I CAN'T BELIEVE HART TOOLS IS Selling These Driver Bits Sets

I CAN'T BELIEVE HART TOOLS IS Selling These Driver Bits Sets the #VeryCoolGang knows how I feel about driver bits. If you're going to use DIY or homeowner grade tools the best #ToolDeal would be to pair them with a contractor professional driver bit set for professional results where the fasteners meet the materials. Thats why in this #Review of Harts 68 piece impact driver bit set I was very critical about fit and finish on everything from the case to the fitiment of the driver bits themselves, and quite frankly i cant believe hart tools is selling these driver bit sets!
Get VCG Construction merch here : vcgconstructio...

[@martinschaffmeir7729]

My favorite are the one's that i have when i need them

[@vivmaster13]

I was thinking same thing. Looks like a good oh crap case

[@elconquistador98]

Profound

[@guyfawkesuThe1]

Worrying about the case? Use a heavy rubber band.

[@JorgePerez-yt9ou]

5:09 "im impressed " as it falls off the fastener...cut scene

[@JamesCT153]

I saw that too haha

[@miltonsuarez132]

Saw it xd

[@salmanslim]

I saw that too lol . Could’ve edited it better by removing more frames

[@uofmemphis11]

Was hoping I wasn’t the only one. Ha

[@deweybewey]

Lol had a Mini heart attack

[@Oscar-dh6kp]

I own very similar sets of Dewalt, Bosch and Milwaukee. I find myself reaching for the Milwaukee almost always.

[@Noname-lk2ol]

Its prettier thats why.

[@Cautionary_Tale_Harris]

I wonder if they all come from the same factory.

[@maninderjeetbook]

@@Cautionary_Tale_Harris just at the exit gate they change names 😃

[@scytheakse]

As a contractor, I run dewalt tools. But I buy milwaukee bits 99 times out of 100

[@BuffaloNickel9]

Y'all comparing the milwaukee to the older Dewalt or Newer Dewalt Flex Torq? The Newest Dewalt Maxx Fit I think are amazing fits and I find myself reaching for them over the Milwaukee... Anyone else like the new DeWalt Maxx Fit bits ph2, T25, T20 etc? Edit: good, good looks like others are enjoying them as well..amazing fit on the DeWalt Maxx Fit.. just make sure you get those specifically

[@TheProjectHelpDesk]

I bought one of those Hart sets when I needed a disposable kit for a deck build project. Over a year later I still have them and they are still in excellent condition. Surprised the crap out of me. Installed an entire deck at the in-laws using just a single torx bit and it still wasn't worn down after the project.

[@joshharley9234]

Same here I own semi trucks and this bit set and the actual drill bits and the larger I drill through trailer floors metal walls I cannot complain about the quality at all. Again I use these on a diesel platform.

[@sdriza]

this is what I wanted to see/hear - thanks

[@dustinkeezer8065]

i am very pleased with my Hart brand. i even bought more from the line. i am just a weekend diy'er..... TTI makes Hart, Ryobi and Milwaukee tools along with a few others

[@DadReviewThis]

I use my hart tools around the house with mill Milwaukee drillbits that I picked up on sale 😂

[@devonkremer4062]

As a mechanic I use Milwaukee, Snap On, or the cheapest most random off brand attachment/tool. Seems like the random shit I find saves my ass the most🤣

[@hendo337]

I just got this Hart set and the brushless driver/drill combo to mess with my Sloppy LS engine hot rods. Hopefully they're a decent stand in for the favorite of my contemporaries, Milwaukee. I figured if I wasn't satisfied I could just take them back and say so. The quoted 2200in/lbs of power impressed me to try them out. I'm not a pro mechanic just mess with my Silverado and GTO.

[@ferguson8143]

Haha just like a hinze 57 dogs

[@derekdugger2321]

Walmart had the 50 piece Hart drill and driver set on clearance for $4. Had to give them a try for that price.

[@Pamirace]

Man first let me say, long time tool user, first time watcher. Liked and subbed at end of your video because you didn’t ask in the beginning. That’s rare these days. Love your content and no BS reviews. Bang for buck I’m going Hart all day especially when they’re on sale. They’re 3/8 impact is a little beast with a 4ah battery, as is the 2 speed 1/2” drill driver. Since they dropped the HART line, moving away from Stanly and soon phasing out Hyper Tough, I’ve been nothing but impressed with Hart and as the frugal Jew/Mex I am, bang for buck matters. Keep up the awesome reviews

[@EricRagle]

This is what I appreciate about this channel. You show the good, bad, and ugly. Cheap or expensive, doesn't matter. All tools are cool regardless.

