I BOUGHT A BURNT 2018 FORD F-250!

What's going on guys in todays video we bought a 2018 ford F-250!
Check out my brothers! Channel / 23rdgarage
Subscribe! ► / vtuned​​​​​​​. .
Instagram ► / vtuned​​​​​
Check out Safety Restore! www.safetyrestore.com
----------------------------------------------------------------------

[@johnf8877]

Wouldn’t be a vTuned video without the usual SamCrac paper weight making an appearance.

[@hungryalien]

LOL

[@Crazycarlisle]

Tell me you’ve never had to wait on parts without actually telling us . Go watch more KZbin

[@paulipeteri7938]

SAMCRAC should have Stepmom in more videos!🥰

[@kiwibobnz9812]

Not only the samcrac Paperweight The V tuned Paperweight as well

[@markstevens1729]

@@paulipeteri7938 oh stepmom is in lots of videos alright…

[@ronaldmoparornocar9590]

Might want to think about burying the power cable from the pole to the building so you don't catch it again or if you have an employee at some point when you get big enough and get your self a waste oil furnace.....old oil,trans fluid, brake fluid, power steering fluid, diesel,ect on things you have to have records of recycling/disposal is antifreeze and battery acid/ old dead batteries worked in the salvage/parts industry for 20+ years tires absolutely suck but it's part of the game best thing to do is not allow them to pile up I don't know what the cost is per tire now but last I knew was$1.25 per ....... have a covered area to store them so they don't fill with water and we would stack batteries on a pallet and when we got 40-50 we would bring them to the scrap metal place and sell them we were getting $5.00 a battery back then I don't know what it is now.there is money to be made with it... just look at LKQ... and all your buddies that are rebuilding vehicles should be using recycled parts instead of dealership parts..I mean somethings you have to buy new but it's a miniscule amount....oh and maybe get with your local scrap guy and see if they would put a couple 10-15 yard dumpsters in your yard......one for brake rotors and drums that's #1 prepared and one for core engines.... and old radiators knock the plastic tanks off and get them flat and stack them on pallets also.... just some knowledge sharing for you....or you can tell me to go shit in my hat..😂......👍👌

[@bobspatafore1696]

I love that you all are smiling and having fun during the process

[@shcaskey]

"save the engine" ?! you're a glass half-full kind of guy!!😁

[@muskokamike127]

Congrats on the forklift, you SO needed 1. You can make all kinds of attachments to mount on the forks to haul, pull, or push vehicles around. When you lift from below you run the risk of damaging the undercarriage. I had a shop in a storage building and they had a piece that mounted on the front for moving around boats on trailers (ball). They also make great mobile frame racks. Press the forks against the frame and use the other end to pull. (you've already done this). They are great for removing truck beds too. Build a frame out of 2 x 4's that slip under the bed rail and up she comes.

[@emmanuelnjibaloh4829]

Man you got lucky with the power line. Just me more vigilant when moving that heavy equipment

[@stuartfact8361]

That motor seems pretty far gone, but I love your enthusiasm!!!

[@user-ht1xu4gv2u]

Yeah. Buy. A. Whole parts truck 2 door and switch stuff

[@user-ht1xu4gv2u]

Rolling chassis worth. 3k

[@muskokamike127]

13:16 "not that's not sketchy at all" lol

[@Whippdf150]

The mustang got left out to die again.

[@thesinwagin]

I mean...didn't we all know that was bound to happen? Had he completed it, it probably would've weighed in at like 4500lbs..lol

[@frankportigiano1910]

Finish that Mustang and I guarantee it's gonna be a looker

[@NWSTRX850]

Seems so 😢

[@wyattgardner3552]

He started the mustang 3 years ago... I gave up watching all of his videos. I didn't even recognize him when I clicked on this truck video. He has put on serious weight.

[@Whippdf150]

@@wyattgardner3552 He got married. It happens.

[@RobToGame]

Drill a hole in one of the forks big enough for a hitch ball and you can move anything that has a trailor hitch. You can also make some fork extensions out of rectangular tubing pretty easy so you dont puncture anything on the bottoms of your cars when you lift them.

