75Days Manufacturing process of Huge Industrial Transmission with Amazing Skills

Рет қаралды 469,069

Күн бұрын

Пікірлер: 119

@dougalexander7204 21 күн бұрын

We should not diss these guys and their fabrication methods. They are doing the best they can with what their industry has to work with. They are old world craftsmen and proud of their skill. With time things will improve for them but for now they are doing excellent work and taking care of their families.

@grandpabill6684 Ай бұрын

These men are very skilled workers ! Ifeel bad for them. Somebody is making a fortune off their backs . Think about it for a moment. This is a sweat shop, and nothing else. It's dismal there, and don't kid yourself for a minute they hurt their workers all the time . I worked in a fab shop down in the gulf , in the great state of Louisiana . It was dangerous there. I witnessed several injuries . Hell, we were dressed to work had boots gloves helmets welding hoods and attire. These guys have sandals and robes on and are being used and abused, going home every day carrying nothing but their fuzzy assholes out the door. Wore out put away wet .I realize it's Pakistan and not America . Workers should wake up and download a little bit of self-worth and some dignity. And , you people who run work should consider a little bit of empathy and take care of those hands that sometimes actually bleed for you !

@beakytwitch7905 Ай бұрын

Heavy engineering, made to look easy. How these guys cut with thermal lances and then welded without machining the cut edges, managing to cut to accurate size and weld to make very heavy gear boxes. Phew ! Great to watch. Thank you! 😊❤😊

@geoffreycodnett6570 Ай бұрын

How do you think Titanic was built! You're not seeing every single operation or the video would be 25 days long at least! 😂

@fredoflf3707 Ай бұрын

Faut reconnaitre que cette construction réaliser par ces ouvriers dans ces conditions où la sécurité est totalement inexistant 🤕😱, juste dingue qu'ils n'ont même pas de chaussures de sécurité, casque, des gants et une tenue de travail adapter, pourtant il arrive a travailler a priori sans accident🤔, le soudeur qui soude avec un masque en carton 😱 et il peint également sans masque, les voies respiratoire en prenne un coup a la longue. L'espérance de vie chez eux est de combien, c'est inquiétant. En tout cas bravo pour leur motivation, leur savoir faire car on ne peut pas leur enlever ça, ils savent très bien ce qu'ils font, respect

@mirbiezhere2803 Ай бұрын

75 plus but in northern areas of Pakistan it exceeds 100 plus years

@miroslawmiroslaw0526 Ай бұрын

the real masters of their craft do everything by hand

@katkov000 Ай бұрын

Шикарное видео ребята! Снимайте еще.

@keninboaz Ай бұрын

amazing video. Those guys know what they are doing.

@tonyzanotto1691 Ай бұрын

Bet it took longer to make it than to break it .

@bigcarl6655 23 күн бұрын

it's unbelievable how many functions one welder has 😂

@tonoalvarado1436 Ай бұрын

¡IMPRESIONANTE! 👍👍👍👍👍👏👏👏👏👏👏

@robertpoliti7284 5 күн бұрын

great craftsmanship, you guys rock!

@mdf2mdf287 Ай бұрын

With the cost of so many health and safety regulations heaped upon them I can't see how they can make a profit.! I need to get myself some of those safety shoes and one of those top notch welding masks.

@peterelwert5598 Ай бұрын

How people worked in England or in the US 150 years ago? I think it's the same. Only then there were not as many socialists and "greens" as today, who can only complain.

@andreasschurtz1709 Ай бұрын

Respekt vor dem Arbeitern,Hut ab .

@sparty94 Ай бұрын

now i want to see them fit it in the car.😁

@jda2250 17 күн бұрын

Крутые пакистанские парни.Сварной в тапках .герой

@ger13nunyah56 Ай бұрын

This guy’s are Amazing 🤩 🤘😎✨👍

@PrivateBanking411 Күн бұрын

Wow ... 👍🏼😎💯

@mangegravare7032 Ай бұрын

I'm guessing that the amazing skill is the total absence of weld prep....

@cameronlilly4814 25 күн бұрын

There may be an opening at their shop for you! You'll have to supply your own sandals though.

@mangegravare7032 24 күн бұрын

@cameronlilly4814 😂

@hobtink Ай бұрын

Welcome To India the land of NO ground clamp hardly ever they have the bare wire of the ground just touching what ever they’re welding on or something conductive touching whatever they’re welding on 😊

@ermj88 Ай бұрын

Welcome to UEA...just sit, shut up and eat your free bread...it grows on trees.