[@VCGConstruction]

Thanks Eric, we appreciate it!

[@jamesstephenson2346]

Ya im a new watcher, bit enjoyable vids for sure!

[@travelinman482]

@@VCGConstruction As for the box, you shouldn’t be throwing your tools or box bits around to get damaged. I have a canvas type bag with luggage style wheels and handle on it that I use for my drills and bit boxes. It has multiple pouches that I can stuff each bit box into away from any heavy drills that damage them. Just saying. Great channel though.

[@fumanpoo4725]

I have an itch only tools can scratch...

[@ericvasquez3325]

@@VCGConstruction anytime

[@Keith_Mikell]

Vince with the .5 second missed edit at 5:09 lol.

[@guitfiddle]

I noticed that too! Just started falling.

[@acegamingst5546]

Yo for real

[@zacharysandberg]

Smells shilly that it wasn’t included.

[@RhinoAg]

Zachary Sandberg there’s a reason it was left in there. They’re not dumb

[@leonardpadin869]

I'm impressed!

[@LegendMuscle]

"I'm impressed" immediately cuts scene when tool falls on ground hahaha. Legit though that is impressive

[@TheJustReyes]

I thought the same thing!! Hahahaha

[@sludgetrudger]

I backed the video up to take a second look just to make sure and you are correct

[@dodobird121]

Makita gold line of bits. Love em.

[@randymathews3348]

I did too, like the new xps bits even better

[@skycorrigan6511]

Have you tried the XPS line? I missed out on the Golds, but the XPS are amazing for the price

[@gabefloyd172]

Indeed. Got a box on clearance at HD a few weeks ago and I really dig em. Paid $10 for a $20 set.

[@GodGunsGills]

Those things have some of the best fit!!!!

[@josiplacic1230]

Me2 but wera impaktor bits are even better belive me they have some bite

[@jeffparker360]

Hart hit it out of the park with their choice of colors for the tool line up. Mikita gold bits are my favorite. Milwaukee bits have the largest share of real estate in my tool boxes and bags. Ryobi has let me down way too many times to purchase their bits again. However, I absolutely love the Ryobi tool brand overall.

[@SuperAnimekid]

I'm with you on ryobi

[@scottjanzer8083]

hart's colors remind me a lot of Porter Cable. Unfortunately.

[@greghercher2068]

Am I the only one that twitched a bit to catch the drill when it fell out of the screw?

[@VCGConstruction]

😂😂

[@valpanig]

best part impact driver survived the fall to finish video episode

[@stuckgrenadepin.225]

@@valpanig i have one of these hart impact drivers. Accidentally chucked it about 8-10’ on the street. Not a single issue with it.

[@chadjazeera9960]

No! I totally did too!

[@johntarver5684]

This came up on my recs. He reminds me of a construction worker version of Lou Later from Unboxed Therapy!

[@keyman1969b]

Milwaukee shockwave bits. Insane performance.

[@aar3682]

How many HP?

[@nathanrocks2562]

Yes these or Kobalt bits have never let me down

[@cardo1111]

Always a well done and informative vid, infused with personality. Nice to see you closing in on a well-deserved 1/4 million subs and beyond. I like that you always seem to appreciate your subs. Don't ever change 👍🏽👊🏽

[@welder062]

I called my wife and this is my 21st anniversary gift. Somehow I feel like ima use it once in a while but I'm already there. Good video dude.

[@_LoKo_ReNeGaDe_613_]

Makita did it better

[@MrMCYT]

just bought 2 different sets of Hart Driver and drill bits, paired them with a 15 year old Milwaukee impact and they work amazingly!!!

[@craigditzenberger4551]

Hart is made by the same company as Ryobi, Rigid, and Milwaukee tools. They tweaked a few things to make it affordable for people that shop at Walmart.

[@threestans9096]

so it’s like their oil? supertech is some legit shit. hate walmart but i’m increasing impressed by their auto dept for basic jackasses like myself.

[@txmade4371]

@@threestans9096 Supertech Oil goes toe to toe with any brand out there.

