This is a chain for homeowner saws, and as a homeowner in the Southeast who doesn't really count wood by the cord kzbin.infoUgkxbs4FIpzuLyOJe2SesfbtvXi1CTnUXroD I have this (or 20BPX) on several saws at different levels of smallness. I've never felt that the safety chain is holding me back. I buy multiple chains, and when the installed one doesn't feel grabby enough, I file it, then throw it in a cup of gasoline while I rotate to the next one. I have yet to file one down to the wear lines, so I feel like I'm getting my money's worth, and I'm happy about this new 3-pack - although, at this rate, it's going to be awhile before I buy another. I don't know why I would try anything else.
@jaredmalmend14894 жыл бұрын
I just spent 30 minutes screwing around with my cover when I should’ve just took three minutes to watch this video and get it done in 5 min.
@PilotViewProductions4 жыл бұрын
Thanks Jared. Glad you stopped by and that it helped.
@Dahita4 жыл бұрын
Just spent 2 hours and a bit of my hand's skin before this video. Lucky you!
@tubenow13 жыл бұрын
Just 3o minutes? I spent an hour trying to get my new chain back on, not realizing that this very thing is what happened to me when I tried to remove the cover! Thank you for the clear explanation and closeups. It took me 15 seconds to fix the brake system and now I'm heading back outside to replace the chain!
@brick23922 жыл бұрын
I spent about an hour lol
@tehillahchurchphilippines2 жыл бұрын
I really need a good video on carb tuning for this same model
@thomasstinson55194 жыл бұрын
Giving credit where credit is due here. I cannot actually describe how incredibly helpful this video was. After spending an hour of getting frustrated and going no where trying to figure out why I couldn’t get the clutch cover back on, this video helped me troubleshoot the issue within 5 minutes. Now my 440 rancher is back up and running thanks to this professional and very helpful video. Please make more sir!
@PilotViewProductions4 жыл бұрын
Thanks for watching Thomas and taking the time to leave such a complimentary comment. Hope all your projects are successful.
@sccowboy222016 күн бұрын
Same. I actually ordered a generic replacement cover and brake band which arrived uncocked also. Suggested maybe I was doing something wrong and maybe I should seek advice. Now I have two covers that work perfectly. Thank you
@jockwhisky110 күн бұрын
Finally someone offered a guide on this matter. Thank you
@seabuck592 жыл бұрын
Three years after this video was made and it saved my day trying to figure out why I couldn't get my chainsaw back together. Thank you...
@PilotViewProductions2 жыл бұрын
Time is relative David but I’m glad you found me. Dean
@ensporium8857 Жыл бұрын
Huge thanks!!!!
@MemoryCollective3 жыл бұрын
Same problem on my (smaller) Jonsered Saw. Wrench and screw driver didn't work... but having watched your explanation of how the brake works... I just pressed the cover in place... extended the brake lever until I felt a "snip", then holding the cover securely, leveraged the brake handle back to the open position. "Clunk!" The cover slipped down into the open band... and it was done! Thank you SO VERY MUCH!!!
@PilotViewProductions3 жыл бұрын
Excellent job glad it worked and thanks for commenting
@danbuell4924 жыл бұрын
Exactly what I was looking for, thank you sir.
@PilotViewProductions4 жыл бұрын
Glad I could help
@drey5alive4843 жыл бұрын
You ain't lying
@kenhunt52382 жыл бұрын
Very useful video, thank you!!
@PilotViewProductions2 жыл бұрын
@@kenhunt5238 Thanks Ken.
@PilotViewProductions Жыл бұрын
@@drey5alive484 Thanks Drey5
@Fenrir1332 жыл бұрын
This is the only video I could find of how the chain break works and how to reset in detail. Many thanks!
@PilotViewProductions2 жыл бұрын
Thank you Fenrir133 for watching, and for the kind comments. Got lots of other Husqvarna videos. Please consider subscribing. Dean
@leonarddill41444 жыл бұрын
The video on resetting the chainsaw brake was awesome. It was simple, to the point, and explained well. The gentleman that spoke is a great communicator.
@PilotViewProductions4 жыл бұрын
Thank you Leonard.
