Thanks for watching, friend! I'd love to hear what you thought of this video?
@TA-87876 ай бұрын
Please less innuendo, otherwise great!
@riba22336 ай бұрын
Your impact started smoking because it is a brushed tool, you should always add a bit more and go for the brushless version
@BenWolkWeiss6 ай бұрын
Agreed with the less innuendos. I'm not offended by them but I think they distract from the video with the quantity that were included and the asides that pointed them out. If you are going to make an innuendo, it should just be left to stand on its own otherwise it feels very forced and unnatural. Also, not digging the haircut. I think you need to go shorter on the top as you have a taller ratio face and the taller hair doesn't balance it out.
@ragingroosevelt6 ай бұрын
I'm curious what issues you ran into with the pastamatic. I've used it before and it has seemed to be flawless.
@kevd72126 ай бұрын
I enjoyed the video, I always find myself remixing printable vices so I can use steel threaded rod in place of printable threads.
@Youpuber6 ай бұрын
Hi! I am the designer of the Solder Scroll. Thanks for featuring my design! The tolerances should work with most well-tuned printers. Removing the seam with a small file on the inside of the gears should help as well. Otherwise increase the gear size with a few percent. Hope that helps!
@thenextlayer6 ай бұрын
Thanks for the info. After some harsh rubbing (giggity), I got it working much better :)
@hellterminator6 ай бұрын
I don't want to come off negatively, but what is the purpose of the Solder Scroll? From the introduction in the video, it first sounded like it was supposed to free up a hand, but upon closer inspection, that doesn't seem to be the case, so what's the advantage over just holding the solder between your fingers? If anything, holding the solder directly only requires two fingers, leaving three for holding wires/components/board in place.
@maticz39236 ай бұрын
Printed your model in PLA on bambulabs P1S Works great!
@Blechdoese5 ай бұрын
I printed your design 3 times in PLA and PETG. I had to use a drill to get the hole size correct for the gears. But after that it works great.
@qh_55 ай бұрын
I don't usually comment on KZbin or give reviews, but I have to say that I printed your model today on my P1S, and it worked perfectly on the first try! (No lubricant applied) I actually told myself this is one of the most useful things I've 3D printed. It's unfortunate that it didn't work in your video, but I guess you can't win them all.😂
@rodrigob6 ай бұрын
Understanding which popular prints are worth our time or not is, in my view, a high value video proposition. (One hour of Next Layer testing something bad is thousands of hours of pain saved across the viewers, one hour of Next Layer having fun is opening the door for thousand of hours of viewers sharing the fun). Looking forward for the follow-up.
@thenextlayer6 ай бұрын
Yep, I like this video format, for sure. I get a lot of free filament, and I'm working on a recycler... so I'm happy to be the guinea pig for you guys :)
@chuckm35206 ай бұрын
I agree. Reviews on what is / is not ready for prime time saves your audience lots of wasted time and filament.
@redskyreconn7446 ай бұрын
Totally agree, and the eloquent setup at the start clarifying that its not a slam but a true user experience critique
@twithheldmwithheld89386 ай бұрын
Couldn't agree more. I love this format and topic.
@melindarm19756 ай бұрын
Agree. I love this format
@rickmontzka75066 ай бұрын
I'd watch another video on 3D printed tools. One trick I use with threads (or similar) is baking soda and water. Get the thread wet. Sprinkle a little baking soda on the wetness to form a paste. Try threading it together like cutting threads - forward a little then back it off and try again. The baking soda acts like a polishing grit and it seems to leave a film that is a little slippery. Rinse the parts clean when the threads are working better. There's my 2 cents worth of advice related to 3D printed threads.
@br3nz3l5 ай бұрын
Good one. Will try this.
@ashlandwest16475 ай бұрын
@@rickmontzka7506 this is brilliant. Thanks for the tip!
@DrDoohickie6 ай бұрын
I want to expound what @rodrigob said. Printer reviews are great but I'm pretty much set on which brand I trust. Reviewing print designs, however, is really informative and interesting. Reviewing tools also gives a great justification for 3D printing in general. Explaining how you adjusted some designs to make them work is also useful for viewers. I think this would be a great niche for you and great content for viewers/followers.
@thenextlayer6 ай бұрын
Hey, thanks for the awesome comment! I'm thrilled you enjoyed my content. I'll definitely look into exploring print designs and tools more. Cheers!
@justamember246 ай бұрын
Yes! I have several prints I’ve held off on because we don’t know how to “remix” them yet. Just last night I was looking at soda can dispensers, but none would fit my mini fridge AND American sized cans.
