Hyper Tough 12 Volt Inflator | Test and Compare with Skil PwrCore 12 Inflator

Рет қаралды 4,496

Күн бұрын

Пікірлер: 63

@SecurityZone1 21 күн бұрын

Ever since i ordered the Brushless impact wrench i fell in love with all the 12v max tools I ordered the Air inflator, the long reach ratchet and an extra 6.0ah battery, i love the fact that each tool comes with a 1.5ah battery and the fact that you can use the 4.0 and 6.0 on all the tools as well very affordable and very reliable I haven't had ANY issues with any of the 12v Max Hyper Tough Tools 👍🏽

@FacilitiesDIY 2 ай бұрын

Love the in depth testing. And love cheap good tools. Don’t need to break the bank always to get the job done 30 seconds faster on things like this.

@zacksintheshop 2 ай бұрын

Thank you for watching and commenting

@justinhawk2003 Ай бұрын

You are the best reviewer on UTube - period! Amazing how many reviews leave out the very points that are Most important. You rock buddy!

@zacksintheshop Ай бұрын

Thanks, means a lot.

@Lyle-1999 2 ай бұрын

I have the HT 12v inflator and I enjoy it. Super handy.

@grandprixuse 2 ай бұрын

I wish you would have used same capacity batteries, voltage sag gave the ht a handicap in all of these tests, otherwise great work!

@zacksintheshop 2 ай бұрын

Just added some short content to address your comment. Thanks! Hyper Tough12 Volt Inflator | Tested with every battery #hypertough #powertools #toolreview kzbin.infoizup0nASIek?feature=share

@brenthann2623 2 ай бұрын

i had the hyper tough inflator. i tried it on my pick up that runs 60/80 psi. it would hit the 80 psi but took for ever to fill the last 10 psi. i returned it. then i watched project farm and it did just as well as dewalt and milwaukee.

@zacksintheshop 2 ай бұрын

Yeah, it looks like to me that a bigger gap form between the hyper tough, and the skill whenever the pressure got higher

@keysautorepair6038 2 ай бұрын

That skill looks like the Milwaukee 12v.

@zacksintheshop 2 ай бұрын

That’s exactly what I thought when I saw it the first time

@shepshomestead 2 ай бұрын

Great stuff man 👍

@zacksintheshop 2 ай бұрын

Thanks man, appreciate you watching

@chrishoward4017 2 ай бұрын

I have the 12 volt skil love the 13 volt line happy with every tool , but I think hyper tough looks really good too !

@SGAOuTLaWz 2 ай бұрын

I have the 12v Skil Inflator - works great.

@zacksintheshop 2 ай бұрын

Thanks for watching. I like the Skil as well.

@ssiven Ай бұрын

I may have to pick up the Skil. In my opinion you gave the weight of the inflator a bit too much "weight".

@FahimibnDawud 2 ай бұрын

Hyper Tough is on the come-up! They have 36" pry bars made by Wilde for $20, a double set of mini pry bars made by Mayhew, and the only difference is my Mayhew ones have red handles. There are also rumors that their new impacts are made by a Chinese company who makes a lot of TTI stuff! They also have things like brass punhc set, impact sockets, etc.. I bought their long neck 3/8" electric ratchet to compare to my 2 Milwaukees and i can assure you that it is nearly the same quality! Its unfortunate that many can't see past their $100k debt which they accumulated on the tool trucks, to see that "good" tools dont have to be exorbitantly expensive.

@zacksintheshop 2 ай бұрын

That’s pretty cool info, thanks.

@SGAOuTLaWz 2 ай бұрын

Test the lights next please. The new Hyper Tough light is supposed to be comparable to the M12 Rover.