@craigstephens4318 Жыл бұрын
Just so happens that I have the same chainsaw (Rancher 455) and experienced the same problem. The brake engaged after the blade and chain got pinched while cutting up a tree. Couldn't get the brake to release, so I removed the brake/clutch cover and started troubleshooting -- then, couldn't get the cover back on because, unbeknownst to me, the brake was engaged. This video helped A LOT. Got my wrench, screwdriver, and went to work. You're correct that it takes a lot of leverage, but I got it done and reinstalled the cover. Thank you!!!!
@PilotViewProductions Жыл бұрын
Glad it worked and that you found me Craig. Dean
@mikeulrich5354 жыл бұрын
Thanks for this helpful hint, spent 30 minutes trying unsuccessfully to reseat the cover, until we found this.
@PilotViewProductions4 жыл бұрын
Thanks for taking the time to comment. Glad it helped.
@rainamaajid18343 жыл бұрын
@@PilotViewProductions trtrtrrtrtrrrtrtrtrrttrtrtrtrtrtrtrtr th ft
@robnamowicz80733 жыл бұрын
Thanks, just got the old girl running again, with your help. Thanks again.
@PilotViewProductions3 жыл бұрын
Hey Rob, that's great news!!! Come on back to my channel sometime. Maybe I got some other Husqvarna videos to help you. Dean
@s0cketman2474 жыл бұрын
Proffessional grade video sir. Very thorough, and well presented. Thank you, subscribed!
@PilotViewProductions4 жыл бұрын
Thank you Socketman!
@OyvindSOyvindS Жыл бұрын
Very helpful, very instructual. And very well edited.
@PilotViewProductions Жыл бұрын
Thanks for watching and for the kind comments. Dean
@ianbarber3113 жыл бұрын
You saved me from going down Aggravation Road. After 10 minutes I ended up here. Much appreciated Sir!
@PilotViewProductions3 жыл бұрын
Thanks for viewing and for taking the time to comment
@ianbarber3113 жыл бұрын
Checking out your videos to see what "fat I can put in my head". Old Army term for knowledge. Well done video quality-wise.
@PilotViewProductions2 жыл бұрын
@@ianbarber311 That's humorous Mr. Barber. My hope is for a fat head for the both of us. lol Appreciate your checking out my other videos too!! Dean
@Mike-su8si2 жыл бұрын
Yeah. I bet this one guys poulan pro one is broken from him giving me the saw in pieces I've already put it all back together an cut with it It does need a new seal and either clean the carburetor parts or get a new carburetor for it so i traded him my stihl for the poulan
@scottfreeland4197 Жыл бұрын
Absolutely the most helpful video I’ve seen on KZbin. Probably saved us from buying all new parts. Thank you!
@PilotViewProductions Жыл бұрын
Thanks for viewing Scott and for the kind words. Dean
@bradleybarker1634 жыл бұрын
Wish I would have watched your video weeks ago! Genius. Thank you!
@PilotViewProductions4 жыл бұрын
Thank you Bradley, I'm sorry you didn't find me sooner. Would you consider subscribing?
@bradleybarker1634 жыл бұрын
@@PilotViewProductions I am subscribed! Thanks
@PilotViewProductions4 жыл бұрын
Bradley Barker Thanks Mr Barker
@needaman662 ай бұрын
I took mine off years ago without any problem, but forgot. Been thinking about it for 3 days lol. This video saved my sanity. Thank you
@capulet61462 ай бұрын
4 years later and this video is still saving people. Thank you for such clear and concise instructions.
@PilotViewProductions2 ай бұрын
@@capulet6146 thank you very much. Those are some mighty kind words.
@TimLivsey8 ай бұрын
The video was great! Direct and to the point ! Saved me a second trip to the equipment shop after the clutch ring broke, I replaced it but couldn't reset it. Thank you
@PilotViewProductions8 ай бұрын
Thanks for watching. Consider subscribing for more Husky videos. Dean
@jamminshaman4444 жыл бұрын
Thanks, I'll remember to make sure brake is off before I take that cover off.
