Donny top show thanks for sharing Shop starting to look great 👍 that slab that Buckin gave you looks great 👍 Johno Darwin NT
@leonardryan8723 Жыл бұрын
Donny beautiful maple work table, great video tips . 😊
@gavinelliot35642 ай бұрын
Got a 572xp and a 592xp/ choice. Never had a prob.592 is an animal.
@ronsilva516 Жыл бұрын
That was good info Donny on the auto tune Sam as the m tronics saws
@saltrock9642 Жыл бұрын
Nice bench. Buckin is an awesome guy to give it to an awesome guy. And I’m liking the new DW bunker you got goin on. Lookin forward to its completion.
@williamwallace9620 Жыл бұрын
I've been told by my Husqvarna dealer that you should do a 5min+ idle and then go to a 75-90sec full throttle rip-cut in a log big enough to allow for that when you first fire the saw up on 1st tank of fuel, says that calibrates it.. also told me to run 40:1 instead of 50:1
@stevetheriault4164 Жыл бұрын
THANKS FOR THE GREAT TIPS DONNY NICE LOOKING SHOP BUDDY,,,
@donnywalker4691 Жыл бұрын
You bet
@MajorDeliveries Жыл бұрын
That bench looks nice 👍
@josephwhite6881 Жыл бұрын
thanks for all your updates and videos.
@thebradleysoncatbirdhill6849 Жыл бұрын
As always, great information, Donny! 👍👍👍
@blacksmoke50094 ай бұрын
Thanks for sharing your thoughts and knowledge enjoy your Chanel as well as Buckins channel great content talent and pride ! 👍love to send you my 572 some day and let you work your magic! Thanks again from Bill in upstate NY
@buildingwithtrees225811 ай бұрын
I have an ancient 550xp. I put a new piston/rings in. Ran like crap. Asked around to upgrade the firmware...$60 ish. The reset works, but would like the newer firmware without getting graped.
@JaseC80 Жыл бұрын
Excellent info Donny. Great to see your home shop coming alive. Pity I live on the other side of the globe, I’d pop in regularly.
@donnywalker4691 Жыл бұрын
Cool, thanks
@patthesoundguy Жыл бұрын
That bench is pretty nice! I didn't realize that Buckin's Rip Saw was auto tune, I should have clued in lol It idles so darn great and it makes sense why now. That has me convinced that the auto tune setup is a good thing for sure.
@Bixby-and-Buckshot Жыл бұрын
I have never reset my auto tune on my 555 or 592. I just run it until it runs good. Sometimes when I change air filters or the temp swings a bunch it’ll run bad for a bit but I just keep cutting and it magically fixes itself in half a tank of gas.
@johnfroese7158 Жыл бұрын
Thank you for the info. Would that work on the Stihl Autotune as well?
@rcarmody15 ай бұрын
I'm running a new 592 for about a week. 6-7 tanks of fuel. when I'm in smaller wood, limbing or bucking small stuff (4-8") such as cleaning up a crown etc. the saw sounds like it is "4 stroking" , great power / torque when in the cut, but as this is my first autotune, I just want to ask ... what I'm experiencing with 4 stroking, is this normal? thanks for the great videos, love what you guys are doing out west
@Cpk20001 Жыл бұрын
Idk what the old schoolers in denial say, the new autotune stihls, husq are f'ing great !
@MrHuntermikey Жыл бұрын
Couldn’t said it any better. The Husqvarna auto tune saw’s just run and 40 minutes a tank is even better
@MichaelCarouthGutenTag9 ай бұрын
I was 30 ft up a tree by myself when my husky started high reving. I had my scrench, which was worthless in this situation.
@leonardvirtue5753 Жыл бұрын
That’s my teacher sir bucken billy ray smith 🤠🤙🤙🥰🥰🌲🌲👌💪👍💯💯💯💯😇
@sawmanbigtreeslayer2360 Жыл бұрын
Nice sturdy bench!!
@robertdouglas3456 Жыл бұрын
Have a great weekend Donny!🤩🤩
@R_Wyatt5452 ай бұрын
Got a new 592 that RIPS, but after initial startup, it won’t idle for more than 10-15 seconds. It started blubbering and dies so I am having a hard time letting it idle for that 5 min. Any tips/advice?
@jensenwilliam5434 Жыл бұрын
Thank s
@petermccuskey18328 ай бұрын
Thank you Sir!
@leonardvirtue5753 Жыл бұрын
Looks bloody Good!!! Mate 🤠🤙🤙💯💯💪🌲👌👍
@Syncop8rNZ Жыл бұрын
Nice bench!
@davt861510 ай бұрын
Having issues with my 565 it runs no problem on high idle but soon as you blip the throttle it cuts out, doing my head in to be fair its a new saw
@pm270100 Жыл бұрын
good info well done for a old bloke 😁😁😁😁😁😁
@ishure8849 Жыл бұрын
Stump Grinder.
@jamesf2656 Жыл бұрын
Good stuff. You mentioned air leak makes it run rich - I would have thought the opposite due to excess air allowed in the system? Or does the leak not enable air flow through the intake meanwhile fuel continues to be added?
@donnywalker4691 Жыл бұрын
On a non auto tune it would run lean and blow up but auto tune selfs adjusts for it dumping to much fuel in them to compensate
@jamesf2656 Жыл бұрын
@@donnywalker4691 Thanks Donny, cheers
@MATT.MAN-PEACE-LOVE Жыл бұрын
Donny you are one cool dude a wealth of knowledge when you speak my brain just gets rejuvenated with learning new things thank you man for your videos enjoy every one keep the rubber on the road sticky side down shiny side up! Hey what’s a brown sticky thing?? A brown stick 🦯 hehe Love ya man ✌️❤️🌲🪵🪓🐝
@ccsCustomsaws Жыл бұрын
lots of experience with low quality gas taking the main jet out and causing die at idle issues. Bad gas takes the carbs out.
@pranasbaikus87886 ай бұрын
But what if it does not run on idle?... only for 10-20 sec. My 560xp just got new piston..
@pranasbaikus87886 ай бұрын
On high side it looks good, but I'd like to do break in first. Press and vacuum tests passed OK.