Husqvarna 350 Chainsaw Won't Start-Fixed!

In this video we will look at a Husqvarna 350 chainsaw that won't start. In this case I'll show you how to diagnose a bad fuel line and the steps involved in replacing that fuel line. #smallenginerepair
If you would like to support the channel by purchasing stickers, you can do that here: www.ebay.com/s...
If you would like to support the channel by purchasing a carburetor stand, you can find them here: www.ebay.com/s...

[@kaweah41]

Excellent post. Thanks for no loud annoying music. Excellent camera work and audio. Thanks!

[@TheGreasyShopRag]

@@kaweah41 Thanks for watching!

[@TheVespap200e]

Thanks for the video!👍

[@alans.4658]

Thanks Scott! I always learn from your videos

[@TheGreasyShopRag]

Thats what they're there for. Thanks for watching!

[@nottstrees]

where did you get the spark plug remover the plastic one looks handy

[@TheGreasyShopRag]

Google: Thexton spark plug remover.

[@nottstrees]

@@TheGreasyShopRag Thank you

[@johnclarke8180]

Thanks for sharing Scott!

[@TheGreasyShopRag]

Thanks for watching!

[@leonardryan8723]

Tks a million for your time and video 😊.

[@TheGreasyShopRag]

Thanks for taking the time to watch and comment!

[@jeffedwards9039]

Great work bro

[@TheGreasyShopRag]

Thanks for watching!

[@GarryBoyle-oe1ld]

The one thing I have. Notice witch why like coming to you channel is you very helpful as you explain things very well scott regards Garry from Australia

[@TheGreasyShopRag]

Thanks Garry!

[@chrischiampo7647]

Excellent Repair Brother 😀😊😇👍🏼👍🏼👍🏼👍🏼

[@TheGreasyShopRag]

Thanks. Simple but effective.

[@Dan_Akins]

I have watched several of your videos. Do you tune the carb on the older saws you repair? I suspect some may get tuned on trying to get them to run.

[@TheGreasyShopRag]

The tuning you see on the bench is just to get it close. I tune them all in a log afterwards.

[@tedneitzel]

Just replaced fuel lines in a few of my saws that all take the pigtail! They were all leaking where it goes into the tank. I probably could of pulled them up or down some and got more use but i like to do it right! See ya next time!

[@TheGreasyShopRag]

Another "cheat" that you can use in a pinch is sealing it with a drop or two of super glue.

[@MarkOxley-vo3kq]

Super!!

[@TheGreasyShopRag]

Thanks for watching!

[@jaasx]

Would like to see how you get the fuel line through the upper casing.

[@TheGreasyShopRag]

The fuel line needs to be cut at an angle so some of it easily pushes through. Then just grab that end and pull.

[@J.Manuel.]

Es un placer verlo trabajar en los motores de 2 tiempos,con que profesionalidad trabaja usted !yNada que ver con un hombre de carolina del norte que veo en KZbin llamado ( reparación de motores de jardinería) es un mecánico muy sucio ! Así que al verlo a usted da gusto ver cómo trabaja ! Siga así ! Un cordial saludo desde España 👍. PD:y en cuanto a la barbaridad que usted dijo ! En el vídeo no se aprecia nada !!

[@TheGreasyShopRag]

Thanks for watching and taking the time to comment!

[@MrsSunshine75]

My very first 2 cycle project was my grandpas Poulan 2300 cva chainsaw. Yep I got burned on it, long story short I eventually discovered the badly scored piston & cylinder! I’d still like to have a nos top end for it!😂

[@TheGreasyShopRag]

Yep, lessons learned!

[@noelstractors-firewood57]

Nice repair. I have a Husqvarna 350. Leaks bar oil out as fast as you pour it in. Was a great saw. What does the 45 on the cylinder head mean. ? Have a great day. 👍🏻👍🏻👋👋

[@TheGreasyShopRag]

Never gave it much thought but it might be bore size.

[@noelstractors-firewood57]

👍🏻

[@bretdavisdmd]

Hey! You said schmutz without putting it up on the screen!

[@TheGreasyShopRag]

I noticed that too after editing was done and thought nobody would notice. I was wrong 🙂

[@metmask3825]

Hi Scott. A lot of your repairs seem to be stiff diaphragms and broken/dissolved fuel lines. What's your opinion on alkylat fuels? Here in Sweden most people run their saws on Aspen 2 instead of mixing their own with fuel from the gas station. Is it better or worse for the fuel lines and carbs?

[@TheGreasyShopRag]

It seems to be better but there isn't any proof behind that statement. Just my gut feeling from observations.

[@steveriggenbach90]

Good find, easier to repair. Think it was from ethanol fuel? Hope ya feel better.

[@TheGreasyShopRag]

No, I don't think it was from ethanol. It was just an old line that cracked at a hard bend coming out of the tank.

[@cheba4786]

🔥😁

[@rooster3019]

OK, Scot; what movie freature character would describe your repair as; "Dat be ET"? Show your age by knowing.

[@TheGreasyShopRag]

Dunno. I must be young :-)

[@rooster3019]

@@TheGreasyShopRag Our Gang or the Liggle Rascals character "Buvkwheat". "Teacher, dat be ET".

[@chrischiampo7647]

What Show Had a Skinny Guy Who Would Always Say “Dynamite” 😀

[@TheGreasyShopRag]

@@chrischiampo7647 JJ Walker on "Good Times". Kid Dyno-mite!

[@chrischiampo7647]

@@TheGreasyShopRag You Got It Brother 😊😀😎