@g.d.76293 жыл бұрын
If not do just like he did. You dont have to turn far.about 1/8 turn maybe slightly more. But snaps in place
@cthompson76602 жыл бұрын
Thanks so much for you video.. I bought a reconditioned Husqvarna 440 and I did not realize that the chain brake got activated during shipment. I removed the chain brake to attach the bar and then could not reassemble. Your video saved the day.
@PilotViewProductions2 жыл бұрын
Thanks for watching and for the kind words. Glad it helped. Dean
@abushenob Жыл бұрын
Perfect- so clear. Up until now I have always taken the saw to a pro and paid to have it unlocked. I especially appreciate that it was not full of wasted chat or branding or let's-be-friends content. Smart, clear, straight to the point and completely businesslike. I really appreciated this.
@PilotViewProductions Жыл бұрын
Thanks Dan. Hope you check out my other Husky videos as well as other how-tos. Appreciate the kind comments. Dean
@SyedMehdiX2 жыл бұрын
Spent an hour trying to solve this issue on my 450. Thanks for the video!
@PilotViewProductions2 жыл бұрын
Thanks for watching Syed. Glad you found me. Dean
@axelschroeder9774 жыл бұрын
Hey man you are a lifesaver, this was the perfect video. Keep making the quality content👍🏼👍🏼
@PilotViewProductions4 жыл бұрын
Thanks Axel. I’m glad it helped.
@michaelmangrum546011 ай бұрын
Top notch video. Excellent instructions and you didn't make us listen to or watch a bunch of nonsense. I got my saw back together and finished working before it rained. Thanks so much.
@PilotViewProductions11 ай бұрын
Appreciate the comments and thanks for watching
@MrFuchew3 жыл бұрын
Just saved me with this one i was getting seriously pissed off trying to put that cover back on
@PilotViewProductions3 жыл бұрын
Glad it helped. Thanks for commenting.
@the_wingman2 жыл бұрын
Had to make a repair in the field with minimal tools available and this video saved me a lot of trouble.
@PilotViewProductions2 жыл бұрын
Excellent Stephen! Glad it helped. Dean
@magicmike9004 Жыл бұрын
Thank you so much for taking the time to make this video. I was losing my mind trying to figure out the problem and decided to look on KZbin. I like the fact that you submitted two different ways of fixing it. Needless to say my chainsaw is back together and running great again. I am forever grateful.
@PilotViewProductions Жыл бұрын
Thanks for viewing and the kind comments MM. I’m glad the video helped. Dean
@nikolaykorsunsky695 Жыл бұрын
Thank you so very much! You shed the light in the dark where manual was afraid to go…
@PilotViewProductions Жыл бұрын
Thanks for viewing and the kind comments
@stevemclaughlin85172 жыл бұрын
Thank you! You're videos are fantastic! They are very clear and concise. I ran into this problem a few months ago, and if I would have watched this first, I woulda, shoulda, coulda saved a lot of time!
@PilotViewProductions2 жыл бұрын
Thanks for the kind words Steve, and for watching my videos. It means a lot. Dean
@tomransom6638 Жыл бұрын
This video was exactly what the doctor recommended. Solved my problem resetting the brake in just a couple minutes. Using a vice grip helped acted as a second pair of hands. Thanks!
@SeeMooreVids3 жыл бұрын
You just saved two neighbors from probable disaster. That load spring is so stiff, and attempting to turn the three armed spiny thing with needle nose pliers was taking us over the edge. We used your expertise and had it done in 3 seconds. Thanks.
@PilotViewProductions3 жыл бұрын
Thank you for viewing and for the encouragement. I’m so glad it worked.
@davidfreeman80792 жыл бұрын
Man I struggled with this thing till I found your video. Thanks!
@PilotViewProductions2 жыл бұрын
Thanks for watching David. Hope you’ll subscribe and check out my other Husky videos amongst others. Dean
@headmasterjeffshaw14684 жыл бұрын
Thank you so much, Dean. Saved me a load of money and a couple of weeks without the chainsaw. Appreciate the quality of the instructions.
