Husqvarna Craftsman Hydromatic Shifter Adjustment

Husky Quad Drive SAE Ratcheting Wrench Set (2-Piece)
Wrenches: 5/16 x 3/8 and 7/16 x 1/2, 9/16 x 5/8 and 11/16 x 3/4
amzn.to/3ek74SZ

[@timrandall4659]

I know this was a long time ago but this is the first thing I've found that shows that spring. Thanks!

[@pierrebroccoli.9396]

Thank you for this guide. Goto adjust mine forward - have an inch and a bit of the lever from it being full forward on the drive level at the fender. Makes it unable to engage reverse other than at a snails pace. Same time the drive belt when the lever is centered jumps the transmission with the park brake being applied. This helps me considerably. Now, where did I throw that 1/2 socket ??? 🤣👍 Might replace the drive belt at the same time as it's probably stretched over the years.....

[@JeanGordon-ov9hm]

Excellent straightforward got right to the point. Was able to fix my problem quickly

[@fredgrendel7814]

Perfect! Thank you, got mine adjusted

[@Njf4192]

1:46 The furby eyes in the top left corner 😂😳

[@bradshannon862]

I have a YTH 150 that I inherited. I finally got the thing running after sitting for 2 years. When I push the lever forward or backward it will grind (not moan but grind) and act like it wants to move but not engage. I don't wanna strip gears so I only tried a couple of times. What could I do to get it fixed?

[@Johnny53kgb-nsa]

Do you have a video on adjusting the idling speed on a Husqvarna? Thank you, John.

[@Dave7160]

hi i have the same mower but mine is a LTH 130 and the blades wont disengage please help me ? theres an arm that I'm not sure where it goes to coming from the mowing deck/

[@rsmitchell1295]

were do u get cutting blades for this are they 5 star

[@jackderaway]

Mine is just moving freely and not shifting. What’s wrong with it?

[@jannemannetje32]

Why are there two pivoting points in the lever?

[@joserenteria9417]

What's with the baking pan?

[@johnellpapa]

Do you have a video on how to fix or replace that spring because my shifter is just totally limp and won't roll at all.

[@ToadLick]

@johnellpapa - I got the same issue, Limp Shifter lever, 100% sloppy stick. Not sure what the fix is, cant find anything yet. I'll try to help if I find anything, please do the same... ty

[@user-jp2fe3yf5f]

Is that grinding noise normal ?

[@scottpusbach8106]

I have a Husqvarna GHT 2548 it has a kohler engine model no.CV730 and it has no brakes (.)

[@scottpusbach8106]

As there a just ment on them

[@rsmitchell1295]

42 inch cut Husqvarna YTH 150

[@naturaltraits4959]

Mine completely broke off