DIY guide on how to replace th fuel filter on a Hyundai Tucson / iX35. Support our channel by hitting the Subscribe button. Thanks!
Пікірлер: 30
@teamsweeney Жыл бұрын
SUGGESTION: Thanks BTD Garage for posting this. I think it's great when people are willing to share stuff with others. I did this and was able to do it by only removing the Battery, disconnecting the two wiring blocks from the ECU, removing the two bolts and nut retaining the ECU allowing the removal of the ECU. After removal of the connectors and nuts on the fuel filter bracket the bracket and fuel filter could be removed without needing to take anything else off.
@kingkenny279710 ай бұрын
Ridiculous amount of items to be removed just to change a filter. Fair play for compiling that video
@mickd802 Жыл бұрын
Wow that’s some work to change a filter, 👏
@alantippett76022 жыл бұрын
Excellent guide to doing this job, I watched today to see how to do the job as it was part of the service I did this morning. 👍👍👍
@btdgarage2 жыл бұрын
Thanks!
@bouzianebenyoussef41552 жыл бұрын
Good job Thank you
@xavierlol94342 ай бұрын
Thanks
@valentin-mirceabala4704 Жыл бұрын
super...
@billycrowfoot96108 күн бұрын
is it necessary to bleed the fuel system to its union by opening and closing during crank and starting upstream line?
@Mohammedkadri198 Жыл бұрын
Merci beaucoup
@btdgarage Жыл бұрын
De rien :)
@hisense2310 Жыл бұрын
Suggestion...remove the air filter element before removing other bits, as you might drop dirt or other things on the element, and unless you are replacing it, or clean it thoroughly, that is the low pressure side direct to the turbo and engine, and you dont want anything ingested.
@dylanscott64852 жыл бұрын
do you loose much fuel? I see a lot of liquid under the vehicle
@royhartle7927 Жыл бұрын
What year is this vehicle?
@fatihksk8508 Жыл бұрын
hello, thank you for the information, I want to ask a question, how many filter removal tools should I buy for filter change?
@btdgarage Жыл бұрын
Hi! A 3-Jaw filter removal tool should be good enough
@fatihksk8508 Жыл бұрын
@@btdgarage thank you
@johnfrancisvillamor98822 жыл бұрын
Does the ECU really need to be disconnected, or can it be moved aside? thanks.
@alantippett76022 жыл бұрын
As there is only the two wiring blocks left to remove and the ECU is out of the way and not going to be damaged, it makes no sense to leave it there. The nut that secures the ECU bracket to the strut turret has to be taken off anyway and the ecu could be left with the the wiring connected though.
@Davazaic4 ай бұрын
Damn it, I think I better take it to the dealer.
@lucaslazuli69812 жыл бұрын
isn't the fuel pump?
@jcmtomal2 жыл бұрын
Would it be nice if the new filter will be filled with pertrol?
@btdgarage2 жыл бұрын
No need for that. Just cycle the key to “On and Off” position for 3-4 times to bleed the air out before starting the vehicle. Read further instructions at the end of the vid. Thanks!
@hisense2310 Жыл бұрын
...petrol ?... Diesel would be better
@hisense2310 Жыл бұрын
@@btdgarage what about a car with push button start ? Hit the button on and off without the foot on the brake ?