@schmiddy84336 ай бұрын
I noticed in a bunch of your bambu lab timelapses you have parts fail from random threads flying off of it from the infill. I have found that this is from having my max flowrate set too high. At high speeds the plastic rather than flowing out to the sides seems to expand and bunch up behind the toolpath of the nozzle meaning when the nozzle comes back it smacks them out of place, so this could also just be infill print speed too high. I'm guessing that the nozzle tip is just too narrow on BL printers to really properly spread the plastic out. This drove me nuts because I get insane results on most flowrate test prints, up to 20mm3/s with PETG, but in reality i find that real prints fail often at this speed. As soon as i set my flowrate down to 15mm3/s everything prints perfectly i haven't had a problem since for the past 200 print hours. For dimensional accuracy I found that inner/outer/inner works best. This means the inner-most wall prints first, then the outer wall, then the 'infill' walls get printed. This has been super accurate for me. I also generally recommend when printing long tall objects to just split it up into multiple prints. It's just too risky to print them at the same time. Don't bother respooling cardboard spools. Just put electrical tape on the edges. I've had zero failures in my AMS with that hack.
@chriswisneski60716 ай бұрын
Some cardboard spools come with burnished edges to address this problem. Some brands that do this actually work reliably out of the box in the AMS, aside from occasional issues with having to add weight when the spool is low on filament.
@FirechickenExpress6 ай бұрын
Yea, all my elegoo rapid petg is coming with sealed cardboard edges. Works great til it's too light. Just be sure the spool is round if amazon sent it. I had 1 completely birdsnest itself cause the spool was squished and jumping in the ams.
@anthonylong58706 ай бұрын
Bambu printers are VERY widely known to have issues with tall prints, especially thin ones....I never trust my Bambu on any kind of tall print. Its why i bought a Flashforge 5M
@jamesperreault68006 ай бұрын
Hey, awesome tip. I have to try that. I'm new to 3d Printing. I was getting okay print results with "normal" rate print speed, but I would often have issues with buildup on the print nozzle. Silent mode worked almost flawlessly. Sport and Insane modes .... always resulted in spaghetti. I've probably gone through 20 KG of PETG filament, so I'm still learning. But I do appreciate the knowledge. Again Thank you.
@schmiddy84336 ай бұрын
@@jamesperreault6800 if you have nozzle build up lower your flow rate/extrusion multiplier by 0.01 each print until it doesn't happen anymore. I have mine set to about 0.94 and I get zero buildup and isn't under extruded at all.
@kalenpatterson68546 ай бұрын
I'm always most excited to see your new videos come out because they're actually useful! Not just another sponsored review video. Testing things like tools, filaments, print settings, and other things that we makers use every day and wonder if there's something better we could be using, or want to know if something is actually worth getting without having to waste the money buying a bad product. Keep doing what you're doing!
@TheOfficialOriginalChad6 ай бұрын
Anything with threads should be printed horizontally. If you don’t like supports, then just drop a few mm of the threads under the build plate and it will work just fine. Think about it: tightening a bolt stretches it. If you print vertically, that means the force is pulling the layers apart.
@the_void8565 ай бұрын
@@TheOfficialOriginalChad The other idea is to actually make not a few mm below the bed but fully design the bolts to be flat for around 1/3 of their diameter. They work really well at least for me, being using them for a while now and none of them broke, though I'm also using a pretty deeply cut threads.
@TheOfficialOriginalChad5 ай бұрын
@@the_void856 agreed, but I’m talking about printing, not designing.
@RobertONeillPhotos4 ай бұрын
another idea for reenforcing is 3d printing threads is using threaded rod. the threaded rod is just screwed into the center. it acts like to metal center of the plastic. for something like the vice it would be better to mount a nut and use larger threaded rod. it can be useful to 3d print 10mm custom pitch threads. the screw a M4 shaft to hold it together.
@voltdriverАй бұрын
I'm not sure I understand the "drop a few mm of the threads under the build plate". Do you mean taking a horizontal bolt, printing so the threads (inserting an object in it) would be parralel to the build plate, and printing 2 halves, each of which sit flat on the build plate? Then glueing them together?
@TheOfficialOriginalChadАй бұрын
@@voltdriver no, the threads should be perpendicular(ish) to the build plate, so the bolt is laying down. Then cut the bottom few millimeters off of the bolt so there’s more contact area on the first layer. Bolt before: O Bolt after: Ω
@themacbookgamer6 ай бұрын
5:05 I've given up on printing PETG until I can get a filament dryer because printing in 50%+ humidity is just not working
@TheRogueBro6 ай бұрын
Have you looked into making a filament dry box? I store all my filament in a sealed container with desiccant. Tons of really good ones out there using cereal containers and running a PTFE tube right out of them so the filament never leaves the "dry" space.
@thenextlayer6 ай бұрын
Pfff imagine how I feel at 75%. GOD HATES PETG.
@AmixLiark6 ай бұрын
What type of nozzle do you use?
@AmixLiark6 ай бұрын
I use a diamond back nozzle and i realized thats a really bad nozzle to use for PETG because it has so much surface area to contact the PETG while it's being extruded onto the print. It causes the petg to grip the nozzle, drag along the print and curl up the back side of the nozzle. A nozzle with a very thin tip like a standard V6 brass nozzle would be more ideal. PETG doesn't like to stick to itself when there is a source of heat so it is best not to give it an easy heat source to collect on. It's also really bad at bed adhesion on corners which can come off the bed and snag your extruder causing layer shifts. It's best to combat this by using the "do not cross perimeters" option so you nozzle can't snag the edge of the print amd use large brims on the corners.
