I Built a Parts Washer Machine

[@MakeitExtreme]

Hello Everyone! This time we changed the style of the video and we want your feedback! After all, the important thing for us is for you to enjoy our videos! Please watch the video and leave your comment. Thank you! What changed? 1. Lower volume background music 2. No transitions 3. Real time viewing (except some scenes on a lathe)

[@FamTech.]

Lets see!

[@iouraxos]

I liked the previous style, but I also like this style. You guys are awesome!

[@RoQu3]

This style better

[@thomasvnl]

Really enjoyed it this way

[@mariosmichael5116]

I liked the previous style it was more stylish with the transitions and louder background music but I also don't mind this style. This style feels more realistic and raw. I would say that the lathe volume was a bit too loud at some occasions.

[@Paulster2]

Two things you're going to have issues with: 1: It appears you're using a fuel pump as your liquid pump here. If so, part of how a fuel pump exists is by it being submerged to provide cooling. Without it, you'll burn through these pumps. 2: You put your power supply in a closed box. These require air flow in order not to overheat. I know you're trying to get these out of the way of the liquid, but still, you've got to have something there or it's going to burn up. Other than that, this is a great build.

[@thomasstasinakis8351]

Παρακολουθώ το κανάλι σποραδικά εδω και 4-5 χρόνια, μόλις τώρα κατάλαβα οτι είστε Έλληνας. Εξαιρετικό βίντεο,η μουσική έδεσε πραγματικά πολυ ωραία . Συνεχίστε την καλη δουλεία , χίλια μπράβο.

[@CarsAndTech]

Oxi kai ellinas! Kipreos original!

[@fabtwister]

hi @MakeitExtreme , for my part you have clearly increased the quality of your videos, this format is really great, the sound is perfect, you have done a good job I love it a lot. As usual, the creation is crazy and this format makes crafting seem more accessible for novices so well done, keep it up

[@mattatrcc]

aren't pumps like that typically cooled by the liquid there submerged in? by moving it outside the tank wont it burn out easier?

[@tckroder5304]

The are cooled bye the liquid That flow throw the pump

[@DanKoning777]

Personally, I prefer hearing, seeing, and listening to the tools/machinery doing their thing-I can listen to a radio whenever I want to. Your ideas/designs and final builds are great-they're also a means to learn. What I am tired of are all the negative Nancy's in the comments-just ignore em' keep building. 👍 God bless.

[@chiphill4856]

Same here. The sounds of machinery are great. Computers generated club music? Not so much.

[@patrickmontgomery6353]

I much prefer this style. Far more focus on actual building and fabrication, and music isn't distracting, but background fill. Building these tools and machinery is what got me interested in your channel to begin with. Well done.

[@chiphill4856]

I disagree, the music is awful. The rest is good.

[@be007]

I wish KZbin had an option to turn off background music. I find music very disturbing with these types of videos and it adds nothing at all, except irritation. it's a shame about the video, because the content is very good. cheers ben.

[@chiphill4856]

Exactly. It sounds like computer generated club music. Dreadful.

[@aarondcmedia9585]

It's a plague on YT these days. Even worse when people have the music the same volume as their voice over. WTF? People seem to be embarrassed about their content or something and add music thinking it adds value or makes it interesting when all it really does is distract or make voice over illegible.

[@aarondcmedia9585]

Having said that, I don't hear an issue with the music in this video - the machining sounds take precedence, and the music is not distracting at least to my ears.

[@Ressonance2011]

May be useful a cleaning brush in the end of the relief hose? Like in the classic cleaning tables

[@CoolIdeasDIY-qv1nz]

Hi, great work as always👍

[@CJWarlock]

I like the splash shield. :) Adds to the comfort of use. :)

[@martinleska4292]

I hope it is not a gasoline fuel pump. This pump has not hermetic motor, but everything - brushes, commutator, winding and bearings are submerged in gasoline which is not conductive. If you fill it by water, electrolysis from DC current eat its internals very quickly.

[@adamspivey]

Great job and wonderful build, sir

[@labiadh_chokri]

Nice project, u must fully protect the belt, and the logo make it extrem prevent u from good vision, I think the pump must be submerged for best colling as used in fuel tank.

[@welderse14]

Grab a .99 cent sink screen for the drain. It will catch larger debris, keeping your fluid cleaner.... and may be handy if you drop a small part inadvertently.. Great build

[@milybanily]

Nice machine ! Washer machine 2.0 I guess will be adding a little more room from brush to shield.

[@innovationtime20]

Nice job bro Keep going 👏👏

[@zygmuntthecacaokakistocrat6589]

0:20 I've got a feeling those parts in the scrap parts bin weren't as randomly placed as we are being led to believe . . .

[@P10101G]

I made a similar washer using a truck fuel pump a few years ago. The mild washing solution and debris quickly destroyed the pump. I even had the pump suspended and surrounded for protection. I hope your lasts longer! Take care.

[@namngothe2060]

hello .this video is really good, the sound is perfect, you did very well, you did it perfectly, your video is very interesting. You did a great job. I like it very much. Please continue to improve

[@ThePapadooks]

that great big brush cleaned inside the barrel of that carbie huh ?

