Here you will find hydro dipping with marbu paints. Super fun video kzbin.info/www/bejne/h3fPY4qjeb1_d6s
@shellyswift21973 жыл бұрын
Thanks for the tutorial! I just got these!
@laurabrey31285 ай бұрын
Do u base coat the tumbler first with the white spray paint?
@nancywebb33344 жыл бұрын
These are by far the best hydrodips I have seen.
@RebeccaEscott4 жыл бұрын
That means so much to! Thank you so much ❤️
@annagodfrey46894 жыл бұрын
Love both of these!!! I have yet to get a good hydro dip. My paint always clumps up before I dip my cup. Wondering if my water is to cold. I couldn’t help but laugh about the lawn mower. By the way I have a neighbor who gets on his lawn mower 7 days a week rain or sunshine 😂
@RebeccaEscott4 жыл бұрын
Anna Godfrey Lmao, right. Any other time no lawn mower. Hahaha
@zelchamaxwell29354 жыл бұрын
Girl....that turned out too freaking pretty!!!
@RebeccaEscott4 жыл бұрын
Zelcha Maxwell Thank you so much ❤️
@gourdhead222 жыл бұрын
Amazing. Both so awesome. Nice job. hugs Sheryl 💙🎨💙
@RebeccaEscott2 жыл бұрын
Thank you so much Sheryl
@kaybryant79873 жыл бұрын
That is a beautiful cup
@RebeccaEscott3 жыл бұрын
Thank you so much ♥️♥️
@HelloImAru4 жыл бұрын
This one is my favorite and I'm so jealous that I can't get my hydrodips to look this good!
@RebeccaEscott4 жыл бұрын
Peachfaced Just keep practicing, one day you’re just going to get it and you’ll love it ❤️
@user-kq1dd7cx1g4 жыл бұрын
Saw this video and I had to subscribe
@RebeccaEscott4 жыл бұрын
L Awww, Thank you so much and welcome ❤️
@TheBarrelRacer1014 жыл бұрын
This cup is gorgeous!!!
@artasheabatts76394 жыл бұрын
Absolutely beautiful!!! 😍😍😍😍😍
@RebeccaEscott4 жыл бұрын
Artashea Batts Thank you so much ❤️
@Craftybowladychannel2 жыл бұрын
This is the best video on this! What is done to prep the tumbler?
@TheCoulette3 жыл бұрын
Omg!! That’s so pretty!!
@RebeccaEscott3 жыл бұрын
That’s so sweet, thank you so much❤️
@jasminefarr15724 жыл бұрын
Yes that cup was beautiful!!!!!! Omgggggg amazing
@RebeccaEscott4 жыл бұрын
Jasmine Farr Thank you so much ❤️
@KHerget744 жыл бұрын
Absolutely stunning ❤️❤️❤️❤️
@RebeccaEscott4 жыл бұрын
Thank you so much, I am sorry for my delayed response as I wasnt aware until recently that I was not getting all my question and comment notifications.
@TREWHIT14 жыл бұрын
Did you know that if you use clear spray paint also it'll help separate the colors some?
@RebeccaEscott4 жыл бұрын
TREW HIT No I didn’t know that, that’s awesome. Thank you so much for the tip and I’ll be sure to try that. ❤️
@kaybryant79873 жыл бұрын
Can you use any spray paint
@RebeccaEscott3 жыл бұрын
Yes but my favorite brand is Rustoleum
@cecegilbert Жыл бұрын
How do you protect the paint?
@BeBaBoO173 жыл бұрын
What if you glitter the cup first and then do the dip is it possible 🤔
@RebeccaEscott3 жыл бұрын
Its possible and with beautiful results, kzbin.info/www/bejne/pmW8ip1qgK2Bm9k Merry Christmas & Happy Holidays
@BigCatSurff4 жыл бұрын
I’m going to use your tutorial for my skateboard! Idk how I got here lol
@RebeccaEscott4 жыл бұрын
I think that is so cool please let me know how it worked.
