss

[@hotsaws101]

Merry Christmas to all in your camp as well. Amen.

[@Sethhaun78]

@@hotsaws101 lov ya..let me know when your available for work...hope you transitioned well..praise God..amen

[@farmnat4548]

Jack, How does a fella go about getting in touch with you? Thanks

[@hotsaws101]

Farm n'at hi. My email address is in the description of most of the videos over the last few years. Thanks for watching.

[@dan-dan-da-treeman]

I have to send you my 440...and...and....thanks Jack.

[@poorsalotto6108]

Man I wanna see you do a review on the Chinese 372 XP so far I have had one for 2 years now and I cut over 500 cords of wood not face cards I Cannot believe it $330 with the Saw and aftermarket light STIHL 28 it runs it with np I run a 20 bar it You save over $1000 I would love to see you rip one apart though

[@weskerlion3260]

Muito bom torq rpm chool parabns pelo video,.

[@hotsaws101]

Wesker leão oi. Não sei o que significa "chool prbns"? Obrigado por assistir.

[@weskerlion3260]

@@hotsaws101 eu disse que fico bom muito desempenho parabens pelo video gostei,.

[@garrettsharp7860]

What is the price of this saw if it’s available?

[@hotsaws101]

Garrett hi. I responded to you above.

[@oldmaninthewood6514]

To me the 272 is the best Saul Huska Bonna ever made a lot better than the 372

[@garrettsharp7860]

Can I send you my 272XP and have you do this to mine as well?

[@hotsaws101]

Garrett hi. My email address is in the description area. That is the best, first point of contact. The "base stock" here was pristine, I will say that. Thanks for watching.

[@jonathanbenoit8828]

Most people burn up a 2cycle less than a year,

[@jonathanbenoit8828]

Oil helps its life span

[@canadiancutterschannel6787]

Any higher than 13,500 and your asking for trouble

[@jonathanbenoit8828]

Needs more oil in the fuel should be smoke from the engine.