I Asked Diesel Repair Shop CEO What Is The Most Reliable Diesel

[@ultimateLOLman]

Homeboy backing up out of the frame at 3:40 has me cracking up 😂

[@jundialhaqiqa9907]

I was just about to mention that

[@milesra22]

LMAO facts 😭

[@reddzrzrrider1086]

Yes… His name is Kyle… He has a few warrants in a few other states… Other than that… He’s a great guy who always shows up to work on time and never calls out… I just hope he gets those warrants handled before it’s to late…

[@dunzzo3718]

@@reddzrzrrider1086sounds like a goat

[@reddzrzrrider1086]

@@dunzzo3718😂

[@Inspector694]

He didn’t even mention the 12 valve Cummins! That engine is right up there with a 7.3 power stroke if not better.

[@maddawgnoll]

The 12 valve is hands down the most reliable ever. But they started out as tractor engines so that makes sense.

[@fireant1272]

12 valve most reliable!

[@blacksheepautoworx5304]

I would say hell off a lot better no high pressure oil system to fail, 5.9 p7100 vs 7.3 it ‘s Cummins all the way on that front

[@GreatWhiteSquid]

I've owned both. And no it's not

[@blacksheepautoworx5304]

I work on them for a living and have 3 rams a 12v, 24v and a 6.7, from my professional opinion is I have seen more problems from 7.3 compared to 12v. Again I bad o-ring will make a bad day and a big bill. Still can’t find much on a 12v it’s fully mechanical

[@jtrocktree5409]

2007 chevy 3500 duramax lbz 304.000 no problems yet , pulling 10 -14000 all the time , oil change every 5, 6 thousand fuel filter 10thousand rearend is getting worn , everything works , only 2 other people have ever driven it,love it , 12mpg pulling , empty 15 - 17 mpg love my chevy .

[@techs1smh13]

Great trucks

[@paulskopic5844]

Apparently the 12 valve Cummins lasts long that they have never had one come in for repair?

[@30minutesLess]

They're easy to work on, so despite your joke, I wouldn't doubt it, lol

[@brett9860]

2006 5.9 cummins, last year no emissions. Best, easy to work on and great power and mpg.

[@dodgeking9194]

Cummins is the only true truck engine on the market 30-year diesel mechanic here all 18 wheelers use on inline 6 does Chevy Duramax is and powerstrokes may be alright engines but when it comes time to work on them they're a pain in the ass

[@dcuz1255]

2007 half year 6.7L was the last no emissions cummins.

[@patrickroach7289]

Why would the interviewer not even inquire about the 5.9 Cummins? Its like it never existed. Odd.

[@GreatWhiteSquid]

Because they're trash

[@jimh.412]

Because it's in a piece of sh*t truck.😂

[@patrickroach7289]

@@jimh.412 I will give you that but it is a reliable engine.

[@WackOPrimeJr]

@@patrickroach7289 Yeah I will stand with you the 5.9 Cummins is a really good if not the best diesel when it comes to pickup trucks, but the truck itself was horrible, one of the worst trucks out there that's why the 7.3 takes the cake in my opinion because the body doesn't fall apart like a tin can.

[@dirtbikesanddiesels978]

They break more than 7.3s especially cr cummins

[@victorjeffers1993]

Man here with a 2002 Dodge 2500 4x4 with 6 speed with 5.9 Cummins it has 332,428 miles on it no major issues with the engine minor oil leaks still running original injectors and original turbo ! I have changed the exhaust to 4 inch from 3 inch put a cold air intake on it bigger exhaust manifold and bigger air intake horn to help keep it running cool when towing up the mountains here in Tenn.& North Carolina bought it new in 02 best most reliable truck I've ever owned ! I do have an Edge 5 stage comp box stacked with Smarty box ! If I ever have injector trouble or turbo trouble then I'll upgrade the injectors to 100 horse injectors with a comparible turbo ! But right now it's doing fine ! Plenty of low end torque & decent top end torque ! I tow a 16' car hauler & a 10,000 lbs camper with this truck ! Awesome truck !

[@dodgeking9194]

Same here man 2001 Dodge Ram 2500 4 x 4 6-speed Cummins 8 foot bed 460,000 Mi on it no problems ever with the truck no oil leaks no injector problems and whenever I do have to do anything on the engine it's easy to work on Cummins is the only true truck engine on the market those power strokes and Duramax or just made for the pickup truck Market flip the hood on any 18-wheeler today you're not going to find anything other than an inline 6

[@rsbreeze]

The 2024 Chevrolet 2500 HD Duramax is the most reliable. I almost have 100 miles on it and no problems at all.

[@JamezEd1tz]

😂

[@Shiloh8548]

😂😂😂😂

[@bwatkins1223]

😂

[@kevinoneill41]

🤪😅🤣😅🤣😂

[@MrTonaluv]

😂🤣😂🤣 100 miles? That much?