@ethancohen60056 ай бұрын
Sunlu s4. It is wonderful and there is a deal with a free spool of pla going on right now
@Mildly_Amused6 ай бұрын
I saw the parts of the pastamatic spooler in your filament recycle bin. Mine has worked flawlessly since I printed and assembled it last year. I eventually added the 3kg spool optional remix and mounted it to a piece of scrap wood. The only addition I'm going to add is a TPU brake with adjustable tension for the source spool. I wonder what made you toss yours out?
@thenextlayer6 ай бұрын
You nailed it - the lack of a brake... spools spun out of control. Also, it was a hassle to move around without dis-assembling.
@meanman69926 ай бұрын
A lot of you guys need to learn the techniques the 3D printed firearms makers use and apply them to your mechanical projects for strength and durability regardless of your opinions on home made firearms. Also cardboard spools for high heat filaments are a GOOD thing as it means you can dry them at higher temps that most of the polymer spools can’t withstand.
@thenextlayer6 ай бұрын
Good points.
@gloriousapplebees6 ай бұрын
Do you have any insight into what techniques they use? I've seen quite a bit of content but I only ever see videos on use and durability, not on the fabrication. I haven't done a lot of research though, hoping you can shorten that process lol. Thanks
@yourlocaltoad51026 ай бұрын
I base most of my printing related choices (which printer I got, which filaments and which settings I use) on recommendations from the 3D2A people. If they trust the materials and settings they use to withstand all the stress that a gun has to endure, then those settings will definitely allow me to print a robust little watering can or bird house.
@TheOtherPlayer5 ай бұрын
@@gloriousapplebees being super mindful of printing orientation, annealing, and knowing when to use metal hardware are pretty key for some applications
@DarrenGerbrandt5 ай бұрын
unless the glue holding the cardboard spool together lets go because of the heat in a dehydrator. Not fun I tell you, managed to respool most of it but what a pita, now I put a clamp on my cardboard spools to make sure they stay together in the dehydrator.
@ultramegax6 ай бұрын
Gotta be honest... I question whether some of these print/tool fails are user error. I've used the Pastamatic Filament Spool Winder for months and it still works great. Super clever design and super reliable. And that's with PLA+. If I have to reprint it at some point, I'll do the gears in nylon. But no issues yet. I'm also not sure why you thought an impact driver would be the tool to use for the respooler. But at least you're honest about your mistakes! I really appreciate that!
@ChippWalters6 ай бұрын
Yes, I have to concur. There are several what I consider to be basic mistakes I saw. There's no reason to ever print out a screw vertically as it considerably weakens the strength of the threads. Hacking together parts by drilling them and using soldering irons certainly doesn't seem like the stuff of smart reviews. Why not just reprint it with an adjustment? I also have the pastamatic and have used it dozens of times without issue. It just works. You might try that. I also might mention that when I'm printing out other people's projects that have fine tolerances, I typically try and use Bambu filament as the printer is tuned specifically for the filament. Furthermore, PLA is just fine if you're not going to have it outdoors and you just need a strong rigid tool.
@Izmirization6 ай бұрын
This dude printed a device powered by power tools with some fufu glitter PLA and then blamed it breaking on the engineers. This was a really poor review of a tool I would like to know more about being a pastamatic user myself
@NonJohns5 ай бұрын
it was only there for a frame but in the video he mentions that he got it working i do think ease of access is part of whether or not a print is worth someone's time if you have the know how to trouble shoot a print then you could probably design and fix a lot of these as well
@noanyobiseniss74624 ай бұрын
Yeah, I just added this guy to the block list, immature commentary with fluff vids and lack of any skills and/or intelligence are a losing formula in my opinion.
@morgenkaffe6 ай бұрын
I have printed the V spooler in only ABS+ followed the print instruction, and also follow the instructions of use. It just works GREAT, never had a single problem with the respooler, at any moment, and yes I do use it often. IMO the absolute best respooling system out there so far. It took me more than an hour to collect if fully and was no hazzle, with the great in dept instruction. Use some grease for the gears and you are all good. Just dont run it too fast with the electric screwdriver, when respooling. Have fun with your new V Spooler
@thenextlayer6 ай бұрын
Yep, it's great, but I beat the shit out of mine... need to rebuild and be more gentle.
@Momofatts16 ай бұрын
I agree, it's the best Respooler on the interwebs!!! The electric motor remix is amazing as well
@zionbrock4 ай бұрын
Do you think it would be durable enough in PETG?
@morgenkaffe4 ай бұрын
@@zionbrock Yes absolutely, I just like to use ABS.
