I 3D PRINTED A LIFT KIT For My XC70 for $30

I 3D PRINTED A LIFT KIT For My XC70 for $30 | Weekly 28

Рет қаралды 449

Joel Kalich

Күн бұрын

Пікірлер: 14

@heiszerton Ай бұрын

What size tires are you running?

@JoelKalich Ай бұрын

Great question! In this video, just the stock size. In the future I got some 225/70R16 KO2s. They're definitely as big as I'd go, under suspension extension they rub a little bit in the rear, just on plastics though.

@heiszerton Ай бұрын

@@JoelKalich Sweet, those probably look great. Where in the wheel well are u seeing rubbing, forward, top or back?

@JoelKalich Ай бұрын

@@heiszerton No probably about it haha, they look and work great. In this video I put them and the lift to the test! kzbin.info/www/bejne/n2S2aI2LqZaUf5o They're rubbing on the front, for some reason the wheels aren't centered in the wheel well of these cars.

@heiszerton Ай бұрын

@@JoelKalich That is what I figured, I noticed that in ur video. Thanks for posting this video was super cool and helpful. How has the material held up?

@JoelKalich Ай бұрын

@@heiszerton Yeah, for sure! I haven't checked how they held up, but they haven't un-installed themselves yet, and I've beaten the heck outta it.

@Reyalsnogard42 4 ай бұрын

Unexpected ASMR always appreciated, thanks nature

@JoelKalich 4 ай бұрын

Immediately followed by loud hammering. The perfect ASMR!

@Reyalsnogard42 4 ай бұрын

I was wondering why it took you so long to get home after the welding adventure 😂

@SilentDecode 3 ай бұрын

I assume you printed it with 100% infill? Might actually want to do this too, if I ever get a XC70. And for longevety reasons, you might want to print that in Nylon. Because PETG isn't really strong enough in the long term.

@JoelKalich 3 ай бұрын

Yeah, I probably should have looked into nylon, I know others have printed them in that. I used 90% infill, 15 walls, 20 top/bottom layers, and 0.65mm extrusion width. The amount of walls/top/bottom layers meant the tophat spacer was nearly solid and the coil spacer was solid. The designer of the parts has suggested minimums.

@SilentDecode 2 ай бұрын

@@JoelKalich Still, Nylon is a lot stronger for such forces. If you ever have issues, see if you can print them in nylon. This way it's much stronger and probably will last a bit longer.