I Bought an INSANE Manual Transmission For The SLEEPER VOLVO... Why Not Auto?

In this video we install a RPM Transmission Level 6 TR6060 manual transmission in the sleeper Volvo. That bad boy will handle over 1200lb/ft of torque and all the abuse we can throw at it. We also install new clutch hydraulics with the thanks of Centerforce Clutches!
Centerforce Clutches ► www.centerforc...
RPM Transmissions ► rpmtransmissio...
Ium Industries ► iumindustries....
SUPPORT ME HERE! ► / gingium
OTHER VIDS!!
Quick Builds► • Quick Builds
Drift Truck ► • Drift Truck
Rally Miata ► • Project Rally Miata
Eclipse ► • 1G Eclipse
LS Volvo ► • Volvo Sleeper
BE MY FRIEND!!!!
Follow me on Twitter ► / _gingium_
Follow me on Instagram ► / gingium
MY RECORDING EQUIPMENT!!
Camera ► amzn.to/3lVq7J9
Lens ► amzn.to/3yhf168
Microphone ► amzn.to/3q4pv5x
Tripod ► amzn.to/3pOGiZR
Carry Bag ► amzn.to/3rV50uz
SD Card ► amzn.to/3lQdv68
MY FABRICATION/MECHANIC EQUIPMENT!!
Welders & Supplies ► www.usaweld.co... (code: GINGIUM)
CNC Plasma Table ► store.langmuir...?aff=23 (code: GINGIUM)
Tube Bender ► www.roguefab.com/ (code: gingium25)

[@redsquirrelftw]

Sounds like this trans and clutch are going to make a big difference, looks like they're much smoother. Hopefully the metal shavings are nothing serious!

[@_Gingium_]

For sure going 10's as long as this engine holds together!

[@Hard_Right]

@@_Gingium_ it's an ls , if it's broke go to the junkyard with $300 and get another one 😂

[@IamBATMAN2024]

@@Hard_Right it’s rarer ls though. I’m sure he didn’t pay $300 for it 😅

[@Low760]

​@@Hard_Right maybe in 2015 you could do that.

[@jacksonbeck6758]

Going from playing Games to building cars over the years is absolutely insane to watch and learn. Been here since the forza days. Most people won’t know about that!!

[@DevinG.Builds]

Missing miata mondays!

[@OmegaGreedAK47]

Same it’s honestly so inspiring

[@nickperry523]

Bro the forza days were so fun lol he’s come a long way

[@FastNBulbous]

I still smile every time I see your bench vise bolted into the table. You pushed back way too hard on that for years. 😂

[@_Gingium_]

Seriously lol, idk how I did anything without a bolted down vice lol

[@keithparker7412]

The day he bolted it down was definitely a major moment in Gingium history. We should date things as B.V and A.V (before vice after vice)

[@JMRRebuilders]

That filter looks rather intriguing for sure. Also can't wait for the collab.

[@_Gingium_]

Intriguing is certainly a word you could use. I prefer scary. Or sad. Lol

[@JMRRebuilders]

@@_Gingium_ no doubt was trying to be optimistic

[@thatmotoguy7505]

@@_Gingium_ Often after a rebuild you'll see some metal in the filter... Often not that much but might not be anything to worry about

[@_Gingium_]

That’s what I’m hoping 🤞

[@UriyZ9mb8e]

i dont know how you pick out or find the music for your videos but it is always a top-notch selection. exactly in-line with what i would want to listen to

[@_Gingium_]

Thank you brothaaa

[@boostedproblems5139]

A good trans makes a huge difference! My twincharged Subaru had an old beat up 5 speed and i had to wait for rpm’s to drop to upshift. The new 6mt made it much faster!

[@_Gingium_]

Twincharged Subaru? 😏

[@boostedproblems5139]

Yeah buddy, STI Engine with a GT45 feeding an Eaton M90, air to water, meth injection, lots of goodies ! Just got done swapping in a 6speed with a twin disk

[@oldpetyt2289]

​@@boostedproblems5139sick build! I've never seen someone mod an outback before lol.