[@garysexton344]

Dude looking for reasons to hate Hart... 😂😂😂

[@shanejohnson800]

I actually bought the hart impact and loved it for around the woodshop Then I ended up buying the drill and the jigsaw is one of my favorite cordless jigsaw’s The grinder not so much the oscillating tool is decent and the heart style Dremel kit is actually really good but as always love your videos keep making them I’ll keep watching them

[@VCGConstruction]

Thank you for the support Shane!

[@bmbaker2k5]

I recently got the Hart stuff. Bit set. Brushless driver and impact. Jigsaw, work light, getting the Dremel like set Friday for the 2 for $99 Father's day deal. I'm liking the whole line.

[@alstraw2481]

I got the brushless drill impact set and larger bit set as a gift. I actually love it. It replaced a 20 year old Dewalt drill and frankly it works way better. I haven't used a newer Dewalt lately but I was really impressed with the Hart.

[@jessihawkins9116]

why not the grinder?

[@JVS_T]

At the community college I go to I took a carpentry class and the school had nothing but Milwaukee and Dewalt power tools. I brought a pair of the brushless drill and impact and the professor was impressed with the capabilities of the hart tools and has been in the game for 20+ years. Sure their not the best money can by but for the price they will get the job done ✅

[@frankieperez5102]

I think it fell 5:07

[@luigynkaren062011]

Lol yup

[@jasonsexton2513]

The question is did it work after it hit the floor?

[@ntvtexan5015]

I've just bought several of the 205 piece, and a couple of other bit sets from the Walmart. They marked the 205 piece down to $18.88, and now down to $13.88. So just saying, they're a little bit cheaper at some of the Walmarts on CLEARANCE in the Tools section !

[@Clare.1985]

There is NO MAN that will ever pass the REAL "just the tip" challenge!

[@j.m.5917]

Too funny!

[@kennyhaworth9606]

There are made on the same factory in China look it up. It would nice of we as consumers had a choice

[@ryanmace8804]

I hold the world record for fastest disqualification! 😁 Does that count? 🤣🤣🤣

[@exlurh4879]

The thing that sets them apart are availability you need tools at 10pm or 1 in the morning you can go get it at Walmart anytime any day

[@tubeshok]

HART Tools has been around for a long time, and many of you know them from their great line of hammers. Owned by TTI (Techtronic Industries Company Limited), Hart Tools is one of several brands including Milwaukee, Ridgid, Ryobi and several others that TTI manages. So it’s not surprising that when Walmart went looking for a new exclusive line of tools that TTI stepped up to the plate.

[@kaylamarie8309]

More bang for your buck, tight fit and best of all..just the tip..just going to put in just the tip. Riiight! I'm dying here lol. LIES! lol. On a serious note, I use tools all the time on the job and I also like the new HART bits . Great deals on them. Not a big fan of those HART 20 volt power tools though..maybe in time they will grow on me as well. For now I'll stick to the major names on those..I've had good results with Kobalt as well. Great vid as usual :-)

[@tylersmith7415]

I used to use the DEWALT bits and they held up pretty well. I recently tried the Milwaukee gen 3 bits and I like the fit and durability better. Matches my m12 tools nice too. Doing maintenance I’m running #2 and torx a lot of the time and the wear guard tip is great. I haven’t broke one or had a slip yet. I got mine over the holidays on deal and there still going pretty strong.

[@thetruebatman4632]

The Harbor Freight Bauer brand impact bits did insanely well on a test here on KZbin against all the contractor grade brands, I’ve been meaning to stop in there and grab a pack.

[@8bitsamurai6]

Yea I like dewalt tools but I think makita and then milwaukee have the best bits. I got a makita set from 6 years ago that still has most the bits. Lost before they break.

[@felixlallangas6983]

After trying the Makita XPS, I became a believer. Have worked really well for me.

[@13ryanheartbreaker27]

Another barrel to pick from, I pick up Milwaukee bits if I’m just picking them up to complete a set (I’m a sucker for matching sets.. M18Fuel/M12Fuel addict.) the only bits I hate are broken ones, because “the reality is...” 😉 that cheaply made bit may be the only bit you have that’s available to finish the job if/when the fancy favorite bit clocks out (breaks).. you’ll love that (hated) bit for saving money on a second rollout cost to drive in those last few fasteners...rare case? maybe but it does happen, I would wager more often then spoken about 🤔.. thanks for the vid as always, keep them coming, hope everyone stays safe.

