Hyundai i10 Radio fascia removal

[@Chundiii]

lol I was getting really frustrated trying to fit a new system and found this video - great commentary made the whole job a little more entertaining 😂

[@churchhouseclassics]

Glad you enjoyed! Modern cars can be a pain but when you can see how they fit together the job because easy

[@paulsayers4887]

Thanks for this guide. It helped me out a lot today as I changed a radio for my wife's friend in her i10. Much appriciated!

[@churchhouseclassics]

Glad it helped

[@AlanAdair-b9i]

Very useful video, its good that you had time to video it. I am in the process of removing the whole dashboard to get access behind the steering wheel / speedo area where my son witnessed some smoke before losing all electrical power! Nightmare, but a compilation of all these little individual video's is priceless, thanks.

[@daniellaw2348]

Thank you mate you've saved another soul from scratching his dash up too much.

[@magnetcarscommercials]

Thanks for a great viedo but I found a lot quicker and safer way to remove fascia put a thin blade screwdriver between cd player and trim so you have no risk of damaging dash, I was shocked 15 radio changed and no damage to either old radio or fascia panel, worth a go, Again thank you for a great video Jon

[@brianclark1352]

Brilliant. Thanks for the heads up. Managed to get the old "Log" radio out and fit a flat screen android based radio. Much better!

[@churchhouseclassics]

thank you and well done

[@LeoStarrenburg]

¡ Thank You ! I hate these 'snap in and bugger the next one' assemblies. This video saved me a lot of aggro, you don't do motorcycles (?) but the Honda Deauville is totally made up from 'click and slide this way and that' panels, grrrrrrrrrrrrrrrrrr.

[@dao6435]

Thank you :D I'll go through this hell today, and I'm sure this video will save me a lot of time and frustration.

[@peterlaing4734]

Excellent video very entertaining but in the end I found that I had to go in between the radio and the surround with a dinner knife and the bugger came out without too much fuss. Kind regards

[@markslade9722]

Yeah, I did the same yesterday, I found the gap trying to go between the fascia panel and dash far too tight, so did as you did and went in with just a food knife between the radio and fascia panel, which was a lot bigger, and it came out pretty easily, this video is very helpful though in showing the position where the clips are located, just have to source a new radio and fascia now to replace the totally dead original unit from new, 09 plate car, so I suppose 12 yrs is not bad.

[@sloughman2180]

Most helpful video I have ever seen youtube! Aint got the balls to do it now!!!

[@churchhouseclassics]

You can do it now! get some plastic levers, they are usually softer than the fascia

[@ashuroking007]

Such an informative video, looking for this as my AUX is malfunctioning.

[@Mrar01]

What u did to ur aux

[@IkkeKendt]

I'm a complete newbie to cars and just bought an old i10 with the same radio is in your video. What should I look for when buying a replacement? DIN 1, 2 or something else? Great video. Will definitely refer to this when I have a replacement.

[@churchhouseclassics]

your choices as it is your car. search for the aftermarket cage first. whether you want double or single DIN will depend on that. Not really my speciality really

[@IkkeKendt]

@@churchhouseclassics so both din types fit in this chassis?

[@sie4431]

Both require a new fascia so it's a case of buying the one that matches the stereo you want

[@BillyF2LJeffs]

Exactly what I needed to see. Thanks mate!

[@sloughman2180]

One of the most useful videos on youtube!

[@churchhouseclassics]

Glad it was helpful!

[@Thanos.K]

Thank you very much for those instructions there! I've installed a new android media. However i think i miss something because when i turn off the engine (no key removal) the whole thing shuts off. Moreover if i don't start the engine for few hours all radio stations are lost and it boots as if it was the first time. Any help on wiring?

[@churchhouseclassics]

Sorry I do not know. There is usually one 12v feed which is constant and live regardless of ignition key and a second 12v feed which is ignition controlled. The first feed is to retain the memory function of the radio

[@CCxx1011]

Super useful thank you. How would you go about installation of a reseview camera? I was looking to fit a screen in place of the radio and it comes with a reverse camera to connect to it but I've heard its a bit complexed to do, but saw a review where someone inexperienced had done it themselves

[@churchhouseclassics]

I have no idea, sorry but there must be a way

[@johankappert3605]

Moest weten waar de clipjes zaten thnx voor dit filmpje

[@mossga]

Best commentary I've ever heard on a KZbin video. Fucking brilliant 😂

[@churchhouseclassics]

Just me, I try to restrain it but fail every time

[@sanjaymohunta]

Is there away to separate the screen of the audio display ?

[@Ztrawbz]

Great video, but now, how do you get behind the small section that holds the aux and USB input. My aux input has come loose inside and I'm having a right old time trying to get in there!

[@churchhouseclassics]

Sorry, I don't know the answer to this question.

