HVACR: How To Check A Filter Drier For An AC/Refrigeration System? Suction/Liquid Line Filter Drier

[@Unsensitive]

It's exactly what I needed. My AC unit began freezing up, and hasn't been working well since I had some repair work done back in the fall. Yesterday the system froze up, twice. I started watching education on AC units, and have observed a significant temperature differential across The liquid line filter dryer. One side is warm to the touch, while the other side is condensing water.

[@JumpermanTech]

Awesome. Glad this video helped. If you can notice the temp difference to the touch then you have a huge restriction there. Must recover the refrigerant, pull a good vacuum & replace that filter drier. See if that helps. Thanks for watching & Stay tuned for new videos every week🔧⚡️

[@JumpermanTech]

Use fresh refrigerant as well🔧

[@Unsensitive]

@@JumpermanTech pretty sure this is what caused the problem. I'm guessing the prior workers used old refrigerant. I'll be watching the next guys like a hawk.

[@63Seddy]

Pretty much one side of the drier was acting as a pre TXV

[@izzybell11]

Interesting and helpful video. Well explained. Thanks for sharing this useful video with us.

[@JumpermanTech]

Thank you Bogdana! Much appreciated 🙏 Stay tuned for new videos every week🔧⚡️

[@mariodiaz6438]

What's the differencial of temperature to tell filter it's bad then?

[@iniatiniat3822]

Great video jumper man tech, keep it up

[@JumpermanTech]

Thank you very much! Stay tuned for new videos every week🔧⚡️

[@thesilentonevictor]

Great video jmt

[@JumpermanTech]

Thank you Neilvester! Stay tuned for new videos every week🔧⚡️

[@musakavalci9470]

Excellent content 👍🏼

[@JumpermanTech]

Thank you Musa! Stay tuned for new videos every week🔧⚡️

[@wasimedoo7994]

Very good information bro keep it up God bless

[@JumpermanTech]

Thank you very much! God bless you too & Stay tuned for new videos every week🔧⚡️

[@shine-cg9uf]

I have those tools 👍🇺🇸💪❄ thanks

[@JumpermanTech]

Awesome! Thanks for watching & Stay tuned for new videos every week🔧⚡️

[@billyhorton5779]

Good stuff!

[@JumpermanTech]

Thank you! Stay tuned for new videos every week🔧⚡️

[@iancunicolae2626]

on a variable speed compressor like the bosch (25%-110%) ids 1.0 ; should the system be put into force mode (100%) before you test the temperature difference? for me in regular mode when its about 50%-70% compressor running load the Temp Delta is about 5-6 degrees however if I put it in force mode its under 2degrees. Manufacturer says it must be in force mode in order to be able to charge. I am assuming the same holds true for the Liquid line temp difference across the direr? is that true?

[@ThaDocta0623]

Those pressure checkers have low loss connections?

[@jhonnychingass6252]

What is considered a clogged filter dryer,,,what temp between inlet n outlet,,,3 degrees,,6degrees or what number?,,,

[@jessemiller7413]

2’F

[@alexander.oo7]

Dose frost evaporator one of the symptoms?

[@florascent9ts]

My mom hired some rando who just pointed out the fact that there's no filter in the system and didn't offer a repair or refrigerant change service? Is this common? I feel like he could've made some money offering an evacuation, installation, and recharging of the system.

[@marvinpinder5756]

Can i see more vidieos like this

[@JumpermanTech]

I have 250 videos on my channel. Subscribe for more! Stay tuned for new videos every week🔧⚡️

[@tatawfotabong8144]

How can one get this tool and what's its name

[@l.crossjr]

Nice

[@JumpermanTech]

Thank you! Stay tuned for new videos every week🔧⚡️

[@dannymoreno03]

Good video..but u need to show how to do it a real sistem

[@wasimedoo7994]

Ho can you know the size of the filter

[@morejelloplease]

Mine is mounted indoors right before the air handler, it's making a loud hissing and bubbling sound, is this normal?

[@mikesmelon5714]

I am getting a bubbling sound that just started today from the filter. What was the outcome for you?