Headers, cold air box, ecu flash, head port and polish and you will be done on the engine.
@ClunieGarage3 жыл бұрын
G'day Gary, you have read our minds. We will probably do headers next and then look at the air intake before we get a decent tune. We are also investigating a head shave to get more compression as well.
@danielzechariah72633 жыл бұрын
@@ClunieGarage I was thinking the same with the head shave. Shame these ecu’s can’t be fleshed, darn it.
@carspottersa3 жыл бұрын
Bolt on turbo 0.6 bar could be reliable and 150kw on 1.6l engine
@lauriedooker10312 жыл бұрын
@@carspottersa do you know or hope for 150 kw ? That’s double power output . Can ya buy a LSD for a Getz I wonder , lol.😀
@SIRSKITZ2 жыл бұрын
@@ClunieGarage might wanna check VTP clearances beforehand (if you haven't already since this vid was posted) these are interference engines and you may run in to some strife.
@tomreynolds57743 жыл бұрын
That sounds a bit better! Looking forward to seeing the Nuggetz on the track. Any plans for nascar livery like your ute?
@ClunieGarage3 жыл бұрын
G'day Tom, yes sounds better than stock that's for sure. No plans for stickers just yet but you never know!
@corrinaelliott77702 жыл бұрын
You should put a torbo in the gets and make it shoot fire
@ClunieGarage2 жыл бұрын
Now that's an idea although I think Frankie may have plans with a Nitrous bottle 😂
@IB6-UB93 жыл бұрын
All the power👍👍
@ClunieGarage3 жыл бұрын
You bet Steve! It is seriously slow and down on power but a good learning platform for the boy.
@IB6-UB93 жыл бұрын
@@ClunieGarage good learning platform for anyone wanting to find the quickest way around a track
@rtmpgt2 жыл бұрын
Not gonna lie Clunie that actually sounds pretty frickin' mint for a lil' nugget! Ever thought about hitting up RPW in WA for a Limited slip diff and some headers?
@ClunieGarage2 жыл бұрын
G'day mate, thanks for the tips on RPW. We aren't planning on spending too much more on the Getz at this stage. Apparently the only headers that fit are hand made ones.
@aussietruckphotosandmodels85103 жыл бұрын
Just bought a 1.4 16 valve twin cam Getz for my son to do Kahanacross and perhaps progress to gravel rally, with the option to do track if he's decides to go that way. We'll start doing the strip out, tow points, battery kill switch etc over the Christmas brake.. he doesn't need a roll bar at this stage, and they have to run on road tyres, with standard suspension in the junior class. Was considering extractors and flow through system but I'll have to have a closer look at the regs.
@ClunieGarage3 жыл бұрын
Sounds great mate and best of luck with everything. I have bought this Getz for my eldest boy to get into motorsport and learn how to fix things without wrecking his daily driver!
@Dylmark3 жыл бұрын
What a little turbo on this and call it a day
@ClunieGarage3 жыл бұрын
G'day Dylan, we will keep the Nuggetz NA to start with as Fred Junior is still learning to drive!
@Dylmark3 жыл бұрын
@@ClunieGarage ohhh alright thats a fair call, I couldn’t imagine myself driving a ‘high powered’ car on my learners
@brockcr8553 жыл бұрын
Great video and what size is your workshop it’s huge
@ClunieGarage3 жыл бұрын
Thanks Brock, the workshop is actually our shed! It is 10m x 20m.
@CrowStudios20242 жыл бұрын
Sweet thats cool nice man i just bought myself a little 2 door black hyundai getz 2006 model 1.6 tempted to get my exhaust fitted soon
@racingmotorsport6803 жыл бұрын
Did u lose any low end torque with the bullet resonator? Exhaust tone has a lot of bass frequencies, did u have any cabin drone? Also the rear muffler will look much better if u cut the bumper a bit and install it a bit higher. Other than that great stuff, can't get enough about getz tuning!
@ClunieGarage3 жыл бұрын
Thanks mate. No noticeable loss of power or torque and if anything it has gained power. It is a bit droney on highway after an hour but at least you can hear it now. We decided not to cut bumper and the angle is actually quite tight as it has to clear rear sub frame-components.
@trentrofl3 жыл бұрын
I've inherited a getz from my mrs as a daily while I'm on R&R and I've been looking at some options regarding power, do you have any idea where to start looking regarding engines that'll fit/upgrade paths, etc? Very little seems to be out there (probably for good reason) but I really want to make a fast getz if for nothing else but a massive laugh.
