TEMU Torture Test..... I was Surprised

[@ChristopherOBrienPSU]

Let's get a Temu vs Harbor Freight vs Amazon cheapest showdown!

[@spedracer55]

harbor freight would destroy

[@ChristopherOBrienPSU]

@@spedracer55I kind of agree. Maybe @JohnMaleckiUnscrewed can answer the age old question once and for all lol

[@chadsmen2519]

Harbor Freight tools are amazing the baruer and hercules are just as good as dewalt and milwaukee

[@asrr62]

Amazon is gonna be the same as temu right. Drop shipped garbage but it's gotta be better than Ryobi.

[@neeleydev2596]

I agree

[@refactorear]

Great mixture of the seriousness and data analysis from Project Farm and the Torque Test Channel and the carefree TylerTube testing!

[@ceefusjenkins2281]

As another large man, ladder limits are real. I have been told more than once that "that ladder is fine." That ladder is often not fine. Much like lawn chairs.

[@korgan7779]

I feel this..

[@thecasualfly]

being 6'8" beast of a man, I can confirm.

[@ianfinrir8724]

Scaffold limits, too.

[@NeverlandSystemZor]

As Adam Savage said, when you buy a tool the first time... get the cheapest you can... if you use it enough or break it... buy a better one... and only buy a VERY good/expensive one for the ones you USE enough to justify it.

[@MrChrissy1r]

I disagree with that sentiment. As a MASTER carpenter and joiner, O.N.C & H.N.C 60 years in the trade,, as an apprentice we were encouraged, to buy the best of the best, for any given tool, for instance one maker made better saws, or chisels or planes etc etc, and the older tradesmen we worked under as apprentices would have the benefit of their experience as to what make per tool was best, truth is they all agreed, from the newest to the oldest and my college tutors too. Thus to this day I still have and use those tools. Nowadays it's a shame to say "names" are over rated and over priced. So sad to see supposed ""professionals"" using plastic, handled throwaway "hard point" saws, plastic cased electric drills, plastic handled chisels etc etc. A pound to a piece of doggy doo, not one supposed "professional" these days could top, sharpen and set his own saws as we did, and I still do! I have an original Diston panel saw, Diston were taken over by Sandvik, (and I use to have a commemorative edition), double tapered blade, which I bought as an apprentice after saving for months, , sadly I lost a lot of my original tools to thieves but nonetheless, those I have still got are now worth 20 times what I paid! The biggest load of codswallop on KZbin is sharpening, what cobblers there is, I still have and use a double sided "India" stone and I can shave the hair off of my arm with any of the tools that have to be sharp. Fact is you get what you pay for, but often as not "names" are overpriced, whatever item it is!

[@gunners4129]

Always push the torwue wrench down when tightening a wheel. Never pull it toward your face. A coworker a couple decades ago lost his front teeth because he didnt take that advice.

[@_B_K_]

I've had my DeWalt impact for 14 years. Came in one of their affordable combo packages with bunch of other cordless tools, so not like it's their best model. I've been using and abusing it since I got it; lost count of how many times I dropped it and its batteries, and it's still doing just fine.

[@ryanj.leonhart2264]

You should for real build him a wooden truck bed, that would be badass!! Would love to see that!

[@maddogshwa]

+1

[@hydrolisk1792]

I second this!!!!

[@AJ_ghdhejsien]

Wooden truck bed!

[@eldermendez5831]

Yesssssss

[@angrymater13la]

My boss uses nothing but DeWalt, and almost 2 years ago he had a horrible house fire. Several of our DeWalt tools for melted pretty bad and wet from the fire hose but still run great.

[@asrr62]

That sucks what caused the fire. The batteries?

[@Always_Bored96]

@@asrr62 no hes just saying tools still worked

[@albertj2459]

Love seeing your excitement as the impact continued to outperform your expectations!

