Nothing, NOTHING is better than a well planned customized toolbox. LOVE it!
@BorisSpark Жыл бұрын
Prossibly a nice addition to the top of the tool box would be a multimeter or a multimeter current clamp, I got a very good and compact UT210E myself and been using it for years now, no complaints and it has worked reliably for myself. An amazing bit of kit you got there good sir.
@DonLucailprimo2 жыл бұрын
Very cool. Could you share some plans for the 3d printed Inlays?
@joachimschmidt7662 Жыл бұрын
I love the way you have attached things (the square) to the SYS-TOTE 🙂
@Everythings_Adjustable2 жыл бұрын
That looks Great Max, I can see a lot of thought went in to this build 🛠👍😊
@hendrixx27182 жыл бұрын
I would find room for a 12v Milwaukee bandsaw or jigsaw, a caulking gun, pry bar, level you could hang those from the table on the side. A plumb bob, 4'" vise, some sandpaper electrical duct and painters tape, super glue with accelerator, heat shrink, headlamp, small coil of dyneema line and you should be able to handle most things that can be finished or repaired in a day.
@johnshaw18835 ай бұрын
Wow, I couldn't believe what I was seeing. I have done a similar thing to my festool boxes. I also split a 3 drawer systainer into a 2 drawer systainer. I remember, I had to make 6 metal wedges and push each wedge into the 6 locations in the drawer frame, then give it a good pull to separate the drawer frames. I thought I was the only person who knew how to split the systainer drawers. In my festool systainer, I have also put small tables on the sides. They are very useful for putting tools on so you don't have to bend all the time. My side table surfaces dismantle and go inside the tool box though to allow for transportation. I can try to get a video on KZbin sometime if you are interested to see it. Keep up the good work!
@MaxMakerChannel5 ай бұрын
I would love to see that. Maybe you are my lost twin!
@johnshaw18835 ай бұрын
Ok, I will try and arrange a video soon
@MaxMakerChannel5 ай бұрын
@johnshaw1883 nice!
@johnshaw18835 ай бұрын
Hello Max. I set up a KZbin channel to show you some quick movies of my Festool toolboxes. They are not as nice as yours though. This link should work... www.youtube.com/@johnshaw1883/videos
@johnshaw18835 ай бұрын
@@MaxMakerChannel Hello, I have put the video on KZbin now.
@giovannyarguello2645 Жыл бұрын
Thanks for sharing your mods, Max.
@FridayWorkshop2 жыл бұрын
Looking good. Everything in its place.
@InductedMist Жыл бұрын
Im not even a tool guy, or a sub but came to check this out from your driveway video discussing this toolbox. Fantastic organization, intensely German. Consider me a tool guy, and a sub!
@berendlucasvanderweide Жыл бұрын
well thought through box. Designing and printing these are so satisfying if it all falls in place . I recognise a lot of the tools in my box too. Weicon no 5 missing! (I was sceptical, plastic tool, can't be good, but it's the quickest and most efficient tool when stripping loads of wires).. I am not a fan of the Wera allen keys with the large bulky plastic on it. everybody seems to be using them, but I personally favour their stainless set. Also a fan of that 35Nm 12V bosch driver.
@tzed25093 ай бұрын
Very cool, lot of good ideas in there.
@BravoCoWoodForge9 ай бұрын
This is beautiful.
@pascalschur2166 Жыл бұрын
Gut gelöst.
@evotech Жыл бұрын
You should add a first aid kit to this :) never know when there's an acident!
@danrussell3439 Жыл бұрын
Great design
@chuckgrumble5440 Жыл бұрын
i suggest bolting on a churro maker on the side for fuel
@williamdoyle649 Жыл бұрын
Extraordinary tool kit!Well thought out and executed Sir!
@MaxMakerChannel Жыл бұрын
Thank you! It is indeed super helpfull.
