Husqvarna e-series 445 X-TORQ Chainsaw REVIEW

[@pl747]

I have a Husky 372XT and a little 041 and love them. I also have a Stihl and I don't even pick it up anymore. That saw has plenty of power for a 20" bar, even a 24".

[@joeboisselle6856]

have that same saw for 9+ years. not one problem. and starts on 3rd pull every time. not before or after . 3rd ..i burn wood for heat and cut for other people at times to help them out..and do alot of building on the land and use it for that..has same plug and air filter (clean them when needed). only part that i had to replace was one spraket..not clutch just the spraket..last year.. has never let me down..i keep two stoves burning so thats alot of wood..(home and shop) forgot camp too..happy cutting ...

[@homegrowncountryhomeplace]

I had the same concern about the 1 bar nut but have found it stays tight and no problem with it backing off. Good firewood cutting and have a Blessed Day Friends!

[@IdahoHillbilly]

I have been using the heck out of it and have not had another problem with it at all. I LOVE It nicest saw I have ever had

[@RJ-rn3uv]

Good Morning HB and the Lovely Miss Kitty. Enjoyed the morning coffee. Enjoy your day.

[@backroads82]

You have a good looking saw there. Sometimes on a new saw the side plate wont seat all the way due to a casting bur either on the plate, main housing or even the metal guide plates. I have also had (usually my fault) the metal guide plates catch on a thread on the stud and cause the side plate to cock a little when tightening the nut down then pop off the thread during use letting the chain loosen up. The burrs or rough areas will usually go away after some use. I have threw a few chains and every so often the drive teeth will get burred up when the chain doubles back on itself and catches up on the little aluminum leg/stop under the side plate. This happens more on my husky than my poulan probably because the husky is turning more rpm`s. Good luck!

[@MrMuzza72]

Yep I have the exact same saw and the exact same problem on 2nd use , threw the chain and had to file the burs off to get it back on. But have kept eye on that nut and chain tension, saw is great and I burned through 2 tanks of fuel today loving it

[@dom3672]

i have one in a 20" bar and yeah my troubles are with the chain coming off i fell alot of wood for my home and others but its still kicking good

[@MuskratOutdoors]

Nice saw. I have never had a Husqvarna saw, but have heard good things about them. Did you know, long ago, the company made guns? Rolling block single shot rifles. Some friends of mine bought a Dewalt battery chainsaw......I thought "What? Battery operated? Can't last long..." WOW! I have to say, it's amazing! Lots of power, no cord to pull, and pull, and pull...just squeeze the trigger and it starts. Let go and it stops while you walk around or move a block of wood. The battery lasts a long time, and no gas to spill. I am very surprised! It's a good saw! Not cheap though....

[@IdahoHillbilly]

Hmmmm I will have to google them. Never knew that. I have seen them Dewalts and would like to get one down the road. I used my chainsaws a lot when im building

[@MuskratOutdoors]

@@IdahoHillbilly Here's one I looked up quick. A lot of them were shotguns. simpsonltd.com/husqvarna-1867-rolling-block-rifle-z39572/

[@TWiGsADV707]

LOVE my Husqvarna saw, best saw I ever used!!! Got a Husq saw and a motorcycle now!! hahaha

[@squirrellyacres]

Thank you for the great information about the saw.

[@rdnkrfnk]

Maybe a drop of that blue silicone on the threads of that keeper nut will keep it from backing off

[@perryanderson9127]

I just orderd mine a few days ago. cant wait to get it

[@virginia7191]

Nice! Look out firewood, here you come!

[@jonnorton9720]

Put your chain with the bottom in a vice before filling it to straighten it the best you can save as much as you can so when it rounds the sprocket it don’t jump..

[@jonvaughn8286]

Great saw. Spend the extra $ for husqvarna bar oil. Ran cheap bar oil in mine that I got at menards and overheated bar. Also recommend vp racing fuels 50:1 fuel.

[@IdahoHillbilly]

My All time Favorite saw and I have had MANY other then in very cold temps I use nothing but vegetable oil for bar oil and over three years still the same bar and I use the saw daily on my lifestyle

[@lindamcconnell9441]

My junior year of high school my Mom bought a sewing shop display Viking sewing machine at the county fair. That was who made them. Later when I was grown I bought a husqvarna machine for myself. I got years of use out of it but later it could not be fixed because of a plastic part. When Mom died I kept the Viking. She was a quilter. It was well used. I am still using it. It has no plastic parts. I'm 65.

[@IdahoHillbilly]

That is Awesome! They sure dont make stuff like they use to

[@amyeteel5379]

GOOD MORNING 🌞🌞🔸

[@mikewoods897]

Yeah...my Stihl does that when I miss that first kick. I usually take the plug out and let it sit for a day or 2. 🐸

[@IdahoHillbilly]

Ya they are a pain in the Butt ;-)

[@TimberTramp]

Loosen your tensioner way off so there is a bag I the chain....install the chain on the clutch and put the bar and side cover on....fire it up and blip it a few times, maybe 15 sec runs....then loosen the nut and tension the chain back to Normal....the burrs should be all gone.

[@Bigdaddy1992.]

Nice saw

[@gregormiller4037]

Hmm....think it was sent by AMZN, if ya still have the box, send it back "I've only had this a week and threw a chain" and send the bar back, we can get a 20-24" of your choice? Please advise :)

[@IdahoHillbilly]

Oh Heck No...I LOVE IT 😁...Maybe it was the operator. I have been using the heck out of it and no problems what so ever

[@gregormiller4037]

@@IdahoHillbilly Ah good to hear then...I guess they have a break-in period:)

[@oddopops1327]

👋😊

[@joshk5300]

Why do so many people pronounce it wrong? There isn't an A between the Q and the V

[@beachlife1411]

Nice

[@sandhollowhomestead6972]

You'd better fix the beast now. You're gonna need it to carry the wood you can cut! Shaps too!

[@IdahoHillbilly]

SHE is READY To Go ;-)

[@davidjenson4512]

Check a new chain frequently. Keep em tight, ... always, or they're likely to go-on-walkabout.

[@RonRay]

buenos dias senor Kevin y señora Kitty. ;)

[@IdahoHillbilly]

And Good Morning to You My Friend

[@rickg2589]

Husq-A-varna?

[@IdahoHillbilly]

WRONG

[@dizzizzfred2day833]

I own a big husqvarna if ya wanna see a photo .. it’s a monster at bringing down trees ... 28 inch bar

[@proslot11]

Install a star washer behind the nut.

[@simmonsdevin]

Where is this saw made? U.S.A. ? Sweden?

[@mynameisearl2626]

knew the one nut wouldn't work ... husqvarna realy lowered its standards

[@IdahoHillbilly]

WRONG...BEST SAW EVER

[@tennesseebornandraised1075]

Hello from Tennessee 😊👋