Рет қаралды 391,186
I modified a Super Nintendo controller to build a custom SNES Portable. Raspberry Pi Zero build. Checkout Part 2 - • I Built a Portable Sup...
.........................................................
Subscribe & check out my other tech restoration and mod videos!
Follow me on Instagram: / restoretechnique
Buy Me a Coffee 😄 : www.buymeacoff...
Filmed on: Samsung S10e
Music:
Back To The Future Jellyfish - NoMBe
Calvin Harris - josh pan
If the following Tools and Parts lists helped you, please considering leaving a comment :)
(not affiliate links)
Parts List:
Original SNES Controller
Raspberry Pi Zero
WaveShare GamePi15 hat - www.waveshare....
SanDisk Ultra 16GB MicroSD card - www.officework...
Little Bird 3.7V 600mAh Lithium-Polymer Battery - www.littlebird...
30 pin, 0.8mm pitch, Flat Flex Cable (trimmed to 20 pin) - www.aliexpress...
28AWG silicon wire - www.jaycar.com...
Full parts list in Part 2.
Software:
PinkyPi X for the GamePi15
PinkyPi prebuilt image, based off RetroPie 4.5.1
Using fbcp-ili9341 display driver (60hz!!)
Using RetroGame GPIO controller driver.
Using PiSNES as default SNES emulator
From www.crackedcon...
Tools:
Yihua 936 Soldering Iron
Yihua 2008D Hot Air Rework Station
Ozito 170W Rotary Tool - www.bunnings.c...
Drill Press (Aldi)
Phillips Head #0 Screwdriver
Custom fume extractor - • DIY Soldering Fume Ext...
Tec 305-12 hot glue gun
Kapton tape
Goot Wick desoldering braid 3.0mm & 1.5mm - www.jaycar.com...
KingBo RMA-218 Flux
UNI-T UT71D Multi-meter
Trojan Files
Dick Smith Precision Pliers
240 Grit Sandpaper
Rotary tool cutting blades (Ozito, Dremel, eBay)
Woolworths Essentials dish detergent