I BOUGHT ANOTHER DUMB TRACTOR ATTACHMENT FROM AMAZON!

Рет қаралды 7,552

Күн бұрын

I BOUGHT THE CHEAPEST PAIR OF PALLET FORKS FROM AMAZON!
▶️ Watch I bought the dumbest tractor attachment from Amazon here: • I bought the DUMBEST T...

Пікірлер: 37

@hhamilton1970 7 ай бұрын

▶️ Watch I bought the dumbest tractor attachment from Amazon here: kzbin.info/www/bejne/iGG2Y4eipbBsp9k

@kdean3059 7 ай бұрын

Those chain slots are for putting a chain (and binder) around the bucket to strengthen and keep the forks from pulling off.

@hhamilton1970 7 ай бұрын

👍

@BrokenRanch918 7 ай бұрын

Looks like you have a good little attachment for the mini TYM Great video. God Bless 🙌

@hhamilton1970 7 ай бұрын

It's gonna be ok I think 👍

@stevek4546 Ай бұрын

I have some similar forks for my sub compact. One thing I did was cut off a 1" metal pipe at around 6 to 9 inches to use as a cheater bar for leverage to tighten the clamps. You can cut multiple pieces at varying lengths to fit in various spaces.

@billbray5995 7 ай бұрын

Good honest review and definitly will do the job. Did I miss a video on how you store all your attachments for the bigger tractor. I need desperately to do something like you have. Please provide a link if I missed the videos. God Bless

@hhamilton1970 7 ай бұрын

I have made one of those in the past.... time for an update

@daleotto5748 5 ай бұрын

Install the cross member strut on the top of the clamps or inside bucket brackets. How wide can you make them because some pallets are wider and narrow

@kdean3059 7 ай бұрын

Hank you are right about usefulness of forks. I built my own set using four forks with the outside ones wider so I can still pick up a standard pallet with the inside forks. I use these ten times more than the bucket. Thanks for the videos.

@hhamilton1970 7 ай бұрын

Right on!

@jackiemontgomery113 7 ай бұрын

Add a 2x4 block and clamp it down inside of the bucket will help protect your bucket from bending

@SteveNicoson-u1i 7 ай бұрын

Thanks for the video. Not too bad for the money you paid. Would be ok for moving pallets around or such. Take care. The Iowa farm boy.

@hhamilton1970 7 ай бұрын

Thanks for watching!

@stevemartinez6757 7 ай бұрын

I have had a similar set of clamp-on pallet forks for my sub-compact tractor for several years. They work just fine for what I use them for (moving stuff on pallets, holding logs up to cut into firewood, etc.). They certainly aren't as good as a regular set of forks that attach directly to the loader, but again, for what I do they work just fine.

@hhamilton1970 7 ай бұрын

👍 right on

@chickenhawkfarmstead8478 Ай бұрын

My rk25 thst is a tym tractor bucket from then is 😊 from my bucket forks.

@vancesisk2520 5 ай бұрын

I know its late comment but turn your pallet 90 degrees so your forks go under the cutouts in the 2x4s

@douglasjackson1998 7 ай бұрын

Do you suppose that cross bar is meant to cross between the extensions that rise up from the frame, rather than on the forks themselves? You'd then get your full 30 inches of fork available for your load.

@МаратСосиев 7 ай бұрын

🙂👍Маратик. да. 🛠️

@markmccoy1304 7 ай бұрын

Yeah I was wondering if those pallet Forks could pick up my Mother in Law? Thank Ye!

@BigTader 7 ай бұрын

Hank you might want to load the rear tires on the little tractor with them forks. 🤔

@hhamilton1970 7 ай бұрын

They are loaded

@larrymoons2258 7 ай бұрын

Hank!! You keep buying stuff means that you and Wiley are going to have to build another pole barn!! Just saying!!

@hhamilton1970 7 ай бұрын

😁

@wadeprunty 7 ай бұрын

You should cut the connection tubing off of the stabilizing bar and weld each end of the bar to the farthest point back you can go on each fork, so it’s not in the way of the pallets, but still works to stabilize them. I mean, it would give you an excuse to use a plasma cutter and welder. Wait, tell me you have a plasma cutter! You do have a plasma cutter, right???

@hhamilton1970 7 ай бұрын

Indeed I do