[@AustenARW]

He says the Cummins has a horsepower advantage but when it comes to low end torque, the Powerstroke wins. Most definitely the other way around by a long shot and anyone who has driven both - especially in a manual trans config - will agree. The v8 design is more about HP while the inline is more about torque, especially low end torque. Hopefully he just misspoke. I guess they've never seen a 12v Cummins with a manual trans come through their shop so they can't comment about the reliability of those.

[@carter.coleman]

Not really by a long shot, especially with the new high output 6.7 powerstroke there's no competition

[@kwaggs19]

The 2020+ 6.7 has so much more power than the 6.7 Cummins it’s not even comparable

[@VIPSCOOLGUY]

Yeah the 6.7 Powerstroke is 100% much more powerful

[@497SC]

I would agree about the Cummins being top dog in torque 10 year ago, but these new V8 diesels put down some stupid amounts of torque. I love my 6.7 Powerstroke. At 93K miles it’s been very reliable.

[@MrStaybrown]

I don't think he's was talking about rated HP, yet the "power" put to the ground.

[@jtracer96t]

My buddy has a 7.3 with 750,000 miles on it. Same transmission, 3 torque converters. Tows heavy machines. Ive owned 3 now. Just about to hit the 300k mark. No real issues. Water pump recently. Small shudder in the trans in first gear. Needs new up pipes thats it. Been lucky. Solid engine

[@rockstarsofspeed4008]

What year is it if you don't mind me asking? Is it the F250 or F350? 🏁🤔🏁

[@Val-xi4we]

7.3L with original transmission @ 440k miles. Still shifts great. Been doing a drain and fill every 25-30k miles since new with motorcraft fluid. Pan drop and filter change every 60-70k miles. Engine oil changes every 5-7k miles and have never even had the valve covers off it. That does NOT mean its a maintenance free engine!!! Change your fluids excessively (all of them!!!) and keep on top of the leaks and it will last! As for power. Sure it might not beat out a 6.7, but it pulls a 3 horse trailer every other weekend without problems all over TX.

[@middleclassretiree]

@@Val-xi4we yep and pulling that trailer and working is exactly what it was designed to do, too often people treat their diesel’s like race vehicles and just beat the heck out of them, proper maintenance and proper operation and those engines will run forever , it’s actually good for them to be worked ( not beat on) but worked

[@T.I.R24]

Because it never made enough power to wear out.

[@highvel-kq2to]

@@T.I.R24 Kinda like your mom...

[@T.I.R24]

@highvel-kq2to actually it's more like your dad...big, weak, leaks everywhere and controlled by fat b!tches..like your mom. Cope dork.

[@highvel-kq2to]

@@T.I.R24 I went easy on your mom....she took it all in the backseat, and speaking of leaks, she doesnt (her backseat anyway)

[@matthewbeske5156]

Great information.... but I'd rather see info about newer diesel trucks (2015+), as we all know the older pre DPF & DEF diesels were generally more mechanically reliable. Getting harder to find these 20-30+ year old trucks in decent working order up here in the rust belt.

[@jkreviea]

Even the shitty ones, they want way too much.

[@rodleypumpkins4174]

I’ve had a 7.3 ford 6 speed. 06 Cummins automatic. 06 lbz automatic, 08 lmm automatic, 10 lmm automatic. And now a 12 6.7 Cummins 6 speed The duramax for me takes the cake. Specifically the lmm duramax. Never lost a race and out pulls anything I’ve driven.

[@texasN1836]

My dad had a 7.3 ford and a 06 dmax.... the chevy was badass but always would cut power and go into a limp mode type thing.. he replaced pretty much everything on it and it always had that problem..sold it

[@DavidWade-fm3pb]

Throttle position sensor

[@fireant1272]

They never ever get the 12 valve into the shop. Its the most reliable by far

[@Mr_Clean]

They rusted out

[@toneyo4794]

My dad has 97 12v and runs like a champ.

[@WackOPrimeJr]

They fell apart before it could get to the shop.

[@vinnie8495]

The 2020-2024 6.7 powerstroke is highly reliable platform and the best diesel ! The 7.3 powerstroke and lbz duramax and 5.9 Cummins strong reliable engines

[@dylansmith697]

I definitely wouldn’t say best diesel but still decent

[@jacobcarter5923]

The 6.7L powerstroke is only good if you get the DCR conversion by S&S

[@nathanrichardson4855]

6.7 powerstroke is incredibly prone to spinning rod bearings, cp4 injection pump and its subpar ccv design.. I’d say it’s far from the best engine out there. Makes good power though!

