Thank you so much for your video. I was ready to move on from pd-7 till you showed it’s still good booster clean.
@Paajanenae5 ай бұрын
The PD7 is actually a very bad pedal and you should definitely ship it to me so I can dispose of it properly 😍 ehm 🤧
@straightface605 ай бұрын
@@Paajanenae really? It’s seems limited but cheaper to keep her
@Paajanenae5 ай бұрын
@@straightface60 Hahah seriously, I love that pedal! Gives all my tones a bit more brightness and clarity
@Paajanenae5 ай бұрын
I think I already have four 🌚
@chachpolnipasuwan34409 ай бұрын
Looking awesome Paj! \m/
@Paajanenae9 ай бұрын
Thanks! 🔥
@martinschubert70316 ай бұрын
Very cool pedalboard, indeed ... the powersupply issues, I can totally relate: My infinity stops working when I use my Line6 G30 (which I basically always do, wireless ftw) while everything is connected to a Harley Benton powersupply. I now daisychain my G30, the infinity and my compressor to a 1spot powersupply ... this works surprisingly well so far. So if you have a darkglass digital pedal (adam, infinity, photon) and are using a second high ampere pedal on the small harley benton powersupply, your infinity may shut off (dg support says that the smallest harley benton cannot provide the full 500 mA on two outputs)
@Paajanenae6 ай бұрын
Yeah always make sure that your power supply matches the pedals you're using!
@yalngucgoturen74135 ай бұрын
You are one of the best bass inspirations for me on KZbin especially tonewise. My current pedalboard consists of : Ebs Multicomp ( I use it on multicomp Mode on utility level settings with comp 2 o clock. Then instead of Pd7 I added TC electronics spark boost ( I use it on clean Mode on gain at 0 level at utility , bass and treb at same settings with you on the video sometimes i boost the trebs to flat depending on my pickup selector, then Mxr M89 with gain at 0 tone almost all the way up 5 o clock clean at flat and utility level and I still have B7K for the main course. I know you mentioned about the Microtubes Infinitys clean parallel signal option in the related video. I have 2 questions If you do not get bothered 1) For live situations do you also use the parallel output to mixer to split the signal to clean on the mixer and normal output from directly to the cabin or do you also use heads? 2) For home practice or recording ( this video is an example ) , do you also split the signal regardless of Microtubes Infinity's splitting the signal option.
@Paajanenae5 ай бұрын
I pretty much never split the signal in any way 😄 Live the FoH only gets the mix ready signal with all my processing and the same applies to most home recording. If I record something for an album I use an external pedal to split the signal before my board to get a dry DI, just in case something happens and we need to reamp or something.
@yalngucgoturen74135 ай бұрын
@@Paajanenae If you do that s the right way dude 🤟
@skeleton-key9 ай бұрын
Oh and the tuner is included in the Darkglass pedal right? Saves a spot. Great tone man
@Paajanenae9 ай бұрын
Yes! It's what makes this board possible 😎
@boomerbutler75697 ай бұрын
That was my only negative, but I guess I didn't realize all the Darkglass pedal can do. @@Paajanenae
@naobakonjengbam91016 ай бұрын
Will be more awesome if you have some space safe in front of SS compressor for a wireless pedal👍
@Paajanenae6 ай бұрын
Why leave extra space when you can just build a new board once the time comes to go wireless? 😍
@bartjans2213 ай бұрын
Awesome review, and brutal tone. Have you tried the Skarbassone yet ?
@Paajanenae3 ай бұрын
Thank you, I have not. I've been trying to stay away from trying new things for a while now 😄 Pretty happy where my tone is at currently
@bartjans2213 ай бұрын
@@Paajanenae Yeah, there are limits to one’s bank account .. :) Followed you with the board plus pedals. Sounds awesome, but as I read good reviews on the compressor of the Skarbassone, swapped my hyper luminal compressor with it. At first sight, sounds amazing, but get the impression that the tone gets a bit too overcooked. Had to lower the volume as it was just too strong. Need to finetune it a bit… :) For people who don’t want to spend a lot of money on the infinity, this Skarbassone seems a good alternative, if you don’t need a DI out ..
@Paajanenae3 ай бұрын
@@bartjans221 Yeah my impressions from watching the SkarBassOne wasn't really great for my uses but I'll need to try one out at some point to be sure! Seems like a neat one-stop-shop though :)
@nicolasm17624 ай бұрын
love the tone. Do you connect direct in FOH with this pedal board? or do you do one signal goes into an amp and the other goes into FOV? Or do you use a FRFR speaker?
@Paajanenae4 ай бұрын
I connect straight to FOH via the XLR out! Sometimes in practice sessions I've connected one of the 1/4" outputs without cabsim to an amplifier and cab, but that hasn't really worked for me.
@srayondatta43997 ай бұрын
Awesome tone my guy
@naobakonjengbam91018 ай бұрын
Awesome pedalboard man🔥 btw, what specific sound did you like from pd7 in the signal chain?
@CheapMessiah8 ай бұрын
Hey Paaj, I can see the pork and pickle with gain at minimum, what is it ading to the signal chain, is it like a second boost on top of the PD-7?
