Hyperspin Bartop Arcade

[@josefmarcame2theultimatevl106]

Amazing Big Top Box Arcade Machine Have A Good One Play Game Anymore…

[@ivansanchez68]

Amazing machine!

[@icecrush82]

Very nice

[@luismarcolino]

Great work. Love it! How do fix the monitor, since it doesn't have a VESA support? I'm with the same problem...

[@anetanel]

I took the base apart (about 15 screws) and used the little metal part that connect the base to the monitor. I screwed it to a piece of plywood. I also added a machine screw to the top of the bulge at the back. It is covered with rubber.

[@luismarcolino]

Thanks for you explanation. Do you have some pics? Other question: on the plywood layout you have "4.template", where did you use it? The back door and control panel are 490 mm, 10 mm less than the 500 mm. In the video those parts don't seem to have that difference... Did you use 490 or more?

[@anetanel]

There is a link to a dropbox album in the forum thread: www.dropbox.com/sc/3mgb881atgjd53l/AACg7RcyKQm69XhzeppPbfwRa The template is an extra side panel that I used to draw the two actual side panels. Later on I used it to flush trim the side panels with a router. Now I can (and did) use it in other builds. Initially I cut the back door to 500 mm but it was too tight. So I removed 5 mm from each side. It is hardly visible, but I used some white insulation foam on the inside of the door to give it a sealed look.

[@juandediosfigueroa7376]

amazing work! congratulations... what verison of hyperspin is it? ...

[@anetanel]

1.4

[@marcusthegame1]

Le petit boutons qui va bien...👍

[@juandediosfigueroa7376]

regards From mexico!

[@pinkspider28]

if its a pc, how did you get it to start up like that ?

[@anetanel]

Its a i5 6400 CPU with 8GB RAM, 120GB SSD drive for windows and 1TB drive for the games. To start Hyperspin (or any program) you change the default shell in the registry: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\Shell Change "explorer.exe" to the Hyperspin executable, or startup script.

[@damienndn3563]

Hi, Quick question : How is it to play with non analogic joystick for PS2 /GameCube /N64 games like mario galaxy ? Thanks

[@Happy-wb8gi]

How much do these cost?

[@pinkspider28]

hey there, are you running raspberry pi or on a pc?

[@luismarcolino]

Did you use audio speakers of 4 inch (10cm) or less?

[@anetanel]

Luis Marcolino i used a 2.5 inch 15w speakers.The cheapest i found on ebay ;). In my opinion it is loud enough.

[@cliffbeauchamp]

how do you fit a computer in there?is it a mini pc i dont see how you can fit all that in such a small space!nice work !

[@anetanel]

One easy option is to use a mini PC such as Intel's NUC (although I don't know how you would power it on..). But I simply used normal PC parts with a mini-ITX motherboard and managed to cram everything inside.

[@cliffbeauchamp]

thanks

[@krr7752]

@@anetanel do you build these still I would like to buy one

[@anetanel]

@@krr7752 I do, But I do not ship internationally. Only in Israel. Sorry.

[@Exillerating]

Do you have the arcade cabinet plans for this? If so would you mind sending them to me? :)

[@anetanel]

I've added a link in the description to the forum thread.

[@TheDeejay87]

Hi what computer specs you use ? very beautifull, need one :) And how did you config to start directly with hyperspin ?

[@anetanel]

Its a i5 6400 CPU with 8GB RAM, 120GB SSD drive for windows and 1TB drive for the games. To start Hyperspin (or any program) you change the default shell in the registry: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\Shell Change "explorer.exe" to the Hyperspin executable, or startup script.

[@TheDeejay87]

Thanks for the return :) No need to have a graphic card ? And about you screen ? I'm testing for the moment Hyperspin, but i have lot of games don't work

[@GizmoMaltese]

GPU?