[@kurtlarson2061]

Riding along at 30mph on the back of the truck to throw the impact! 😂😂😂. That footage was amazingly satisfying to watch

[@Djkidkrazyx2x]

If squirrelly was a thing 7:04 lol, love your channel John. You also have a great crew 🤌🏼👌🏼👍🏼

[@cpl_0503]

Great mixture of Serious Tool Testing and 8th Grade Boys - Hormone Infused adolescents playing with dad's tools in ways no one ever contemplated. I Love It. Hilarious!

[@kurtlarson2061]

My favorite was just John riding along on the back of his truck at 30mph to throw a drill. Can't believe nobody commented on that!

[@cpl_0503]

@@kurtlarson2061 Yep, 100% something my brother and I would have done at 16 and our parents would have been horrified to find out about.

[@Ziplock9000]

Far too much of the latter for me. None of it is funny.

[@c.a.g.1977]

This must be the video with the most John Malecki giggles in it, ever 😆

[@constructionlife5059]

7 to H. The best line ever

[@PuReWiReZ]

I don't think those lugnuts were actually torquing down with all that corrosion, you probably didn't have good surface contact.

[@Dustins_Woodworking]

It’s funny how delighted John gets trying to destroy/torture these tools. Great job.

[@cabman86]

Well, he never grew up ya know.

[@grafyghtgaming8733]

This channel is just pure JM Squirrelliness and Stupidity and I am definitely here for it.

[@crashconstructionunfiltere3829]

That impact driver did a lot better in the drop test than a 12v Milwaukee impact I had that felt off a 6’ ladder and hit a tile floor, then cracked in half

[@atsimas]

Torque channel has left threading bolts to a pressure device and they use that data to determine the torque.

[@capthowdy126]

i use a 18v impact hyper tough brand to do 120 ft lb on all our lugs. its been the best little impact driver we've used, it was dirt cheap cause someone stopped in one day with 2 hyper tough drills an the impact with 2 batterys an a quick charger for 25 bux so we did it to help them out thinking they would be junk but thats been 5+ years ago an they are all still working strong an used daily.

[@ChristopherOBrienPSU]

Hyper tough are surprisingly good

[@enderz0r]

Sounds like you bought some stolen tools. 🤦🏻‍♂️

[@capthowdy126]

@@enderz0r nah we knew who he was, he gets in a hard spot from time to time an he usually brings stuff around asking if he can pawn it to us so he can come back later an get it back an we always do it to help him out cause he almost always comes back an gets the stuff or if he isnt able he lets us know to keep it an we only mkae him pay way we gave him but that day he didnt need much an didnt want to come back to get them so he offered to sell them all for 25 bux, probably got him something to drink but hes a good guy an dont bother anyone.

[@capthowdy126]

@@ChristopherOBrienPSU so far the ones ive used have been, got alittle electric screw driver i use alot an its battery has died on it an its a internal battery but im going to try to swap it out or make it work with a 18650 cause it was a done good an it lasted for yrs b4 the battery finally gave out but it hink it was partly my fault cause i lost the charger an used one i found that was close but it needed weird voltage so i got close but not what it really needed.

[@trigtrigger9794]

​​@@capthowdy126 Seems you guys were a legitimate well trained group. I'm sure that gentleman used you as a pawn shop with good intention , and with honest goods to . Most companies I know will also offer the same service to someone off the street . Just curious , but we always found the broken glass around the tools off putting ? 😂

[@g.e.fourie5672]

Would love to see you compare these 10-in-1 / 15-in-1 type tools with the actual separate tools.

[@RyTrapp0]

YES - we need more multi-tool reviews, and comparisons with standalone tools is a must

[@jamietulloch3258]

Use me as the button to persuade Malecki to buy Sam a new car!!

[@jaspereves6661]

Nah ford rangers are the best they are cheap but bullet proof

[@AnanusBananus]

Use mee, use My butooon, use me, push Le butoon, My m8..

