I Built a 7cc 2 Cylinder Nitro Engine! And It RIPS!

  Рет қаралды 21,226

AJ Restorations

AJ Restorations

6 ай бұрын

Hit the Join button for Channel perks like early video access, shoutouts, and priority comment replies.
/ @ajrestoration The guys at stirlingkit.com sent me this awesome little engine to assemble and test, and let me tell you it was a lot of fun, it was like Lego but for adults (not that I am one haha still a youngster by heart). I absolutely loved building and having some fun with it.
►Get the engine here
- Discount code: AJRESTORATIONS
- ST-NF2 SEMTO ENGINE► bit.ly/3FPyFLi
- Engine model kit in Stirlingkit ► bit.ly/3StzIYU
#Stirlingkit

Пікірлер: 45
@happys104092243
@happys104092243 6 ай бұрын
You should be using oil as you build the engine.
@allenroffey8514
@allenroffey8514 6 ай бұрын
Built! You didn't BUILD it! You assembled it from a kit!
@AJRestoration
@AJRestoration 6 ай бұрын
Same same haha
@SajtosPogacsa-es3jv
@SajtosPogacsa-es3jv 6 ай бұрын
Car guys call it engine build... -_-
@LFKGooner
@LFKGooner 6 ай бұрын
Assembling this required unparalleled intricacy. The satisfaction whenever the curved pins would snap in place.
@AJRestoration
@AJRestoration 6 ай бұрын
Since it was the first one I did, it did take some extra focus and patience.
@stephenpaul9165
@stephenpaul9165 6 ай бұрын
Very meticulous assembly AJ. I’m going to look it up to learn more about it. Good job!
@AJRestoration
@AJRestoration 6 ай бұрын
Awesome! Thank you!
@robertmailhos8159
@robertmailhos8159 6 ай бұрын
That would make a great engine for a remote controlled boat 😊
@AJRestoration
@AJRestoration 6 ай бұрын
That would be cool!
@steveferguson1232
@steveferguson1232 6 ай бұрын
This was pretty cool to see. Such patience
@AJRestoration
@AJRestoration 6 ай бұрын
I am glad you enjoyed it!
@copperneck1
@copperneck1 6 ай бұрын
That has got to put out some serious mini-horsepower :)
@AJRestoration
@AJRestoration 6 ай бұрын
I wonder how much hp it is actually
@slimwantedman6694
@slimwantedman6694 6 ай бұрын
Good morning from Southeast South Dakota
@AJRestoration
@AJRestoration 6 ай бұрын
Morning buddy!!
@juliesoane7399
@juliesoane7399 6 ай бұрын
Loved this build video but much prefer to see you, and not someone else, make something (that would have been scrapped) work again 😊
@AJRestoration
@AJRestoration 6 ай бұрын
Thanks, will do!
@MASI_forging
@MASI_forging 6 ай бұрын
Your work is always impress ☺☺
@AJRestoration
@AJRestoration 6 ай бұрын
Thank you so much 😀
@SHOINOFF
@SHOINOFF 6 ай бұрын
I would install that in an rc car or boat.
@pook6212
@pook6212 2 ай бұрын
No assembly lube?
@xchaix
@xchaix 6 ай бұрын
this is hard bro
@RachaelSA
@RachaelSA 6 ай бұрын
Thats so cool, my kid wants one but they like R10 000 or something.
@AJRestoration
@AJRestoration 6 ай бұрын
They are quite expensive yes.
@attilatamas4897
@attilatamas4897 6 ай бұрын
Super little engine, profi jo! Sorry, but hav much money? I from Hungary = half new auto. Tuti
@martyapo
@martyapo 3 күн бұрын
There was no need to remove the gasket from the glow plug and install it the way you did. The plug gasket is beveled on one side and flat on the other, so you actually put it on upside down. Your over use of the tweezers is especially annoying. The kit should have included extended exhaust pipes to keep the oil from running directly onto the electric motor.
@jankotze1959
@jankotze1959 6 ай бұрын
Fantasies AJ, kos seker n plaas se prys
@AJRestoration
@AJRestoration 6 ай бұрын
Baie dankie, hulle is noggals duur ja, dis so R7400 sonder shipping. Ek was lucky die een was 'n sponsor video.
@yanicks9040
@yanicks9040 6 ай бұрын
Having assembled the same thing as well, how much swearing did you have to edit out when putting that camshaft in with the oil seals/bearing? xD
@AJRestoration
@AJRestoration 6 ай бұрын
Oh, it was tight, I was sure I was doing something wrong haha. I ended up wit a piece of wood and a decent sized hammer...
@T_B
@T_B 6 ай бұрын
Why wasn't the back belt turning?
@ComputerTechNL
@ComputerTechNL 6 ай бұрын
Starter xD
@AJRestoration
@AJRestoration 6 ай бұрын
Correct, its the starter, the belt is on a one way bearing.
@thesquirrelchroniclesakare7808
@thesquirrelchroniclesakare7808 6 ай бұрын
I hear the wife doing clothes in the garage ! Nice job bud
@AJRestoration
@AJRestoration 6 ай бұрын
Hahaha thank you.
@alessandropezzella4121
@alessandropezzella4121 6 ай бұрын
@AJRestoration
@AJRestoration 6 ай бұрын
@DeanG55
@DeanG55 6 ай бұрын
These are on sale on eBay for guess how much?? $285!!
@AJRestoration
@AJRestoration 6 ай бұрын
its $199.99 from the official website ($289 with the starter kit)
@hgghgguk
@hgghgguk 6 ай бұрын
an its 200 on there website lol ?
@brandonn2538
@brandonn2538 6 ай бұрын
What happened to the reaction videos? I liked them!
@AJRestoration
@AJRestoration 6 ай бұрын
KZbin did not like them haha, I got copyright strikes on both of the videos I did. So... haha Sorry I am not going to risk losing the channel.
@brandonn2538
@brandonn2538 6 ай бұрын
@AJRestoration completely understand man, hopefully you can find a way around it. Either way still love your restoration videos!
I Assembled a Tiny 7cc Hit And Miss Engine, and its awesome!
25:06
AJ Restorations
Рет қаралды 266 М.
Having fun with a tiny 2.7cc vintage style four stroke engine.
23:17
AJ Restorations
Рет қаралды 199 М.
Do you have a friend like this? 🤣#shorts
00:12
dednahype
Рет қаралды 43 МЛН
КАХА и Джин 2
00:36
К-Media
Рет қаралды 4 МЛН
FAZENDO UMA PREGUIÇA suporte para torno! ☺️😊👍👏
6:18
Casal Mikurti ( De tudo um pouco )
Рет қаралды 19
Assembling & Running a TWIN Cylinder 4 STROKE RC Crawler!
16:19
JohnnyQ90
Рет қаралды 1,9 МЛН
This Miniature V-Twin Motorcycle Engine is a absolute beast!
15:59
AJ Restorations
Рет қаралды 9 М.
Starting up my tiny 7cc Hit and Miss engine.
3:08
The Engine Gent
Рет қаралды 28 М.
How To Rebuild/Clean/Take Apart A TRX 2.5/3.3 Carburetor
9:54
darkeclipticheart
Рет қаралды 148 М.
HOW IS THIS POSSIBLE! NEW TOYAN OTTO 2 CYLINDER ENGINE - ONLY $149!
6:39
RC Tanks & Trucks 24/7
Рет қаралды 46 М.
Miniature Turbofan Engine Assembly & RUN!
8:38
inventor KR
Рет қаралды 2,1 МЛН
Do you have a friend like this? 🤣#shorts
00:12
dednahype
Рет қаралды 43 МЛН