Which Impact Driver Bit is Best? Let's find out! Phillips #2 Showdown

Phillips #2 impact driver bits tested: Milwaukee Shockwave, DeWalt, Makita, Bauer, Bosch, Hercules, Harbor Freight Warrior, Bosch, Wiha, and Irwin. Driver bit "grip" or twisting force required to cause cam out compared to driver bit wear after driving 100 drywall screws into a pressure treated 4x4s. Driver bits tested for metal hardness, twisting force required for cam out after use, and twisting force required to break the driver bit.
Products Tested In This Video (in no particular order):
Irwin: amzn.to/3l5Wnr2
Wiha: amzn.to/2FJ9VbL
Makita Gold: amzn.to/3lf2E3Z
Milwaukee Shockwave: amzn.to/3j3Xh5u
DeWalt: amzn.to/32hm2UW
Bosch: amzn.to/2YiICvt
Hercules: bit.ly/32iXtqK
Bauer: bit.ly/3j4pyJq
Harbor Freight Warrior: bit.ly/2Yr75yO
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/31aince
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

[@ProjectFarm]

I never dreamed the channel would grow to 1 million subscribers. Thank you all very much for subscribing. You are making a huge, positive impact by helping me select products to test, advising on better test methods, and coming up with video ideas that will help a lot of people. Thanks again and best regards, Todd Products Tested In This Video (in no particular order): Irwin: amzn.to/3l5Wnr2 Wiha: amzn.to/2FJ9VbL Makita Gold: amzn.to/3lf2E3Z Milwaukee Shockwave: amzn.to/3j3Xh5u DeWalt: amzn.to/32hm2UW Bosch: amzn.to/2YiICvt Hercules: bit.ly/32iXtqK Bauer: bit.ly/3j4pyJq Harbor Freight Warrior: bit.ly/2Yr75yO

[@korbinvandereyken7311]

@project farm Test twitch bit is the best!

[@jasonallen7091]

I've been subscribed since the beginning. Always knew you'd make it big when I watched the seafoam video. You've given me lots of great information over the years. Thank you!

[@ralphkestay]

You owe us nothing ! You already go above and beyond with the amazing videos ! Proud to be apart of the million subs!

[@Dipncamo]

Need to test out the new rigid tools, do a drill test on some. I know the impacts and drivers are expensive though. But my top 3 impacts are rigid, milwaukee and makita and that goes for any tools in general. Unless it's hand tools I'll get se cheap craftsman stuff or kobalt just for the lifetime warranty. Enjoy the videos I've watched every single one, life long subscriber 🤙🤙

[@JoshuaMuse]

Yes I just see you've reached that. WOW I was in here around 32K. CONGRATS!

[@K3NnY_G]

The sheer amount of labour this guy does for us just to deliver accurate and concise data. Thanks as always for the hard, and constant work.

[@caseytbss]

K3NnY_G thats why he gets millions of views!!!! Watch some of the oldest videos when you get time. It pretty damn cool to see how far he has came with videos and edits! I have been subscribed for long time!

[@stevethea5250]

@@caseytbss BUT WHAT IS AN IMPACT DRIVER? AND WHYS IT CALLED IMPACCT?

[@joshuasutton2163]

Steve Thea An impact driver is a tool that uses a rotational hammering action to greatly increase torque. This action produces torque in very strong, short bursts, as opposed to a drill driver which produces continuous torque.

[@stevethea5250]

@@joshuasutton2163 whys it impact

[@bahionic]

Imagine a bolt that won't move, put a wrench on it and hit the wrench with a hammer! = impact

[@elguapo3527]

Your behind the scenes work: driving to buy wood, screws, material, etc., getting in line, paying, loading, unloading-for each project is appreciated. And drilling 1000 screws! Just a huge thank you. I taught tech ed classes and I know the prep involved. Thank you for answering questions about tools and materials I’ve had for years.

[@ProjectFarm]

You are welcome!