[@theliberaldestroyer3796]

2002 GMC Sierra 3500 SLT Crew Cab Dually Slung a exhaust valve cylinder 8, drove another 1500 miles. Never quit on me, rebuilt the engine in my garage at 301,500 miles, destroyed the suspension and differential, replaced entire suspension and replaced the diff with an 18 wheeler 6 planetary gear differential that kept the same axle and bearing firment, aftermarket turbo (delayed wastegate) Complete paint job, 245s all the way around, garage built and welded front and rear steel bumpers with brushgaurd. Ive changed my oil every 6-7k miles, fuel filters every 8-10k, clean the air filter and oil it every 5-10k (really depends how much dirt i see caught in it) here it is 329,000 miles and still getting 20mpg, will smoke the tires, oil is still amber yellow clean, peppy as all hell and has the rear end to pull any and everything I want it to. The Allison 1000 5 speed? Is the last man standing and has never been touched. It has literally outlived everything else around the truck. Still shifts like a dream, smooth and efficiently. I love my LB7, would not trade it for anything. In my opinion its the simplest to fix and maintain, best fuel economy ive ever seen on a Dually and I absolutely love how they sound. Definitely in the Top 5 in Diesels

[@theliberaldestroyer3796]

I should mention this truck for its entire life had a 9,000 pound welder in the bed 24/7 since 24k miles and my Papa didn’t abuse it but he definitely worked the shit out of it

[@herrprepper2070]

40 years ago, I bought a brand new 1984 GMC K2500 with J-code 6.2 diesel. 350,000 miles on it and it’s still working as our livestock water hauler.

[@RunGargle]

World record is a 5.9 Cummins with 1.7 million mile !! Can't argue with that😅😅😅😅

[@LazyRC1]

Love my 03 5.9 HO. The problem is keeping the Dodge from falling off the Cummins.

[@dodgeking9194]

Cummins is the only company that makes a true truck engine it's an inline 6 just like every 18-wheeler that runs the road today

[@RASSCAL16]

How about them TACOMAS!!!🎉…………………………..

[@kdw75]

I love the Cummins 5.9, but I have to say that it seems like every part of my '99 Ram 3500 that is made by Dodge was crap. Luckily, most of the drivetrain wasn't made by them.

[@steverempel2728]

Hey, you bought a Cummins, it just came wrapped in a Dodge.😂

[@kdw75]

@@steverempel2728 I know several guys that put souped up cummins in their F-350s since they hated Dodge, but liked Cummins.

[@middleclassretiree]

The 7.3 was a very under stressed engine and in my opinion after driving semi for close to 45 years and being in the industry all my life that is the biggest factor besides maintenance in longevity, there’s a reason the price of a factory warranty from Cummins goes up in price the higher the power setting/rating on a specific engine like the ISX 15 for example the warranty price between a 425 and a 500 is huge

[@rono3045]

He's never worked on a 12 or 24 valve Cummins I guess none of them has never entered his shop, so there you go that's the real winner the one he never brung up

[@josephchambers5400]

Had a 6.7 Powerstroke 6 speed trans with 261k miles. Never changed fluid. Then it started to shift very aggressively so I had a trans flush and it made it night and day better

[@reggierico]

When you say that the 'older' Duramax engines are among the top two, are you referring to pre DEF fluid engines, ie. before 2006?

[@KurtKoster-s6t]

This is a good interview,but you can't leave out Cummins 12 valve,for reliability

[@codyostertag8831]

2011 6.7 Cummins here and just hit 250k on it! 4th gen’s deleted are the best truck you can get. had mine for 15 years, don’t drive like a tool and stay on top of fluids and it’ll be kind back to you. 6.7 Cummins all the way

[@steventhury8366]

I have 2- 97 Ford 7.3s. Both still run great. My thinking is their longevity is because they're not tuned to give max horsepower, thus, less stress on engine parts and drive train parts.

[@stevejeremiah2876]

I had a 95 and 2002 with 7.3's, loved the motor and hate the ford trans. Rebuit the 95 E40D trans at 70K and replaced the 2002 R4100 trans at 120K, Swithched to Ram 3500 with 6.7 with the HD Aisin trans. On my second with a dually and love it!!

[@Springfield2016]

On the trans service, draining about 2 quarts, need to put in a drainplug, every 50k and then refilling will help keep the fluid clean while not causing the problems from a full service.

[@johnurbanski8486]

What about the 5.9 Cummins?

[@Dieselthedog185]

There is no way the old powerstroke or dmax is more reliable than 12 valve

[@kennardjohnson7875]

There is a diesel mechanic in Blanco tx. That says that the 7.3 is supior to the 12 valve,but he will say the 12 valve is a excellent engine. When you drive into bam's shop you will see 50ty diesel pickup trucks and 60ty days wait time.

[@WackOPrimeJr]

The 12v is great if not the best diesel in trucks, but the truck it's sitting in is junk.

[@crpony]

I remember daily driving a diesel Mazda truck that had a reliable engine. The rest of the truck was showing it's age but the engine always started and ran great.