[@SwavyAvxry]

excited to see the shifts on this trans now

[@_Gingium_]

I don't have an excuse if I miss a shift now 🤐

[@Nothy]

Is it just me or is gingium getting more and more buff

[@Token_Black_Guy]

I hope so

[@bombardier6033]

You'd expect that since he's working in the shop pretty much every day.

[@Deceiver935]

The montage music when you first got under the Volvo gave me Forza Horizon 2 When you first load it up vibes

[@_Gingium_]

Exactly why I chose it 😌

[@ethanjarrard9245]

Used to watch you all the time when you worked in the NA blue Miata. Stopped watching for years and getting hooked on your videos. Keep up the grind💪

[@randomstickguy67]

Definitely running bottom 10s🤞. With the clutch slipper wouldn’t be surprised for this thing to run 9s. Hopefully as long as the engine is healthy

[@emersonb5764]

Glad you went manual. Way more fun. Kids will never understand how rewarding it is to be directly involved with the driving of the car.

[@PistonsProps]

So much work, but you’re doing it all right, no short cuts. Can’t wait to see it rip.

[@WickedMachineWorks]

My guess would be thrust washer putting metal in the filter.

[@_Gingium_]

Yeah bit worried about that

[@WickedMachineWorks]

@@_Gingium_ a hard clutch on an LS can do that real easy.

[@jagharingenyoutube]

@@WickedMachineWorks And the american(wrong) way is to always start a manual car with the clutch pedal down, and that is bad with a heavy clutch.

[@jesse9638]

The panning time lapse looks great.

[@NobiZero]

As long as you don’t have any odd noises, you might still be ok. I’m a mechanic of 21 years, and I’ve seen an LS with an oil pan filled with so much metal, you’d have thought someone threw a handful of shavings from a brake lathe in it. On the customer’s request, we put a good Melling oil pump in it (after cleaning the metal out, of course) and it’s still on the road 5 years and 150k later. Worth a try.

[@Tagiau]

After seeing rpms mainly on cleetus' channel, I forgot they don't come painted red white and blue.

[@_Gingium_]

Haha right?

[@dento4134]

Hey Caleb, Kaleb? Take your pick. Since you’ve got a lift, I really recommend getting a proper stand up transmission jack. It’s wayy easier standing up than on the floor. You can remove/install boxes all by yourself with ease! Love from the UK 🇬🇧

[@veeezis]

I've recently acquired a 245 as well. I'm a car noob, but enthusiastic about it. Got some work ahead of me. Fix the botched straightpipe exhaust, do some legality maintenance, some rust-work. But I love that thunder grandpa to bits. It already has some mean character with it's measly 130something hp.

[@herpsmcdirt]

Dude sittin on the couch at the beginning of the video picking at his face didn't offer up any help picking up that trans lol

[@bbossautomotive3602]

Excited for the dyno day!

[@SSmallwood]

cant wait to see you take it back to the strip

[@_Gingium_]

Going 10’s first pass 🤞

[@mykaelharvey3102]

That camera effect in the first 2 some minutes where it rotates around is so cool i wanna do that lmao

[@Mcwhy]

Damn got clicked baited wasn’t no built trans in the video 😂

[@aeris-mo]

The shifting sound great, fast as automatic on a mechanical, the dream

[@norcaldailydriven]

That plasma table and software setup takes your fab game to the next level! So sick!

[@_Gingium_]

Yessir! So blessed to have it!

[@Low760]

​@@_Gingium_ I would have thought you paid money for it not been magically offered it.

[@speedyblackman5891]

I want to know what would gingium with hair say about all of these builds and fab work that goes into these builds

[@jackcphelps]

I think this one's gonna hit the algorithm I've seen the exact phrase "insane manual transmission" go to the moon in the last couple weeks

[@_Gingium_]

I hope so 🤞

[@SkinnyPedalMotorsports]

My stick shift gbody is close to being done. Wanna go run them at silver dollar? It’s 1/4 mile in Georgia

[@_Gingium_]

Let’s do it!