[@RebeccaQueen-ti1bk]

Allah is one God God is Allah Allah has 99 names Allah is almighty

[@RebeccaQueen-ti1bk]

​@@ProjectFarmfear Allah

[@hamzaahmad97]

@@RebeccaQueen-ti1bk ameen

[@MarioGoatse]

@@RebeccaQueen-ti1bkAllah's wife was a child

[@thardyryll]

February 2022 update: At some point Milwaukee changed its packaging to claim “up to 30x life” instead of “50x.” I wouldn’t be the least bit surprised if Todd’s work here was a factor. Gotta love that.

[@riba2233]

Nice. I feel if they are exaggerating they should have written up to 1000x life lol

[@alexanderdark6864]

I can't imagine anyone being fooled by such extravagant claims anyway. I don't know why they even think that's good marketing. Still though, Milwaukee is lookin' real good right now.

[@Xxmeca421xX]

The goofy zone is just a piece of plastic to hide the narrow metal too lol

[@RebeccaQueen-ti1bk]

​@@Xxmeca421xXAllah is one God God is Allah Allah has 99 names Allah is almighty

[@RebeccaQueen-ti1bk]

​@@alexanderdark6864Jesus was not killed nor Jesus was crucified

[@dmanhd143]

Project farm’s videos are the ones where you think. “No, I don’t need to know this.” But when you watch it you’re like, “Wow, I actually learned something valuable today”...

[@eugenetswong]

Yes, exactly. My favourite is the recent wall anchor video. I never felt comfortable installing them, since I don-t expect them to last long, and since I expect them make the wall worse. His video provided such a broad spectrum of results, that I felt that I could choose a product wisely for my needs.

[@fred_e]

@@eugenetswong This channel honestly has the greatest value to humanity in all of KZbin.

[@eugenetswong]

@@fred_e that's a great way of saying it. :)

[@ProjectFarm]

Thanks so much!

[@didarfarage7129]

"honey what are you watching," "some guy driving 600 screws into wood"

[@mikeyeyes7]

🤣🤣🤣

[@ProjectFarm]

lol Thanks for watching.

[@kilianortmann9979]

I like work. I could watch it all day.

[@ElGalIo2]

Didar Farage 🤣

[@MichaelRogersJesusrules]

lol.good one :)

[@dickdastardly5534]

Your channel has grown so well because the topics and testing you cover are first class and impartial, you are doing the public a great service sir, thank you and keep it coming 👍🏻🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@Luke_735]

Thank you for testing multiple Harbor Freight brands! Many of us are just humble DIY/enthusiasts and don't need the absolute best, so budget focus is key. Knowing how the various HF brands compare is super important.

[@ProjectFarm]

Thanks for sharing.

[@dmac1259]

If you dont want to pay for big name brands then definitely stick with harbor freight and stay away from heart. I used to buy heart bits because I live really close to a Walmart but I didn't live close to a hardware store and I broke so many of those impact rated heart bits it's not even funny. I will tell you though Milwaukee bits are worth it they will last far longer than any budget bit in my experiance.

[@nicwelch]

@@dmac1259I bought a four pack of Hart bits to match my impact and I have to say they were great for me. Though I do have to say that for a little more money the Milwaukee bits really cannot be beat!

[@RebeccaQueen-ti1bk]

​@@nicwelchAllah is one God God is Allah Allah has 99 names Allah is almighty

[@RebeccaQueen-ti1bk]

​@@dmac1259fear Allah

[@NeverSnows]

Can we take a minute to appreciate the effort that was put on the making of this video?

[@ProjectFarm]

Thanks so much!

[@Sc0rphionx]

No we can't.