@rashidzaidi5211 17 күн бұрын

Not India Sir this Lahore Pakistan

@LeNGUYENHUNG Ай бұрын

thật sự rất thích xem video của các anh Pakistan.

@JaneWillow12 3 күн бұрын

It still amazes me that they do all this wearing pajamas and slippers

@АндрейСисАдмин 26 күн бұрын

Великолепная работа! Не тонковато ли стекло ?

@lewiemcneely9143 Ай бұрын

Work used to bedone like that here till peoiple got modern and thought they were too good to do it that way any more. WONDERFUL job!

@hydraulichands Ай бұрын

Exactly! There’s something inspiring about the old-school ways of doing things-pure skill and hands-on effort. Wonderful job indeed

@lewiemcneely9143 Ай бұрын

@@hydraulichands Just shows a computer is NOT necessary! Just hard work!

@eduardofigueroa3443 28 күн бұрын

Excelente trabajo maestros

@lewiemcneely9143 28 күн бұрын

@@eduardofigueroa3443 SI!

@blk77sunshn 7 күн бұрын

Ya, that's right WHO NEEDS 10 FINGERS OR 10 TOES OR TWO EYES, mmmm maybe still be able to hear that bus just before it splatters your brains on the road !!! Ya, I like their way of working. Smh....

@MsRazvan29 Ай бұрын

❤❤💪Respekt Meister ❤

@DoanHoang-v5l 19 күн бұрын

Thực sự tôi nể tay nghề của các thợ Pakistan và ấn Độ họ rất giỏi

@philiphorner31 Ай бұрын

THERE'S A GUY ACTUALLY WEARING GLOVES.

@Mark.Brandenburg Ай бұрын

Steel toed bathroom slippers?

@raymondrobertson3869 Ай бұрын

No preheat --grinding after bearings still exposed. Unbelievable and saddles. 🤔 god help us

@ozzylion130 20 сағат бұрын

Me sorprende el poco o nulo nivel de seguridad!! 😱 y eso que en Mexico no es primer mundo!!

@geoffreycodnett6570 Ай бұрын

If you're given a set of blueprints and asked to tender for making it you do exactly that. Your job isn't to redesign the object and probably you don't know what its job is.

@b2dmastersniper 26 күн бұрын

I guess steel is so cheap over there, that they would rather throw 3" thick blocks everywhere rather than do some weld prep and achieve some actual weld penetration.

@martinleska4292 Ай бұрын

Two 5+cm metal plates welded together without any edge chamfering and no gap only with single path of electrode is joke. This transmission weight 10 tons and can be made with only 20% of material with proper drawings, little bit of calculations and optimalization from 2cm steel plates and proper bearing housings. Iam still surprised by fact they are able to move this heavy anchor from their workshop.

@rockerpat1085 Ай бұрын

I Have The Same Issues With This!!! Although I Like Things Built Extra Thick, The Lack Of Any Bevels At The Welds Is Quite Alarming!!! There's Literally No Weld Penetration!!! I Guess It Stays Together By Sheer Weight Alone!!!

@XxLeCaptainxX Ай бұрын

Classic engineer response. You can make it 20 percent lighter according to what? You don't even have the print. Is this a fair thing to say when you don't know the environment the transmission will be operating in, or the material used for the part?

@emilchouster787 Ай бұрын

Cargo cult. They copied the design of a gearbox and made a "nonfunctional" knockoff. What's the purpose of 4" thick reinforcing plates if the working part is a weld joint with 1/4" penetration at best?

@anonemous1046 Ай бұрын

One of the best comments here with no mention of the sandals. No bevels equals surface welding. What's the point of the thick plates then? And I agree. With a few hours of work on the drawing board, they could cut the weight down by 80%! 😂

@DGAWDGAW Ай бұрын

I guess that they apply the rule “ in case of d0ubt build it stout”. But yes, I wonder how log will those weldings stand.

@prakashparmar3935 21 күн бұрын

Very good job

@jiggidyjam Ай бұрын

A piece of possibly warped wood for a straight edge. You can’t make this up

@leerod6467 Ай бұрын

Shouldn’t you finish your welding first and then machine the surface so warping doesn’t occur for a precision fit.