@Paradox460_yt6 ай бұрын
I print a lot with PETG, and the stringing is something you get used to. Its easy enough to clean up, however, just run a low temperature lighter, like a bic, over the part quickly. All the strings will either fall off or curl up right next to the part, where a deburring tool can pop em off easily
@digitalsparky5 ай бұрын
Flexible Hose: What about adding 4 magnets into the base, that way you don't have to weigh it down as much, it'll stay stable, and you don't have to clamp it to a table, you can use any magnetic surface.
@MarcoTedaldi5 ай бұрын
@@digitalsparky that's a good idea as long as you're using it on ferromagnetic surfaces. Weighted down it works nicely on aluminium and wood too...
@Jwmbike143 ай бұрын
Havent gotten past the first tool, which was the flexible vacuum hose. However, when I saw your foot mount to flat mount to to table with weight, I immediately noticed you could syphon off of the vacuum line and haf the foot "suck" its self down to a table, so long as its wood, plastic, metal, etc.
@birello366 ай бұрын
Regardless V-Roller, print plastic insert ("Handle-to-Drill Adaptor (Strong)", see files) for your drill. It doesnt strip anything. I also stripped like 5 of drill atachments before realizing metal on plastic doesnt work.. Print "Quiet Roller for V-Spooler" - it's a bottom rollers with TPU rings, so it makes it quiter
@Momofatts16 ай бұрын
The remix that adds the electric motors is amazing. Best Respooler I've printed.
@leonardosestari59514 ай бұрын
I've had more luck printing long objects when i print them one at a time, since the print head doesn't have to jump from one to another. That prevents it from bumping stuff and knocking them over. Maybe that makes some of these prints worth it to try again.
@marcor64036 ай бұрын
This is a great video, thank you! I you want to hear my 2 cents; I have a good experience of soaking petg in car oil over night (after printing of course) when I use it for moving parts. I always try to print load bearing pins horizontally for strength but this can be hard with some models when the pin is attached and/or may require support for the rest of the part.
@vinaymieux2 ай бұрын
Hi at 0:56 what is the glossy built plate on the X1C? Does it need glue? Does it give glass like bottom finish? Thanks.
@thenextlayer2 ай бұрын
Https://jle.vi/whambam PEX
@justamember246 ай бұрын
Please do more of these types of videos!! We are always looking for useful printed items to print for woodworking, farm stuff, sewing, organizing, and various other projects.
@thenextlayer6 ай бұрын
On it!!
@nikkolaus6 ай бұрын
This happened to me yesterday..... took two hours to print a rose shaped ring box with a 3D printed spring in it... you had to pause the print midway thru and install the spring which had already been printed ... the instructions had no indication as to which direction the spring was supposed to go, even though you could clearly see one side had a curve and one side did not... there were no photos of it, and there was nothing in the written description about it other than the need for a Pause. But after printing it, the spring worldnt compress, because the part was backwards. And with the pause midway thru the print, it was sealed in,..... so, I had to spend More filament AND , 2 hours EXTRA to get a working model and had to trash the first one completely
@AndrewAHayes6 ай бұрын
I printed a puller tool from Makerworld but the thread on the main screw did not have a start which made screwing it in to the frame impossible, the designer claimed he had no issues screwing it in, I took a closer look at the design, I was right there is no way this will work. There is no photograph of the printed tool which normally puts me off printing the file, however I could not find a puller tool anywhere else and so I took a chance. I asked the designer to post the photo of his printed puller that he claimed the bolt screwed in, as expected no photo was uploaded!
@JeronimoStilton145 ай бұрын
Just file a chamfer onto it
@RobertONeillPhotos4 ай бұрын
It is a big clue if all they post is screen shots. I accept some screen shots to show details. but real is really better.
@liquidrockaquatics39005 ай бұрын
3:02 you could use that articulating arm for other devices like lights or add clamps like mechanical fingers for soldering, but larger so it isn’t all in the way
@circleofowls6 ай бұрын
"endlessly procrastinating input shaping on my Voron..." damn I feel so called out. Outstanding video series, I'm really looking forward to more!
@elvinhaak5 ай бұрын
For the respooler: well, I just use a battery-drill, a steel rod and a cap that I printed with an M8 bolt inside to turn the 'new' spool with. the old spool over a steel pin or bolt in a vice and just spool. Filament likes to go to the lower part on the spool and thus gets evenly distributed automatically when not turning way too fast. I have used at least 100 spools this way. But mostly, I use refillament directly so I don't need to respool that many spools.
@trotskiftwАй бұрын
The tabletop one - if you add a TPU gasket you could have small holes let out into the base, to steal part of the suction power to suck itself down rather than relying on weight alone.
@andreapalazzi6703 ай бұрын
In my still short experience in 3D printing, and with a background in mechanical engineering, I feel like most of the free designs out there are just like "this is a great idea, let's do it", but then it's never tested or never revised after testing.
@Nutrafin-3D3 ай бұрын
I keep seeing respoolers come up in videos and sites. What is the purpose? Why change spools?