[@highlysuggestible861]

Yeah also removes the risk of a strap finding its way off the end way safer when you're jiggling stuff lose.

[@AutoAuctionUSA]

Wow! This video had everything - a burnt truck, a new forklift, and some sketchy electrical work at the end! 😂 I can't believe you guys scored a diesel forklift for only $6000. That thing is a beast! Pulling the engine out of the burnt truck was pretty impressive too. I'm guessing you'll be able to sell a bunch of parts off of it to make some money back. Although, that burnt aluminum in the cab doesn't look too salvageable. Good call on not messing with rebuilding a truck with a certificate of destruction though. Unless you want a giant paperweight, that is! Can't wait to see what you guys do with all those parts and the new shop truck! Also, good luck getting the power turned back on! Maybe next time avoid the power lines with the forklift. 😉

[@taurota1554]

Awesome as always.Thanks for sharing and taking us along

[@tylerward6723]

Used to work alot on these type of forklifts. It's pronounced Daywoo. Cheers!

[@kerrywaldrop4546]

You should get you a couple of those cargo containers so you can put all your body parts in it

[@M1LAD81]

Hello Veniamin, lovely work. I enjoy watching you, you're like grandson. The Forklift has Daewoo written all over it. Not Doosan, this was made before Doosan brought Daewoo heavy industries. Should be a solid forklift for many more years. Good, Veniamin.

[@toafy1014]

Ben, you could strip the melted parts off the engine check it turns by hand then take heater plugs out, connect the starter motor too a battery pack and do a compression test on the engine, just an idea. I have used burnt motors before and been lucky, and i always do that test before refitting an engine wether its had a rebuild or just replacement and never fails. Just an idea but worth a go to know condition of that engine

[@bwhaggis199]

Love the different content from building a car to tearing one down for parts awesome love it

[@peterseitz3476]

Hi Ben, very interesting content. I'm happy to see the hard-working Jack with you again. Keep it up and good luck with your new business.

[@CJMediaOfficial]

Forklift is clutch! Congrats Ben

[@zzxpyw]

Check out a turbo max nozzle that attaches to your pressure washer wand. It delivers a much stronger spray!

[@terencesoutham4262]

Maybe you should make a Jib for the forklift, could be good practice for welding

[@husseinhaddadi5446]

Will support you with whatever you post as you are a legend

[@plinyTheelder1967]

you guys need some shop coveralls with the logo embroidered on the back.

[@ericpinkney384]

You need to aquire a set of extra long forks for the doosan. Thanks for the great content! Cheers from Edmonton, Alberta, Canada

[@sphinxvet]

What Doosan?

[@GreenGang420]

Heat-treated frame rails 😊

[@Deadfeat]

Heat changes the metal properties. Can't reuse any heat damages.

[@ronbachman1431]

Funny, always enjoy the video !

[@bozidarkilibarda3391]

Yesterday had so many uploads that I almost missed this beauty

[@bricktonyb]

Yay Jake is here! Missed ya bud!

[@luisalbino7799]

Saludos desde 🇵🇷.Yo empecé a ver el canal por el Ford Mustang y todavía sigo esperando la continuación y conclusión del Mustang .No le vi sentido en parar ese proyecto.

[@raynavarra]

Nice job. Any shop that does the heavy work you do, realizes the value of a forklift. IMHO, a forklift in these situations is no different than having a ratchet and sockets for the assembly. It’s necessary.

[@bobbyd7140]

Nice work 👏 👌

[@muskokamike127]

15:25 that rolling chassis would be perfect for someone who bought a copart special with frame damage....

[@2movu1]

great vlogs and content!! please oh please get you a cat tail for the wind noise

[@sazman2000]

its a DAEWOO fork lift and yes they are a good fork lift. nice job

[@caseyspeer8179]

Yeah I can't wait till you get back on that mustang that thing is going to be a beast especially if you get a whole like text-to-speed and all them people or get it even get a hold of Cletus

[@michaelhawkins5530]

Looks like the transmission may be salvageable?