@stefaniegodfrey61553 жыл бұрын
It must be the prepping how did u prep your object first
@treasuresbyivyjade3 жыл бұрын
I love your Chanel I have 2?’s what do you do about the paint inside the tumbler? and How do you get all the bubbles popped
@RebeccaEscott3 жыл бұрын
Thank you so much, Paint will get inside the cup when doing this method and to clean it, I just use acetone and a mr. clean eraser and it cleans right up. To pop most as I can never get all I use a heat gun to push off as much of the remaining water as possible. I hope I was able to answer your questions and let me know if you have any others and anything I can help you with.
@savannahterry46562 жыл бұрын
I watch so many videos on here and everyone's looks so pretty. But every time I do it the paint clumps up on my cup before I can even get it fully submerged in the water. Am I going to slow when I dip it or what??
@julieelliott31814 жыл бұрын
Beautiful!
@RebeccaEscott4 жыл бұрын
Julie Elliott Thank you so much ❤️
@maxtahn4 жыл бұрын
Omg thats so pretty!
@RebeccaEscott4 жыл бұрын
maxtahn Thank you so much ❤️
@susanamarin73422 жыл бұрын
Hi was that water?
@RebeccaEscott2 жыл бұрын
In the bucket yes, full and then spray your paints into the water and give a gentle stir and then dip. Such and fun affect with tumblers.
@sherri1018014 жыл бұрын
I'm wondering if these are regular water tumblers? How do you get the paint from going into the cup? What are you using to hold the cup for dipping? What do you do after the paint drys? Can you use a plastic tumbler instead? Can you wash these in the dishwasher or hand wash? Safe for drinking out of or used for something else instead?
@RebeccaEscott4 жыл бұрын
Craig's mom I don’t worry to much about the paint getting inside I just clean them with acetone when I’m done, I use my football holders to dip them, once the paint dries I epoxy they don’t have to be sealed. Yes I’m sure plastic cups are okay to dip, These cups need to only be hand washed. These are definitely safe to drink from. I hope I answered your questions, let me know if you have anything more I can help you with. ❤️
@daniellegonzales93672 жыл бұрын
Did you seal after dipping and before applying epoxy? If so, how long did the seal dry before epoxy?
@RebeccaEscott2 жыл бұрын
I do not believe I did however you most definitely can seal them prior to epoxy, usually in about 30 mins or so or when you know your clear seal is fully dry you can epoxy.
@LaLaReiNa814 жыл бұрын
What colors was those?
@RebeccaEscott4 жыл бұрын
WIthout watching the video, I don't recall. Im sorry
@alissaperry42104 жыл бұрын
Do metallic colors dry quickly? My first attempt was an epic fail. Lol. I used pinks, grey and metallic rose gold. I dipped and globs of paint was stuck to my tumbler. Tried again minus the metallic and it looked great. Actually let’s rephrase that. I gave it a 2nd try same colors. Swirled with plastic fork and it clumped up. Cleaned that and left metallic out. Worked like magic. Any tips?
@RebeccaEscott4 жыл бұрын
Oh yeah, metallics can be super, super tricky I dont have any real tips on those.
@wifeyfew17284 жыл бұрын
Hey, do you use any spray paint? When you prime the tumblers can I use the paint & primer spray? Also how can I add glitter to it?
@RebeccaEscott4 жыл бұрын
Yes, I use any brand to hydro dip, though the metallic spray paints can be very tricking in the water, I've never tried with paint and primer combined, couldn't hurt to see if it works. You can not add glitter to the water but you can use epoxy glitter additives for a final coat and the whole cup will sparkle.
@taygansepulveda453 жыл бұрын
How long so you have to let it dry before epoxy
@stirer14 жыл бұрын
Love the video , I’m just wondering how do you stop the paint from going inside the cup and can this be done with a tumbler with a handle pls
@RebeccaEscott4 жыл бұрын
I can't stop the paint from getting inside because of the way I dip my cups, This can defiantly be done with a handled cup.
@saltlifegaming93244 жыл бұрын
@@RebeccaEscott how do you clean the inside of your cups? I tried this and now I have paint all in the inside?
@RebeccaEscott4 жыл бұрын
@@saltlifegaming9324 I use a magic eraser as well as acetone to remove any paint.