[@shone8866]

Excellent video, I was wondering... have you done a video about how to change illumination bulbs for ventilation switches. Best regards from Serbia 🇷🇸

[@churchhouseclassics]

Sorry I have not

[@shone8866]

@@churchhouseclassics Thanks for reply, Happy Holidays 🙂

[@itzthm7930]

how would you wire in an after market radio into an i10. would I just cut the two 8 pin iso connectors off and wire from there? or is there more to it. This would really help me out if u know because there are 0 videos on wiring the i10 radio for the old model radios. Thanks

[@churchhouseclassics]

In the UK we have adapter looms for most common cars and also most radio setups. I guess they are available online too. I would avoid chopping a factory loom unless there was no alternative. The biggest issue with the I10 is finding a cradle that doesn't look horrendous to mount the new stereo into

[@itzthm7930]

Thankyou. Ye I’ve looked and they all look worse than the original radio and don’t match my interior trim colour.

[@LilcoIa]

Do you know what adapter is needed? I want to replace my radio

[@churchhouseclassics]

Google "hyundai i10 radio fascia" and you should see a few options and suppliers

[@stephenward5410]

Good video mate, thank you

[@seekerout]

Thank you. That was very entertaining.

[@churchhouseclassics]

As ever, I am delighted to have helped in any way 👍

[@pauljeffrey3306]

Got my radio out does knot work is it the fuse can you tell me what fuse it is

[@churchhouseclassics]

Sorry but I don't know which fuse it is

[@kdog3980]

Hey mate, this video has been super informative. Do you know if the air vents can be removed and put into a replacement fascia suitable for a double din unit? Can't seem to find replacement ones with the vents built in.

[@churchhouseclassics]

glad it was useful, I have seen a couple of different double din cages for these cars, google "hyundai i10 double din" some seem to replace just the head unit section and others replace the whole shebang.

[@jepthefish2108]

where can u buy that kit?

[@churchhouseclassics]

I think it might be amazon or a quick google will find the source. I cannot remember sorry

[@Poetry4Peace]

Xtrons toolkit installation

[@dupreefrancis3575]

What's the name of the face that u removed

[@churchhouseclassics]

it is the radio fascia or radio mount

[@pradeepb1277]

Nice video... I have the same car and stereo, but it turns on once in a bluemoon. Service guys are saying the OEM is no longer supporting older players so asking me to change the player. If i vhange the player were do my Hazardous Indicator Go????

[@churchhouseclassics]

there is a kit on amazon and ebay that has a new hazard switch and also a double din hole for the stereo.

[@jordz121]

@@churchhouseclassics could you post the link to that product so that I could get that. Thanks

[@churchhouseclassics]

@@jordz121 try www.amazon.co.uk/CARAV-11-143-14-1-Double-Surround-Installation/dp/B07DNG691Z/ref=pd_sbs_107_1/257-6950239-4484412?_encoding=UTF8&pd_rd_i=B07DNG691Z&pd_rd_r=c812713f-66c3-443e-953d-18c393db463b&pd_rd_w=QZnQ1&pd_rd_wg=VeXtS&pf_rd_p=f4a31d1d-8f61-48f5-b6f4-a22ba06df575&pf_rd_r=XHF3RW1HAJJJR2Y193YH&psc=1&refRID=XHF3RW1HAJJJR2Y193YH there are other places, this is not a recommendation just one I found after 1 min of searching. good luck

[@metsubojinrainet-bu6rm]

If you are upgrading to android player for example, you need to buy another frame for it..and the slot for hazard switch is included along with the frame..

[@honorplay4631]

so much detailed video, nice video

[@irshadsayyad7270]

sir i10 sportz model maie jab bhi car start karte waqt f.m. chalu horaha hai lakin usb nahi ha options maie jake usb on horahi hai car start kare ke baad Direct usb on hone ke liye kya kare

[@churchhouseclassics]

sorry but my translation engine on google doesnt work with this. Can you translate to English and I can help?

[@akshaysasane4696]

I have the same car and display is not working..is it repairable?

[@churchhouseclassics]

Sorry I do not know that

[@louisrobinson5952]

amazing vid thanks a lot mate x

[@sonuhaldankar265]

Thank you so much❤

[@aPol.01]

Just got this done, god was it a ball ache

[@churchhouseclassics]

the main reason why I shared the information to try make it slightly easier 👍

[@madhukarpradhan2943]

Nice video

[@muneerchzht]

Thank you 👍

[@jeremyeveringham3223]

I tried to remove the stereo in my wifes 2012 i10, but failed. My local mobile fitter came round, and confirmed this car was one of the most difficult to change the stereo. He dropped the glove box and pushed the fascia out from behind. Also, you will have 2 options of replacement fascias. Get the one that replaces the whole fascia, including the air vent surrounds, not the one that just replaces the space left by the old stereo, because they dont fit very well. I hope this helps someone.