[@ALIENBLADE]

Press me button hole​@@AnanusBananus

[@arnoldm889]

It has to be used car return pallet parts you can use to make a vehicle.

[@NoSaysJo]

​@@jaspereves6661lol next joke

[@gregoryjasongranado5248]

14:41 I found a Ryobi that fell out of a truck in the middle of the street one time and it was perfectly fine.

[@calumsy95]

I can’t fault Ryobi for being hardier than people expect. My wife dropped my impact driver into paint 2 years ago, and that thing still works perfectly.

[@Robbie-mw5uu]

my Ryobi corded drill has been working for 21 years now and I dont know why cause I sure as hell dont lubricate it

[@Heather420]

Yes to the wooden truck bed build! That would probably look so cool

[@josephgraham1065]

nice video. i would like to see some of the Temu layout stuff put up against the Woodpeckers to see how close they are

[@chrisspaulding3243]

According to the 50 temu Super Bowl commercials, we’ve been saying temu wrong

[@sccarguy8242]

Shop like a millionaire

[@marjon1703]

I've got the same china driver but grey/black with 1/2 inch square drive and 1/4 inch hex in the centre for £37 (I splashed an extra £5 for the higher Ah battery pair). The thing is amazing, takes huge punishment and stunningly useful. I lent it to my landlord who bolted together a steel barn for his 3 JCBs with it. He was sad to give it back. For the price I am pleased with how good this device is. I use Festool and such for the exactness, design and perfection but for bashing stuff together and smashing it apart, this china tool does the job remarkably well. (I always wonder when it is going to explode into kibbles though...)

[@EunoiaAnrkyuk]

I once dropped my Makita impact on a 50mm thick pressed concrete slab and it broke the slab, as for the driver, there was just some scuffing/scratching on one of the corners of the battery.

[@jankokuu]

Makita is always reliable.

[@DeCurstis]

You are quickly becoming one of my absolute favorite KZbin creators! I love your content! I’ve told my wife that working for you is what I wanna be when I grow up!

[@Strongfan77]

This more frequent posting is badass

[@3dp_edc]

you should test it with the javi battery vs the makita battery. Batteries can make a pretty big difference

[@dannyb4283]

One thing I'd suggest is giving the model number on them so we can pick it up lol. I like this idea for a separate channel and subscribed

[@brakemaster8661]

I'm glad they didn't have a bigger torque wrench on those ranger wheel because the factory wheel torque spec is 100 ft lbs and they would have just kept going more hahahaha.

[@I.no.ah.guy57]

Yep he's definitely gonna need to replace a couple of those studs and lug nuts after them getting stretched a few times 😅😢 I thought the same thing when he said he'll just max out the torque wrench 😂

[@Lee-At-Green-Pheonix-Rc]

Pretty impressed by the bigger javin on those lugs not a bad budget impact

[@ryansimmons4342]

Maybe not a "torture test" but a mildly in depth test/review on some of the ego tools(power head and attachments) would probably gain alot of traction. I feel like every weekend im cutting the yard i have multiple ppl asking me abt my tools. Alot of ppl still think its a cheap generic brand and not aware of their durability and efficencalty!

[@rasmushunnakko1865]

2:46 he did not say go 1000%😂

[@duanebaker5796]

I'd love to see you compare what you use with Enjoywood and/or GoingMake tools.

[@mw2nerd7]

Ain’t gonna lie as a mech. seeing you just start the lugs with the gun instead of using your fingers really freaked me out

[@Apache-Helicopter-Life]

This guy has to be the coolest dude to work for.

[@fekeith935]

I bought one of those temu impact drivers and it was able to break lose the motor mounts on a 2013 chevy cruze

[@timbriggs2870]

I thoroughly enjoy the channel. I would love to see you test cheap tools that work well and have good reviews. Maybe test them against the Milwaukee, Makita, and Dewalt stuff. A lot of people can’t afford the top of the line tools and would like to know what works well for less money. Do it for the peasants. I use makita and Milwaukee tools, but would love to see if there’s something just as good for less money.