[@zerodqkov341]

Ohh in excited to watch you guys race, in Mexico ;)

[@SkinnyPedalMotorsports]

@@_Gingium_ always down. It’ll be a whole new combo for me

[@ReyesGaming69420]

i recommend getting beadlocks for the slicks so that the tire doesnt slip too much although it would give it away that the volvo isnt normal...

[@joelkuolas5407]

I know you probably may have already looked i to this, see if the clutch/launch solenoid is a an NO or NC switch/solenoid. Might have to have power applied to it for it to be activated (NC) or might have to have it like you do now, no power as an NO but closes upon being energized

[@ardennielsen3761]

In an automatic transmission they can have a line solenoid on the transmission oil pump pressure release valve that increases the base line pressure actively based on engine load... rheostat piggie back on the TPS to a simple process circuit over a stepper motor... 300lbft to 800lbft ... so it shifts smooth in normal driving and just does it all, Automatically... 🤔

[@austingutierrez2709]

“Gingium Fabrications” just a thought 🌚

[@JamieBainbridge]

Do you have a tailshaft loop? Once you break into 10s here (Australia) that's a requirement to keep racing. Probably good idea anyway just in case. You could make one easy.

[@_Gingium_]

Not yet, I was planning on making one though!

[@mrgmc6314]

Hey Mate , would you happen to know where I can get a spanking vegemite sandwich 🥪??

[@_Gingium_]

Lmao

[@mrgmc6314]

Vegimite sandwich 🥪 ??

[@JamieBainbridge]

I'm responsible for turning multiple Americans into Vegemite fans. Spread it on toast really thin, like see-through, not thick like Nutella or Peanut Butter.

[@Coen80]

Put a clutchstop as well, when on the drags. So you don't lose time kicking empty space.

[@tylerreed7385]

Soo you got a mansbrake (manual transbrake ) 😂

[@matriix18]

Just gotta drop the oil pan and look at the bearings on crank. hopefully good still

[@busarob1969]

You have a head for radio and a voice for print!

[@kurlyfry7916]

8:50 TRAVELED QUETLEBOT

[@MJTbreww]

Loving this build! Where’s that Pennzoil shirt from!?

[@wowdogeful]

15:46 ayoo mfer got the short throw dipstick installed🤨🤨🤨

[@roboman2444]

Are those supposed to be "block off plates" or "block off plugs"? Seems like being bolted from only one side may make them easy to leak.

[@_Gingium_]

Yup, but I can’t make freeze plugs with my cnc table lol. Either way not too worried with rtv and a thick plate

[@gingerwardwarf4022]

@Gingium your rear suspension set up would be great to be able to purchase. building a 240 now and plan to try and replicate it.

[@lukechandlershort]

The old trans for sale. I'm 30 mins from Athens and interested lol

[@patrickmadden6340]

Fuck yeah anything for the Vo!

[@S.R.Productions]

Why not add a sequential shifter to it? You still get a manual trans and quicker shifts. You also don't got to worry about missing a gear either.

[@danielcmorris]

Expensive

[@_Gingium_]

Yeah those shifters are pricey, plus ruin streetablility a bit

[@TheOhsemix]

this thing has so much potential if it got a built th400 with a billet converter.

[@RuzlB]

I'd love to see what you could make and sell for your Fits :)

[@TheBCninja]

Is it possible that the solonoid is wired backwards? Like its being turned off when you hit the switch and thats why you adjusting it is altering clutch feel?

[@jagharingenyoutube]

Might be plummed backwards

[@_Gingium_]

I have to take it out to do some testing, but I find it more likely that it’s backwards or something

[@s7e7ch]

Has the coil by the master cylinder always been broken?

[@_Gingium_]

Coil?

[@alexanderrastander9289]

is it possible to use the OD button from the volvo m46 shiftknob as the launch control button?