@zacksintheshop 2 ай бұрын

Yes, I will get to the lights soon. Thanks for commenting

@OrificeJohnson 2 ай бұрын

Have used both extensively, and they're really a 1a 1b light depending on the job. As for differences, the Rover has a charge port, displays remaining battery, much stronger magnets, much warmer tint, and 2 less overall LEDs than the HT. The HT has 2 more LEDs, the ability to mount on a tripod, significantly cooler tint, has a hook, and is much more compact. The UI's of the lights are essentially the same, but the HT has a flashing mode that I have only found to be annoying. I also don't see a very significant difference in their throw or flood, even though the HT should have a more condensed beam. This could also be due to the HT being cooler. They're very different lights when it comes to actually lighting stuff up because of the way they move. The rover can move it's light left to right, while the hyper tough moves from front to back. I've found that the hyper tough is actually far more versatile when it comes to lighting, and I believe that's where it really stands out. With the hook, you can place it in way more places than you can with the rover to get a far better lighting setup, such as hooking it onto the grab handles in a car. The rover has to be placed on it's side to light cars similarly, and it still has a pretty restrictive range of motion. The HT on it's back can be a bit wobbly, but it can send light straight ahead and position in a few different angles to really get it where you need it to go. It works very well when under a vehicle to light up everything, whereas it can be a challenge to get the rover to do things in the same manner. I have only used the HT once on a tripod, I haven't found a good use for that just yet. Might consider making a square plate that screws into the insert with some really strong magnets. As for build quality, the rover wins handily. I don't believe the HT light will survive what i've put my rover through, simply because of how the pivot for the light works. I also really wish the HT had a battery indicator somewhere, not having one is a pain. The magnets on the HT are also nowhere near the strength as they are on the rover, and is probably my biggest complaint. Small bumps can send this light flying. Overall, considering the HT is less than half the price of the rover with a battery and charger, there's not really a reason to buy a rover. You can buy 2 of the HT light for cheaper than 1 rover, and have way more light coverage than the rover would ever be able to put out.

@FahimibnDawud 2 ай бұрын

@OrificeJohnson thanks for that man!

@jurj97 2 ай бұрын

I wanted to like the hyper tough 12v line but I've begun to switch to the Skil 12v family. I replaced my HT impact driver that I broke with a Skil from Lowe's since it was on sale, and I like it so much more

@zacksintheshop 2 ай бұрын

The skill line is at least as good value as the hyper tough maybe more on some of the products. The skill impact driver and drill are more equal to the Milwaukee M2 in power. That’s with them costing a fraction of the Milwaukee.

@harrydickson4575 2 ай бұрын

Nice job 👍👍

@zacksintheshop 2 ай бұрын

Thanks Harry

@Arctic5fox 2 ай бұрын

After using the Milwaukee M12. All my other inflators are collecting dust now.

@zacksintheshop 2 ай бұрын

I’ll definitely include the Milwaukee in the future

@kalybnielsen4183 2 ай бұрын

I liked the 12v stuff, makes me mad about Craftsman, I have and still use a bunch of my Nextec stuff, I didn't get either inflator though. The 12v stuff is more than adequate for the majority of people. The Hyper Tough stuff definitely looks like a really good purchase, good power, a great lineup and good pricing

@zacksintheshop 2 ай бұрын

Hyper Tough is a nice value. I remember the old craftsman stuff. You’re right. 12 volt tools are enough for most household and even pro projects. In my shop I use 12 volt as much as anything else.

@Brysonandmason320 2 ай бұрын

Take note the HT done almost the same PSI as the skil with 1.5ah battery versus a 2.0ah on the skill and don’t be fooled that .5ah makes a big difference

@zacksintheshop 2 ай бұрын

Yes, with the amount of power it takes for these to pump up a tire. For example, it would’ve been nice to include at least two amp hour battery.

@Xaluber 2 ай бұрын

Oh I didn't know you were looking at testing the Bauer ratchet. That'd be interesting to see.

@zacksintheshop 2 ай бұрын

Absolutely, I like checking out the new stuff from Harbor Freight.