@saltlifegaming93244 жыл бұрын
@@RebeccaEscott I have one from Dollar Tree that has a plastic ring around the bottom and top, Acetone will probably destroy it?
@tulsametrorealtor9184 жыл бұрын
Is that water in the bucket? What did you do to prep?
@RebeccaEscott4 жыл бұрын
Yes, its just a 5 gallon bucket that I use to dip, I dont really do anything to prep other then apply a base coat to the tumbler.
@hopebarker45873 жыл бұрын
I just watched your tutorial but I'm confused on what to do after dipping. Do I let it dry upside down or on the turner? How do I clean the inside of the cup? Does the outside need sanded before epoxied?
@RebeccaEscott3 жыл бұрын
I just leave the tumbler to dry upside down, once you epoxy the tumbler then you clean the rim, these were painted with fresh paint so no they were not sanded.
@uhleeshuh1884 жыл бұрын
When you epoxy over it can you see the air bubbles? If not turn what do you doing to get rid of them?
@RebeccaEscott4 жыл бұрын
Alicia Rust All bubbles from water are gone by the time I Epoxy as one way or the other they have dried.
@krazjays4209qdd4 жыл бұрын
These came out absolutely fantastic! Prettiest dips I have seen yet! Now, how much gets inside the cup & is it easy to remove? Do you just use acetone?
@RebeccaEscott4 жыл бұрын
krazjays4209qdd It’s not to bad, but yes easy clean up with acetone, soap and water ❤️
@nancywebb33344 жыл бұрын
There's a new thing you can get called Tumbler Shields that keeps the paint from getting inside
@RebeccaEscott4 жыл бұрын
@@nancywebb3334 I had no idea, Thank you so much for the tip. When I get them, I will be sure to give you a shout out for having made the suggestion. Its greatly appreciated.
@annagodfrey46894 жыл бұрын
Nancy Webb thank you so much for sharing that!!! I just looked them up. Question for you- are the silicone shields to prevent epoxy from getting in your cups? And the hydro lid added to that is for hydro dipping?
@nancywebb33344 жыл бұрын
Anna Godfrey yes. They have a Facebook group “Tumbler Shields”. They have different tutorials on there
@sherellehutcheson24374 жыл бұрын
Do you put them on the turner to dry?
@RebeccaEscott4 жыл бұрын
Sherelle Hutcheson I usually put them on a dry rack for a couple hrs. But a turner would work too.
@shakiraanderson85024 жыл бұрын
Hi!!! What are the steps for preparing your cup before dipping?
@RebeccaEscott4 жыл бұрын
Other then my base coat, absolutely nothing.
@kamerynk3 жыл бұрын
@@RebeccaEscott what do you mean by base coat?
@allaboutus854 жыл бұрын
Do you seal these?
@RebeccaEscott4 жыл бұрын
Ashley Davis No these hydro dips don’t have to be sealed prior to epoxy.
@pamelastellfox12934 жыл бұрын
Gorgeous! What temp water did you use and about how far are you spraying?
@RebeccaEscott4 жыл бұрын
Pamela Stellfox I let my Water-hose water try and cool before spraying into my buckets and I never hydro dip in direct sunlight and I would say I spray fairly close to my water.
@TheSewingBaddie3 жыл бұрын
I hydro dipped mine but I had too many bubbles is there a fix ??
@RebeccaEscott3 жыл бұрын
I just pop it really hard on my deck to rid most of the bubbles, and then I use a heat gun to push of any remaining water.
@TheSewingBaddie3 жыл бұрын
@@RebeccaEscott thank you I’ll have to try it I wasn’t sure if I could use a heat gun on spray paint I didn’t know if it could be toxic ? And thank you for taking the time to reply back !! 💕
@RebeccaEscott3 жыл бұрын
@@TheSewingBaddie Absolutely, when using heat, you wanna move quick so you don’t burn the paint so you should never be smelling the paint if so it’s most likely burned and that would not be good.
@marcijones6934 жыл бұрын
Could Mod podge or polycrylic be used instead of epoxy? These are stunninggggg
@RebeccaEscott4 жыл бұрын
marci jones Not for a long term use. Epoxy is the best sealer bc it’s fda approved and if the cup is cared for the right way they will last years.