@freddykoehler7118 Ай бұрын

Gute Arbeit 😊😊

@bernardcooke Ай бұрын

great use of the steel toe nail safety flip flops they never realy took off in england.

@rashidzaidi5211 17 күн бұрын

Making fun of it is easy. This is a poor country with a tremendous work force. Hard working intelligent yet they have to feed their families. Flip flops as the temps are over a 100F mist of the year. They make from the hottest jet fighter in the world today to anything you can imagine. So please be kind in your condescending comments. This is Pakistan

@geoffreycodnett6570 Ай бұрын

Well done fellas. First production Wizz Wam for grinding smoke built in Pakistan. 😂

@SunaryoYoyok-xo5yy Ай бұрын

Pekerja tangguh Saya pernah menggalaminya

@АлександрБукин-м6м Ай бұрын

Варят без защиты и похрену мороз. Жестяк мля.

@hepiyarto7601 Ай бұрын

👍👍👍👍👍👍👍

@ivantinepollon1553 Ай бұрын

São tão profissionais quanto doidos, volta e meia sai chacoalhando as mãos doloridas.

@SunaryoYoyok-xo5yy Ай бұрын

Benar benar hasil karya yg 👍👍👍👍

@sadikalisaiyed6280 Ай бұрын

Please show the heavy item how it upload in transport . It will be amazing.

@myview1875 Ай бұрын

In the west it would take a machine engineering shop 75 days to work out what brand of coffee to have before they even put pen to paper to design this thing. 😆.

@norbertnagy5514 Ай бұрын

and how do you know how many days it took to desgin this transmission

@myview1875 Ай бұрын

@@norbertnagy5514 ..

@djr2078 Ай бұрын

Easy to tell you’re a third world person. The West is drinking coffee while their computer model creates the design. Good try though

@thweethtoo Ай бұрын

Really? They goes to the moon dude.

@metaparcel Ай бұрын

I'm embarrassed for you.

@ilkerturkmen3008 Ай бұрын

MAŞALLAH TEBAREKALLAH

@user-mx2ll9mm1s Ай бұрын

Прекрасная работа! Есть у них чертежи или они по памяти это делают когда им показывали как это выглядит?

@German_1984 21 күн бұрын

На первых кадрах у размечающего в руке был чертёж

@Shirl15239 Ай бұрын

With all that stuff on everything how do they get anything plumb they put everything in the dirt and what ever

@ranamazharhussain9097 Ай бұрын

a great job if done with drawings and dimensions, a lot of time could have been saved

@timbosscher1600 Ай бұрын

Respect from🇭🇲🇭🇲🇭🇲🫡🫡🫡

@harpalsinghgaidu9658 6 күн бұрын

Factory kha par h Gaer kine Rupiye ka h

@Gus1966-c9o Ай бұрын

Maybe start up a go fund me for some safety sandals .

@MuliadiMuliadi-z7x 13 күн бұрын

The machine for what?

@TeddyBear-lb9ho Ай бұрын

What is this transmission used for?

@hydraulichands Ай бұрын

It is used in steel mill, to run the other machinery

@3554ELM 14 күн бұрын

Are they making a box to store tea?

@Shirl15239 Ай бұрын

Again No washers

@hausmut 5 күн бұрын

52:50, nejste kluci z česka?

@ziyasahin8211 24 күн бұрын

Dişli kutusunun bitmiş hali boş ağırlığı kaç kilo

@3554ELM 14 күн бұрын

Too many bosses.

@Коля-ж7й9э Ай бұрын

Я всё понимаю кроме одного, зачем на самой крышке этого редуктора, много лишнего металла, ведь на ней ни какой нагрузки нет? Я понимаю нижняя, на ней вся тяжесть и напруга, а верхняя? Я так понимаю, наверное для красоты, и для тяжести. Ведь на редуктор никогда ничего не ставится. Короче ни какой экономии, лиж бы что нибудь слепить. А так в общем молодцы.

@salehmirza8416 4 күн бұрын

This is done so that the entire gearbox body is strong and the gear body does not change its position or become distorted due to the force of the gear.

@sadikalisaiyed6280 Ай бұрын

Do you clean the factory once in a year ???????? Strange!

@eleghari 17 күн бұрын

Never! 🤭

@rashidratta4921 14 күн бұрын

This firm should be heavily fined. These poor guys are without protections . They are nude , working, like a mad guys. How , it's possible, that the authorities did not take notice of this dangerous job .