@Paajanenae8 ай бұрын
Even with gain at 0 it doesn't fully clean up! It also has a limited headroom which adds this "squish" to the tone that makes it feel like its super loud
@BunchyMutt6 ай бұрын
@paajanenae surprised the Hyper Possum didn't make the cut! Or does it get tacked on when needed?
@Paajanenae6 ай бұрын
The Hyper Pozzum is not something I use daily in my current modern metal projects, but I do grab it every time I need some extra hair to my tones!
@georgeonderko52735 ай бұрын
I’m super new to pedals but isn’t the DI for the Infiniti best at the end of the chain if you’re using that plug at your gig?
@Paajanenae5 ай бұрын
Yes, that's why it is at the end of the chain 😄 The signal with pedals always goes from right to left
@georgeonderko52735 ай бұрын
@@Paajanenae mind blown.
@erichermann5109 ай бұрын
Nice tone! did you upload the settings in darkglass suite ?
@Paajanenae9 ай бұрын
Thank you! I've got a few tones in the Suite and those are still what I'm running in the Infinity, with only minor EQ tweaks :) I plan on doing a deep dive into this board and Infinity perhaps during Christmas to fully optimize my tones for this.
@martinschubert70316 ай бұрын
I recently remembered you demonstrating how the infinity sound gets punchier with the other distortion pedals in front, so I just tried that out yesterday with my B3k in front of the infinity and BOY that was an upgrade to my sound :)
@Paajanenae6 ай бұрын
Glad you liked it! Stacking dirt can make all the difference :)
@coveryourears38519 ай бұрын
Great sounds and vid, got me kinda wanting to try a pork and pickle. What pickup position were you using on the Dingwall?
@Paajanenae9 ай бұрын
It's great when paired with a brighter distortion! It's a bit too dark alone to my taste. I was using the neck & bridge in parallel on the Dingwall ✌️
@coveryourears38519 ай бұрын
@@Paajanenae sweet! What mode do you find yourself preferring on the Infinity? Just snagged an old Darkglass b3k with boost 1 and 2 settings, its killer so far. Also curious to the one good sound you’re referring to from the Ibanez pedal?
@Paajanenae9 ай бұрын
I tend to only use the B3K mode full band on the Infinity, but with this board I think I'll need to start experimenting more with the other modes. The clean tone for example could be a bit warmer and cleaner for some sections. The only good sound in the PD7 is the clean mode with Attack off.
@babkakiepskagamestv9 ай бұрын
@@Paajanenae Im surprised that you're not using the attack on the clean mode, but your tone still sounds great! Though i am interested how the attack would sound with a dingwall, would you ever do a demo of the pd7?
@Paajanenae9 ай бұрын
@@babkakiepskagamestv Thanks! The Attack ruins the sound, it boosts treble from way too high and cuts out a lot of the good middle boost this pedal gives. Middle is where the definition in your sound comes from, without that it's just pick scraping and mud 😄
@fredericoaragao7 ай бұрын
I am getting the Infinity soon and your videos have been a good guidance for this! Thanks for the thorough reviews =) After watching this one, I was wondering if we couldn`t use the Infinity specifically as a booster in one of its 6 presets? I have a Boss overdrive ODB which I was thinking about getting rid of after getting the Infinity, but in case the Infinity can`t do its job for booster, do you think I could maybe use it only for this purpose?
@Paajanenae7 ай бұрын
I'm not entirely sure what you mean as a booster here! If you're running the Infinity to some other amps then sure you can set one preset to be a bit louder than the rest. In my use the PD7 is not a volume boost, but a pre-gain tone shaper :)
@fredericoaragao7 ай бұрын
@@Paajanenae Sorry yes, I meant literally a volume booster in case I'd like the bass to stand out a bit in some parts. So it's doable then =)
@Paajanenae7 ай бұрын
@@fredericoaragao Yeah definitely! I sometimes use a bit cleaner tone with a slight boost for one section :)
@fredericoaragao6 ай бұрын
If I could ask another question :) I have been playing with the Microtubes Infinity with a headphone and it sounds really good. However when I tried playing it connected with an amplifier, somehow I couldn't get any distorted sound, even though the volume and EQ worked normally). I don't know if I did something wrong in how I connected the cables. If I'm using the infinity as the very last pedal of my pedalboard, do I just connect one of its outputs (right or left) into the "input" from the amplifier? @@Paajanenae
@Paajanenae6 ай бұрын
@@fredericoaragao You've probably got the settings in the app mixed up! There's different options in the app on which kind of signal is fed to which output and those are really helpful :) maybe check those
@joconnorwi6 ай бұрын
THAT is my dream Dingwall...sigh....
@Paajanenae6 ай бұрын
Time to go for it B)
@KEPOАй бұрын
Sadly a Rockboard is too expensive for mexican buyers :(
@PaajanenaeАй бұрын
What do those cost over there in comparison to the wages? The smallest Rockboards in Finland are around 50-60€
@KEPOАй бұрын
@@Paajanenae Without the power supply, it would be around 100€ due taxes and importation... The one Im looking forward, that allows me to place 9 pedals without power supply, just the metal board is 200€, with power supply the cheapest grows to 800€ or more, last week I say. For I love to use the pedalboard config to see which one to get and how to place my pedal chain, because Im using parallel instead of serial chain through EH Triparallel.