[@michaelbrewer3372]

Thank you for the video. I'd be most interested in the most reliable modern diesel...as if I were buying a new one off the lot tomorrow.

[@tonycoffee7335]

These guys speak truth. At my company we use Ford 6.7 And 2015ish Duramax.

[@coryhiatt9152]

I’ve had a 7.3 powertroke, plan on injectors every 5 years (regardless of maintenance schedule) and glow plugs every other year, water pump every 5 years which costs $450, compared to $80 for a 12 valve Cummins which can be changed out in less than an hour, ever changed out a 7.3 water pump? It sucks

[@BarryMcCockiner1]

I have an old Diesel Dodge with 2,000,000 miles. Never had an issue. I actually haven’t even changed the oil in the last 5 years. She runs clean

[@dylanahlberg2054]

Not even mentioning the older 5.9s like the 12v or the pre Common Rail 24v is just blasphemy on most reliable diesel engine. Dodge was killing ford in the diesel department up until the 6.7 Powerstroke released. The 5.9 has always been the strongest engine when building power and staying reliable. Yes the 7.3 was great but you could not throw any power to it or else it was just an older 6.0. The 12v is still one of the best engines to build from stock if you want to make power while being reliable.

[@tomgentry6409]

I never had a problem with the motor on my truck but the transmission had to be replaced at 75 K miles I never did a break job on it it had 210 k when I sold it, it had massive break pads on it

[@joaquincortada1483]

Has anyone heard of putting a little transmission fluid into your diesel every time you fill up? A friend of mine's mechanic recommended this

[@ShepherdOfTheSilkies]

I got a 2011 ram 3500 6.7 Cummins that’s just been maintained with a eco tune, inline dual fuel filter and bypass oil filter. Filters/oil get changed once a year. Got 376,000 miles mostly hotshotting for a time. Only thing that gave out was the 68RFE at 130,000 it got full rebuilt inside/billet guts now and shifts like butter.

[@justinalderton7485]

The aison6 is a better trans than the 68rfe

[@ShepherdOfTheSilkies]

@@justinalderton7485 yeah but when I did that their weren’t drop in ready Aisons in the junk yard, the 68 I got now is stronger than a stock aison and shifts smoother.

[@roxyhelfrick767]

I have had several Cummins and in my opinion the 5.9 Cummins 12v is the most reliable

[@phsycopiano]

5.9 Cummins first gen most reliable hands down .

[@Donengineer]

I have a every day driver modded 2000 Dodge Ram 2500 4x4 Cummins 5.9. Have not had any other diesel truck or van beat me yet- I smoke em at 125 mph- dodge,ford,Ford, etc- smoke them all- its a blast!

[@GM-gj8hs]

I think this was good Contant, should’ve been longer with more questions on maintenance and preventative maintenance. I would like to see a part two also with a different dealer and a different mechanic shop.

[@formula19]

Good questions and content esp about the transmission. Keep it up. 7.3 all the way 🇱🇷

[@wyattboothby5285]

LB7 Duramax owner here.. I agree that the 7.3 is probably the most reliable. I say this because I'm literally sitting in my 7.3 F-450 tow truck with 491,000kms (you can do the math for miles). It's running up to 16-18 hrs a day, with about 50% of that is idle time. It gets zero maintenance. Not by choice, it's the company I work for. They don't have a maintenance program for their equipment. The trucks get maintenance when they break down, and even then it's usually just an oil change. I've been driving this truck for 3 years and it's never had filters done that I can remember, don't think the fluids have been changed in ages. Diff fluid smells like rotten frogsh*t, Not even the oil filter has been changed for a couple years because the rear main seal leaks oil like a shotgunned bucket. ( I have to dump a half gallon in every 10 days or so.) So I guess they figure the oil never gets dirty, so why change the filter? I don't know what they're thinking or why. But my point is that I work this truck for 12-18hrs a day, towing heavy loads, often working the PTO for long periods. I put about 300kms a day on it on average, and when business gets slow, it idles sometimes for hours between calls. Damn thing hasn't been shown any mercy in the 6 years I've been with the company. And she always starts in the morning, and she always gets me home the next morning. As for my LB7 Duramax, it's not far behind on reliability. It's got it's quirks, for example I'd prefer the injectors to be on the outside of the valve covers instead of under them. So it's not major surgery to change them out, but beggars n choosers n stuff... It's got almost 385,000 kms on it and she purrs like a kitten and pulls like an ox. Not a puff of smoke, even when I'm hard on the throttle. Even despite being mildly upgraded with some go-fast injectors and an edge evolution tuner, it still blows nothing but hot air out the back. A couple things the Duramax has that the 7.3 simply can't even get close to is (in my opinion) #1: fuel economy! I average about 18.5mpg Hwy in my 3500 Silverado Crew cab, long box, 4x4 dually (just sayin, it's a heavy ass truck). My 7.3 tow truck drinks about 12 mpg on the hwy. It's not even close. In fact every 7.3 I've ever driven was a diesel pig, some worse than others. Had an old flatdeck F550 with a non turbo 7.3, and I tell you.. with your foot to the floor, 0 to 60 was probably about a minute, and worse with a concrete pump towing behind. And the second thing I personally like about the D-max vs the 7.3 is.. (and I know it must be an illusion because I've seen the numbers).. I find the D-max has a longer torque curve. It keeps pulling hard no matter where the rpm's are. Whereas I find in my 7.3 that it's gutless above 2,000rpm. And I've driven several 7.3 tow trucks over many many years, so I'm not basing it off only 1 engine. The 7.3 will pull anything, just not quickly. The Duramax (older ones) will pull anything, and be quick about it. My vote for Best overall Diesel engine is split between the old 12valve Cummins units and the 1st gen D-max LB7. Wow, I ended up writing a damn novel here. It's a slow night, I haven't had a tow in hours, so this happens.