[@CheapCheerful]

You just sold a bunch of Temu JAV Impacts! Great vid.

[@gordonsmith9263]

Contagious enthusiasm John!😆

[@stevenfoster2992]

I haven't laughed that hard in quite awhile!! thanks John for the laughs!!

[@timothyblack6972]

My Husky air wrench is rated at 250 ft/lbs of torque, whereas the Kobalt 24v Impact Wrench I have is rated for 650 ft/lbs of torque and it works great for me, I haven't found anything yet that it won't work on. I have the 20v DeWalt XR Impact Driver and it works great as a wrench as well, rated up to 1825in/lbs

[@randr10]

The old DeWalt NiMH 18V impact drivers were about on par with the Temu mini one, or maybe even a little weaker. If I remember correctly when I tested them it would stop around 35-40 ft-lbs. I also had a 1/2 inch impact and it could barely pull off a 100-ft-lb lug nut. I had to add torque to the nuts after putting them on with that because it was too weak. People forget how bad the old tools were. Now the cheapo import stuff outperforms that old prosumer stuff from 20 years ago.

[@niezwyklyrobol]

Second Javin test Doesn't it says 20v on the battery and you're saying 18v 😁?

[@RameeHamad]

I want to see if the Javin performs better with the mikita battery.

[@zdog90210]

The small Javan impact when it's in reverse use to press the button on top to make all the lights go out for it to continue out That action where it stops is an auto breaking feature when it senses low torque I have the seesii version of that and I love it

[@captkab00m66]

After this you should team up with donut at least to help out that Ranger lol

[@Olliinn]

That would be such a cool collab

[@erinspbrown]

Regarding the Javan 20 volt impact driver because I need a disposable (low-cost and can be broken or stolen and I won't feel bad) Would you please tell me exactly which model that was so that I may order one? It seems perfect for my needs Thank you very much Erin

[@OmnieStar]

now you need to do a test where "Does pushing down make a difference in speed when the screw is already in the wood"

[@I.no.ah.guy57]

To test torque? Just trying to clarify

[@TheROZ]

As a professional listener, He did not say go

[@Joe.shotit]

I thought I said it but you’re the professional. I trust you!

[@ThrdD3gree]

@@Joe.shotit Don't doubt yourself lol. You did but that drill is loud plus Sam's timing is beyond on point

[@louishoey]

Paddle bits go through faster if u rotate with the drill . That sead if u are just blowing threw meny holes say for electrical wire. If u know u know . P.s. my brother got a impact online sorry i dont know brand it came with 3 different size sockets for 50$ he says it will take off rusted lugs ive seen it works really good 💪🏽.ive seen a Dewalt drill hit the ground from a less hight and explode so😅.

[@torridice]

Do the shop shades come in prescription?

[@fixitdanner]

Good stuff, great testing!

[@dannyhunter607]

I dropped my DCF887 impact off a 30ft roof on to cement a few years ago and the handle cracked, but the rubber coating kept it together. I used flex tape around the handle and it worked for another 2 years or so until i reolaced it with a newer model. Surprised the hell out of me. I still have the 3ah battery i was using to this day.

[@Da0R30]

Just so y’all know, it’s easier to set or break torque pushing vs pulling. Use your body weight to push the tool down vs trying to pull the tool towards you.

[@2006klaus]

Fo Sure! Also much safer.

[@n175209cvp]

In the beginning, you should have done flashback footage of the previous video doing the test when you unboxed the tools

[@JaredSVX]

My Porter Cable 18v wont take off lug nuts...damn I need to upgrade to Javin tools 😂

[@bretsubotnik1777]

Good shit, love this channel

[@nonplayablecharacter4815]

I question the lug nut test cuz car lug nuts should be torqued to 80ft/lb and Sam said a typical lug nut should be torqued to 120ft/lbs which would most likely snap the bolt.