[@thomassvedin8701]

Nice ringtone man. I have been using the PC Speaker version monkey island theme song for the last 10 years.

[@BigGums17]

Can you film the steering wheel adjustment next video? I put a new power steering rack in my 240 and also must have got it a tooth out. I'm not sure if to rotate the wheel slightly once pulling the u joint or change the rack position. I've heard it's possible to damage the clock spring but luckily I haven't, I've found sometimes the blinker self cancel earlier than it used to. This makes me think it's the wheel and steering shaft that's out? Any advice would be appreciated 👍

[@SubiCarLous]

How did you this timelapse move thing @ 2:00? It's pretty cool!

[@Tyrvis83]

just wondering... how much you have put money in that car? Awsome build!

[@eddy0803]

Metal from bearings breaking in?

[@_Gingium_]

I don't think so. I'm hoping its just leftover stuff from machining the engine

[@eel1331]

If it looks much smoother i bet it's a crazy difference in person

[@lukesf3953]

How are the sonic tools holding up?

[@codyjesen7507]

Have you ever thought about trying the s1 sequential? Might make a big difference in your times

[@kimoarmstrong3519]

Make and sell "IUM" stainless steel keychains with the plasma!

[@402SHO]

The story of my life…. Waiting on Amazon for I can finish my custom water loop PC I decided to start because my car isnt running and I was bored🤣

[@mrgmc6314]

Send the oil out to that company that tells you what exactly the metal content shaved off of ...

[@malcolmdyer6090]

Did you fill the new trans, or was it prefilled 🤔

[@_Gingium_]

I filled it

[@jzx1hunnit]

i want the cad files for the ute to s13 front setup

[@tommytech55]

Are you sure that you won't boil the brake fluid?

[@mr.trashgaming8786]

I loved the video and all but I want to see the drift truck 😞😞

[@puggawompy]

That car has been taken apart more times than a man at a alimony hearing...

[@_Gingium_]

Hey at least it’s easy lol

[@itsRealChow]

Please purchase a transmission jack. Thank you :)

[@UriyZ9mb8e]

"out with the new, and in with the... *new"*

[@rauelramos2212]

I would take the some oil and give it to a lab to test and see the contents

[@kennyman338]

A transmission jack adapter would of helped remove the transmission without falling over.. 🤷‍♂️ That dual jack point is only for the side jacking points.

[@_Gingium_]

You are not wrong. But I spent all my budget on the transmission, no extra for tools 😂

[@zerodqkov341]

Bro! Start selling things made from plasma cutter !!! Def a W !

[@_Gingium_]

What stuff would you like to see?

[@zerodqkov341]

I mean with your Bros software , everyone can send you pics of what they need, and you can create it with the plasma and welders i think it will be very profitable for you ! And the idea of uploading the stuff you design and do is really good too !

[@zerodqkov341]

@@_Gingium_ as for seeing , me personally i like everything you make because you make it your way :) so i would be happy to see the progress continuing ;)

[@mrgmc6314]

Can openers , key chains anything they currently make just put your own touch on it like 717 supply dose you should definitely look into it because that's a huge fundraiser...

[@travisschulz6342]

What app or whatever do you use to take the pics and transfer to cad ?

[@Gale_Force_Raceway]

That's a WHOLE LOT of something in that filter.....

[@_Gingium_]

Yup 😬

[@Sandman64Sweden]

Hallo ! why are you hunting for a faster volvo when you insist on keeping the roof rack which really slows you down / please from Sweden

[@ariunzulariuka1342]

I like you Honda jazz video please 😊❤❤❤

[@danygarage8805]

Awesome👌🏻

[@bwhaley419]

Spicy!!!

[@_Gingium_]

Very

[@Avetho]

Is your ringtone Dovahkiin?

[@_Gingium_]

Yes

[@Avetho]

@@_Gingium_ That's awesome.