@PilotViewProductions4 жыл бұрын
Appreciate the kind words Mr Shaw
@anthonywillet2225 ай бұрын
Thank you so much !! I’m new to the chainsaw world and this video saved the day and I was able to accomplish my task helping out an elderly neighbor!!!! You guys are the best ! Oh, I LOVE MY SAW !
@PilotViewProductions5 ай бұрын
Glad I could help!
@philipturturro4 жыл бұрын
Thank you so much!! You just saved me a $50 charge at the local mower shop!!
@PilotViewProductions4 жыл бұрын
That’s my goal. Thanks for taking the time to comment.
@g.d.76293 жыл бұрын
They wanted $50. I wudnt give them any business at all.
@ezedgerider3 жыл бұрын
This was one of the best produced videos to trouble-shoot a problem that left me so frustrated mid-stream cleaning up property. I've had the clutch cover off numerous times, never before experienced this issue with the brake needing to be reset. Problem solved in less than 5 minutes! Thank you so much!
@PilotViewProductions3 жыл бұрын
Man, I'm glad it helped Mr. Schiff. Nothing more frustrating that needing to get the job done, but you're stuck because of something like this. Glad it helped and thanks for commenting.
@AdvancedBuildingSystems4 жыл бұрын
Thanks for the video! Now, I can get back to work. Husqvarna owes you big time for me coming this close to going out to buy 2 more chainsaws to replace the 455's.
@PilotViewProductions4 жыл бұрын
I really appreciate the words of encouragement sir.
@nicholasschneider2056 Жыл бұрын
This made me able to walk inside and fix it within a few minutes! My thanks.
@PilotViewProductions Жыл бұрын
Sure thing Nicholas. Glad you found me and hope you subscribe for more of my Husky videos. Dean
@paulwilson90574 жыл бұрын
Thank you for a great, professional video! This issue was giving me a lot of problems and this video was a simple fix! Also, love Pilot Mountain! Thanks again!
@PilotViewProductions4 жыл бұрын
Thanks for taking the time to comment Mr. Wilson. How do you know Pilot Mountain?
@jonathandriggs73162 жыл бұрын
Thank you so much for this video. I borrowed a neighbors chainsaw today and it locked up. Among other things we couldn’t figure out why we couldn’t get the cover back on, and your video not only solved the mystery but provided the fix. Much appreciated!
@PilotViewProductions2 жыл бұрын
Hey thanks for checking in Jonathan. Glad it helped and much success. Dean
@TheTrudeman4 жыл бұрын
Thanks. I wondered why the cover wouldn’t fit; so I ran in the house and called up your video. Yours are the best.
@PilotViewProductions4 жыл бұрын
Thanks for taking the time to comment
@zuppagraves29453 жыл бұрын
Thank God for this video, thanks. I spent 1/2 hour trying to re-set the brake.
@PilotViewProductions3 жыл бұрын
I’m glad it helped and thanks for commenting. Hope you can subscribe. Have a great weekend.
@goobtubers8852 Жыл бұрын
Thank you for making this video! After an hour of trying to reset it I was about to buy a new break altogether.
@PilotViewProductions Жыл бұрын
Thanks for watching and commenting
@Scorpion6469 Жыл бұрын
So glad I found this video. I was on the right track to reset the brake but I can see using the combination wrench and a screwdriver will make the job much easier. Thank you.
@PilotViewProductions Жыл бұрын
I’m glad you found me as well. Hope I have other videos that help you. Dean
@stevesinghose2144 Жыл бұрын
Brilliant. Working in the woods this morning. It was raining. Saw quits. Many expletives. Well, let’s try KZbin. Back to work after this well done explanation and fix. And the sun came out. You are one powerful wizard. Thanks.
@PilotViewProductions Жыл бұрын
Lol. Can’t take credit for the sunshine Steve, but I’m glad you found me. I’ve been known to cut loose a few expletives myself when dealing with chainsaws. Dean
@johnegan65792 ай бұрын
Thank you.Great video, fixed my brake easily after watching this. I owe you a beer if you ever come to Australia 😊
@PilotViewProductions2 ай бұрын
@@johnegan6579 Thanks mate.
@keithridlen71223 жыл бұрын
Saved me from at least an hour of swearing & tinkering - thank you sir!!