[@rockstarsofspeed4008]

If I would to get a 7.3, what years would you recommend and if I should get a F350 or F450? 🏁🤔🏁

[@beauknowz]

Good video! This would have been a great video had they talked more about modern day diesels. What combination of engine & transmission? Then separate that answer to which transmission is the most reliable. When/how to service transmission? Which of the big three manufacturers have the best warranty to go with the truck? Which of the big three manufacturers have the best extended warranty if they offer one and is it worth it? what have they found to be the best oil to run in these engines especially in cold climates? Additives? How often should you change the engine oil? Filters?

[@jusinburton5286]

Why wasn't the 5.9 cummins mentioned?

[@DanielMeyer-ls5ph]

My cousin just rebuilt the Caterpillar engine in his big rig with 3 million miles on it. Caterpillar is the best.

[@MatthewC137]

I drove a 7.3 from 2000 to 2010 and it was good but not as good as my BulletProofed 6.0. I've had zero problems with it or the truck it's in. It is just better all around.

[@storminnormangunworks4911]

What about the reliability of the 97 and older Toyota diesel engine in their Landcruisers before they switched to the gas motors in 98

[@billylo2010]

2004 2500hd gmc diesel with 569,000 and still running strong. Pulling my skidsteer 3-4 times a week with ease! Best truck I ever owned

[@bentleyfatheree1616]

159,000 on my 2018 L5P and no problems yet. 259,000 in my 2010 Duramax with very few problems until I totalled it

[@maddawgnoll]

So wrong. Not the most power, nor the most torque (stock) but definitely the most reliable is the 12 valve cummins first gen, and early second gen dodge ram 5.9. That's why people are willing to pay 30-40 grand, sometimes more, for a 30 year old truck.

[@joetarpley1066]

I Agree Completely. I have a P-Pump,12 valve 5.9l (1998.0 just before they changed to the 24v in 1998.5), 3500 Dodge,5 speed, 4x4 that I bought New myself and I have been the only driver. It's without a doubt The Best Diesel Truck I've had. I've had 0 issues with it. I have pulled Crazy Big Loads with it passing Everything on the road. It's 26 yrs old and still going Strong

[@maddawgnoll]

@@joetarpley1066 I've got my grandpa's 94 with a 5 speed. He ordered it specifically to pull a big fifth wheel. In 98 we took a 6000 mile trip across the country. They only offered a single cab so it was kinda tight while traveling but I'll always remember them. I was fifteen then. In 2020 I was offered 40 grand for that truck. Only had 110k miles on it at that time. So under 150k. It's still in my driveway and I'm glad it's still there. Sure miss my grandparents.

[@Brandon_Nelson92]

The 7.3 powerstroke and 12v 5.9 cummins are very comparable in longevity. The 12v 5.9 is more reliable than the 7.3. The 7.3's HEUI fuel system is far more complex than the 5.9's mechanical fuel system. Both engines are easily capable of 800k+ miles when maintained correctly. The 7.3 will require more maintenance along the way. The 7.3 sits in a better truck than the 5.9 does, so the 7.3 still gets my vote. I've owned both. I'd rather deal with a bit more maintenance on a 7.3 than deal with owning an older dodge truck.

[@rockstarsofspeed4008]

​@@Brandon_Nelson92What years would you recommend and would it be a F250, F350 or F450?

[@rockstarsofspeed4008]

​@@Brandon_Nelson92What years would you recommend, and would it be a F250, F350 or F450?

[@buildurtruckurway9118]

When it comes to older auto transmissions. Just change the filter and fluid in the pan. Never do a flush idc even if its only got 20000kms or miles, Never flush it. I change the filter and oil in the pan every 75000kms its a $50 service that's never failed me and my trans fluid has always been clean.