[@brianm6117]

My brother has a Bauer impact driver. He's used it multiple times to take lug nuts off before he got a regular impact. Also, most cars lug nuts are torqued to around 80 lb/ft. Larger trucks will be more of course.

[@I.no.ah.guy57]

I would say 75 to 120 for most passenger vehicles and light trucks. With your bigger cars starting around 100. Then big vans and trucks around 100-150. Just wanted to add some more depth 😅

[@cabman86]

I had a Makita once that fell from a 6' ladder. It broke in half at the trigger.

[@cabman86]

I've dropped my Black and Decker from 18 feet and it just bounced. Still works 8 years later.

[@poppamad979]

Hey John, if you bought them from Lowes, you could take it back after you through it off of the ladder onto the parking lot or out of the back of the truck. Looks like the stuff I got in my pallet purchase.

[@treborrrrr]

2:04 I just bought a Bosch and it has the same issue. I was so disappointed I almost returned it to the store. It's such a small detail, but man can it get annoying. I don't understand how you mess that up. I have a cheap ass bit holder that has that feature.

[@russelltherealestateguy7527]

Fun funny stuff. Like your builds also. Keep the content coming. I enjoy watching. Thanks.

[@workhardeveryday1981]

Its now the Whistlin Diesel of tools channel!

[@alexbair2542]

do shop shades do prescription safety glasses?

[@icebear6393]

I have the Ryobi p239 with the quarter inch to 3/8 in drive adapter it's removed lug nuts at 120 ft lb before I'm not going to say it was happy but it did do it

[@I.no.ah.guy57]

Lmao how long did that take to break it loose?

[@icebear6393]

@@I.no.ah.guy57 I've never thought to time it if I rotate my parents tires I'll time how long it takes to break them loose and leave the comment

[@I.no.ah.guy57]

@@icebear6393 lol it's not a big deal, I was just looking for a rough estimate, not exact. I'm just saying that it probably took a second with a 1/4in drive

[@icebear6393]

@@I.no.ah.guy57 it took between 6 and 8 seconds. I was bored and had nothing better to do probably still not good for it I'm just impressed it does it at all.

[@I.no.ah.guy57]

@@icebear6393 hahaha yeah that's a little longer than you want, but 100 ft lbs would probably be a good limit to stay under for that gun with that size shank (1/4in). Is this a full size truck or SUV you're taking the lugs off of? 120 is a little much for a passenger vehicle or light truck, so I'm jw

[@leonardmarinacci4303]

Yes. Build a wooden truck bed. That would be awesome.

[@TravisRayLive]

Those lug nuts are junk on that Ranger. There is no way that thing would have done anything over 70 ft lbs.

[@tenatra]

Fancy flat epoxy wooden bed ranger. I'm here for it.

[@scottcol23]

testing a $15 drill on a $300 piece of lumber lol

[@Robbie-mw5uu]

6x6x8 is $32 at Lowes it aint that expensive

[@cmdrglass5096]

You should have tried the Makita battery in the Temu it could be all the difference for performance lol

[@steelvalleysportsmen7737]

Never seen John have so much fun...

[@albertgerbel8472]

“I mean I drive an electric truck” 😂😂 at least you’re being honest with yourself.

[@Dardrum]

My two year old heat pump motor just gave up the ghost, ya gotta love Chinese stuff. Anyway, what happens if you use detergent oil on something like that motor?

[@christianroach5779]

you should use the mini scuba tank from the 4 wheeler vid and give to evan next snowmoblie trip😭

[@keithkozma]

How about making some shop shades with reader lenses so those of us that can't see for crap without glasses could buy some!

[@Darkstar72SR]

Hallelujah, brother!

[@Robbie-mw5uu]

shop shades like wraparounds so you can wear your prescription glasses under the protective glasses.

