I 3D Printed a Dummy 13 at 800% scale, was it worth it?

[@Tortol_VR]

Sooooooo underrated dude, this video is very entertaining. As someone who has printed some bigger (not that big) dummy 13s, I can say that putting that thing together must be a PAIN. +1 subscriber

[@BrandonTucker_1818]

@Tortol_VR thank you so much I really appreciate your comment and sub!! It was definitely a pain I also had to reprint the knee joint because it snapped, the hardest part was definitely the torso

[@TheMightyRuneStone]

How to create human tutorial

[@Foxanoo]

Real

[@williamt6080]

Just add a servo motor system and an advanced cpu and You’ve got yourself an I-Robot r 🤖

[@BrandonTucker_1818]

Yah but that is not a reallity I want to live in 😂😂

[@Ghostly_Eclipse]

I like how this massive dummy 13 have fully articulated fingers

[@BrandonTucker_1818]

Thanks !!

[@PhatBoy-qy1pl]

Great video! I like the pov and shots of you assembling all the pieces and showing the struggles. Im sorry but i laughed terribly hard when you walked away and he just fell. I felt that.

[@BrandonTucker_1818]

@@PhatBoy-qy1pl I am glad you laughed it brings a smile to my face😁. I thaught the shot was funny and I’m glad it was !!! Thank you for your comment and compliment

[@Josppajamas]

I’ve wanted one of these for a LONG time and never looked them up because I figured they were expensive until my parents ordered us a 3d printer and I realized they were 3d printed so once it comes and I learn how to use u bet ur barnacles I’m making one Also this is the only non boring 3-D printing videos that I’ve seen since they ordered that 3-D printer

[@BrandonTucker_1818]

I’m so glad you liked the video, and I bet my barnacles you will like making it !

[@AlexandruColt-j7f]

You should do more long form videos.

[@charlesrusso463]

yo if your putting parts together and they don't really want to fit get a heat gun it also helps to take em apart

[@BrandonTucker_1818]

Thanks for the advice I will definitely use it !!!

[@JBcom07]

It’s so amazing to see you grow and improve your content, and you should look into Licked it well let you use popular music in your videos without getting copyright strike can’t wait to see more of your videos 🎉🎉🎉

[@BrandonTucker_1818]

Thank you so much I really appreciate it, I love when I get heart ❤️ felt comments like this . It makes my day and I will look into Licked , thanks for the tip !!

[@JBcom07]

No problem

[@williamt6080]

The 62 seconds of stop motion at the end is Epic !!! 😎

[@MotionCreatess]

I thought titan 13 was the original

[@L1AMGT]

No the titan 13 stole the file from dummy 13 but they are becoming a trusted seller by the original creator

[@BrandonTucker_1818]

To be honest I’m not sure

[@seanmaravilla]

​@@L1AMGT thats true

[@MosesTucker-q4v]

thats awsome

[@BrandonTucker_1818]

@@MosesTucker-q4v I’m glad you like it bro !!

[@JAMMD17]

Mighty impressive but you assembled the elbow joints backwards lol

[@BrandonTucker_1818]

I would not be surprised 😂😂

[@JAMMD17]

I’ve made the same mistake 😂

[@DanilSay]

You need to cover joints with vanish, it will make it stiffer. Or even with resin

[@BrandonTucker_1818]

Thanks that’s a great idea

[@DerKebab-u1y]

Hey every one seeing this comment please support this guy he. Puts so much effort into his videos ❤

[@BrandonTucker_1818]

❤️❤️❤️❤️❤️❤️❤️🔥🔥🔥 thanks so much for the comment I really appreciate it

[@DerKebab-u1y]

@ no problem

[@BrandonTucker_1818]

@ ❤️

[@danielbarrera9389]

"This is a microbot" GOT MY DIEING

[@BrandonTucker_1818]

😂🤣🤣🤣🤣🤣 I’m so glad you liked it , i can now confirm I have a sense of humor 😂😂🤣

[@AngleAnimations]

How many rolls of filament did you use for the red and blue parts and how much was it, am just Curious to see if I should make one.

[@BrandonTucker_1818]

@@AngleAnimations it was about four rolls of PETG and PLA , my guess is around 80$ in total and a couple days of printing nonstop

[@BeanieMan_1]

nice dude i wish i could buy it off of you

[@BrandonTucker_1818]

Maybe send me a gmail

[@laurenshaw7365]

There are these clippers that you can use to take supports off easier I forget what they're called though.