@MichaZajaczkowski6 ай бұрын
About Sovol printer. I bought the SV06 and after a few replaced parts, with heated bed included, warranty has ended just after the main board started "forgetting" firmware. It's good as a base for upgrades, but otherwise expect issues.
@Vash.Baldeus6 ай бұрын
17:45 I wonder if you have tried the scarf seams in Orca Slicer yet, it is quite possible it could fix this issue.
@filipdolnicek17276 ай бұрын
My solder scroll worked flawlessly.It depends on what filament you use, although the wheels should use andifferent type of gear.
@HorizonMakes6 ай бұрын
Have you used the featherboard? Does it do what it says on the tin properly? Does it shatter after one use? You haven't really shown using it while ripping wood
@thenextlayer6 ай бұрын
I need to get nuts that fit properly!
@Dragoninja8336 ай бұрын
Using a drill for the filament re-spooler is NUTS. Yes, that's an option, but I would argue it's a bad one. Drills are powerful and fast. Any friction created by bad tolerances or the layers in the print, rubbing on other layers, is going to create heat. Obviously, heat is the death of plastic. If it doesn't melt it, it will make it brittle. Go nice and slow, you won't tear up your rods or screw up her holes nearly as much. ;) Slow is smooth, and smooth is fast! Also, use plenty of lubrication. ;)))))) Actually, any bit of a 3d print that interacts with another print, should be lubricated. Sanding the mating surface of the print will help to smooth out the first layer, too! It's a lot of post-processing... but like any project, prep work is the key to success!
@DejitaruJin6 ай бұрын
Preemptive warning about the "helping hands" models: The tolerance issue you had with the vacuum tube pieces scales _exponentially_ as those pieces get smaller.
@JasonBlack662 ай бұрын
how do you power your 4500-watt vacuum? I would have thought that is way too much power for a standard power outlet.
@thenextlayer2 ай бұрын
It is. I can’t turn on all 3 motors at once.
@williecat3165 ай бұрын
I printed the Solder Scroll, and it worked flawlessly for me on the first attempt. I'm sorry it didn't work out for you, but it was game changer for this novice solderer.
@thenextlayer5 ай бұрын
Got mine working with some abuse!!
@Emin3X6 ай бұрын
Personally made that solder extruder, and luckly for me it works without any issues after printing everything once. Osed it also only once, but it's soooo much better than handling too close to hot solder with bare hands
@thenextlayer6 ай бұрын
I put a text title showing htat I did get it working after recording the video, and it does work now. Just took some time to break it in. Giggity.
@Emin3X6 ай бұрын
@@thenextlayer oh, didn't see that text for some reason - good it works for you too :)
@calinnilie6 ай бұрын
Would you suggest getting a Creality K2 Plus + CFS, waiting for reviews to come out, or go straight for a Bambu X1C + AMS now while it's on offer?
@thenextlayer6 ай бұрын
Haven't tested the K2 Plus, so I can't say.... Sorry :(
@NiSE_Rafter6 ай бұрын
Do you mind tinkering? Creality K series has potential but requires more from the user, same for most "budget" printers on the market. Bambu is more plug and play if you just want it to work, but you pay a premium for that. It's a decision between if 3d printers are your hobby (Creality) or you are looking to support a hobby with a 3d printer as a tool/appliance (Bambu).
@calinnilie6 ай бұрын
@@NiSE_Rafter I'm willing to put in the hours as I have in building my Voron V0.1 and rebuilding and upgrading my Ender a bunch of times, if it means I can get similar performance out of a printer whose software isn't completely locked down (Bambu even encrypting their log dumps is really weird IMO)
@NiSE_Rafter6 ай бұрын
@@calinnilie Personally I'd get the K2 Plus then (Klipper plays a big factor here), but only after it's been properly released and evaluated by the public. The K1 had some early issues hence the K1c coming so soon after and I wouldn't be surprised if the full K2 setup had a few hiccups at launch too. Edit: ya know what seeing that early bird discount it might be worth it to say fk it and get it on discount lol maybe I'll join you
@TheMNWolf3 ай бұрын
As someone who frequently uses helping hands for soldering, I wouldn't recommend 3D printing one. You're really going to want arms with the strength that a metal core provides.
@drstefankrank6 ай бұрын
I printed the flexi hose in 100mm and PETG and it is too slippery. I reinforced it with printed hose clamps to make it work and adjustable. I recommend printing them with fuzzy skin. This introduces a lot of friction, but with every move, we have a little bit of abrasion and the sides will begin to smooth out.
@SimplestUsername4 ай бұрын
6:51 have you considered making that part with polypropylene? I read somewhere on internet that PP lubercates really well... Or something like that.
@therdgf6 ай бұрын
Loved the video! Congrats! But can you help me? 0:43 what 3d printable chest is this? Can someone tell me? You print the parts and assemble the chest?
@Immolate626 ай бұрын
I printed the respooler in PETG but haven't done much with it. I need to reprint the drive axle.
@wayne63186 ай бұрын
As I am just starting out into this "3D printing" world, I really appreciate the information that you have done. Great work, keep it up.