[@huntzkush]

Must've been exhausting lol

[@arekthekingsecondaryaccoun4208]

Never Snows yeah but I'm not liking ur comment

[@NeverSnows]

@@arekthekingsecondaryaccoun4208 never asked LMAO

[@GAZMANFOREVER]

So the bits scratch at a level 6, with deeper grooves at a 7? *JerryRig has entered the chat*

[@ProjectFarm]

lol. Nice! He's got a great channel

[@thatdude5104]

@@ProjectFarm No, you have a great channel ;)

[@mathewmantas]

@@thatdude5104 No, They both have great channels! :D

[@luukieboy886]

Haha

[@bignoseharry6561]

Jerry Rigged ? Hmmn, is that sorta like "Jew'd Down" ? I bet there's not a site with that name on KZbin.

[@thegodofwar94]

Bruh the extent to which you go for your tests is insane. We all appreciate your work man 🙏

[@ProjectFarm]

Thanks!

[@rodwilkins1614]

Bruh? Wow, your down with the kids aincha?

[@uswee]

I have been an industrial mechanic for almost 30 years. I have seen and used lots of tools and techniques. I always look forward to your reviews. You have never let me down. THANK YOU.

[@phoenixfireclusterbomb]

Soooooo, what do you think is best phillips bit!!!?

[@uswee]

@@phoenixfireclusterbomb The one that fits best. I have had good luck with Milwaukee and Dewalt.

[@houtworm001]

This is how EVERY review should be. Straight to the point, just the actual facts, and honest. 👌

[@ProjectFarm]

Thanks so much!

[@Czechbound]

Hear Hear ! That was indeed excellent ! He's like the Athlean X Channel for fitness : good facts, no BS

[@ratchetwise440]

And the replies should be exactly what he had asked for at the eng of the video Makita Gold, Milwaukee close tie

[@rkgaustin9043]

Seriously, there should be a "rated outstanding by Project Farm" sticker on all the best products. It's the only recommendation I trust!

[@redsite001]

On the product packaging it should say "Tested Approved by Project Farm"

[@dank9288639]

Serious shit tho lol, I come here before I buy anything tool related and oils etc

[@jeffreymichael5404]

100%!

[@randymathews3348]

Or AvE

[@tracewallace23]

@@randymathews3348 not as scientific, but a lot more humor. I'm staying away from his vise😉🤣🤣

[@Anagonwolf]

Gotta say, after years of real life experience, I've always gone with Milwaukee bits for Phillips and Torx bits, along with the socket adapters. I was afraid it might have just been brand loyalty at first, but the performance was there. Your lab testing conditions coincide with my experience. Thanks for the effort you put into this video!

[@RebeccaQueen-ti1bk]

Allah is one God God is Allah Allah has 99 names Allah is almighty

[@chilltrip393]

Hey man...there is a company in Germany named Würth and I have been using their screws, blades, driver and drill bits, grinding and cutting wheels for 13 years now and I also tried EVERY SINGLE bit, wheel, blade and screw on the market in Europe and NONE of them come even close to Würth. If you are not from Europe you should definitely need to try anything they offer. Every bit they have lasts me for very very long time (having in mind I use them 6 days of the week) and it is worth every single cent you spend on it.

[@RebeccaQueen-ti1bk]

@@chilltrip393 who is your lord grave first question

[@chilltrip393]

@@RebeccaQueen-ti1bk I don't have a lord. I am human.

[@stevenlefebvre2991]

Always so impressed how you come up with ways to test the products that you do. Great job please keep up the fantastic work.

[@ProjectFarm]

Thanks and you are welcome!

[@TheThatoneguy12121]

This man is literally The Scientific Method for tools and hardware! Absolutely applaud the enormous amount of effort you put into these videos!

[@ProjectFarm]

Thanks!

[@ck5575]

new nickname; 'The new Science Guy'... TY!!😁

[@RebeccaQueen-ti1bk]

Allah is one God God is Allah Allah has 99 names Allah is almighty

[@RebeccaQueen-ti1bk]

​@@ProjectFarmdog not allowed ect

[@RebeccaQueen-ti1bk]

​@@ck5575don't die as a disbeliever

[@chevyon37s]

You should sell “Project Farm approved” stickers/ seals of approval to fun some more fun testing....