[@elmauto3021]

Impressive, but I just picked up a 110 piece DeWalt kit from Lowe's for $23 2 weeks ago. Can't beat the DeWalt interlocking cases

[@MichaelJordan-hn4zd]

Please make a quiet impact. That’s the only reason I switched to Milwaukee is the Surge

[@realpatriot5896]

Those type of impacts are not as powerful but they are quiet! Makita makes the best impact drivers!

[@lukie4ever]

@@realpatriot5896 sorry to correct you but the makita's are the quietest and the milwaukees are the strongest

[@fbody23100]

@@lukie4ever makita's build quality is also ahead of Milwaukee but I agree Milwaukee's got slightly more power so that's why I sold my Makita and kept using my Milwaukee 1/4 impact.

[@lukie4ever]

@@RoseUnseen Hahahaha😂😂 genius, then it doesn't matter wich impact you take

[@lowslo9287]

Real Patriot hitachi all the way 🤙🏻

[@Deathstroke3K]

The Hart 68 pcs drill bit set costs 7 dollars more than the Ryobi 50 pcs drill bit set. I own both. Very useful. The Hart kit has more adapters than the Ryobi kit.

[@borgranta61103]

This bit set should work fine with any brand driver. It could also be used in addition to any other set that you already have.

[@NGMonocrom]

Honestly Vince, when it comes to ITT, we know the order of quality that particular parent company emphasizes for each brand. HART, Ryobi, RIDGID, Milwaukee. Literally in that order. No lie, I have Milwaukee tastes but a Ryobi budget. Some things though are just worth paying for.... Milwaukee lamb-skin lined work gloves, along with DeWALT impact driver bit sets. Those sets, last you a lifetime.

[@ewick64]

Picked these up for my workbench build. Wow! Best 20 bucks I spent.

[@thegoatfather9720]

I wish id seen this a cpl weeks ago ryobi drill bits are dooo doo

[@joshuasalisbury7178]

I must admit, I've seen these in Wal-Mart. Walked past wondering if the new Hart tools are decent. I do have some hypertough tools that I bought to fill a temporary need and ended up being impressed. I watched your review of the kobalt miter saw stand. I did buy it for a kobalt 12 inch compound miter saw. After this video, I have subbed. Thanks for your work on this. Keep on nitpicking because that shows you are taking the time to review properly.

[@mfmurray1]

The reason why they look so similar is because TTI tools makes Milwaukee, Ryobi, AEG, Homelite, Empire, Imperial Blades, Stiletto and Hart tools.

[@mrbob581]

Don’t waste money on the cryobi system.... DeWalt still best overall tool system and best long term purchase..... a few extra bucks and buy it once... consumer grade tools usually give poor results or poor ownership experience. if you only need it once rent a pro tool.... As for bit kits, it’s a disposable item.... even if you don’t intend for it to be 😂 If it’s something your gona use all the time and wear out from use, buy the best... Thanks for the review!

[@Todd_S]

I just bought a Milwaukee Shockwave impact driver 120 piece bit set for $24.88 at The Home Depot. I saved over $55.

[@preston2462]

I’m starting to think hart could be the next Milwaukee

[@busterschannel4794]

both Made in China .

[@armedserviceradio]

I only use Dewalt bits.. and diablo blades..

[@dreamcat4]

Another great video thank you! Would love to get ahold of these that would be fantastic. Unfortunately living in the UK Walmart does not ship direct to my country. Looking elsewhere shipping and the markup thru eBay makes them over $50. The other great kit is the Makita XPS and amazon will not ship it to the UK because of their own operating restriction due to the Covid-19. BTW I do not bieve in these supplied plastic case instead both Wera and Trend can sell you something way better. At least they are available here in UK. There are soft textile carrying case designed specifically for bits (i believe it is 'cordura' or something' heavy duty with a stiffener). Those are not going to crack and break on you when its dropped on concrete. Especially when the bits doont stay in their clips anymore, or the hinge / clasp. Less fiddling, faster and more pleasant to get your own 3rd party storage for them.

[@notnvs1]

Have you ever tried the IRWIN Impact Driver Bit Set, 33-Piece (IWAF1333) ? You might love this ! ツ

[@johnmitchell7892]

You have a "magnetic" personality.