[@7sins979]

Cp4 pump costs 10 to 15k... are you replacing the whole engine with it?

[@kills456]

How many more 6.7 are sold vs the others?

[@OverlandandOutdoorPursuits]

I don't even know why the 7.3 keeps getting brought up. It's so slow, underpowered and outdated it should already be forgotten. Almost any gas engine made today in a Full-Size truck outpowers it LOL. My LBZ was an awesome Diesel. No DEF crap and had great power once I straight piped and tuned it. What an awesome motor that was and I kick myself in the but for selling it. I actually got fed up with the DEF Diesels that i bougth a 7.3 gas ford and man do I miss diesel power. Now I'm wanting to go back to a diesel and trying to find me something I can rely on. I may go used.

[@MrTonaluv]

6.7 Powerstroke HO baby! Total beast. 500hp 1200lb ft of torque. Come On Man!

[@T.I.R24]

On paper...real world...not so much.

[@rich7447]

@@T.I.R24 The power is there once you get through the first few gears.

[@curtischung1009]

You realize those Numbers are measured from the crank not wheels. Also Cummins make there peak torque at low rpms when equipped with 3.73 gears.

[@rich7447]

@@curtischung1009 Cummins make their peak torque at low RPM regardless of final drive ratio. The current Cummins ISB hits peak torque by 1,600 rpm which is the same place the Powerstroke does. The Cummins just redlines a little earlier than the PS>

[@jaketryban8772]

Cummins has less torque low and than the new stroke. They also changes things on the motor that made my buddy go to Ford. He was Cummins since they started. The 5th gen’s suck

[@coryhiatt9152]

12 valve Cummins hands down, I’ve had them all😂 Simplicity equals reliability

[@bentleyfatheree1616]

Ask questions about the trucks being sold now. It hard to find the older trucks for sale

[@milesra22]

My dude at 3:40 was like “oh sh!t, sorry man” 🤣😭

[@Precisionmobile]

12valve cummins is 10x more reliable than that 7.3 i can promise you that

[@That_1_E90]

Not 10 times. I’m a dodge guy I like the 5.9 better but 7.3 is really close or just as good. Ide even say the 24v is better than the 12v

[@Precisionmobile]

bahahahahahah thats cute 24v is just a big peice of electrical junk and the 7.3 is ok but its still a pos@@That_1_E90

[@maddawgnoll]

​@@That_1_E90if they put the p pump in with the 24v I think you might be right. But that's the real draw to the 12v. That injector pump was/is one of the best things paired with a cummins

[@blackwoodechoes]

12v is more reliable than the 24v except for the HPFP (high pressure fuel pump) you just put the vp44 from the 24v (this will make your 12v sound like a 24v) and you got yourself the most reliable engine

[@Precisionmobile]

@@blackwoodechoes vp44 is electronic is absolute junk 3 plunger rotary pump with horrible cooling you got it backwards buddy a 215 mechanical p7100 injection pump is king of reliability that's a sin to put that junk on a 12valve

[@jjr902]

Dream Truck….97 Ford F350 quad cab XLT 7.3! ONE DAY! 🇺🇸

[@powerstrokecentral]

They are beasts!

[@hazmat4795]

Mine will be past down, many offers have come my way, and I have never even considered letting it go.

[@packingbone1953]

Ford has more low end power over Cummins? Lol

[@Hoghunter245]

Haha dudes got it backwards

[@AustenARW]

He has it completely backwards.

[@zephead843]

What a crock. These guys are either on dope or they're sharing the same bed.

[@randyjedneak8698]

Cummins low end toque at 1900 rpm red line 3200 all v-8 have wind up a lot higher to get same toque v-8 redline in the 5000 rpm range Cummins for the win

[@deltapapa82]

Cummins all day.

[@caseyramseyer9874]

None of them created the diesel or their diesel. Power stroke use to be made by international, Cummins is made my Cummins, and the duramax is made by Isuzu

[@timothydare6007]

Why I like the Fords. The new ones are Fords. Ford engine and ford Transmission and Ford Body. Chevy is Duramax Isuzu. Transmission is Allison and Dodge is Cummins with Aisin Transmission. And the New Dodge Trucks are made in Mexico not USA and the Chevys. Look inside your door jam. Both my trucks say Made in USA.

[@jamesoutland6706]

Yeah I was gonna say pretty sure the 6.7 power stroke is made in house by ford.

[@chosen118]

​@@timothydare6007The new "Dodge" after 2008 is not even a Dodge. It's a FCA Ram truck. Nowhere on the truck or title work do you see the name Dodge anymore. It is owned by Fiat or FCA.

