I Bought A Truckload Of Amazon Tool Returns

[@JohnMaleckiUnscrewed]

Get 20% OFF + Free International Shipping @Manscaped with promo code UNSCREWED at manscaped.com/unscrewed #manscapedpartner

[@timmytenders8536]

You wanna mail one of those drill presses to VA?

[@JamesSchulte]

Isn't Manscaped a scam?

[@chucknaround5271]

And send me one. I NEED a drill press in the worst way😂😂

[@Raymo2u]

I need a drill press John!

[@j__d__r4284]

Drill press to Jersey?😭

[@OceanusSeafreeze]

Can you do a truckload of Adam and Eve returns?

[@butterz1011]

🤣🤣

[@_DJ708]

Adam & Eve Tool Returns might be a dirty job to dig into.

[@helpas345]

Dude yes 😂😂

[@d.r.3397]

I wonder if he will compare those to ones he already owns? "I can immediately tell this rabbit is a knockoff. The color is all wrong"

[@leppel22]

Get some batteries

[@thomasfloyd6714]

I'd like to believe some guy somewhere accidentally drunk bought 20 drill presses instead of 2 then returned the rest only for all of them to end up in the hands of a different drunk buyer. Well played bezos, well played.

[@jordanpetrick4496]

Sam is the reason I watch, his comic relief is great

[@BaileyTheGoofball]

Same

[@s33ur3lv3lvly]

It’s so good.

[@joehernandez3041]

I've been purchasing tools slowly. Found a table top bandsaw on clearance at harbor freight for $99.00 last paycheck. Gonna build a table for a jobsite circular saw and find a decent low cost saw. Drill press would be right after that. I'm getting a lot of ideas from your videos. The wife actually ran across your videos while looking for videos on resin. I'm a little old to be just getting into woodworking, but it's great to see something I'm building take shape. Keep the videos going. KZbinrs are really helping take the fear out of starting new hobbies that can eventually turn into businesses.

[@imdonewithyall]

I agree fully with almost everything you said but one thing. You're never too old to learn something new! Unless you free dementia, but otherwise you're never too old. I have a friend in his early 60s that always wanted to learn how to weld but never did and said he didn't want to spend money on it because he's too old. So I bought him one of the cheap welders off Amazon, was under $200 and did everything he needed for learning. He combined that with the knowledge he's gained working his entire life in different jobs, ranging from sewer technician (or whatever the job title was, he didn't go too much into what he did, mostly talked about the smell lol) to long hall trucking to working for the city on maintenance crews and got himself a great job doing maintenance at a bottling facility. You've got this! Just remember to have fun!

[@129stacey]

You are never too old!!!! Go for it!!

[@EAST69TTV]

I work at a cabinet manufacturer with tons of access to wood, I really need to get some tools. I work 12 hour shifts as a boiler operator ( I basically watch a fire burn all day lol. I really need to use my time here to wood work. I've access to massive amounts of free wood, really should take advantage.

[@pagedeveloper]

I have been buying these return boxes for a while now. Love how they claim that the cost is this, but when you total it up it is not even close usually. Also the other things is that so many of the items are just trash and need to put in the dumpster, it is difficult to believe the total cost.. Love the way you do this.

[@sparrowhawkTTS]

Not certain why John has back and shoulder issue… Sam and Joe are the ones carrying these return videos. Lol

[@twiztedclown]

And their paycheque comes from whom again?

[@ryangrissom3532]

Great comment, Sam and Joe will love it and John will love the shit talking. 1 comment gets all 3 to like it possibly

[@martinpedersen4886]

Power coating technology hole, with an arrow pointing, should probably be on the back of a t-shirt 🤣

[@ogvideogamer]

🤣

[@krishuhn2184]

I absolutely love that your unscrewed channel, unlike some of the other "uncut" ones that cropped up at the same time, posts like clockwork and full videos. Not just little "repeat of full-length main channel" shorts. I know when I get up Sunday morning for work, I have you guys to look forward to. Thanks, you guys!!! As far as who I favor for this race, I love John's loud boisterous ways, but you have to admire Sam's luck, and Joe is just a bit quiet. Sorry I can't pick. 🤪

[@JDLoLNo7]

With the drill press you could weld a grill that rotates food and or have a set up to have a rotisserie set up to cook half a pig

[@jbeach2010]

John Malecki, Sunday morning after work, hell yeah! Let's go john, get your win on this one!!!

[@AnnaWooH]

Or just after midnight/Monday morning¡!