[@jonathangreen5456]

Wish you would post most videos of like bloopers instead of one video a week

[@jonathangreen5456]

Hi there

[@jonathangreen5456]

I know it takes a lot to do the videos but was thinking you might be able do something like TJ Hunt with his main channel and the clips videos

[@porpusefuldolphin1592]

Easyyyy *drop’s transmission*

[@landon390]

🔥🔥

[@TheGoodMedicine]

Is the hard line is same as an4 id??

[@_Gingium_]

No it isn’t :/

[@joshuapereira3787]

GOOD MORNING BEAST GINGUM MOLLY KZbin CANADA ONTARIO VIDEO 🇨🇦🇨🇦🍀🍀🐈🐈

[@_Gingium_]

🙏🙏🙏

[@parkerbanken1831]

I feel like when you say you’re going to the dyno your cars always say other wise

[@_Gingium_]

No 🥲

[@Skiridr22]

Dose that tranny have a DCT system

[@thewraith6360]

I think you need to drive a high power auto car on the street before you say its fun or not lol, believe me 600+ in an auto is damn fun especially when you throw high gear and fry the tires which you wont do with a manual.

[@_Gingium_]

I mean you’re right, high HP auto cars are still fun, but not AS fun, and a different type of fun at that.

[@zerodqkov341]

How much was mollys engine

[@_Gingium_]

$3k, less than half 😂

[@zerodqkov341]

@@_Gingium_ 🤣🤫

[@zerodqkov341]

Broo whaaat ... filter ???? Whyyy .... Noooo ... Hope she's alright 😔

[@_Gingium_]

I know 🥲

[@trd8749]

Dude you shouldn't use gloves near an angle grinder, bare hands is safer. Hand can get nicked, but a glove will rip your fingers off.

[@DrFruitbag]

real

[@UriyZ9mb8e]

why are there so many comments from days ago when the video only went public an hour ago 🤔

[@SebCroteau]

patreon subscriber see vids earlier

[@UriyZ9mb8e]

@@SebCroteau yeaa i saw at the end of the video he said that patrons get early access

[@_Gingium_]

Yup Patreon gets early access!

[@torqueandbeanssauce]

You go manual cause a real man drives a manual but then makes excuses of why its not as fast as a lower hp auto car lol. That car should be deep 9s with an auto. Go pick up a $400 4l80e do shift kit and i promise you itll be just as fun. You would def spend WAY less $ putting auto. But hey when you have 7k to throw at just the trans why not i guess

[@lupulflamand5673]

Why not an auto? Because what is the point of building a race car if it's not fun to drive.

[@_Gingium_]

Exactly!

[@gsp911]

You can gain a lot of time with this by actually being able to use 3rd gear. 😁

[@bobhilly546312156332]

Why not auto because shift gears fast is cool, ya auto is technically faster, but let’s be honest the Volvo isn’t a 7 second car at the moment, hell there are plenty of 7 second stick shift cars anyways

[@_Gingium_]

True and true!

[@torqueandbeanssauce]

I guess when you got $ like this you can spend over $10k prob just to make your 700hp stick car get onto the 10s 😂 when a 400-500 auto car can go 10s. Sometimes its not about throwing $ at it is optimizing what you havecant wait to finish my budget 240 wagon turbi ls setup to show what you can do with what you have and not break the bank to run 10s. Nothing exotic, pump gas daily all accessories.

[@torqueandbeanssauce]

Another reason do you domt spend a ton of money on an engine cause every engien can blow up just as easily. Id rather replace a $250 engine than a $3k+ engine lol

[@Low760]

And you can't get an LS for $250 anymore in most places, so building to be durable is better.

[@Yummisssbumhole]

@_gingium_ Why did you stop posting Forza videos? I remember them from a long time ago and Fred too. I was 13 years old when I first found you on some old accounts. I’m now 20 I turn 21 this month I’ve been here for almost everything

[@just_voices91]

😂😂😂😂 it's that dudeinblue

[@just_voices91]

@USER-NAME_Gingium you are aware he sees these right? Get outta here lane ass