@trevorcarlisle544711 ай бұрын
Love the collection and the tools you make
@systainer_int10 ай бұрын
Great job! That's such a great idea. Especially the cup holder! 🤩Stay hydrated guys 👌
@noblackthunder Жыл бұрын
3:08 the orange caps i know for sure are not for electrical cables. They are for phone / alarm cable that have a low voltage and carry a low current. I know this for a fact because i worked with it and i an a full licensed electrician too ... Since you said they are for " garden electric stuf and water tight" yea they are water tight but again you cant have anything bigger then a cat 5 cable as an example .. but even for that they are bad because they would cut those cabels right out .. ( since they are single core often) Just sort of feel need to warn people so they dont start using them for any 230 volt stuff ... the blue cap once i cant comment on, dont remember using them ever
@StrongmanLovesAnimals2 жыл бұрын
I learned so much, thank you for sharing great ideas!!! 😊👍
@oliverking80298 ай бұрын
Very nice!
@steveposey84462 жыл бұрын
Awsome, Thanks Max 😊
@weetecguy978 ай бұрын
Only just found your channel and I'm loving the content ! Much respect from Scotland
@MaxMakerChannel8 ай бұрын
Thanks for watching! Greatings from Germany : )
@DJMankiewicz2 жыл бұрын
Sweet kit! Did I miss it or do you perhaps need a few loose sheets of a few grits of sandpaper? Maybe add a some abrasives and light solvents.
@MaxMakerChannel2 жыл бұрын
The sandpaper is a good idea. Ill add it to the list! The Isopropyl is good for all kinds of glue and grease.
@kokonokov Жыл бұрын
Very cool
@AndyCPugh2 жыл бұрын
That's really cool. I like that.
@leanwoodworks5 ай бұрын
TITLE SHOULD BE I BOUGHT A BUNCH OF STUFF..
@creepmatze4 ай бұрын
Sehr geiles Setup.. gibt mir evtl ein paar Inspirationen :)
@worldtreedesign2 жыл бұрын
Nice work on this
@HarveyJohnWillmott5 ай бұрын
This is the most German thing I’ve ever seen 🙈🤣 And that’s a compliment. Very impressed!
@awareness9797 Жыл бұрын
Красавчик! Отлично организовано!
@samiam8722 Жыл бұрын
I wish I could purchase the table sides. Great work!
@EvilOtto580 Жыл бұрын
Great!
@snaplove79315 ай бұрын
great do more 3d Accesories for the festool .Forsintant longer items. and can you share you designs so we can print them too thanks
@SlushEye Жыл бұрын
Könntest du die Dateien von den Werkzeughalten vielleicht zur Verfügung stellen? Das wär super :)
@mikebolt9753 Жыл бұрын
hey cool video. Festool looks good quality. I like the whole 3d print design.
@samiam8722Ай бұрын
Can you please post the stls and f3d files for the organizers so others can print and modify them? I am not sure if you use thingiverse or printables.
@AndrewHelgeCox2 жыл бұрын
I got excited and checked what these Festool boxes cost to buy and now I can't stop crying 🥺.
@MaxMakerChannel2 жыл бұрын
I never considered buying them until I got two boxes for my birthday. But the quality is very convincing.
@harveysmith1002 жыл бұрын
Buy one every six months. I am a multi trade and I have to say, they are the best thing on the market. I don't regret a single one I have bought or the wheels etc.
@Tensquaremetreworkshop Жыл бұрын
There are way better boxes to buy- Toughsystem2 or Packout for example. Watch where he opens the drawers- sticky... Others have quality metal roller slides. Much stronger construction, too.
@WCarey-nz7lx Жыл бұрын
Hi Max, what about PPE, or personal protective equipment, not sure if I saw that, but if you added, I missed and apologize. If you don't please think about adding it for your safety when working and making. 🤓That's you with safety glasses on, LOL.
@MaxMakerChannel Жыл бұрын
Hey yeah we got it! Earplugs, headphones, safety glasses and gloves.
@Jenthura2 жыл бұрын
I don't use even a quarter of the tools in there, but I want this!
@huib17152 жыл бұрын
Max, can you provide more information about the quick releases, the little snap and the cupholder? where did you buy them and or with what name can they be found with google? Nice cart By the way
@MaxMakerChannel2 жыл бұрын
Hey, my amazon store is in Germany, but the cupholder is easy to find I guess. Those quick releases can be found if you type in Camera quick release or camera snap mount.
@pauli6570 Жыл бұрын
Maybe a place for the kitchen sink…seems to be the only item you forgot. Just kidding, very nice setup. Hils fra Danmark 🇩🇰
@TheHokiedude127 ай бұрын
I am surprised you did not have a voltage tester pen
@MaxMakerChannel7 ай бұрын
I added once since then!