[@hillbillyohio513]

Sign me up for four please!! Great idea bro I would be proud to put a Project Farm sticker on my truck and tool box.

[@erikdempsey8019]

@@hillbillyohio513 I agree.. I would proudly put a Project Farm sticker... especially if it would help support his channel...

[@eugeneshealthproject]

If you go that far you may have to list your test for traceability to the National Bureau of standards and your testing procedures must be repeatable with identical results. Your torque wrenches must be calibrated and certified calibration to the National Bureau of standards. Everything must be standardized to maintain credibility. It now becomes a great Responsibility and Honesty because one slip up and you can loose all credibility. I wish him good fortune on whatever route he takes. I hope he becomes the best testing agency in the world.

[@johnputnam1440]

I’m always impressed with what you test and am often shocked with brands that seem to be popular. That being said, how about doing a video on padlock lubricant and outdoor padlock deicer? Thanks for what you do!!

[@ProjectFarm]

Thanks and you are welcome! Thanks for the suggestion.

[@200130769]

I'd also be interested in a padlock lube video.

[@RebeccaQueen-ti1bk]

Fear Allah

[@RebeccaQueen-ti1bk]

​@@ProjectFarmdon't die as a disbeliever

[@RebeccaQueen-ti1bk]

​@@200130769trade interest not allowed

[@fredieeguevara4869]

Your hard work in maintaining neutrality in your tests is very much appreciated. Something that I would love to see tested is windshield wipers. I live in a hot dry climate and find myself replacing them often and wandering if the more expensive brands are any better than the cheap ones.

[@ProjectFarm]

kzbin.info/www/bejne/nWS2aaiairh-qrs

[@jcewl93]

My personal experience has shown that the cheapest silicone beam wiper blades off eBay last longer and perform better than the expensive blades from Walmart. I'm talking about a $12 per PAIR set of blades vs $60+ per pair!

[@jamnchips]

Imagine explaining to the significant other why you have drilled ~1k screws into wood for 'no reason'. You, sir, are a legend

[@ProjectFarm]

Thanks!

[@seanrussell4489]

@@ProjectFarm It's modern art!

[@dougjb7848]

@Jam'N'Chips Either that or bat-crap crazy.

[@djjazzyjeff1232]

The logical next step, Torx (star) bits! I'd love to see a test on those since I steer clear of Phillips heads generally, if it's practical to use Torx I always will!

[@brodriguez11000]

For consistency in driving. Only thing for really tough wood is hex head.

[@djjazzyjeff1232]

@@brodriguez11000 For my trade (weatherization) I find that I am always upsidedown twisted around reaching over one thing and under something else trying to get a screw into something in an attic or a crawl space stretching as far as I can, so nice even pressure isn't really possible in most real-world situations, so I always go Torx because if you can get the bit on the head, it'll drive that baby in. Why is rarely the case with a Phillips head, often it'll round out the head of the screw and damage the crap out of your bit, making the next screws even harder to drive in.

[@TheSzalkowski]

I agree, would be interested to see if the brand results are comparable. Add in Norske bits, I have heard good things about them

[@kameljoe21]

Torx, hex, square and the 3 sided square are far better than Phillips. Though I steer clear of most torx screws and bits as I tend to snap them more often than not.

[@Xanthopteryx]

Yes, WHO in their right mind uses Phillips?! At least Pozidriv is a minimum nowadays.

[@johnd7564]

First video of yours I've ever seen. But I've seen hundreds of others' reviews. You REALLY stand out for providing clear, objective data. Instant like and subscribe. Wow! I just noticed there are nearly 2M subscribers for this channel. Well-deserved, I'd say.

[@ProjectFarm]

Thanks for watching and subscribing!

[@juliendillingham6257]

10 brands, 4 tests, 12 minutes, clear data, fully unbiased etc... You can't ask for much more.