@PilotViewProductions3 жыл бұрын
I can relate Keith. Hey, thanks for stopping by. Hope you find some other videos of mine that help. Cheers. Dean
@3OCALM13 жыл бұрын
This video was very helpful for me today with my new Husqvarna 440.
@PilotViewProductions3 жыл бұрын
I'm glad. Thanks for commenting. Please consider subscribing.
@steveroberts9282 Жыл бұрын
Had a great day with my chainsaw today thanks to you. Also $100 richer since the Husky video told me to take it to the dealer.
@stevefoster76038 ай бұрын
Dana I saw your video &it helped me quite a bit. I noticed pilot mountain in the background. We're practically neighbors. I live on the Dan River &was having trouble with my chain saw when I saw your site.
@PilotViewProductions8 ай бұрын
Glad you found me Steve. Yeah my videos’ subject matter are all over the place. I have several on the Husqvarna. Hope you can subscribe and that they help you. Good to meet you neighbor. I grew up in Stokes County near the Dan.
@stevefoster76038 ай бұрын
OK Dana,I ll subscribe.
@jameswells9011 Жыл бұрын
Thank you for this video! It saved me time and $. I was about to take the saw to a shop.
@Cnrmc Жыл бұрын
Thanks so much saved me 4 hr round trip into town 👍
@PilotViewProductions Жыл бұрын
Glad you found me. Thanks for viewing. Dean
@josephnjessica2 жыл бұрын
Thank you sir for your knowledge. I was back and running in about 10 minutes.
@PilotViewProductions2 жыл бұрын
Thanks for viewing Joseph. Hopefully, I have more videos to help you. Please honor me with your subscription and I'll try not to disappoint. Dean
@imin2day2 жыл бұрын
Thank you!!! saved me a trip to the dealer. very good
@PilotViewProductions2 жыл бұрын
Thanks for viewing James. Trust I can ask for your subscribing for upcoming videos. Dean
@AustinTillison3 жыл бұрын
Thank you so much! You just helped me get my chainsaw back up and running after I thought I was gonna have to take it into the shop. You're a savior!
@PilotViewProductions3 жыл бұрын
Thanks for taking the time to login and comment. It means a lot.
@nabillayoun39732 жыл бұрын
I just subscribed it thank you I was frustrated I knew that the break was on but I had no clue how to unlock it. It's late in the evening now I will do it tomorrow thank you so much again and God-bless you in Jesus name
@PilotViewProductions2 жыл бұрын
Thank you Nabil for viewing and for taking the time to comment....and for the blessing....and for subscribing.
@markiverson60044 жыл бұрын
Thanks for coming to the rescue! Excellent solution presented very well. Very appreciated!
@PilotViewProductions4 жыл бұрын
Mark Iverson Glad it helped you Mark. Thanks for the compliment.
@mosdephh2 ай бұрын
Thank you that was a great video. Explaining how a Hsq chain brake works in such an orderly way was perfect for me! Very nicely put together. It was an Interesting presentation-not at all boring! My Rancher 460 has exactly the same brake system I now need to figure out the easiest way to reinstall the chain without fighting it and then it’s not adjusted correctly but I know I’ll find plenty of vids on it✌🏼
@PilotViewProductions2 ай бұрын
@@mosdephh Thabks so much for viewing and the pleasant comments. Please consider subscribing to see more of my Husky videos.
@emeraldsprings34712 жыл бұрын
Thank you for sharing your knowledge! This is exactly what I needed to learn to fix the problem my ignorance caused.
@PilotViewProductions2 жыл бұрын
I’m glad it helped. Thanks for viewing
@gatehouse65932 жыл бұрын
Thank you...you just saved me a trip to the hardware store..lol. Was down in your area couple weeks ago at the car show.
@PilotViewProductions2 жыл бұрын
Hey, I'm glad you found me and that this video could help. Yeah, the car show is neat. Are you local? Please consider subscribing for lots more chainsaw/weedeater videos. Nice to meet you. Dean
@gatehouse65932 жыл бұрын
@@PilotViewProductions I just moved to Germanton about a month ago. Love this place!