[@Aepek]

My number one reason for buying a fastener but kit case... How EASILY I’m able to get the bits out of the case. I have a top 5 for what I’m looking for, & but removal is number 1 (ever remove a bit from a Milwaukee case, ever try it with gloves on; its tight 🤣) .....you kinda have to be a little “picky” with what you are buying & using. The durability of an item is extremely important, who wants to buy anything ($5-$5,000) & have it break first time using; no one. With the way tools are being made, marketed, & that brands are “getting” more competitive & better..... Ya just gotta look at every aspect of an item, just like you said when first reviewing this....gotta have open mind & not be judgmental 😀 Even though Team Red is number 1, & DeWalt maxfit bits are great (cuz can remove from case pretty easily)😉😅 Cheers✌🏼 5:09 nice edit there in post....whomever did it, cutting just as hart fell, smooth😎

[@davidpeters1927]

it is made by TTI which owns Milwaukee and Ryobi

[@allenncrystalking8517]

So glad for these Hart reviews. Thank you so much was so curious of this tool line

[@VCGConstruction]

You are so welcome!

[@mikethompson9745]

I would take you me seriously if you just talked about the product and eliminated the goofy voices or odd pronunciations.

[@jaretsykora8813]

i use Hercules bits from harbor freight with the "screw grab technology" and other than the bits coming loose in the case now that the set is a couple months old, it a really solid quality set

[@mphill1491]

Jaret Sykora I use their Bauer brand. Watch a video from Project Farm. Very informational videos.

[@jeremylakenes6859]

Cheaper tool companies always have better organized cases. They were the first with lights on saws and drills...they start off gimmicky.., but grow into the better brands. Also, Hart is plenty when you visit grandma and need to tune up her doors.

[@VCGConstruction]

Always gotta look out for granny

[@iowafoxoutdoors_8838]

I am a new homeowner/diy guy. I grabbed a hypertough drill/impact/ sawzaw and light combo after xmas for $20. They aren't great but there good for now I got it only for the impact if im being honest. I will be buying dewalt once it dies. But I have been looking for a good versatile bit set and this might be the best option for me right now! Great video!

[@VCGConstruction]

Thanks for the feedback and support iowafoxoutdoors!

[@Chris-fl9hk]

I bought the hart impact and drill combo 40 times better then hyper tough line any day I had a 20 v hyper tough drill was ok but it liked to time out constantly it was ok for your once and awhile home owner projects but hart is the way to go

[@Mikey-ym6ok]

Hyper tough is complete garbage. Had their angle grinder and grease just leaked out of the thing. Glad Walmart went way up in quality with hart. Pretty much just ryobi in a different tool

[@AntonioClaudioMichael]

I use Milwaukee and dewalt and makita xps bits never had good luck with ryobi bits @vcgconstruction

[@stephenwgreen78]

Great review. I like the Milwaukee bits...because red👍😁

[@MrNipperthegreat]

I have ryobi equipment due to versatility but love the quality of Milwaukee bits.

[@paulmazurek3608]

VCG the most Honest demos of tools on the Internet ,im a 35 year commercial master commercial carpenter running jobs over $100 million seen all kinds of tools Thanks great demo

[@VCGConstruction]

Thanks Paul we appreciate it! 👍🏻

[@rennansemensato]

Tell us what do you use Paul!

[@lordrichard8184]

I love ryobi. But their bits stink. I bought some hart long shaft bits. One of the shafts was bent out of the box. It’s not much but does cause wobble when using it. Hart bits are rebranded ryobi bits. And both brands are crap.

[@KuyaPow626]

As a homeowner I can confirm; ive never once touched the nut drivers so i dont care! But its amazing to know these are actually quality- thanks for the review

[@mgm5457]

Hart, Ryobi, Milwaukee ...all the same company TTI or techtronic

[@Dave_Simmons]

For bits and blades, I have Bosch, DeWalt, Diablo, Dremel, Milwaukee, and Ryobi. For my, mostly, Ryobi tools.

[@billofalltrades1468]

Dewalt is my go to but I'm not against trying a cheaper bit when my cash flow is limited.

[@BryanBowenArchangelBarachiel]

I was thinking emergency bits only to finish a job though Walmart not staying open very long now. Wonder how long tell 12a.m. hrs. 1,2,3 years or 30 years. We will see in time. Don't forget dewalt accessory for longer bits if you have it. I also have the Makita accessory. Incase you read this Hart you might want to add the accessory.