[@TheDeejay87]

yes

[@anetanel]

I used the on-board graphic card. The Intel 530 chip is quite powerful, and runs everything rather smoothly, even with GLSL shaders. PS2 games are the only exception. They run pretty good but you get some visual glitches that I did not see with a Geforce card on another system. I don't think it is a matter of "power" such as a drivers issue. The screen is HP Pavilion 22cw. Whichever screen you choose, make sure its an IPS panel. TN panels have horrible viewing angles. Also, make sure that it has VESA mount option. My didn't have and it was a bit of a hassle to mount it.

[@juandediosfigueroa7376]

its your PDF layout ok? what number of cutting list is for back door? why are 2 pannels?

[@anetanel]

Juan de Dios Figueroa The plan is for 2 machines out of a single sheet of plywood.

[@theoniboi]

what admin buttons do you have on your layout? I'm build my first bartop with hyperspin. Going for 2player 6button setup with no front cp buttons. trying to keep up high from toddlers. Putting buttons in this order (1st player button, 1st select/coin) then center have 2 admins (??) then (2nd player button, 2nd select/coin).. what admin button should I put or combine buttons to make life easy? thank you

[@anetanel]

As you can see, I put 4 admin buttons, but its an overkill. I think you can get away with 2 buttons: Exit\Back & Pause. On another machine I used Player 1's first button as a Enter\Select button for HyperSpin.

[@theoniboi]

+Netanel Attali I need to wait for the xin MO USB to arrive

[@theoniboi]

+Netanel Attali I was thinking of doing a player1+player2 combo to escape. didn't want the Lil ones pressing back mistake

[@paramediccpo]

How much . I have one with old hyper spin , I want new hyper spin

[@Shbabom]

can you tell us what are buttons on front beside amplifier???

[@anetanel]

From left to right: Player 1 Coin, USB/Headphone, Menu Select (Enter), Esc, Settings (tab on mame, F1 on retroarch), Search, USB/Headphone, Player 2 Coin.

[@Shbabom]

Netanel Attali wow good. but i have questions how did u that? usb/headphones and player 1/2 coin ??

[@waleswideman1]

Do you know how to get the controls to load on project 64 when loading a rom I've been doing it manually

[@anetanel]

Wales Wideman Im using retroarch, not project 64.

[@sobrasadaboy]

monitor 22"?

[@hong10ly70]

How tall IS thé screen please? 19inch ?

[@anetanel]

21.5 inch

[@hong10ly70]

@@anetanel its a good size Screen to play 2 players

[@glam3803]

Can u buy it?

[@anetanel]

Only if you live in Israel. I don't ship internationally. Sorry :(

[@jonathangonzalez9759]

Where can I buy one I'm in need ? In the us tri state area

[@anetanel]

jonathan gonzalez Sorry man. I do this as a hobby, and i cant deal with international shipping (from Israel).

[@jonathangonzalez9759]

Netanel Attali i have friends that are go every year how much would it be in usd

[@anetanel]

jonathan gonzalez with a pc its about 2100$. with raspberry pi about 1500$.

[@gaelnokautt]

cuantos juegos vienen de ps2?

[@zoasvideogamesarcadetours5336]

hi. Where can I get one?

[@anetanel]

I built it myself. I recommend you try too :)

[@zoasvideogamesarcadetours5336]

Netanel Attali i would like to but i dont know where to start haha

[@anetanel]

I would recommend you browse through this site: forum.arcadecontrols.com. There is a pretty good wiki there, although it is currently offline. Also, there are many KZbin videos. Just look for "build arcade". You can even buy kits from guys like gameroomsolutions.com

[@zoasvideogamesarcadetours5336]

Thankyou very much nostalgic brother!

[@juandediosfigueroa7376]

what type of lcd it is?

[@anetanel]

HP 22CW: www8.hp.com/emea_middle_east/en/products/oas/product-detail.html?oid=7263983

[@juandediosfigueroa7376]

thx

[@wachinstudios6240]

hello man very good machine you could pass the hyperspin link I would appreciate very much greetings!

[@tommylira6229]

LINK PLEASE

[@TheDanielDreamer]

3:00 minutes of video is not even enough time to review a arcade with that many games.

[@Gazza642]

0:16 in......

[@fabioolivera126]

Worst Mario Bross gameplay...