@kenscoda88305 ай бұрын
I have had one or two prints that turned out hard to turn, so when I have this problem I turn to a lubricant I use to lub printers. I use lithium grease, it seems to do the trick. It never did any damage to the printers I repaired. For plastic tools it seems to work so far
@damagedspline5 ай бұрын
I live at Yokneam, Israel and have 0 issues with PETG. I am using a modified Artillery SW X1. ASA on the other hand. required some additional modifications to my printer.
@EvilSpyBoy5 ай бұрын
I switched to a Pastamatic roller and aside from needing a few extra pieces (clips to hold down, different spool holder bar, some shims) I have run through so many rolls
@scotthull260Ай бұрын
Great vid! I stumbled across your channel and loved how well you explain things so I decided to subscribe. Fairly new to the world of 3d printing and have printed everything so far with PLA. In your videos, you mention using various types (petg, abs, etc). Would it be possible (if you haven't done so already) to do a video on which filament should be used for which application scenarios? Thanks!
@spyrule6 ай бұрын
For the V-spooler, I just finished mine, and I agree about the center bore. It would be better to add a run-away bar on the top spool (when my spools start to get to the end, they tend to want to run off of the spool if it goes too fast). Also, I think a re-design of the screwdriver version, to add a replaceable mount would allow for less re-assembly, and only having to replace the small mount itself. Yes, mine is also noisy as hell...
@krisCrashTV4 ай бұрын
I hear fuzzy skin is good for handle grip, and that would hide some of the model imperfections. But I've brought screwdrivers like that in any old hardware store for cheap so really wouldn't bother printing. Handy expansion parts for it, sure. But I think it's a good thing the main parts are injection cast or metal for strength too. I make my models in blender, and I COULD share the blender files if people want to export them at a higher subdiv level
@josh-3d-wd3ct6 ай бұрын
I enjoy this video. Inspires me to further my own designs and make sure they're easy to print and function smoothly.
@TheMNWolf3 ай бұрын
I've been wondering lately about adding a wipe tower to tall, thin prints, to give the layer time to cool before going over it again. I think it would also help with overextrusion bulges.
@kegandemand87284 ай бұрын
I made the fillament spooler and have been very happy with it, the noise problem i fixed by putting tape around the bottom rollers to "cushion" them. I also printed it in petg so that it holds up better though i only run my drill at about half speed while im transfering fillament, as ive had too many fillamenys snap at full speed on other respoolers and it becomes a nightmare.
@dougcox835Ай бұрын
Slant 3d has an excellent video about printing things like threads vertically like you did with the vice. The weakest part of 3d parts is the layer lines so for strength (like with a vice) you need to print horizontally (or slanted, that's their thing). He came up with a clever trick to print a screw horizontally, slice off the side lengthwise to provide a flat side to lie on the bed. The screw will still do it's thing and be much stronger.
@nightzelmods6 ай бұрын
If you are printing PETG with any bambu printer you need to slow down the print speed. Their default speed is way too high and will cause issues like poor layer adhesion and the stringing you are seeing. 75mm/s is about as fast as you want to go with that material.
@SianaGearz6 ай бұрын
Are Bambu profiles same or similar to Orca ones? The PETG profile in Orca is completely nuts with part cooling fan, not surprising things fall apart. And yes the material is weird and has a limit to how fast it wants to be pushed before it behaves oddly as well.
@owerfieowajlkf6 ай бұрын
Print the silent rollers and tpu feet to make the v-spooler quiet. You can find the download in the print profile section of the v-spooler.
@thenextlayer6 ай бұрын
Ohhhh smart, I'm on it.
@nakansam6 ай бұрын
Great video. Really interested in the filament respooler. Please do more of this type of format.
@thenextlayer6 ай бұрын
Thanks, will do!
@christopherstephens26996 ай бұрын
With the filament spooler if you aren't going to put in some kind of bearing you will inevitably wear through anywhere that's spinning. It's just a question of time. Even bearings will eventually wear out, although it's not likely with non commercial/industrial use and decent bearings. You could try something like making bushings as wear parts to insert too. Ideally out of a slick plastic. Typically those would be made out of uhmw, which you aren't going to get for 3d printing. However, that's just a special formula of PE, so you could try hdpe if you have some unless you have something else you would prefer. Another option is good old fashioned lubrication. A little bit of white lithium grease can go a long ways. Good luck!
@thenextlayer6 ай бұрын
It uses 20 bearings!!
@christopherstephens26996 ай бұрын
@@thenextlayer It had bearings and still broke at a point with the bearings? Did you use printed bearings or bought?
@mikemaloney26226 ай бұрын
Great reviews and format. I too have waisted a lot of time and filament on things that looked like a good idea. One of my friends just waisted a bunch of time and filament on one of the “other” filament spoilers. Thanks.
@viewatyourownrisk6 ай бұрын
Thanks for the video. I've seen a few videos where the filament respooling tools experience failures due to their interface with the drill/driver used to operate them. It seems like a model that has an affixed motor might hold up better, as well as can be operated more slowly. Friction wear and heat seem to be the failing points on the models.