@robertgaritano7718 Жыл бұрын
Excellent video . I popped mine back into place in no time.
@PilotViewProductions Жыл бұрын
Thanks for viewing
@secuervo3 жыл бұрын
This video was great. I was worried I would break the mechanism while resetting the chain brake spring, but it worked wonderfully. Thank you.
@PilotViewProductions3 жыл бұрын
Great news Stephen. Glad you found me and thanks for viewing.
@3OCALM13 жыл бұрын
This video was very helpful for me today with my new Husqvarna 440.
@armedveteran424 жыл бұрын
Thank you so much this was exactly what the problem was for me. I got a 440e powerhead for 179 like new dude used it for 2 hours broke the bar and returned it the same day. I picked up a bar and chain and couldn't for the life of me to get it to work. I watched this video after watching one to ensure I put the chain on proper(only experience with echo, chains go on the same way lol) this popped up right behind it and I'll happy as clam in mud that I got a brand new 440e for less than $230
@PilotViewProductions4 жыл бұрын
Great job Eddie. Thanks for taking the time to leave a comment and enjoy your saw.
@jeannetet37624 жыл бұрын
Thank you very much, you rescued us! Your video is easy to understand and very helpful.
@PilotViewProductions4 жыл бұрын
Thanks for taking the time to log in and comment. I'm glad the video helped.
@soulmageseer2 жыл бұрын
Just what I needed to know thanks This is an easy to follow how to clip, thanks again 👍
@PilotViewProductions2 жыл бұрын
Thanks for watching Reece. Dean
@hopeisa4letterword Жыл бұрын
Fantastic, simple video. Thank you so much!
@PilotViewProductions Жыл бұрын
Appreciate it. Thanks for watching Alex. Dean
@ChartsCantLie2 жыл бұрын
Thank you from Wilkes County 🙏
@PilotViewProductions2 жыл бұрын
Howdy neighbor and thanks for viewing. Hope you’ll subscribe. Got lots more Husky videos
@MrGalenlcox Жыл бұрын
Knew there was a trick how to do that. Thanks a lot for the video!!
@istevenson17179 ай бұрын
This was excellent! Exactly what I needed! Thank you so much!
@PilotViewProductions9 ай бұрын
Thanks for viewing and commenting
@MonkMasterFlex3 жыл бұрын
Thank you so much. Was really struggling with this. Took mine completely apart, and becaues of such hard tension from the spring it was very difficult to get it back in. Perfect video and thanks again.
@PilotViewProductions3 жыл бұрын
Thanks for commenting Mr. Sherwood
@fullthrottle21124 жыл бұрын
All I can say is Thank You. You just saved me some cash.
@PilotViewProductions4 жыл бұрын
Glad to hear it and thanks for leaving a comment
@davidpaget3189 Жыл бұрын
great explanation!!! now i know what i was doing wrong
@kennkid9912 Жыл бұрын
I have had this happen a couple of times. Took it to the saw guy. No charge, but he does lecture and laugh a lot about it. The shame...Now I know Thanks.
@PilotViewProductions Жыл бұрын
Thanks for viewing Kenn.
@glennclute73252 жыл бұрын
Thank You!! Problem had been driving me nuts.
@PilotViewProductions2 жыл бұрын
Thanks for viewing Glenn and for the kind comments. Hope you subscribe to my channel. Dean
@lonewolf58964 күн бұрын
I did the same bloody thing! Thanks, bro, you saved my arse... Cheers!
@bowskif833 жыл бұрын
Thank you so much! This is exactly what I needed!
@PilotViewProductions3 жыл бұрын
That's good news Mr. Davis. Glad you stopped by. Feel free to check my other videos for any other help they may afford. Dean
@starbrickvideos76033 жыл бұрын
Thanks. This video really helped me out to fix my chainsaw.
@PilotViewProductions3 жыл бұрын
Thanks for viewing and leaving a comment. Glad it helped .
@petercaptain21693 жыл бұрын
Fantastic video...just what I needed....thank you very much...!
@PilotViewProductions3 жыл бұрын
Excellent. Glad it helped sir.
@fastwest4333 жыл бұрын
Very informative! Thanks for the easy fix! Great videos!!!!
