Hydraulic Log Splitter

Log splitter getting some welding before going on the new holland tractor, farming on 👌🏽

[@willyfindlay4398]

Great bit of editing on the ammonia straw bale cutting stripping sequence, well done. How about putting star type blade on the log splitter so you can get more than one log split for each ram movement.

[@jamesmcclaren6534]

That’s strangely satisfying to watch pal 👍 I’m looking through the comments for the ppe boffins 😂😂

[@CrawfordsFarm1]

None yet

[@totomesch1940]

I love agricultural engineering........ You need something, BOSH, stick some metal together & bingo, there it is. When the apocalypse hits I'm getting to my nearest farm to take shelter. When I was a laddie on my grandparents farm I was in charge of log & kindling production....... Still love it to this day.

[@philipgraham6980]

Fill the new bed on the log splitter with box section steel slats instead of the board and all the rubbish bits will fall through out of the way.

[@CrawfordsFarm1]

Thats a idea 👌🏽

[@EssexFarmingPhotography]

Great video Crawford very nice cool car very nice welding shame the splitter broke

[@brendanl3071]

I only realized you pronounce cows a funny way to use in Ireland 🤪 nice log splitter. Had the axe 🪓 out this week too

[@user-rw2um8ro2p]

Great video Crawford the splitter is a great job

[@stuartc499]

Great minds think alike, I watched this video the morning after I extended the platform on my home made log splitter 😳😂

[@stubuddle5561]

Great video the splitter works ok. As we spoke about go for the 15000 that would be a great target.

[@jacklikesrugger]

Ah… Mate, That hat !!!! I love a good beanie!!!! fancy Sending me one?🤣🤣

[@CrawfordsFarm1]

Look out Tuesday

[@davidangus2456]

We have a bedding machine it is much more straw efficient although it dose rope up a tractor all winter so maybe you would be better looking into a telehawk or a spreadabale for the forklift if on the market

[@PaddyGun]

With the new shed would you consider feeding using a small diet feeder to mix the straw and minerals and feed into channel

[@PaddyGun]

I would go with a defender over a pickup but that’s just because I’m handy with a spanner and a multimeter and could keep it on the road

[@stephenross1581]

I’m not that sure you do save straw with a blower, we always found that we had to bed them every day with the blower but rolling out by hand lasted two or three days, one advantage to the blower is we use to feed the silage and hay with it.

[@iancoupe20v43]

got to love the log splitter, reweld it using a stick welder as its a lot stronger weld than the mig.

[@CrawfordsFarm1]

Run out of talent real quick tho

[@drdulas5055]

Check with Farmer Phil about a straw blower. He just discussed it in a recent video. Amazing you have the same tape measure but we use the other measurement here in the USA. It appears you need a new sharper longer wedge on your splitter Crawford. What kind of wood were you splitting? Nice to spilt on a concrete floor and inside. Thanks youngman. See you in the next video!!

[@phil6465]

I don’t have a straw blower, but they all say you’ll only use half the amount of straw. Straw with us is around £22 per round bale so can add up.

[@paulthompson8467]

Fine logsplitter 👍

[@elleeshialeaver9375]

Hi hope you are ok you can get a straw blower that fits on the front of your loader if you contact Joe steel or look a his video I don't know the price of one but take a look best regards and stay safe

[@thomasbray8409]

I've got a kv spreader yeah great but cause Alot of mess and dust!! I'd persevere without or get a bale unroller

[@lindaarmstrongjackman9788]

Another great video. 👍👍😁 The Nurse/Mom in me is thinking, “Where are your safety glasses?”

[@jamesbowens60]

If that wide boy is hardwood I’d slice it sand it and sell chopping boards in the farm shop?

[@bobcrawford2105]

Straw blower ask Joe Seels he as a channel on you tube. He a mate of Ollies

[@angusharrower375]

You should try rolling an average of 18 bales every second day

[@CrawfordsFarm1]

🤣 sounds fun

[@CrawfordsFarm1]

🤣 sounds fun

[@williamneedham2536]

Have you got any hats available to buy

[@CrawfordsFarm1]

Coming soon

[@JohntyNich]

The splitter head was getting pushed sideways from the wood grain probably having more affect than not being quite straight. Not having an engineering brain, I’d just be rewelding it 🤷‍♂️😅

[@acorndogs904]

Evening

[@ashleystodart6523]

Half a bale

[@Greenie954]

Cawford they are H frames not I frames on you splitter

[@CrawfordsFarm1]

Same thing just on its side

[@Greenie954]

No, got to say it the Yorkshire way haha

[@matthewtobin1653]

Who won your trailer challenge

[@ENK3_]

is that stick or tig welding? I want to learn for my job too

[@CrawfordsFarm1]

Thats mig 👍🏼 easiest of the lot

[@roberthiggins6401]

Staff could come in half hour early and warm up chopping logs. 😉

[@garymadden2656]

👌

[@Starkagri]

Got the kv 3400 on demo today from HRN. Brilliant bit of kit. Shifted it up the rd tonight about 7miles. Best plough to shift in transport I’ve ever had on the rd. made a great job in the field as well.

[@wulliewhyte544]

Fancy putting up a video of you playing with your chopper😂try the muck graip for moving timber its much easier

[@step6829]

Hope Lulu has a proper leash, too 🤣