@Jolly_Green236 ай бұрын
The solder scroll was flawless for me, but I did print the left-handed remix.
@thenextlayer6 ай бұрын
After working it a while, it got better :)
@ericolofsson6 ай бұрын
Flawless for me too. Printed the normal one on a shitty v1 ender 3 but its well calibrated.
@EnnesArms6 ай бұрын
I’ve actually printed a dummy version of the LTT screwdriver (I think it was a month before the ratchet version was released) the reason why the model has so many artifacts is because it’s a direct 3d scan of the screwdriver, and it’s _extremely_ tedious to convert scan meshes into step files. As for the fitment and ratcheting, yeah I think that’s on the designer, lol
@thenextlayer6 ай бұрын
Oh that’s kinda shitty that it’s a 3D scan. Didn’t realize that.
@Chrissi330044 ай бұрын
14:03 how does a 3D printing channel with 130k subs not know how to print slightly challanging models?
@AyabaraGamingАй бұрын
the big selling point of the LTT screwdriver is the ratcheting mechanism, a 3d printed variant just wont come close. Theres a reason why development took years lol
@gerardatkinson78186 ай бұрын
Great video, and thanks for testing these so that we don’t have to. One thing that struck me in watching it was that some of the challenges came from having to print tall cylinders such as threaded shafts where the contact area on the build plate is small relative to the volume of the part. When Multiboard came out I realised that so many designs could benefit from the thread design used there which flattens two sides to enable printing the long axis parallel to the build plate. For some of these prints (like the vise) a similar approach would make them easier to print and more durable, and the seam placement can be on a non-contact surface.
@daxtonheath13425 ай бұрын
Isn't there a free version of the v-spooler or was it temporary free when I got it?
@JeronimoStilton145 ай бұрын
It’s fascinating that you actually had a backstory for the Vroller, I thought it was a solution looking for a problem. Kind of wild that you can damage a cardboard spool when I go to recycle them they usually have some resistance turning off the sides
@tonyfwebАй бұрын
I'm trying to download your remix of the flexible hose adapter in order to optimize it but I'm unable to open your step file. Could you please look into it? Also messaging you on printables.
@dronesandgopros32766 ай бұрын
THAT is the video series I was waiting for. I always find myself lost scrolling through printables or thingiverses tool section looking at these models wondering if I have the 2-3 kg of filament to waste if its a pile of. Now I know which is good or which to avoid (or not avoid but print with care). Thank you! I'm looking forward for ep. 2 ;)
@thenextlayer6 ай бұрын
BOOM, I'm happy to have a "series" I can do once a month or once a quarter.
@waldosdroidmail3 ай бұрын
Can anyone please tell me the name & brand of that Bluish color filament on his back grid wall? Driving me crazy trying to find it 😅
@thenextlayer3 ай бұрын
Which one the flag?
@cilismoniker73224 ай бұрын
You might have better luck with using scarfed joints to get rid of seams on screws. Sort of a new feature on Orca/Bambu slicers. You can also make them less likely to bind by printing them sideways. When sideways, slice off the top and bottom face so it's an I shaped screw instead of an O shape. The flats wont hurt the performance much at all but will greatly increase their ease of use and likelihood of not warping.
@petruskruger9281Ай бұрын
Love the badge ratings! It would be great to have a list of these favourite functional prints on your website. Even a simple Notion integration would do the trick. Happy to help with that if you want!
@ricardoumbelino24456 ай бұрын
Loved it. Really good advice. I printed the V-spooler In Petg and PC. So far so good. Any thoughts on the various printable Heat-Insert Press models out there?? The more reliable looking models require some parts, would be good to get some idea of the pros and cons of the best models. Ans also,...are they worth it at all?
@staltus6 ай бұрын
I use the solder scroll quite a bit. I used a generic PETG and it works great for me. Love the format of this video.
@kaizoor5 ай бұрын
The hose snake weighted base has potential to be a vacuum clamp. Just give it a small holes to connect the underlying chambers and print the base in soft TPU to get a bit of squish. A bit like the dust collector for whole drilling in a wall.
@DCUOChaosDynasty5 ай бұрын
for v-Roller I would suggest you to remove the screw from the filament guide, it will work better and it won't damage the drill bit, I also cut a pipe right at the output pipe of the material
@joshuaarce67106 ай бұрын
Great video, thanks for printing and showing us these tools. I will definitely print a few. Keep producing and I will keep watching. Thanks again.
@filiepmaes90716 ай бұрын
Great video, looking forward for the follow-up.
@nickfury12793 ай бұрын
I’ve printed two of the solder scrolls so far. One on my modified Ender 3 V2, and another more recently on my upgraded FYSETC Prusa MK3S clone (by upgraded I mean I swapped out parts like the rods, bearings, and hot end, among other parts, for genuine ones from Prusa). Came out better quality on the Prusa, but the one I printed on my Ender 3 V2 works very well too
@groberts19806 ай бұрын
Great video! Big fan of project recommendations (or "stay away from" recs). You mentioned PTFE Lubricant in the video. What is that? I've just been using silicon lubricant for parts that need a little more slide.