[@randytravis3998]

i was thinking the same ..

[@En3rGyFaNforEv3r]

Hi, i love your videos and the quality is getting better and better! Just one idea for you, please give us in the beginning a view of what you are going to build, i always skip faster to the end to peak and look what it will be and start the video new :) stay save luv ya

[@alekosxatzopoulos6942]

Κατασκευαστικα τέλειο. Αμφίβολης χρηστικότητα.

[@arva1kes]

I would think just get the old dishwasher and have some kind of typical polishing station for especially dirty parts.

[@jaymzx0]

A dishwasher with a metal tub would be a good base for a Make It Extreme Bead Blasting Box.

[@colinsmith6340]

Awesome work.. apart from the pump you used. They are fuel only, as the liquid runs through the pump electrical and the rotor. It will probably die very quickly with water based cleaners. You will also need a much better filter for those kinds of pumps too, as they use ceramic plates to pump the liquid with very very close tolerances to get the pressure for an EFI system, and they do not like grit. I would advise getting a low tolerance centrifugal pump, it wont care about the solution you use, and wont care about dirty fluid. As well your spray nozzle might get blocked without a semi decent filter.

[@juangarciamunoz]

Muy buen video!! La musica y los planos 👍👍 Muy util maquina!! Yo retrasaria el equipo de rodillo y motor,para tener mas espacio y usarla con piezas mas grandes,y con el protector plástico,lo mismo;para dar mas espacio de limpieza Y,pondria una brocha de limpieza en la manguera,para que sea mas facil limpiar la suciedad de dificil acceso

[@lorik199]

What type of cleaning solution do you mix with water?

[@vinceianni4026]

Hello mister beautiful machine beautifully made well done

[@theprisonernumbersix996]

Very good job , bravo !

[@stoneshrink]

what brand/type is that marking pen you used at 0:47 ?

[@daverigby2577]

Super build!

[@Reman1975]

On channels like this, where they often go for pretty ambitious projects, I always wonder what projects we DON'T end up seeing? I'm thinking about stuff where they get half way through and realise there's a major design flaw so have to start from scratch, or get it finished and find that it doesn't really work properly. I'm guessing there must be at least a couple where the raw footage is just sitting there on the (Probably green) "Make it Extream" video editing computer. It could be interesting to prepare a "They can't all work" type video of them, just as something to release if the main project overruns seriously and there's nothing else ready to upload at the time.

[@G.M.783]

Εμενα προσωπικά μου αρεσαν πάντα τα βίντεο σας. Μια ιδεα ισως ειναι κάποια στιγμη να φτιάξετε και μια καπμπινα βαφής. Μπραβο στην για την δουλειά που κάνετε συνεχίστε με αυτο τον τρόπο

[@adriankohli4870]

Top Job, Sir 👌

[@criggie]

Extend the sink-to-sump pipe so the end is submerged. That will give less splashing and suds.

[@Kexx99]

Ну надо же, материалы такие же как и везде в мире. Я-то думал)))

[@ПавелБерезорудский]

Все круто,когда машину доделаете?

[@c.harris7823]

Very cool! 👍🏼

[@manishsingh8837]

Can you make a Multifunctoinal Full Motion Chair Clamping Keyboard Support Laptop Holder Mouse Pad for Compfortable Office and Game

[@marymigliore3396]

SO COOL !!!!

[@gregkrueger331]

You could add a couple inexpensive sonic transducers and have yourself an ultrasonic parts cleaner.

[@lucblin1435]

Great job 😉

[@temyraverdana6421]

Amazing!

[@MrJoyforjoy]

ladies and gentlemen,the Washing it Extreme MK 1

[@SPUDHOME]

You cant easily get to the hose connections for the water containment box, that is on wheels?

[@DanKoning777]

And you don't seem to be able to construct a sentence that's actually a question either.

[@SPUDHOME]

@@DanKoning777 and that solved the problem. You did great

[@chiphill4856]

I'm not a hater, but this machine looks tough to use. Visibility thru the wet plexiglass is limited. Reaching your hands up under the guard looks cumbersome. The brush is kinda big and it's hard to believe it cleaned all of the nooks and crannies of that carburetor.

[@notyouraveragegoldenpotato]

95% of the car parts I need cleaned that aren't easily taken care of with degreaser soak and a simple power washer session are the ones with all the nooks and crannies hat big straight roller brush will never reach😂 I agree with ya. I use a 2" long bristle 3"×4" sized brush and it'll get 99% of all the nooks and crannies. I hand clean every single part when I have a motor torn down/being built and I gotta be honest.. that machine just wouldn't be very useful. 1 Solution to a 99 part problem that doesn't exist

[@danlogicaluk8721]

Pull the cab off, then you can do a proper job of cleaning and painting. Love the autocar and it gynosapod bumper. Looking forward to the next one

[@danb2936]

Should have torn a kirby vacuum cleaner apart for the brush mech.... And a old Belfast sink for the water/cleaner... Lot of effort for not much difference in cleaning 😊

[@viacheslavkrasnianskyi1723]

Can smbd share playlist ?