[@CarlJorgensen-k7g]

Morning, I’m 79.. a great drill press, will help me to help others, mine is not a floor model with a new one. The one I have will be given to a person that really needs it too…. your show is very entertaining. Just got off of COVID-19 and getting ready to go back and clean up the garage so my tools I can use when I was younger. I realize that I’m going to need tools that I could handle when I got older and that is what happened.. I got old. Wish I lived closer to you so I could visit and watch you guys work. You got a great team your friend Carl.

[@xgothams_herox1992]

John is the reason I'm really interested in woodworking. You make amazing videos so plz keep them coming.

[@billd1947]

As a former woodworker, (now disabled), watching you guys open this stuff is a HUGE part of the day!

[@Steelythestacker]

@@billd1947 I'm disabled as well, KZbin allows me to live vicariously through so many people doing things I can barely do or can't do at all any longer. It sure beats the heck out of regular television!

[@GeoffDelaney]

Best wood working show since the new Yankee workshop. I watch every weekend!

[@BearWuzHere]

YOU get a drill press! And YOU get a drill press! And YOU get a drill press!!

[@Steelythestacker]

John channelling his inner Fonz to slap the door open. Classic And I take offense. I am watching on my TV and have been subscribed for a very long time. I'm an OG Yinzer.

[@129stacey]

Ha! I said the same thing

[@Ohio-Patriot]

Glad to see Joe pulling out the win right at the very end😂😂. If John is interested in selling one of those drill presses, I’d absolutely be interested in buying one from him. Great video guys. I love these returns videos. They’re funny as hell!

[@RogueGinger87]

Sam the Pallet Whisperer for the W!!!!

[@samwilliams2006]

I done the same in ordering but it was off home depot. A great deal of Milwaukee tools.

[@raidersader4277]

Respect working through all the injuries

[@dragonsez]

Well Sam will do it again so good luck

[@mrs.4681]

Can we all agree that Sam is a national treasure?

[@bobbywong9392]

Love the stuff you guys do on both channels. Willing to be you 3 had fun while doing this and all the other return unboxings. Don't get too squirrelly, guys. Have a good rest of the weekend and stay warm out there.

[@Riegs36]

John i always root for you as a small business owner myself 🎉

[@shawncaudill424]

Absolutely, love this channel. It's amazing You guys are awesome and great wood workers.

[@dantebarto]

My wife yells at me all the time for bringing a bunch of unnecessary crap home. You’re giving me bad ideas.

[@probably3dprintingsomething]

wheeling a new 13" drill press in, "honey, he had 6... I had to help"

[@wesleyfoster6418]

You guys have my dream job. Your amazing wood workers and you get to buy random crap no one wants.

[@wilso845]

Wow the first pallet was a heck of a find.

[@EAST69TTV]

Well I've sat here at work and watched the whole video. I love your guys content and wish you all the best of luck. I found your channel a few weeks ago and have now watched all your videos lol. I really enjoy all of you guys and your attitudes.

[@davidsee3553]

There is no reason why the next video shouldn't be a mobile workstation with a drill press, a table saw, and an artman mounted on the Ranger.

[@hwells64]

Seriously, a drill press would make my dad's whole year, he lost his truck coming to pick me up in utah, we've been fixing an old chevvy so we can get back on the road and that would help in so many ways

[@ChaceHagerman]

You should start a pawn shop and sell all of the return tools you bought over the years

[@TheSaviourOfHumanity]

1:20 in and watching how carelessly john picks his pallet I am placing him third place. Sam will win

[@129stacey]

When Sam “listened” to the pallet, that said it all 😂

[@SayWhuuut]

Bossman needs a win... i vote for John!

[@linebackervd44]

Just got into woodworking to help build skills I can teach my son one day. He’s 10 months so got some time! Appreciate you guys and hopefully you got your moneys worth on this one! Go John!

[@bigsteve44322]

Thank you so much for helping me out of the depressive funk I was in for 7 months, my grandma died the day before my birthday last year in March, and your videos have helped me laugh and cry and recover

[@129stacey]

My condolences, it never goes away but it lightens

[@BearWuzHere]

Is it called a “Flock” or a “Gaggle” of drill presses?

[@jnd9444]

Your truckload videos are some of the best.

[@GickelsGaming]

oh hey, John.... Guy-who-had-many-shoulder problems here... Im 8-months post-shoulder surgery. I had a full slap/labral tear with rtc repairs, a bicep tenodesis, and a acromial decompression all in one go. currently 100% recovered at the moment. Until i had it, it was always problematic (years) and on a graph would consistently get worse. Honestly, if you already got the cortisone injection, you may wanna opt for the arthroscopic surgery. its 3mo hard downtime, and 13 weeks min. pt but the quality of life, afterwards dude... sum sum to think about- it really sucked a lot the first few days and first month

[@bradheath4200]

Congratulations my friend. I'm looking at back surgery and NEVER hear good things about it. I need to find a chimp from your neck of the woods that can do different, but the same. Lol 🥃 It's gonna be great!