[@trentwinston2914]

You just made a good point, Bryan. Because Walmart shortened their hours, I almost never go in there anymore. It just isn't very convenient for me. Since they are literally going head-to-head with Home Depot and Lowe's now, because of their hours. I never ever would buy my tools at Walmart.

[@user-pc5dk7nn4y]

@@trentwinston2914 I would agree, because of their shortened hours, I too almost never go there now. Not that it was a go to place for tools but if you needed something in a pinch you could go there at midnight. Now not even an option, so for that reason i never even consider going there at all.

[@john091077]

They have no plans to reopen overnight. about 90% of theft happened then. yet only about 5% of sales. It's a solid business move.

[@muddrunner7590]

@@trentwinston2914 they lowered the hours cuz so many people was going in late at night and robbing the place blind. Do blame society.

[@knightstalker1972]

Sorry to say but Tti is the parent company of Milwaukee, Ryobi and Hart

[@TC-hs5wy]

I just bought this set today. It seems to come with a magnetic sleeve for magnetizing each bit. The case is well built and holds each bit tight yet can let them out easily when pulled and wont break as the case seems to be made of a high grade plastic that does have some flex to it so when taking bits out and putting them back in it does flex and had a nice hold on each. Im impressed. As soon as their big mechanics tool box goes on sale i will buy it as well.

[@josephkimball3581]

I have that hart bit set and use them every day professionally and have not had one problem with them and it's been a year

[@rwvaulterman]

If you haven’t tried Wera bits you should.

[@spectrewithin85]

they also make great screwdrivers

[@HVACDad85]

I personally love my Bosch impact bits I bought from Lowe's 9.99 special magnetized good gripping bits and half the price of the Hart bits in the video #neverpayfullpricefortools

[@robertbates8599]

I love magnetism also! Thank you so much for your insight once again I deeply appreciate all your knowledge and direction. Hope you had the best week ever! Bob

[@VCGConstruction]

Thanks Bob we appreciate it!

[@Rodonnellflexpkg]

I just bought a Hart drill it is the best I have never heard of the other brand so I don't know!

[@nft8624]

Deleted scene: @5:08 am impressed.!! BANG.!!!

[@bhribik21ify]

Just the tip....it's all we really need lol interesting video brother. Don't know much about Hart tools. But they seem like good bits. I use Milwaukee and Makita bits. I'm spoiled lol. P.s. new camo hat came in the mail yesterday and I gotta say the pictures don't do it justice bro. Very dope 👌👌. Thanks again!!!

[@VCGConstruction]

Thanks Brandon, glad you like it! 👍🏻

[@bwselectronic]

I've looked at them and been tempted. But I would rather get a different brand I've bought Kobalt, Bosch, Dewalt, Ryobi on sale and others over time. Some are even still sealed in the package. Lol

[@felixlallangas6983]

Same here , good to know I'm not the only one

[@luv2bachristian]

I have been very curious about this line. I am still a Milwaukee man but I may have to grab some bits. I just hate that Walmart could not come with an agreement to keep the Stanley on the shelves.

[@jessihawkins9116]

yeah I like Stanley tools. they’re good tools and affordable.

[@onyxtiger25]

I have been using this set on the job(tear down and installation in first responder vehicles) for a year. They have held up and the variety is pretty impressive. Seldom do I have to go outside of this kit to get the job done. I attached a set of metric nut drivers to the outside of the case with velcro, and now I have almost all I need in one kit. For the price it's really hard to top this set.

[@ChristianDad717]

I use a craftsman driver and drill set. 81 pieces. Might not be the best to anyone else. But for DIY and around the house works great.

[@davidb8397]

I recently helped my son in law install a wood fence around their back yard. He has craftsman cordless tools, drill driver, impact driver and circular saw.they worked great and the batteries lasted all day. Made the job so much easier. He also has Milwaukee and I have dewalt but we never took them out. Used craftsman for the whole job.

[@RYOBIKING]

VCG you know this boy loves his Ryobi but there bits are trash 😂

[@VCGConstruction]

🤣🤣

[@calbert1735]

*their

[@Jako1987]

I don't need magnetism because I love stainless screws too much

[@EmeryJude]

My tool bag is red and my bit case is yellow. Yeah... yeah I know.

[@Mixwell1983]

It's okay my tools are orange, bit case yellow and 6" bit holder is red. Someone call the fashion police

[@catgath9718]

My tools look like a paint shop exploded.