@SCHAUDENLUCAS Жыл бұрын
Awesome. I recommend to add a Tajima Scraper. Love it and use it all the time. As many others I just found your channel through your latest and probably first viral video. Crazy how viral it went. The content is pretty cool though. Do you think the comment from stuff made here boosted the virality a lot?
@haruhisuzumiya665010 ай бұрын
Not going to lie I'm jelly
@vasya5167 Жыл бұрын
Прикольно 👍🏻
@TTT-no6ci10 ай бұрын
Mega Turm!! Welche Lampe ist das genau? Und welcher Halter?
@MaxMakerChannel10 ай бұрын
Die Lampe ist eine 0815 Videolampe. Der Halter kommt aus dem Fotobereich. Das sind so Schnellverschlüsse.
@SystainerStore2 жыл бұрын
Very nice set up. I'm inspired to finally update my home based tool cart. Now to find a weekend to implement!
@slotho122 Жыл бұрын
I want a cart full of tools but I have to buy all those tools first, before I get the cart.
@steffenoehler3582 жыл бұрын
Sehr nice. Kannst du mir vielleicht genauer verraten wie du den Sortainer abgeändert hast?
@MaxMakerChannel2 жыл бұрын
Ja das war echt schwierig. Man kann die einzelnen Lagen von Innen aus einander hebeln. Da sind Wiederhaken die man lösen muss. 3 Stück auf jeder Seite. Wenn man die gelöst bekommt gehen die auseinander und man kann sie beliebig neu zusammen stecken.
@MrShinta7862 жыл бұрын
K-nipex, you're GERMAN :-) Love the cart though, I love systainers
@liedjesvanjelle Жыл бұрын
Hi awesome video, what is the height of the drawers?
@MaxMakerChannel Жыл бұрын
I don’t know exactly. About 6-7cm.
@liedjesvanjelle Жыл бұрын
@@MaxMakerChannel thanks! :)
@MrSloika2 жыл бұрын
This is a great idea, unfortunately this Festool stuff is extremely expensive here in US Murica. Each one of those sections is like $60.
@MaxMakerChannel2 жыл бұрын
Yep. Same here, but it’s justifiable for me since it saves so much time that it makes up for the price in no time.
@patregan2 жыл бұрын
How many feet is that 3 meter tape measure?!
@MaxMakerChannel2 жыл бұрын
I don’t know. I had to measure that.
@bobdickweed2 жыл бұрын
12 Banana's or 13 , depends on if you are left or right handed
@trevordyson88822 жыл бұрын
Three Bushells
@TAGZGermany2 жыл бұрын
Woher hast du die Einsätze/ Halterung her für dein Werkzeug, was du in der kiste verklebt hast? Aus einem 3D Drucker? Würd mich über ne kurze Rückmeldung freuen!
@MaxMakerChannel2 жыл бұрын
Ja alles gedruckt!
@mattvonmatt332 ай бұрын
Zipties ;)
@johnp18392 жыл бұрын
Awesome setup I have a few questions I am hoping you can answer! What festool systainer are you using on top with the open tool storage? What are the tool dividers in the video for your pliers and screwdrivers? What is the attachment for your Bosch drill driver that allows it to hang off the systainer? Thanks great ideas 👍 💡.
@carlhowell1702 жыл бұрын
I think he mentioned the inserts in the tool caddy were 3d printed. The open top tool box with the handle is listed as a "tool box" on festools website.
@MaxMakerChannel2 жыл бұрын
The metal hook comes with the drill.
@robertbrodzinski29482 жыл бұрын
Hey @Max Maker, kannst Du bitte Link geben für die LED Lampe und den Winkel Halter ? Danke ;) gerne Amazon GER
@paulwong7870 Жыл бұрын
Did you 3D print the organizer inserts yourself? I'm looking to purchase or have these exact parts made.
@MaxMakerChannel Жыл бұрын
Yes I did!
@chickenjoesevy11 ай бұрын
This is the most German thing I've ever seen
@MaxMakerChannel11 ай бұрын
You haven´t seen the trash train yet!
@el_micha4 ай бұрын
@@MaxMakerChannel Do u show that? Or you're going to in the future?