@PilotViewProductions3 жыл бұрын
Thanks for taking the time to comment.
@aaroncrawford1600 Жыл бұрын
Thanks for the helpful info. Wish the instruction book had info like this.
@PilotViewProductions Жыл бұрын
Thanks Aaron. Appreciate the view and compliment. Dean
@svenpol71714 жыл бұрын
Really well done! I couldn't get a good grip on the case cover so I placed two screws on a board that was on the ground. The screws were placed at 11 o'clock and 5 so that when I turned the wrench clockwise they held the case in place and the spring snapped back into unlocked position. Thanks for this video.
@PilotViewProductions4 жыл бұрын
Really good idea. Glad it worked and thanks for the compliment.
@browndog74464 жыл бұрын
Thanks heaps!! Was doing my head in trying to refit the cover with the brake engaged!!!
@PilotViewProductions4 жыл бұрын
Exasperating isn't it? Glad this helped.
@popcornhead3479 Жыл бұрын
Awesome thanks, I thought I broke my saw lol before I found this video 😂
@PilotViewProductions Жыл бұрын
Glad you found me. Be sure and check out some of my other chainsaw/lawn mower videos if you wish. Dean
@Bugaboobunch Жыл бұрын
Thank you from Wilkes County !!!
@PilotViewProductions Жыл бұрын
Howdy neighbor thanks for viewing
@mikekyler4326 Жыл бұрын
Great video. Thank you so much for posting this!!!!!
@PilotViewProductions Жыл бұрын
Thanks for viewing. Dean
@oatmealsavage662 жыл бұрын
Enjoyed that thank you, though I was looking for the replacement of the brake band also
@PilotViewProductions2 жыл бұрын
Thanks for viewing and commenting Grizz.
@sassy62923 жыл бұрын
I did it! I had to use the second option and it worked great. Thank you
@PilotViewProductions3 жыл бұрын
Excellent thanks for watching
@fuelmanjoe8639 Жыл бұрын
LEARNED WHAT I NEEDED TO DO THANK YOU VERY MUCH
@PilotViewProductions Жыл бұрын
Thanks for watching. Dean
@michaelodwyer53053 жыл бұрын
Thank you for that info I am use to a chainsaw that did not have a brake clutch so made the mistake of taking off the cover without engaging the break first. So you can guess that I could not get the cover back. Lets hope now I can fix it.
@PilotViewProductions3 жыл бұрын
I’m sure this technique will work for you. Thanks for viewing and I hope you can subscribe and maybe find some other videos you can use. Dean
@wagzel2 жыл бұрын
Saved the day for me, thanks.
@PilotViewProductions2 жыл бұрын
Thanks for watching
@sleepingnoises5254 жыл бұрын
Thank you sir, you just helped me help my husband fix our chainsaw!!
@PilotViewProductions4 жыл бұрын
Ha. I'm glad you were able to help him Reyna and equally as happy my video was able to assist. Appreciate you taking the time to leave me a comment.
@garywharton600611 ай бұрын
Excellent method. Thank you so much.
@PilotViewProductions5 ай бұрын
Thanks
@advancedbuildingsolutions91702 жыл бұрын
Thank you!!! Appreciate it!! Save me a lot of time!!!
@PilotViewProductions2 жыл бұрын
Thanks for viewing and for commenting. Dean
@Keeps-3 жыл бұрын
Thank you ! Got it to work with the wrench method .
@PilotViewProductions3 жыл бұрын
Good. Please consider subscribing Alex, for the latest how-to videos.
@SaurierDNA3 жыл бұрын
Now that is a great informative video, with good details.. Many Thanks.
@PilotViewProductions3 жыл бұрын
Thanks for the kind words and for taking the time to watch.
@bonedd97173 жыл бұрын
This was very helpful, thank you.
@PilotViewProductions3 жыл бұрын
Thanks for viewing. Glad it helped. Appreciate the comment.
@seanbuell71222 жыл бұрын
Thank you for posting this!
@PilotViewProductions2 жыл бұрын
Thanks for viewing Sean. Hope I can talk you into subscribing for more. Dean