[@fz0gtg]

@@timothydare6007Dmax was a joint venture between GM and Isuzu. Until 2007 the design was done in Japan by a combination of Isuzu and GM Powertrain engineers but mid 2007 GM took over majority stake and moved the design to Michigan. The engine has until recently always been manufactured at the joint venture Dmax plant in Moraine Ohio! As for transmissions they were either manufactured by Allison a subsidiary of GM or by GM directly so the driver lines have always been under GM control! I’ve worked at all three engine manufacturers Cummins in Walesboro In, Navistar in Indianapolis In, and Dmax in Moraine Oh and can tell you that each of those sites were world class diesel manufacturers who cared very much about their customers!

[@curtischung1009]

@@jamesoutland67066.7 PS motor is built in Mexico.

[@gregdavis19]

So I bought a new F-250 in 1985 and I had the 6.9 , do you ever see those motors anymore? My understanding is the 7.3 was a bored out 6.9. For small diesels you can’t go wrong with a International. International used to build a diesel DT466 for medium duty trucks and it was a work horse you just couldn’t kill it. It was just a great engine.

[@teresad7174]

Would have been good to list the top 3 most reliable in order. Not a ton of 7.3's out there at this point. And they can be in rough condition overall even if the engine is solid.

[@kmeinh7097]

Great interview. It's funny I use tonhate diesels cause of smell. Then an investment man told me about 7.3 n how he bought a bunch new and kept in storage n flipped them for profit cause they're Saught after

[@dylansmith697]

English must not be your first language huh

[@anonymousanonymous3926]

All time Best diesel engine ever produced Cummins 12V, least amount of problems occurred during longevity Duramax, mostly seen in a shop being repaired Power stroke. All In My Opinion based on what I have personally witnessed working hands on. I’ve witnessed these top 3 engines run well over 500k miles. Maintenance is obviously the most important. Take care of it and it will take care of you.

[@michaelkraemer8965]

I got an Lb7 336,000 miles all factory. Zero leaks. Zero issues. All it does is drive.

[@corradettimotorsports360]

I would say for ultimate reliability and durability - the Gen 1 Dodge Ram Cummins would be my choice for most reliable. The Problem with newer diesels are two fold: Gov't emission regulations and customer power demands, both those are making the engineering process much more complex, which leads to less reliability (as it ages) and maintenance requirements throughout the ownership years.

[@josephchambers5400]

I would say the 7.3 Powerstroke would be but 1st Cummins are very reliable too

[@jakey20022]

Dodge RAM Cummins The 2nd generations were solid as well.

[@real-vb8ou]

pre emmision cummins are superior

[@rockstarsofspeed4008]

​@@josephchambers5400For the 7.3, what years would you recommend and would it be a F350 or F450?

[@josephchambers5400]

@@rockstarsofspeed4008 pre emissions so 94.5 to 97 with the 03 Intercooler upgrade. Or any of the 00-03 ones. Newish interior and motors push out alittle more power

[@ritoandandy2147]

School boy is wanting to hear his 7.3 is the best motor out there. Pushing to hear that. I have both and the 7.3 has given me way more problems than my 5.9. 5.9 has been super solid

[@RemingtonScarborough]

my buddy has a 7.3 and a 6.0 and his 7.3 has never given him any issues well over 400k miles while his 6.0 has soooo

[@rockstarsofspeed4008]

​@@RemingtonScarboroughWhat year is the 7.3 and is it a F250 or F350?

[@666dynomax]

2:58 tire rotations?????

[@RichardWatts-wm5xx]

I WOULD SAY 7.3 FORD,HOWEVER THE TRANS.HAS 2 PUMPS TO UP THE TOWING.THE BUTTON IS ELEC.THE PUMP WILL PRESSURE UP,TO MUCH AND BLOW.FULL REPARE FOR A SMALL PUMP.

[@robfigulski1139]

My 6.0 went 434k miles.. You have to spend some money to bulletproof, but once you do, its good..

[@chumps7974]

I didn't expect to here anything but power stroke engine being the most reliable on The Powerstroke Central KZbin channel

[@djffe8597]

TURBOS?! 2016 F350 65K on my 3RD Turbo. First one under warranty at 44K second one 64K basically same fault with the impeller.

[@petejansen7220]

That’s great guys,I agree that the 7.3 diesel is a great engine,but it hasn’t been used since2003. I would like to know what is the most reliable diesel engine that is used now,like maybe in the past 5 years.

[@raymond1868]

Ask gale banks hes been tearing apart diesels for over 40 years. He recommends duramax. They have always use the displacement of 6.6 liters. And manage to still crank out more horsepower and torque every year without changing the displacement. Cummins and powerstrokes have different displacements. Also you cannot beat isuzu and the chineese at building diesels

[@obs1996]

5:10 dont change your trans fluid Me over 40k since changing it: uhhh whoops?😂

[@hallocz31]

what about diesel cars up to 3.0l?

