Husqvarna 350 custom muffler. 24 inch 3/8 Skip Tooth.

[@samishsawworks5870]

So, a little back story for those following along. I didn't design the muffler myself per se. I first saw one 6 or 7 years ago on Buckin's channel kzbin.info His old falling partner deserves the credit for the design. I first saw one on his 372XPW. Since then I've built a handful of different sizes, styles, variations on different saws of mine. Some worked well, some not so much. I even sent him one that was a complete dud 🤦‍♂️ Buckin' and I talked back and forth a bit not long ago & the honest feedback I was able to get from him proved invaluable. I finally landed on this recipe and it seems to work. This variation is a little different than the original Bearclaw muffler I had seen, but it's of the same design. Anyway, this style really seems to bring these smaller saws to life. I just wanted to give credit, where credit is due.

[@samishsawworks5870]

Hey! So happy you liked it TazMan. A fellow can't help but to get giddy and bust off a "little kid giggle" or two when you hear it, it's contagious. It's even more fun for me to see SOMEONE ELSE run one! You made ME smile. They definitely transform them into little rippers! Hopefully it'll serve you well. 🤘

[@tazman-kennyfuller]

I can't thank you enough Ben. This is so awesome. It's pretty snappy now for sure. Gonna be even better for limbing now. You rock brother. Definately gonna get plenty of smiles by the mile. 🌲❤🌲👊🪓

[@ChippyOutdoors]

That little saws still impressed me !

[@tazman-kennyfuller]

Hahshahahahah not bad for just having a better muffler hey. Love it. 🌲❤🌲👊🪓

[@michaelwhiteoldtimer7648]

Just remember loud pipes save lives

[@samishsawworks5870]

🤘

[@tazman-kennyfuller]

Woooooohhhooooooooo yes they do my friend. Lovin it. 🌲❤🌲👊🪓

[@Smittyschainsaws]

She sounds gnarly!!

[@tazman-kennyfuller]

Little Rippa. Hahahahhaa thank you Smitty. 🌲❤🌲👊🪓

[@Tony-tp3zw]

Taz-man thanks for the reply on the Oregon clutch drum. Been trying to find a rim drum that works on my 350 Husky, you saved the day God bless. The Spudman

[@johnmorse5617]

What a screamer , heck of a lot a difference just the exhaust makes . It's great Kenny love ya buddy keep it screaming.

[@tazman-kennyfuller]

Thanks John. Oh she'll be waking up the bears here pretty soon hahahahah. 🌲❤🌲👊🪓

[@Aaron_A_Lynch]

Works great. Holds rpm nice🤙🏻🪓😎

[@tazman-kennyfuller]

Thank you Aaron. I always look forward to yours and all the saw builders feedback on stuff like this. Love ya man. 🌲❤🌲👊🪓

[@cariboomike99]

Holy smokes what a difference! That’s a beauty saw!

[@tazman-kennyfuller]

Thank you Cariboo. Oh man she's a little ripper now for sure. Love ya man🌲❤🌲👊🪓

[@stuartramage5933]

music sweet music .awesome vid tazman .yeha to ben .peace an love from scotland

[@tazman-kennyfuller]

Thank you Stuart. Always a pleasure having you here buddy. 🌲❤🌲👊🪓

[@kellyhamel4302]

Love that saying Spirit High let the Chips Fly

[@tazman-kennyfuller]

Thank you Kelly. Glad you like it buddy. 🌲❤🌲👊🪓

[@michaelwhiteoldtimer7648]

Great gift, what a difference it made. Thanks Tazman for the video

[@tazman-kennyfuller]

Thank you Oldtimer. Now to work on the chain to see where it performs best. We are on the right track. 🌲❤🌲👊🪓

[@kevinmaxam2414]

Sounds and cuts like a different saw. Got to love it. Be safe and be careful

[@tazman-kennyfuller]

Thank you Kevin. For sure woke this little beauty up. Love ya brother. 🌲❤🌲👊🪓

[@NothingButChainsaws]

Buddy that thing is wicked cool! Now have it ported!