[@BrandonTucker_1818]

I should get them, I have an idea of what you are talking about!

[@Rollyboyyk]

Hey how do you get shots of you taking supports and stuff off

[@BrandonTucker_1818]

@@Rollyboyyk I have a camera stand that holds my phone look for selfie stick on Amazon

[@Rollyboyyk]

@ thank you

[@Rollyboyyk]

Nice

[@BrandonTucker_1818]

Thanks! I appreciate it!

[@NotRealHamilton]

SICK!

[@BrandonTucker_1818]

Thanks!!

[@EarlTheRed]

Pretty cool bro I love making these I’ve made more than ten now. Instead of going big ( because of filament) I’ve been going small the smallest I’ve made is 75%

[@BrandonTucker_1818]

I’ve thaught of going small that’s sick

[@margaretlebaron1235]

Awesome!

[@BrandonTucker_1818]

I’m glad you like it!

[@mayena5735]

First thing I shouted at the screen when starting this video: You can't just scale up like this, without adjusting the tolerances!

[@Tonymakesvids-q6c]

Dude I want one of these now

[@BrandonTucker_1818]

They are definitely cool !!

[@That_Dude1511]

Hey Brandon, I was just wondering when black suit spidey vid is coming out

[@BrandonTucker_1818]

Ohh sorry about that I totally forgot, I will definitely make it , I just needed the reminder

[@Spaceboys-RX5]

Yes it is

[@BrandonTucker_1818]

I agree !! 🫡🔥🔥👍

[@ray.deathray]

dummy big dummy tall dummy thicc

[@BrandonTucker_1818]

Dummy thic😂

[@pumpkB]

are dummy 13's able to be printed with only pla

[@BrandonTucker_1818]

@pumpkB yes but I needed PETG for the frame on this one , but the small one is 100% PLA

[@Josppajamas]

This was worth a sub Just realized I Alr commented

[@BrandonTucker_1818]

Thank you so much !!

[@croconilly]

How heavy and tall is it?

[@BrandonTucker_1818]

It is about 4 ft tall , let me check the weight

[@Diypeka]

huge!

[@COLD-KIT]

How small can you make it

[@MannyWalker-c5g]

bruh that what she said

[@Tatortotvrlive]

It's a chiropractor tutorial lol😂

[@BrandonTucker_1818]

😂😂😂

[@Tatortotvrlive]

@@BrandonTucker_1818 I'm getting a p1s combo soon it will be my first one how did you get all of the separate pit

[@sethicusiii7878]

Ai generated frames don't work at low frame rates, it just looks bad. Low fps can look good in stop motion, you're just mucking it up. Still though, nice work.

[@BrandonTucker_1818]

I did use stop motion but when I exported the video it messed it up sadly

[@sethicusiii7878]

@BrandonTucker_1818 ohhh. That is unfortunate. I do apologize for accusing you of using ai generated frames.

[@rizaldehome9312]

can you make or print me one i live in the pilipins

[@Silly_Mr.NIGHTMARE]

My my~ someone made a life-size version of the figure! Well I guess I have to- (CLAP CLAP CLA-) that figure IM JOKING

[@BrandonTucker_1818]

That got dark fast

[@LastLargeGiraffe15]

Octopus ???🐙

[@LastLargeGiraffe15]

By the way cool stop motion at the end❤

[@BrandonTucker_1818]

Thanks !! I’m glad you watched the full thing

[@suzlinsalleh7436]

you got sub

[@BrandonTucker_1818]

Thanks so much

[@foxdude313]

seemed to be a pain in the ass.😅cool tho😁

[@BrandonTucker_1818]

Thanks !!

[@candicenorvell4708]

I want itttttttttt 😩😩😩😩😩😩😩

[@MannyWalker-c5g]

not one ALL!

[@Raykay1294]

The maker is called Soozafone

[@BrandonTucker_1818]

Ohhh thanks !!🙏

[@MannyWalker-c5g]

sell then I WANT SOME!

[@TharonBounds]

you bilt the arms whrone

[@BrandonTucker_1818]

Sorry about that !!

[@_MECHA_]

W

[@khuerbsch]

He did the steps not in order

[@Mrbananavr87]

Ok

[@MannyWalker-c5g]

mot one ALL