[@mr.m2695]

They are made by the same company. Same product different name

[@kyledamole6104]

dewalt maxfit are my favorite drill bits

[@workonitm8]

How often does one need to leave the drill/driver hanging on a screw ?

[@dchawk81]

When you're union or gubmint, you stop dead in your tracks for lunch no matter what's going on.

[@pinkspiders34]

Use makita bits, and bocsh for drilling. Ryobi bits are definitely trash lol

[@DJ29Joesph]

Underrated comment right here.

[@ferguson8143]

Thats weird as the kit I got the nut drivers have magnets in them

[@obiitom]

The drop at 5:08 made me chuckle, hope the driver survived though.

[@brandoncharleswhite7893]

They're pretty tough I use mine daily for work and it's been dropped off of many 2 story homes into gravel and rocks and it's still going strong

[@MyrtleBchsweeper]

Kobalt at Christmas have the best bit sets and they hold up very well.

[@earlycuyler8719]

My son gave me a set of these and I broke every damn thing in it in a week!!!

[@codysmackdown1]

U used every single bit in the box in 1 single week?

[@earlycuyler8719]

@@codysmackdown1 yeah, my wife broke down.

[@xsixinfantryx]

@@codysmackdown1 just what I was thinking.

[@sledsports]

I hate them all!!! Lol on another note I love your reviews..you give them all a fair shake in my honest opinion..keep up the good work

[@bigrobbyd.6805]

Even though I'm a Milwaukee man, my favorite impact bits are those made by DeWalt.

[@floridanelson]

You don't have vice grips for fingers to get them out of the case?

[@wesivester7273]

Hart tools is a rebrand of ryobi tools....I work for ryobi.

[@VCGConstruction]

Wow really? Thanks for the info wes!

[@wesivester7273]

Let me rephrase....hart tools are ryobi built not necessarily a rebrand...

[@loretta1927]

Hi so they are similar in quality as well?

[@joshbolton4916]

Thanks for the review,I seen these at Walmart and was wondering how good they were.

[@VCGConstruction]

Hope this helped you out some Josh!

[@Linkedblade]

@@VCGConstruction I just think it's funny you're comparing Hart to Ryobi and Milwaukee. They are all owned by the same company.

[@jamesstephenson2346]

@@Linkedblade to different specs at different price points. Valid comparison

[@donadams7469]

I've always had better luck with the ryobi bits over milwaukee bits thats just my exp... other users milage may vary... as far as hart vs ryobi I've used both... I've used the 3/8 drive socket adapter they both snapped inside my makita hammer drill on low reverse drill in an attempt to see if I can bust a lug nut loose both failed and snapped... mixed emotions but hey Yay makita!

[@alonzofineart2428]

I use the Milwaukee bits and a similar set with case was only about $9 more.

[@MrColelbarry]

Milwaukee and makita

[@twiztidem]

I was very impressed with my Hart drill and impact set the brushless one of course, got them in late 2019 and still functions like when it was new, and still using the batteries it came with it and very extremely blown away it's been almost 3 years and the batteries still last as long. I was genuinely expecting to have to get new set of batteries within few months.

[@salemkaresllc7309]

I use Mikita xps

[@hotrodder8761]

So do I they are awesome. I bought a set after watching VCG Construction video review on them

[@salemkaresllc7309]

Andrew Irvin same here. After seeing it on this channel. I when to Home Depot the next morning before work.

[@jameshendricks875]

Did you know that TTI is the parent company to Hart, yes, it's true. I bought Hart, and that's all I use. I work construction, a pipefitter, to be exact. Just for people who doesn't know, TTI makes Ryobi, Milwaukee.

[@justindavis4962]

Those goggles you wear get me every time

[@VCGConstruction]

🤣🤪😄 gotta practice good safety habits on the job site!

[@davidekelman5715]

Definitely birth control goggles

[@kinglord5429]

HART 200-Piece Assorted Drill and Drive Bit Set with Storage Case $32.47, this is complete set including masonry bits for typical home users. Review these please i been playing the bit game for years and best had have been Sears brand but gone now. I'm typical home owner so don't need best $$$.

[@terranceriggs578]

I only buy dewalt for my dewalt but I did like the testing of this brand

[@billdavis6978]

Not sturdy of a case? They are no less sturdy than a Milwaukee or Dewalt case. I bought this set for $20 and I would buy it again. My number 2 bits have drywalled two houses and I’m not sure what is wrong with the case? I guess one has to complain about something.