[@tazman-kennyfuller]

Thank you Chad. Hahahahaha it might just happen. Ya never know. Love it. 🌲❤🌲👊🪓

[@jaythe306snowmexican]

Nice job samish. That's awesome buddy. Hope you have a great day 😎

[@tazman-kennyfuller]

Thank you Jay. Hope you have an awesome day buddy. 🌲❤🌲👊🪓

[@stihlhuskyworkin1011]

Man tazman that 350 sounds great! Wicked throttle response too. I may need to look into one of those mufflers for my 346xp 👍🏼. Great video brother keep them coming ✊🏻

[@tazman-kennyfuller]

Thank you Stihl. Oh man this saw is gonna be super sweet for limbing now. Snappy right outta the hole. Love it🌲❤🌲👊🪓

[@jamesconnors9388]

Sounds sweet but runs even better. Thats a win bud. Giver the garlic

[@tazman-kennyfuller]

Thank you so much James. Oh heck yeah there will be plenty of garlic giving with this dandy. Hahahahha. 🌲❤🌲👊🪓

[@marynapier3962]

A little rip roaring saw

[@tazman-kennyfuller]

Hello and Welcome Mary. Thank you for watching and for your support. Much appreciated. 🌲❤🌲👊🪓

[@Finom1]

God Bless and Protect you and your family TazMan:) Bless you for sharing your wisdom with your united loving and kind community:)

[@tazman-kennyfuller]

Thank you very much Finom. Bless you my friend. 🌲❤🌲👊🪓

[@johnpoffenbaugh7172]

Looks like one lucky man, or big kid! That 2 cycle cackle makes it all worth pulling the rope! Very nice clean job of fabrication! Appears you will have fun with it

[@shaner67]

TAZMAN, did you tweak the carb a bit? Gawd damn that's impressive!!

[@tazman-kennyfuller]

Thank you Shane. Yes I had to give it more fuel on the low side and on the high side. 🌲❤🌲👊🪓

[@james6967]

where did get the muffler very nice

[@307j.o.a.t9]

Wooohooo!! That made a difference! I gotta try to build something like that for paulas 353... if she will let me lol. Thanls brother!! STAY SAFE!!!

[@StevenLettsPerformance]

Love it! Quite the difference

[@tazman-kennyfuller]

Thank you Steven. 🌲❤🌲👊🪓

[@LumberjackSmokestack]

That’s great. Awesome sound, great throttle response. Always love the energy TazMan! Headed off to Ben’s channel. Have a good one brother!

[@tazman-kennyfuller]

Thank you Lumberjack. Hope you have an awesome day buddy. 🌲❤🌲👊🪓

[@andrewscott2866]

I like it👌 definitely gives it some more snap👍👍

[@tazman-kennyfuller]

Glad you like it Andrew. Fir sure better throttle response for limbing. 🌲❤🌲👊🪓

[@Tony-tp3zw]

Tazman where did you get your 3/8 sprocket for your saw, been looking cannot find one for my husky 350. Your saw sure is sweet and a ripper. Who made the pipe sweet sound and it looks like it pulls hard. The Spudman

[@tazman-kennyfuller]

@Tony-tp3zw Hello and Welcome Tony. Thank you for your support. Much appreciated. I think I found the clutch drum for rum sprocket on ebay. The oregon part number is 108215 on the drum. Samish Saws made the Muffler for it. Hope this helps. 🌲♥️🌲👊🪓

[@thehealedheartspace]

OH YEAHHHH💪❣ Thats sounds and responds quit different than before! Amazing what a muffler can do!! Thank u and love ya TazMan💪❣🔥🔥🔥✌❤

[@tazman-kennyfuller]

Thank you Healed Heart. It's amazing how much different the throttle response is. Love it. 🌲❤🌲👊🪓

[@johnarnettsways.8758]

Wow what a difference in throttle response buddy. That is awesome. Wonder if a Mac would have the same response? Have a great day and enjoy it. ❤️🌲🌲🌲❤️. Yeeeeeeeeeehaaaaaaaaaaaa !

[@tazman-kennyfuller]

Thank you John. Not sure about the Macs but the Pioneer sure take well to these type mufflers. Love ya brother have a great day. 🌲❤🌲👊🪓

[@simpleman4224]

Sounds great!👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

[@tazman-kennyfuller]

Thank you Simple Man. Glad you like it buddy. 🌲❤🌲👊🪓

[@Apalm12]

Does he sell these pipes?

[@jeremywever6947]

🔥🔥🔥🔥🔥🔥🔥👊🏼👍🏼🧡🌪Tazmaniaxe!🌪

[@tazman-kennyfuller]

This little saw is ready to shred for sure now buddy. Thank you. 🌲❤🌲👊🪓

[@eddyarundale1566]

👋

[@tazman-kennyfuller]

Hey buddy thank you Eddy. Lovin it. 🌲❤🌲👊🪓

[@edwinladshow5791]

Wow!!

[@tazman-kennyfuller]

Crazy huh Edwin. Thank you buddy. 🌲❤🌲👊🪓