Husqvarna 236e brake band replacement

[@apistosig4173]

This, problems replacing the clutch cover, is "apparently" a common problem with new Husquvarna owners. Your little video shows how to solve this - thanks

[@tonyd6821]

QUESTION .... MY 326 CHAINSAW has some fuel trouble I installed a new carbu. and it starts and stops could be the inlet line is to small 3 .5 Diameter the carburettor people provided me with both fuel lines one yellow and one black ---the old one is yellow --outlet 4.5 di and must have been white one the inlet ---- BOTH THE NEW ONE ARE 4.5 diam. to fit the new one to the petrol tank I should drill the hole out bigger probably 4.5dia (mm) In doing this operation could create any problem to the carb or its ok ?

[@Psy6o]

Someone has been using a cutoff wheel on a angle grinder I see the gloves lol

[@jonastopfreitas1682]

Boas dicas ...parabéns...

[@Gregorynts]

You are welcome. I’m glad it helped.

[@tonyd6821]

I wonder if you could help me with some hints about my 326 chainsaw it starts then after a few moments it stops .

[@Gregorynts]

First Self help is to check the air filter, it may need a good clean. Next I would inspect the fuel lines. After that I would fiddle with the carburettor.

[@tonyd6821]

@@Gregorynts EIRST LET ME SAY THANK YOU FOR YOUR RIPLAY ....Now let me if can make myself understood ... I put a new air filter ,fuel lines seems to be Ok , the good sign is it started ....but I tried to tune up but it stays on high rev then it dies ....I don't know why the choke liver keeps going back when I pull it out ...also I noticed that from the bubble (?) hoses seems that there are some air bubbles in the houses ....Any help is very much appreciated Thank you for your time .

[@Gregorynts]

Thanks, I’m glad it helped.

[@PEDROaugustoPEDRO123]

Apoyando 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏

[@PEDROaugustoPEDRO123]

👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏

[@danieldesimonedanny1827]

I put the brake band in the trash. I know its a $$$ money maker for small engine gals & guys but please too much crap is no good for the reputation of the machine. I have many chain saws that are 30 years old + with no chain brake.

[@Psy6o]

Don't do it with a 70 plus cc saw it can be a deadly mistake I almost lost my arm an was close to bleeding to death and have ran saws for 30 years but freak accidents can happen a chain break would have saved me from it

[@rogeranderson3278]

Do you have a Go Fund me page? Looks like you are in dire need of a new pair of gloves..

[@Gregorynts]

I love wearing things down to the bare bones 😅until they are beyond repair.