[@johnjr3870]

Its OK, but seemed like a lot of work for as really simple as it is. That pump is designed to be run submersed for cooling.

[@ak77ru18]

Ворс у щетки надо длиннее и место для рук больше

[@gremlinsports]

The brush setup is scary. It needs something to keep your hands parts or both from getting stuck inside. A part could easily go through around and bust your hands and fingers up. Hopefully you used polycarbonate not acrylic wich shatters on impact. Cool idea though.

[@AmineLandri-wt6sz]

Can you make a tmax bike?

[@pooyl6842]

Çok işlevli değil gibi görünüyor!aralıklı ürünleri nasıl temizlediğini anlamadım? Düz bir zemin ile, bir parçanın arasına girmek nasıl mümkün olabiliyor? Dar bir fırça başlığı çok işe yarar gibi duruyor. Bunların yanısıra, bütün bu mekanizmayı hayal edebilmek en mükemmeli diyebilirim.. çalışmalarınız genel olarak çok heycan verici. Sizleri tebrik ederim 🍾

[@levinwernsdorfer6851]

Can you Build a maschine for cleaning paint guns?

[@AgentWest]

All you really need to clean those is a stream of acetone, so something as basic as a small fuel pump with a piece of fuel hose will provide just that. Take the nozzle and paint tank off the spray gun, plug up the hose into where paint tank was, turn on pump. Few minutes later your gun will be flushed out and clean. This is pretty much how professional spray gun cleaners work, only you get a fancy tub and all that. Just keep in mind that it does use up a good amount of acetone, so if you paint a bunch you should look into an acetone distiller. Just like a moonshine one, it boils off clean acetone, then condenses it back into liquid, and leaves impurities behind.

[@yutan15silvia]

Great job👍 Don't forget ground wire.

[@piotrbpm]

Myślałem że to myjka do czyszczenia silnie zabrudzonych rąk ze szczotką obrotową 😅 czasem tak zajdą ręce że człowiek trze i trze i w zakamarkach nadal brud .

[@bruceharmsii2816]

Oh yea when I see that green paint get busted out I know it’s go time baaaaaaaaby

[@ОлегГриднев]

Можно картошку почистить. Только без мыла.

[@Applesupnorth]

Callus buffer 2000 now for sale :P

[@jackcantrell791]

Overkill

[@simonburri8178]

Super gut 🔩🔧😂👍

[@TaranovskiAlex]

Why does it make such an unhealthy noise...?

[@chiphill4856]

Sounds like it will rattle itself apart in a week.

[@rupeshnathe4892]

Still its usefull for shoes only

[@lrdisco2005]

Please build a spray booth with good filtration, protect your lungs.

[@ammarouachen4850]

You are Grées..❤

[@humanidadhechocanal8816]

Creaste un sepillo limpiador bien loco

[@H4rleyBoy]

After watching every one of your videos, it's happened, you have finally made a machine that isn't even worth turning on :( :(

[@coutinho640]

Show 🎉🎉🎉.

[@PeterNetped]

[@misterdeedeedee]

personally not a fan of wearing gloves while working with a spinny grabby thing for fear of it grabby and/or spinny my finger(s)

[@khiemtongduy6318]

Hay

[@ronaldnavarra_0424]

Present!!

[@wounndedhearts8647]

❤

[@gutesherz9049]

💯👍😎💯

[@DD-DD-DD]

Far too small

[@khaledhamzeh936]

💞💞

[@gefest4021]

Привет ты с Израиля

[@gefest4021]

???

[@albertcebriariu4469]

😊

[@EsmaeiHasaninezhad-sh3zl]

❤❤❤❤🎉🎉🎉🎉🎉

[@ПавелНиконов-щ5ж]

👍👌

[@harkbelial]

Ladies nail polisher 5000

[@lucasconstantino3884]

👍🙅🚀🔥

[@Lex9296]

Doesn't seem very comfortable ...

[@no1se706]

painting stainless steel not good idea, especially from balloon.

[@svarka_bolgarka]

Здравствуйте. Ну и нах.я это?

[@theqerry1402]

Less functions

[@gtblack1988]

Какая то хрень

[@georgiosxirouchakis439]

Έπος…

[@Massimo68ac]

✌✌👍👍👍👍😎😎😎😎💚💚

[@nikibramm3274]

STOP I'M SAYING BULL SHIT..... when did the little bowl become an ultrasonic cleaner. total BS

[@Khaledhamzeh1]

،💞🇱🇧

[@AcheAniche]

Первый)

[@russellharris9579]

👍👍🇦🇺🦘🤔

[@ClaudeSac]

Over engineering does not guarantee optimal functionality. It's a nice machine but very limited in its practical use. I enjoyed and liked the video anyway.

[@curtism7203]

The shit you guys will make for a view.... lol...

[@sahlabbessi1317]

Not cool not useful

[@brianchristoffersen822]

Not your best work

[@tobyshew865]

Techno sucks, bing back metal music please.

[@oscyanogen]

No safety, no emergency kick switch or foot switch. It's not extreme at all