@MaxMakerChannel4 ай бұрын
@@el_micha Its on my channel! Got 4 million views : )
@el_micha3 ай бұрын
@@MaxMakerChannel I watched it now. Amazing!!!
@elidraughn28082 жыл бұрын
Very inspiring! Would you mind sharing about that square light you mentioned? Forgive me if this is address elsewhere!
@MaxMakerChannel2 жыл бұрын
Hey, yeah it is a camera light for filming. There are a lot of chinese models out there. I connected it with a camera accessory gimble. So 100% camera equipment.
@derrickmuck535 Жыл бұрын
How is it rolling across rocks or gravel?
@MaxMakerChannel Жыл бұрын
Bad
@derrickmuck535 Жыл бұрын
@@MaxMakerChannel thanks for the feedback. I was afraid of that. Everyone is using the pack out and I wanted to be different. I work turn arounds at power plants and refineries and need something rugged.
@MaxMakerChannel Жыл бұрын
If I needed bigger wheels I would just strap the whole thing to a cart for crates. Like the one movers use. With 300mm wheels.
@el_micha4 ай бұрын
"Blue Wheels" are not too bad for this, as being used for flight cases to transport event equipment. They're a reasonable compromise between tiny wheels and those balloony big tires as in a wheel barrow. Diameter is 100mm /ca. 4 in. and they are firm enough to not wobble too much and soft enough to give in a bit. Either way the problem one might run into is tipping hazard. The higher off the ground the cart goes the more likely it will tip bcs of the small footprint. Loading it top heavy makes it worse. Plz rmember a Festool Systainer box is only 40 x 30 cm in footprint (15.75 x 12 in.)
@ToTheTMAX2 жыл бұрын
Great build, Where did you get those inserts for tool storage in top toolbox?
@MaxMakerChannel2 жыл бұрын
Hey, I 3D printed them!
@jw200 Жыл бұрын
can you share the 3d files?
@Dubjaxfilms2 ай бұрын
"Perect" ?
@scimus33022 жыл бұрын
Echt toll gemacht. Daumen hoch. Wie hast du das Innenleben von dem obersten Werkzeugkoffer gemacht?
@MaxMakerChannel2 жыл бұрын
Danke. Alles 3D gedruckt.
@OscMor_92 жыл бұрын
Hallo Max wirklich cooler werkzeugwagen. Hast du mal überlegt wie bei Alexander Chappel 3d gedruckte Container zu machen? wenn es ok ist wollte ich auch fragen was du studiert/ als Ausbildung gemacht hast. bin fast mit der Schule fertig und suche gerade Inspiration. Hello Max really cool toolcar. Have you seen the organizer boxes of Alexander Chappel? I think they could be a useful addition to your shop. If it's ok I wanted to ask what job you studied for? I'm almost finished with school and was interested. I am still in the searching phase and looking for ideas and inspiration.
@MaxMakerChannel2 жыл бұрын
Hey, diese Container sind ganz cool, aber wir haben davon jede Menge ähnliche Sortimentkisten von Auer-Packaging.com. Die haben 70 cent bis 4€ gekostet und waren am Ende deutlich günstiger und wir mussten nicht tagelang den 3D Drucker blockieren. Ich habe Produktentwicklungsingenieur in England studiert. Das war genau das richtige für mich, aber ich glaube Programieren hätte mir auch gut gefallen. Hauptsache du machst etwas was du interessant findest. Gerade Handwerker sind gefragt wie nie. Ob Klinatechniker oder Dachdecker. Viel Erfolg!
@OscMor_92 жыл бұрын
@@MaxMakerChannel Danke
@DucPhan202 жыл бұрын
can you share the 3d files? thanks!
@txm1002 жыл бұрын
Very cool! Do you have a linke to these small camera quick change adapters? Thanks!
@MaxMakerChannel2 жыл бұрын
You can find it if you google Aluminium Camera Mini Quick Release.
@bartsons2 жыл бұрын
@@MaxMakerChannel Hi Max, amazing setup! I cant seem to find it. Can you please send us a link? Thanks in advance.
@MaxMakerChannel2 жыл бұрын
Only in the German Amazon store. The brand name is Neweer.
@NicksStuff10 ай бұрын
This is sooooo german!
@Tensquaremetreworkshop Жыл бұрын
Ready for ANY job? How about welding- watch that plastic melt...