@ClunieGarage3 жыл бұрын
Gday, getting extra power out of the Getz seems to be the holy grail! Some recommend turbo charging but I am respecting the poor little na engine for what it is - cheap fun. We have done a full service (new plugs, oil and filters) and that made a big difference. Free flowing exhaust seems to be a good mod but ecu mapping, heads, cams etc are probably not worth it for minimal gains. Other route for acceleration gains is weight reduction and we have pulled out close to 50kgs with rear seats removed, spare wheel, replaced front seat.
@trentrofl3 жыл бұрын
@@ClunieGarage yeah I'm much in the same boat, cost of turbocharging it for minimal gains seems pretty pointless, especially in a 1.4. Great little car to learn in though, look forward to seeing the progress!
@danielzechariah72633 жыл бұрын
@@trentrofl mate has 150kw@w out of the stock engine 1.4 with a CT26 turbo from a sourer. Bog stock motor with nothing more than a tiny cooler, 2.5” exhaust and unichip piggy back. For a 1.4 they go alright.
@Gerald50002 жыл бұрын
There are a couple of guys who've put the 2L Hyundai engine in them but does require a little notching of the frame, I believe, for better clearance so probably wouldn't be engineer certified for the street, but they do fit, and on the sly, nobody would know because it looks stock as a rock. Hyundai does sell a turbo crate engine now with 274HP, which would be right on the money I reckon, especially for a track day car. Similarly, guys put the bigger FWD engines in Echos and Yaris.
@lauriedooker10312 жыл бұрын
I doubled talked looking under ‘The Getz’. I thought ‘ what model IRS Donor model did that come off ‘ ? Yeh good one .
@ClunieGarage2 жыл бұрын
Haha, yes no IRS in the Getz. Just a big bar!
@MazeedAkanni Жыл бұрын
Hi woukd you be able to link me and tell me about the exhaust setup ? Im trying to do this with my car
@ClunieGarage Жыл бұрын
G'day, it is a custom made 2 inch exhaust. Most exhaust shops will be able to make it for you.
@kasperfagard5803 Жыл бұрын
I have a lovely getz my self, where did you get that exhaust?
@ClunieGarage Жыл бұрын
G'day, it is a custom made 2 inch exhaust with a stainless steel cannon muffler.
@devlinlynden2 жыл бұрын
im looking to do something like this, I can do any of the fabrication I might need as that's what I do for a living but I really know nothing about exhaust systems and am having a hard time finding parts like the ones you have in New Zealand. any pointers for a canon and hot dog? cheers I did find the same muffler you are using on the Aussie sca website but they don't ship to nz
@lickmycrackandsack3 жыл бұрын
Should get the headers off the guy on getz Australia page on fb
@ClunieGarage3 жыл бұрын
G'day Brad, yes I am going to reach out to him. I think his name is Kurt and a lot of people have recommended his hand made headers. Will look into now.
@jimmyjackson10863 жыл бұрын
When are the next updates coming? Want to see this blue box on the straight at Wakefield!
@ClunieGarage3 жыл бұрын
G'day Jimmy, more updates coming in next week. We will have down time over xmas as well so we will be doing a lot more to all our track cars. Yes, Getz will be hitting Wakefield in new year!
@Donny434442 жыл бұрын
Hi I have a 2004 getz gl and wanted to get a custom exhaust could you send me link for the exhaust
@ClunieGarage2 жыл бұрын
G'day, this is a custom exhaust fitted with a aftermarket cannon muffler.
@sherabgyeltshen62183 жыл бұрын
Hi how much for that same exhaust I got 2005 getz 1.5L
@ClunieGarage3 жыл бұрын
G'day Sherab, we built this exhaust for less than $300. $100 for the muffler and $200 on custom fab work for the 2 inch pipe.
@DuvanFelipeBarretoMolano15 күн бұрын
@@ClunieGarage Hello, where is your workshop located?
@kyte52333 жыл бұрын
Where would i be able to get a full exhaust pipe from for my Getz? I can buy the cannon from supercheap.
@ClunieGarage3 жыл бұрын
G'day, we just went to our local exhaust shop and they fabbed up the 2 inch pipe with a hotdog resonator and welded on a flange to fit the same supercheap auto cannon that you are most likely looking at. All up shouldn't cost more than $250 of pipe work not including the cannon.
@kyte52333 жыл бұрын
@@ClunieGarage Wow thanks for the fast reply! I’ll look around to see if any shops will do it for me. Thanks a lot!
@ClunieGarage3 жыл бұрын
@@kyte5233 No worries and best of luck. Check out our latest videos on the Getz and we are about to do a new custom exhaust on our Mitsubishi Mirage rally car in the coming week or so.
@kyte52333 жыл бұрын
@@ClunieGarage Absolutely!
@Jackyboyz-vc6hf3 жыл бұрын
Ewwww yuck sounds like shit
@ClunieGarage3 жыл бұрын
That's a real shame you think this way Jack, to help correct our 'shitty' sound, please subscribe