[@mikewarren1401]

The 7.3 in no way is better than a 5.9 Cummins. That 5.9 was put in all types of medium duty trucks. Inline is always better than V8 in diesel configurations

[@stevenbrooks1243]

Really shut the hell up seriously 5.9 break to man seriously

[@NTGMITZA]

Hate to say it but 7.3 were built the best, stock 5.9 can certainly out pull a stock 7.3 but longevity the 7.3 takes the win. I’ve used all of em at work pushing them to the limits. 7.3 just look at the rods on them not even the new 6.7 Cummins rods are as big as the 7.3 still have the heaviest and biggest piston rods to date, it’s to bad they didn’t keep the 7.3 and went to the 6NO

[@mikewarren1401]

I have seen duramax with over a million miles on them

[@Alaska-g5y]

@@mikewarren1401yea and there’s a ton of 7.3s over 1mil

[@chosen118]

You can go to KZbin and see your comment out the window. There are many videos of 7.3L Power stroke literally catching the truck turning over a million live going down the road so push but push evenly.

[@jaimerodriguez1332]

7.3l pickups are the kind of pickups your grandkids will be driving. For many generations

[@meganw6007]

😂🤣😂🤣 at 3:40 the guy walking into the frame then backing out with the awkward face 😅😅

[@Robert-gs6cr]

7.3 reliable but heavy (off road) starters terrible changed so many I got to where I could do in less than 15 minutes on side of road.

[@devin3156]

Guys they are not necessarily wrong saying the 7.3 is the most reliable diesel engine, it’s simply because they have never seen a 12 valve in their shop, they don’t break so they don’t even know it exists.

[@herrprepper2070]

Today’s hat-on-backwards pickup owner needs all that power to haul bags of kitty litter and a case of mineral water.

[@burnz163]

Sound like a bunch of guys who don't know a lot about diesel. lol Anyway, they are all good engines and all have their problems. I bought a 6.0 back when nobody wanted them and went through it. Even after putting 10k under the hood I was 5k under what a comparable Cummins would have cost. 12 years and 340k later she's still my everyday driver and runs pretty damn good. The likeliness that someone would be able to take your advice and find a 7.3 is very low considering it will most likely have high miles, rust, worn out steering and transmission or a combination of all of them. And if you can find one with low miles your gonna pay comparable to a used 6.7 for a 25 year old truck with no power! These new 6.7 powerstroke trucks will go 750k if you run fuel treatment and drive like a responsible adult. Install a cp4 disaster kit for piece of mind.

[@ivankorth4458]

Any opinions on 3.0 baby Duramax ?

[@jkreviea]

I think they're going to really come down to if they're modded, and if so, how much. Mild mods are probably okay, but anything more will take its toll.

[@chickasawranger759]

Can’t tell you the best, but I can tell you the worst. Ford 6.0. I’ve had divorces that were way cheaper……. And I got rid of my last one. I lost friends. Because I realize we were only friends because we had 6.0s. We no longer had anything to talk about.

[@devin3156]

You obviously don’t exactly know what to do to make them last, the 6.4 is much worse.

[@Barabus-yx2cn]

Yeah, the 6.0 could be reliable if you did $25,000.00 aftermarket bullet proofing. Without that, they're garbage mine made Me go broke and I did all the work.

[@chickasawranger759]

@@Barabus-yx2cn I tried to do the bullet proofing to late $10000. 170000 miles. Broke me. Had to buy a 6.7 truck. No regrets there.

[@devin3156]

@@Barabus-yx2cn def don’t need 25k to make em reliable. Especially if you know what your doing and don’t tune the piss out of it. I was just saying to the other guy that the 6.4 is much worse than the 6.0.

[@reza829]

All engines have some sort of issues. I know for a fact that most diesel shops will tell you that they would be out business if it wasn't for power stroke or duramax

[@baker967]

So what, these dudes go through 12v cummins constantly? I have only had to rebuild one in a packer because the crank gear spun, but i would pick working on a I6 engine rather than a v8 anyday

[@jeffcoxen1386]

7.3 Was my favorite truck!

[@sbfnation2535]

Powerstroke for life 6.0-7.3 to the front

[@rockstarsofspeed4008]

what year would you recommend and what would you recommend, a F250 or F350?

[@CameronFeltz]

@@rockstarsofspeed4008 for a 6.0 stay away from early years. 05-07 are decent. Late 06 and 07 being the best.

[@blakecochran7101]

7.3l powerstoke. Will run on a gal of oil easy to work on.

[@djtherock7062]

ive had the duramax powerstroke and cummins in my buisness the ford and dodge hold up better under extreme conditions we use chevy for the light stuff

[@leewalker3514]

I also run two stroke motor oil in my fuel every other fuel tank on my 24 valve Cummins 05 model

[@guymann4016]

“What’s the most reliable diesel, but only talk about the 7.3 please.” -interviewer