[@92trebuchet]

Need bring back your old wide body mustang

[@marc5460]

tnx for the video

[@MrJvl1960]

Koo koo jake back👊

[@knight2425]

Not worth saving the engine, at best water has gotten inside from the intake so it will have rust in the cylinder walls and maybe bottom end also which isn’t right trying to sell it off to someone else, with the amount of heat around the outside just about every bolt on is knackered along with much more so it needs to be scrapped

[@bigsquatchsasfoot1964]

Forklifts rule …man toys 💪 Ben’s chop shop lol always said there’s so much more money in taking them apart than building um up ..good on you dude you never stop working that’s what it’s all about 👍

[@BrucePierson]

I have my doubts about that engine being good, but the transmission should be OK. Good that the frame is still OK for your cousin.

[@kevinbonville]

Great job !! Looks like the wife's feeding you well and taking care of you !!!😂

[@BassManBobBassCovers]

Definitely a lot of money in trucks. It's just hard to say how much of that engine is salvageable. But you guys know what you're doing 100%

[@williammccabe3767]

Hi Ben, I think you pronounce Doosan as day woo ie: daewoo 😂, love your channel

[@RJSDZNS]

Do you guys have a full steel recycle bin yet?

[@TheUnderGround979]

Poor Mustang rotting outside.

[@MrWoodyBalto]

It's just doing Mustang things.

[@AN-eo9pf]

I was just thinking the same thing

[@user-ht1xu4gv2u]

Get a container. For. It​@@MrWoodyBalto

[@AN-eo9pf]

What happened with the mustang in the background. Bit off a bit more than you could chew.

[@conor7154]

This channel has gone through about 7 mustangs, only two of which were working at the end. I’m not even kidding. He tried to build his own frame for one and cut one in half like 4 years ago and was mocking everyone who said it will never be finished. They destroyed multiple mustangs in the process of that.

[@user-lt2ru8yf1g]

V you should start looking for a empty property to start building V tuned huge warehouse/shop. good to see Jacob coming around

[@YungCwalk]

bruhhh you should keep one of the burnt panels like patina. Adam LZ did that with his mustang it looks pretty cool!

[@terrallputnam7979]

Good for you Ben. What brakes? Brakes are for quitters. LOL Forklifts are a must for a body shop. They life beds off, pull cars and trucks around lift damaged suspension vehicles, and sometimes serve as a portable frame machine.

[@pierrelabbe3173]

Wow V.T. Canada love Québec merci M T.L Montréal 😮

[@bobobrazil1973]

Lot good parts on that truck.

[@photographybyonchiri5924]

number 1

[@teddyjnr]

V-tune over in England we call the forklift or its pronounced day-hoo or day-whoo

[@michaellambie8427]

Vtune.. the transmission on the new is about 8 k . Used one 2000 is a steal for the person buying it

[@derrickanderson4932]

Nice Video.

[@edwinmonterroza7426]

I wonder if we’ll see the mustang running one day

[@keithsutherland9800]

Im surprised you took it apart, as in pieces it takes up more room, and you could of stripped out the back and cab as parts sold, the engine was the main thing to check out first,

[@USA01930]

he said his cousin was buying the frame

[@keithsutherland9800]

Okay 👍,,, I thought you might of looked for a late one to repair, as that gives you a lot of parts,

[@JUST_ONE_ID10T]

even a 2018 is worth rebuilding but since it's for deconstruction only. You had no choice. I would of looked for another tuck and used this one for parts for the other. Could even be a badly rolled over one and this would of made a great parts truck. you should have a good frame. bed and maybe a cab from that truck. maybe the engine if it's not rusting in side from water being sprayed to put out the fire. the cylinders need scoped and the oil needs drained and the oil pan dropped to get all the water out. But if the cylinder walls are pitted it may not be worth doing anything with that engine.

[@iki911]

I saw one of these trucks on the highway leaking fuel. I was behind him. I told him maybe he didn't listen.

[@AutomotiveEvangelist]

Worst comes to worst, that engine could be sold as a core...and that's still good money on those.