[@GickelsGaming]

@bradheath4200 it was misery the first few days off the nerve block. back surgery is always dangerous

[@Kellib420]

1:00 John your gonna win for 2 reasons 1) Your tools are your friends. They never judge you for how many times you use them wrong. And 2) Because beer and buying tools is almost always a good decision. Said no one ever 😂 I'm just kidding....love the videos

[@staceym71]

I'm 53, disabled and have a 4 year old grandson. In 2 months I have built my very own workshop. Mind you living on 1200 dollars a month for years, sick depressed, gave up on ever having a good life. My sister gave me a 2 car garage for Christmas, so I scraped and bought used stuff... Last night I was cutting some walnut on this terrible table saw.. well I think it is dead. Haven't had it more than a week 🤬 🤣 I am having a blast though. I've got some hysterical videos of what not to do. Love your stuff!! Some you tube creators are, not entertaining or don't really teach well you do both. Thanks for helping along this bucket list journey, Johnny is my choice

[@michaeldonley3478]

Congratulations Joe!!!!! Love seeing John go down in he’s own games and money spent!!!!

[@mgguy1898]

Im a poor guy here. If yall ever wanted to bless someone with some of your excess tools for woodworking, could really help me get into it. Not one to ever ask but the squeaky wheel gets the grease so I thought I’d try. Love y’all’s content and work! Very inspirational.

[@boydstongrove]

A big thank you to all of you ( Especially Sam ) for my new life fail phrase: "Maybe I'm Clark Kenting you guys". This will serve me well EVERY.DAY.

[@lion_bear_warrior]

Got my shop shades right around Christmas, best single piece of safety equipment I own now. I literally forget they are on my face… scared myself seeing my reflection the first day I wore them!

[@OnlyDadsOG]

Joe, production values, cadence, and overall quality has increased by leaps and bounds since you joined the team! I appreciate all of your hard work, and your insights in the videos. You know what you're talking about enough to hang with these knuckleheads! You are a god among men, and it wouldn't hurt to send good ol Dad a giftcard as well.

[@davidharbert6399]

Think of the amount of shop shades you could store in all of those drawers! Those drill presses would be a great start for any woodworking shop (I need one) and what a difference 2 inches makes in price... Great video guys!

[@JonPapineau]

Hey, I vote for you Sam. I been doing your workouts religiously and I gotta say, my material handling skills have improved exponentially!!! Thank you, the material I handle thanks you too

[@courtneygubb2840]

Have found your channel recently and love watching trying new tools and comparing rip offs, love the honest feedback as well helps people out when buying tools. Would love to have a wood work shop at home one day to build my own things. !

[@SOLT_Mark]

Rag tag woodworking and unboxing. Couldn't be more fun!

[@kevinccake]

love these videos !! my fav is the banter between you and Joe!! it makes my day !!

[@edsterry3172]

12:56 love John's emphasis on saying down with that hand gesture 😂

[@anthonychristy9239]

Ya'll should do a return pallet of returned "Kitchen Tools", I'd love to see a take on "Fake french fry cutters", knock off Stand Mixers, and 3rd party smoothie makers.

[@whatshellydoes7308]

I'm with you on that 💯 especially as John loves to cook!

[@katom2111]

The skidstreer plate is for make your own attachment.... For someone that wants to weld something on or whatever so it fit in the slot......

[@msfortune8015]

You guys just tickle an old gals heart. I love the camaraderie you guys have! Thank you for your vids!

[@teamtrouble2003]

Thank you, guys, for all of the entertainment you provide. Awesome videos.

[@jasonstiffey6434]

I have never wanted to get into wood working more than when I found and started watching your channel ! Love it guys keep up the good work !

[@brandonbrame1171]

Drill press palooza🎉

[@jimfurlong214]

Joe pressed his luck and was able to dill down to victory! It was a true work of Art(man)!

[@Squaidgiver336]

Shoutout to John’s editor. One of the best in the game right now. Hilarious cuts

[@melissaj9851]

My husband and I love watching you guys do these kind of videos. If John is going to get rid of some of those drill presses, I'd love to get o e for my husband.

[@mohamedhumaid1507]

Your video inspired me to get into woodworking, and I'm currently in the process of buying tools to start. I'm really enjoying your videos!