[@PolarisRider06]

Does it run better with makita batteries than stock batteries?

[@IntrexinCustom]

I do love tool racing, and the various testing that's a thing nowadays. I do want to make a point, I do woodworking and work on cars. The car side of this is never mentioned. Those impacts, lets be real even a shitty one is good enough for wood mostly. Now cars is where everything is different. I have a rigid brushless subcompact now, gamechanger for the cars. My suuuuper old ryobi impact that came with the cheap set did me well for wood for years. Now the good one im using that sucker on cars, and its impressive. Just saying I think with how you have done ratings with things like squirrels, I think could be applied here. Like a straight trash, doesnt work. Then a good enough to work for wood. Then works well for wood. Then good enough for car level. Just one of those things I love videos like these, but I do know those cheapo tools would actually work very well for alot of people I know. Just not me or you lol.

[@IntrexinCustom]

Lol thats what I get for commenting before the video is over. Old impacts just couldnt do lugnuts, modern ones do have a shot. I do think your torque wrench was off, but still. More real test would be go to a lug you havnt loosened and torqued, lets be real shops and us normal people all have big boy impacts for lugs now. But good tests

[@necrosbowen]

you should do those tests again, with the javn but use the javn battery and use a genuine makita battery in the tool, you would be surprised how much of a difference it will make to torq, longevity and everything else if they are using just cheap cells in those batteries that come with it

[@Resyektt]

I’d love to see this.

[@nunya3163]

Respect the Ranger, the only truck that can actually be worked on.

[@-canopus-513]

Honestly for the price, I cant find any faults with these tools. They usually come with a battery and charger too, so for anyone who's not able to drop the dosh for quality tools, or isn't sure if they'll be using them enough to be worth the cost. These are a great alternative.

[@rulowth4815]

Except quality standards and toxic material xd good luck with that

[@ddjohnson9717]

@@rulowth4815 quality looks good and guess where the dewalt coming from🤣 same factory

[@RobNorton]

That ali g clip 🤣 i need to watch it again now

[@6door6four96]

Those ranger wheel studs 😵‍💫

[@shawncolburn9769]

Torque is measured at the nut, not the bolt head. That might be the problem you’re having with busting the torque on your test.

[@EdHadder]

I Love Your Videos Man ❤

[@mw2nerd7]

Realistically with the lug nut test I have an 18v impact gun from dewalt and I’ve taken many lugs off cars before the only weakness was that actual 3/8 socket adapter that immediately snapped when I tried to take off truck lugs now I have a 1/2 inch dewalt gun that blast lugs like no tomorrow but that 18v gun got the job done if need be

[@Thismightnotbemitchell]

Lets go man, you got me into woodworking!

[@Leroys_Stuff]

Now this is good stuff I needed this today thank you. You did the tests AvE doesn’t always lol

[@scottyellis3442]

Your torque wrench is wrong. There's no way that thing has that much torque, especially in reverse.

[@eligaffke6296]

Since the Makita batteries work in it i wonder if it would perform better with a new Makita battery?

[@richardkirby6691]

Mellif tools would be an interesting one to see they make tools to fit the main battery platforms dewalt makita Milwaukee but at a fraction of the price not if they are available in the US tho

[@austinhadfield6330]

the joy in playing with tools :3 I've been trying to find a ranger for the wife, think it'll make it to Nevada?

[@steve_main]

The argument was "he did not say go" NOT "I didn't hear him say go" stop moving the goal post John :) Respect the game! - Kevin Malone!

[@XhitswishX]

U use the lowest speed on a drill gornthe most power , speed setting whas to high. When u drill into wood or drill large screws use speed setting 1. How lower the speed the bigger the torque

[@jtmcdole]

Can you guys make shopshades that are rated for lasers?

[@emerybryant]

truck giveaway 🤣 itd be fine in my state 😅😂