@wileycovington44974 жыл бұрын
Use Crystalac. It's nontoxic.
@RebeccaEscott4 жыл бұрын
@@wileycovington4497 Im actually thinking about testing this product.
@wileycovington44974 жыл бұрын
I love Crystalac. I've never used epoxy because of all of the allergy warnings. I couldn't take the risk. I do my cups right in our bedroom before we go to sleep.
@mistynoble15324 жыл бұрын
I have a couple questions do you need to seal it with anything? And will vinyl stick to it afterwards? Also how do they hold up? Are they hand wash only?
@RebeccaEscott4 жыл бұрын
misty noble No these were done with spray paints so no need to seal, I would recommend a thin coat of epoxy before decals. These cups hold up very well and yes they are hand wash only.
@jennifertristan45664 жыл бұрын
So I tried one this weekend and did same way but had lots of air bubbles , I did see that you say they go away but they look like gory bubbles do those away and if so how long do you let the cup dry for ?
@RebeccaEscott4 жыл бұрын
jennifer tristan It doesn’t usually take to long to dry, If they are real bad they are not likely to go away.
@bribri80424 жыл бұрын
Hey Jennifer. I’m trying my hand at hydro dipping, too. Did you find a way to eliminate/reduce air bubbles? I’m using a heat torch, too, and nothing seems to help.
@melissanoe29804 жыл бұрын
Wow!!!!
@TheRodriguezFam4 жыл бұрын
The paints were they gloss non gloss like what do you recommend. These came out stunning I just did my first two and it is so addicting lol but that gold and gum drop 😍
@RebeccaEscott4 жыл бұрын
The Rodriguez Fam Tbh they could have been a mix I know the gum drop is a gloss. I’m sorry I don’t have all the answers as to which was which. They are super addicting ❤️
@TheRodriguezFam4 жыл бұрын
Creative Vinyl Designs By Rebecca Escott appreciate the response. I’m just trying to see if it matters with gloss or without. 🤷🏼♀️ lol my husband going have to make a shelf for me lol just for paint haha. Xoxox
@RebeccaEscott4 жыл бұрын
The Rodriguez Fam Oh yes lol the shelves you’ll soon see will be mandatory lmao, idk if it makes a difference but now that you mention it I’m curious. ❤️
@TheRodriguezFam4 жыл бұрын
Creative Vinyl Designs By Rebecca Escott haha thanks love 💕 happy crafting 🙏🏼
@maxtahn4 жыл бұрын
Did the bubbles eventually pop?
@RebeccaEscott4 жыл бұрын
maxtahn Yes, for the most part they did.
@maxtahn4 жыл бұрын
Wow, that’s just beautiful. Thank you for replying.
@RebeccaEscott4 жыл бұрын
maxtahn You are most welcome, thank you for watching ❤️
@CathyFleming-z5x2 ай бұрын
Hey can u show me how to do Red and blue cup for a little boy
@RebeccaEscott2 ай бұрын
@@CathyFleming-z5x Oh yes I have tons of these style designs (Hydro Dipping) on my channel,
@yaridance124 жыл бұрын
What would you do if you don’t have a heat torch?
@RebeccaEscott4 жыл бұрын
Yaritza Rodriguez I would use a blow dryer, it’s purpose is to just help push away the excess water.
@msbrown516114 жыл бұрын
How do you stop the colors from getting on the inside of the cup
@RebeccaEscott4 жыл бұрын
Keke Brown I don’t really prevent the paints from getting inside, so I do have to clean it with acetone and then soap and water.
@kristenmitchell73054 жыл бұрын
What temperature is the water? Does it matter if it’s cold or warm?
@RebeccaEscott4 жыл бұрын
Kristen Mitchell My water was cold, cold water is better in my opinion ❤️
@dmyna_damayana20654 жыл бұрын
Did u use hair dryer in the end?
@RebeccaEscott4 жыл бұрын
Its Dammayana I used a heat gun very very carefully just help blow off the extra water drips.