@EmmanuelA1 2 ай бұрын

Hyper Tough is the #2 power tool brand, FLEX is the only company out doing them lol. Can you please do a review of the Hyper Tough 12V laser level? Also, we get a formal Hyper Tough Mid Torque impact wrench review?

@zacksintheshop 2 ай бұрын

Yes, I will do a mid torque review. As funds come available I am upgrading my hydraulic test rig so it can withstand the torque.

@EmmanuelA1 2 ай бұрын

@@zacksintheshop Yes sir, thanks Zack!

@ksong1496 2 ай бұрын

Good comparison. but I think the price difference affects way too little in the final score. IMO, relative score doesn't work really well and maybe there should be some better way. As of now, in order to make those scores even just by the price alone, Skil should be $148 and Hyper Tough should be $12. In this way, the scores will be even at 416. But, if there is such big difference in price (12x), while not-so-big difference in performance, I think anyone would think HT is way better, even though your score is even. By the way, I have that LED light (one in the middle) and it was pretty good. Back side has magnet. so I attached it under the hood of the car when I was working on my friend's car. After two hours of work, 1.5Ah battery that came with it had almost no battery, so I think it lasts about 2 or 2.5 hours. Not bad.

@zacksintheshop 2 ай бұрын

Thanks for the comments. I agree a non relative score may be in the works.

@jacksonchastain4220 2 ай бұрын

Mr Zack just so you know you don’t need to turn it on work the light to work just hit the button if you did not know now you do

@zacksintheshop 2 ай бұрын

Thanks, I figured that out after the video. That’s a good feature.

@jacksonchastain4220 2 ай бұрын

@ o yes sir

@P.Trim69 2 ай бұрын

Nice video s there doing good if they keep it up are they the best no are they priced good yes Sir

@zacksintheshop 2 ай бұрын

Yes they are. Thanks for watching.

@jacklo325 2 ай бұрын

Zack, i want that 12v light too..😂 Meanwhile, I wonder if the HT inflator would equal or beat skil with a 2, 4, or 6 ah battery? I have the m12 inflator, it doesn't have the light, a few years old, but i think its more solid than thIs HT. Recommend the m12 vs the skil, and maybe the HT with a high capacity battery. And can't wait for the grinder compo...

@zacksintheshop 2 ай бұрын

The video would’ve been too long if I included all the various batteries so I just left at the one it comes with. I may do a short just comparing the various batteries doing one task.

@jacklo325 2 ай бұрын

@zacksintheshop Also, I think the $43 price tag might a bit reaching. I have the ryobi PCL001B, which is very similar to the skil, and currently $30 at home depot...

@scottfirman 2 ай бұрын

I have taken some of these apart and found them to fail in a relatively short period. The inner workings are made of cheap materials that wear out prematurely. I had a Craftsman inflator that lasted 12 years and still ran when I sold it. The pump was similar to an airbrush compressor in construction. The piston was metal with rubber seals. I have seen hyper tough stuff. No quality once so ever. Save your money. A small pancake compressor is a better deal for the money. You can snag a good used, almost new one on Marketplace from time to time.

@zacksintheshop 2 ай бұрын

What are some of the worst things you found inside the Hyper Tough?

@P.Trim69 2 ай бұрын

Yes Sir

@chriscain7173 2 ай бұрын

Do you think using a 2 amp hyper tough battery would make a difference?

@fireinacan 2 ай бұрын

It's a bummer that HT included the 1.5 instead of 2 amp hour. I bet the scores would have been closer with the 2 amp hour

@zacksintheshop 2 ай бұрын

Just added a video to compare- Hyper Tough12 Volt Inflator | Tested with every battery #hypertough #powertools #toolreview kzbin.infoizup0nASIek?feature=share

@fireinacan 2 ай бұрын

@@zacksintheshop Nice! Just watched it. Thanks!

@MikeW-u4z 11 күн бұрын

Thank you! Looks like I am going to be buying some 6ah batteries.