[@waynek921]

V.T. why didn't you rebuild the F-150 cuz w/ front end work. You difntly had it.

[@westeraz]

keep it up

[@craigmorgan4676]

Gl with it brother, lets get it....working!👌👊💪💪💪

[@JOHNABLANK]

The paint job on that forklift should be a breeze! Lot of rust forming on that Mustang! I hope that will be worked on soon.

[@laptopuser3323]

G'day mate how's it going

[@dancurrier6421]

what's the updates on the burnt Ford pickup

[@tomswindler64]

Nice job guys,fords are easy to tear down.get yourself a dump trailer and as your tearing vehicles down,throw the metal from the vehicles that you remove into the trailer,easier to haul to the scrap yard, and separate the aluminum from it,worth more.great video 😎😎😎👍👍👍

[@kvboyd]

Super duties catch fire because the plastic fuel filter gets full of debrees that was filtered out the fuel filter cracks. I caught my leak in time because it was seeping at the seems.

[@smsjr36]

Why not a trac skid steer- better traction and versatile (interchangeable attachments

[@babajidesorungbe5376]

The background tunes in your videos are vtuned

[@videt_scit_dicit]

I really don't like burnt cars, even if they're rebuilt. So, the burnt smell never goes out. You should put in there, a very strong car freshener after rebulding.

[@jrodea174]

I like that he’s wears a Judas garage jacket ! Supporting others !

[@JoseRodriguez-ti2ii]

Need more chop shop vids😅

[@dancurrier6421]

😮 needs new tires

[@MazichMusic]

Nice parts truck.

[@brendanhartnett7829]

Next video needs to be you cleaning up that fork lift! It could use some TLC.

[@Utubegofukurself]

2 things: Lifting straps & a freaking oil drain pan!

[@KevinMurano]

Doosan d30 is a great machine

[@Sebastian-Pereiro.]

отличная покупка👍, за сколько купил этот форд????

[@Djeisjsjsjoowiosls]

Mashallah, honorable work.

[@terrellupshaw1433]

Would have been a perfect truck to rebuild

[@rgbigdog]

Get some fork extenders for when you want to move the vehicle that don't run and have flat tires.

[@lyf6626]

Number 7 🙌🏽😅

[@RandySmith-iz1ml]

I think the forklift name is pronounced Day-woo.Guess you'll need to completely replace the wiring on that Ford.

[@STVR-46]

This engine is waaaayyy long gone

[@gregm8941]

On your last 3 or 4 videos the audio has been really bad at times. Remote mics are cheap.

[@kikurass322]

The forklift's name is pronounced DayWoo :)

[@angeldelacuesta336]

Paint it with a epic design on it

[@jimcobm3]

Hey Ben what is this black BMW M2, is it a parts car?

[@CGF101]

How many part trucks do you have now lol

[@OlderthanIlookyoungerthanIfeel]

I've driven forklift quite a bit in my life , and that brand of forklift isn't by any means the worst . My favorite forklift was made by Hyster , and strangely enough my least favorite was made by Toyota .

[@adrianowen6524]

Good idea ben parting vehicles out like that could be a nice business if you going down that ways bro and youd always have parts on hand jf neaded ever to!. 👌👌💪💪👍🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@edwardsimmons3721]

Too bad about the power line. Always something when you’re having fun.

[@user-zu6zu4yu2s]

You should buy to a wrecked like 1st gen coyote mustang and cut the body off of it and put that old mustang on it. Would be cool

[@messithegoat_ctx9602]

How long do you take to rebuild a car like this if you only focus your time on this one car?

[@thatdave86]

Suggestion Don't use load straps for lifting ,get the correct lifting gear or chains and hooks . Hope that you are getting some containers to neatly store the parts and even cars outside otherwise your yard is going to be overrun with mess ,that's something that the audience will always see in the videos . Sams Ferrari ?

[@wilfredocaban3542]

Keep BEN AWAY FROM FORKLIFTS HE'S DANGEROUS 😂😂

[@philtucker1224]

The short-block should still be good if it’s cast iron? 🤔