[@g.e.fourie5672]

Well John you getting closer and closer so maybe the next one. 😂

[@davidsharpe7065]

Absolutely the best content on KZbin! You make mystery pallets and everything you do into a huge event and I love it.

[@EJB2255]

Drill presses: find a way to boost the power on them and drill through the the thickest material. There’s no limit on the power!!!

[@atreyusturgill]

Im 15 and a huge fan of all u guys!!!! Lets go!!!!!

[@ParallaxSound315]

These are some of my favorite videos you put out. Absolutely love anytime you buy return pallets

[@ThatsKap88]

First time commenting but John the skid steer plate I used a plate exactly like that to make the forks for my tractor, maybe that's not something you'd be interested in but if you need a set of forks on a tractor it is very convenient

[@RandyHuggins-xg9ox]

I discovered this channel a couple months ago and can't get enough of it! Love the banter between John and all of the employees he has had on. I wish i had a workshop like his. But since I have limited room i would settle for a give away (hint hint) 😂

[@Sieg670]

I have one of those cheap tool boxes. It does the job as long as you're not worried about theft. The two bars is how you secure the drawers in the top part of the box. It's a pain in the ass so I don't bother. I paid 200 (after shipping) for mine but I realized I could have gotten something better on facebook marketplace for that price.

[@ScottHunter-516]

Love the interaction between John and Sam.

[@smithguy3328]

I'd say the skid steer plate is for welding up a replacement part or creating your own attachment.

[@AbsolutionArmament]

That skid steer plate it just for whatever you want to do with it. (Put a hitch receiver, Forks, Ect.) So you'd get something like that with the end goal of modifying it.

[@DonnyHooterHoot]

I GOT an Amazon return for Christmas! A Solo Mega Xl stove. Yes, the package had been opened, retaped and the feet were missing! Solo stove was very nice and sent new feet but still, C'mon Amazon!!! Great viddy! Peace!

[@deaddy9796]

Why change bits on the drill press. Just get a drill press for each size O.o?

[@frikinrikin]

John you got this!!! Always root for the underdog

[@DrRailing]

Great video and congrats Joe. Love the channel. Please make more outdoor mill videos

[@CPthetooladdict]

Just a FYI 24 skids fit on a truck not 6 that's a truck load

[@m_cabral]

That skid steer attachment is for spreading, leveling, and compacting depending on what your forks can be set to do.

[@CWisdom87]

You guys have great chemistry and really make the videos so enjoyable.

[@ambermeadows4787]

Yall should buy a Family Dollar or Dollar General pallet drop! It would be funny as HECK to watch the unscrewed crew go over kids toys, home wares, and have fun with ridiculous garbage. If there is any food product, you have to taste test it!!!

[@rp42069]

31:45 The powder coated bars aren't for shipping. They lock the drawers shut when you lock the lid😂

[@Jlgorneault]

Do a durability test with the drill presses like you did with the drills!just mount one upside down, get some extension cords for safety, and then plug them in and stand back. You might need a bigger arena for this one!

[@BlakHeart666]

Recently found this channel and loving every bit of it

[@tannerbishopofficial2616]

I love watching yalls videos! i was in medical school and after watching your videos i have switched career paths and im going to school to be an electrician! keep up the awesome work! God bless

[@chrisoakey9841]

Now you can make a group drill press. space as needed but link the handles and power so you can do bulk drilling operations.

[@CriticalMass-yu1ec]

Power coating technology ⬆️⬇️➡️⬅️ 😅👍👍

[@nicksmeltzer3511]

I like you John. Your no nonsense attitude is appreciated given that you aren't a D about it.

[@denisbeaudry5396]

Lets go Sam. you are the man when it comes to crushing John in these competitions.

[@cidaosinistro]

Much Love from Brazil, Love the content, the humor in the videos is amazing, the drills fight is my favorite vídeo

[@d.r.3397]

That 15" benchtop drill press could be a nice upgrade to the one I got. It was damaged during a cross country move and has never been right since.

[@mechmotion]

We have three versions of that drill press at work. It started life as a craftsman and got progressively crappier over the years.

[@SargeWolf010]

Go Joe 😂

[@WilliamJones-r6f]

I been trying to tell the wife I want a drill press for months now. I live in leechburg so it's not far for her to slide by and snag one . Love the channel

[@ChefChris08]

That skid steer plate could make a killer flattop over flames!

[@sgtcrtrdnl]

Love the pallet return videos!

[@Goldcrusher]

Holy Toledo. You see the blue tool chest drawers? How do they even work with how slanted they are. Easy call to return that puppy. Maybe made for shop with a sloped floor. 😂

[@jessemills3903]

The skidloader attachment is for grading the soil, during landscaping.