@angeliquemarquez44414 жыл бұрын
Did u prep tumbler first w black or was it black already? Where do u get ur tumblers? I want to try this. 😁
@RebeccaEscott4 жыл бұрын
Angelique Marquez I painted both cups one black and one white, I purchase all my tumblers now from Marshall Made Tumblers and More.
@heatherwiklund63574 жыл бұрын
Where did you find the gumball paint ?!
@RebeccaEscott4 жыл бұрын
Walmart or Home Depot, cant recall which one.
@SavanhaAndStacie4 жыл бұрын
How did you prep your cup!
@RebeccaEscott4 жыл бұрын
I wipe them down with rubbing alcohol and then I paint. ❤️
@reneerueppel73702 жыл бұрын
It looks like the water and paint gets into the tumbler. How do you clean it up so people can drink out of it?
@RebeccaEscott2 жыл бұрын
I use acetone and a mr. clean eraser to clean the rim and then wash very well with hot soapy water.
@ashleym69834 жыл бұрын
Does the tumbler texture matter? I’m seeing a lot of sublimation tumblers and am nervous they may be too smooth?
@RebeccaEscott4 жыл бұрын
Ashley M Im sorry I’m not sure what you mean.
@ashleym69834 жыл бұрын
I’m trying to order some tumblers for marbling, but everyone I see looks shiny as if it’s epoxied or just super smooth. I’m nervous the marbling won’t grab onto it. Sorry I’m sure I’m not explaining it right
@jayschwartz34404 жыл бұрын
Ashley M typically they put a base coat on the cups white or black sometimes even clear
@MEM20224 жыл бұрын
how do you clean the inside?
@RebeccaEscott4 жыл бұрын
Mirna Montano I just acetone to clean it up.
@jerritanner2752 жыл бұрын
I get big ol’ paint boogers when I use a skewer. How do you avoid that?
@RebeccaEscott2 жыл бұрын
Maybe try a stick or even an old straw maybe to help swirl the paints, sometimes it’s hard to avoid them when using metallic paints. Also this technique is best done out of direct sunlight this can help insure that your water isn’t to hot, so your paints don’t freeze up when they hit the water. I really hope this makes since.
@jerritanner2752 жыл бұрын
@@RebeccaEscott yes, it does. I was using metallics. Ty!
@RebeccaEscott2 жыл бұрын
@@jerritanner275 Ok that could be part of the issue, try again but see if in the shade helps and if the water is a little cooler that should also help. Please keep me posted ok.
@itsskayylaa4 жыл бұрын
But how do you prep the cup?
@RebeccaEscott4 жыл бұрын
Kayla Marie Clean it with just alcohol, I do not sand
@kevinklein82314 жыл бұрын
So I wanted to try just your basic black & white marble look. Is there specific paints (spray paints) to use for this? As when I tried it, the paint I had created what looked like oil bubbles in the water which turned the “swirls” into smudged circles/bubbles, ONLY SMUDGE BUBBLES........ any suggestions would help drastically
@RebeccaEscott4 жыл бұрын
Kevin Klein Yes, so in my experience with these hydro dips, don’t use hot water and if at all possible keep your bucket in the shade. Also I used both Krylon and rustoleum to achieve this effect. I really hope this helps.
@katiehassell12994 жыл бұрын
What are you using to hold the tumbler while you dip? It seems like the perfect size!
@RebeccaEscott4 жыл бұрын
Katie Hassell Large football attached to my pole, and yes it works very well.
@BeBaBoO173 жыл бұрын
So what about the bubbles ?
@kokopellicodcs34993 жыл бұрын
I can NEVER mix my paints without it wrapping around my stick using a very thin stick, toothpick or popsicle stick. Have ANY idea WHY this could be happening?
@wileycovington44974 жыл бұрын
My hydrodips have been messy. Lol!!
@RebeccaEscott4 жыл бұрын
Im sorry to hear that, keep practicing you'll get it I promise.
@kennanlukacs4 жыл бұрын
Do you seal these?
@RebeccaEscott4 жыл бұрын
Kennan Lukacs No once they are dry I apply the epoxy.