@thenextlayer6 ай бұрын
I think they’re similar…
@ericolofsson6 ай бұрын
Well they sre two complety different lubricants ptfe have solid particles mixed in a fluid and silicone lubricants are silicone fluids. Making them withstand difference pressures, chemical amd so on. One specific thing to note silicone are very hard to get rid of and spreads/easily contaminate other surfaces. A lot if indutries ban silicone all together since it repells paint.
@Radtke_Makes5 ай бұрын
Its neat to see that i wasnt the only one that had issues with the solder spool. i JUST got done with the v-spooler print in all ABS when i watched this video.. so good to know that i am on the right path, nice video!
@boqs4 ай бұрын
Thanks for a great video. I printed a similar vice, but I used a tap and die to remove the seam for the screws, and used alot of lube. Mine works great, but I did also use a different design, so might have also just be that. Steel screws would be better though, but its not always easy for someone to cut them to an exact size without a.... vice... This video format can be a great series. Looking forward to the next video for functional 3dprinting models!
@PhilipThonbo5 ай бұрын
Threads needs to be printed in 45 degrees to distribute force over multiple layers
@TheCrookedMenagerie5 ай бұрын
I liked the solder scroll I think I used about 0.05 or 0.07 compensation on my solder scroll print on my Bambu using turned overture PLA I might retry in PETG to boost the heat resistance
@BlueEyeDK29 күн бұрын
the V-spooler is absolut worth a print , there is a addon to it so you can mount a motor to it, and add some rubber feet and the noice i way lower... i printed it in PETG and iv respooled between 20-30 spools and every thing is still working fine
@epicjosh06 ай бұрын
I’m torn. I love the channel and have been subscribed for a while. But he said if we subscribe there will be less dirty jokes. But I like the dirty jokes. So now I don’t know what to do.
@thenextlayer6 ай бұрын
More dirty jokes it is!
@BboyFuze5106 ай бұрын
Definitely would love to see another video like this! Been looking at spoolers recently and the V roller was on my list! It’s now on my next took to print! 🔥
@thenextlayer6 ай бұрын
Looks like I'll do another, people seem to really like it!
@BloodyMobile6 ай бұрын
6:08 is the reason why I don't like print-in-place things. If anything breaks, you got a piece of junk. With assembly, you can minimize what needs replacing. And in this case, the pin should've been a separate piece, so it wouldn't break off.
@Dbone32115 ай бұрын
I made the fractal vice design, it needs work, and has a large amount of hardware
@CrystalNetwork6 ай бұрын
Regarding the respooler. Never had an issue with the pastamatic. You just have to follow the print instructions carefully regarding infill and walls. Also dont go ham. Go slow with the driver...never broke anything
@thenextlayer6 ай бұрын
My issue with the pastamatic was that the TPU flaps were not enough to stop the spool from continuing to spin if you stop with the drill.... This one, when you stop, it stops, because it's direclty driving the master spool.
@CrystalNetwork6 ай бұрын
@@thenextlayer Ah yes i understand. I also have the tpu flaps but they dont do much. I just go slower with the drill when i see the spool almost being empty to combat this.
@WRZ_4505 ай бұрын
I did the V-roller out of PETG with the gears being ABS-GF and it has worked so well. Absolutely love it.
@MrThePaprika5 ай бұрын
Hi for the vise actually galaxy or different glitter filament are not great because they have a way higher friction. Also a bit of silicone lubricant could be really great
@ljadf6 ай бұрын
I had so many attempts at finding the right part online, I always design my own because at least it'll do exactly what I want it to. It's worth designing every time.
@itsdrew.156 ай бұрын
I love this format! Thanks for testing these out for us so we don't have to waste kg's of filament on something trash. Saves a lot of time and money. Thank you!
@JKarleАй бұрын
I shouldn't be laughing so hard at your innuendo jokes, but I am! Seriously however, another excellent video. I have not watch one yet on your channel that has not be informative and enjoyable to watch. Excellent work, delivery, and selection of topics. Keep up the outstanding work.
@thenextlayerАй бұрын
Thank you so much! I'm glad you're enjoying the videos.
@bobbylox6 ай бұрын
If there's going to be any load, screws should be oriented horizontally for printing, otherwise the layer boundaries are normal to the stress direction, which causes problems.
@htcworx6 ай бұрын
Nice video, thank you. Looking forward to part two.
@thenextlayer6 ай бұрын
More to come!
@carneliotophat65126 ай бұрын
The vice’s main screw would hold a lot more resistance if it was split in half so it can be printed flat, maybe making it a T bolt type screw.
@juandavidruizserna6 ай бұрын
great video, good analisys of the designs and great to have sugestions on what material to use or how to give them a better use.