[@edwardsolyanko831]

My one and only. Best and favorite channel for tool reviews. Thank you so much for all the effort and time you put into these videos. From buying and driving to editing. Truly appreciated by me and by millions of others.

[@ProjectFarm]

Thank you very much!

[@CTw0H5OH]

I'd like to see a comparison of the different types of screw types. I think the Robertson screw is the best as I've never stripped one.

[@ProjectFarm]

I'll check back to see how many likes this suggestion receives and hoping viewers will suggest brands they want tested. 100% of the ideas and brands tested are from viewer's recommendations. Thank you!

[@user-zz8ln3uh5x]

I'd also like to see that. I think it'd be informative to include varieties like GRK's star-drive and Spax's T-Star Plus.

[@JoeUrbanYYC]

Yep I'd be very curious of Robertson vs Torx along with any cost differences between screws of those bit type.

[@boots7859]

@@JoeUrbanYYC I'll Fourth that. Robertson being square seems like it should be exceptional.

[@diarmuid858]

Ya I’d love to see pozidriv too

[@jethrowomber]

The best bit, is the one I can find when I need it.

[@craiggiese5037]

Yes it is Haha

[@MarantzSt153]

*THIS*

[@spookytowie7838]

I can have a 100 of the Damn things and never can find one when I need it. 😆

[@ArtzierzDJ]

So true

[@SteveReynold]

For me that’s none ever.

[@Winters506]

The thoroughness of this man’s channel and effort he puts into bringing the most non biased product performance and information is unprecedented. Such an exceptional channel to watch. I will not buy a tool without checking to see what his findings were first.

[@ProjectFarm]

Thanks for sharing.

[@paulkoby2241]

I agree with the other commenters that your test seem to be honest and straight forward. The test also supply relevant information. Thank you for your efforts.

[@ProjectFarm]

Thanks and you are welcome!

[@FNGstationtwentyeigh]

I most definitely appreciate the effort and seemingly unbiased evaluation you make on each and every product reviewed..

[@ProjectFarm]

Thanks so much!

[@Adviceblock]

Agreed!

[@blueboywonder9353]

No kidding

[@SlideEverything]

I don't think he is sponsored so he can say whatever he wants about them😂😂😂

[@sorsorsor11]

When I'm ready to find a wife I will employ this guy.

[@kennethhicks2113]

LOL! Dang, too late for me!

[@CJ9007]

He’ll find ya the best one

[@swampratt36]

Dammit man , y'all fellas just ain't right 🤣 but on that note , wish I had a set of mud grips made of it .😳👍😬

[@pebblez_]

God damn

[@megatrolltrollington]

@You Wish I'm interested to see the results of this test.

[@jimjacobs5825]

I love Wiha bits. They’ve been the best for long jobs by far and as far as I’m concerned, the extra work they do is worth the price difference.

[@ProjectFarm]

Thanks for the feedback.

[@i_know_youre_right_but]

Just wish they did larger sets like every other brand.

[@greer776611]

I always buy the cheapest impact bits- but I brake them too often! I'm very thankful you have these tests- helps provide the info we all need to find the quality products we can afford.

[@ProjectFarm]

Thanks for sharing.

[@armyofshea7941]

“On the next Project Farm we test who makes the strongest Whiskey”...... then we see the M.E with a close up of his liver, “now that’s a lot of damage.”

[@spicyF1]

I would love for him to document his methodology for that test.lol

[@e1woqf]

🤣

[@algalkin]

Which whiskey can make you drunk faster? Which one's effect lasts longer?

[@dadawesome784]

@Project Farm- I’d offer my services to collaborate on this study.

[@stanwooddave9758]

I was taught it's Whiskey & Wild Women. So, if he needs a hand with some Wild Women, as a widower, I'd offer my service's. So he's not putting his life at risk from his wife. LOL

[@SlipFitGarage]

I've said it several times before, and I'll say it again.... the amount of effort you put into creating these videos is very imprssive. Nice work.... AGAIN!

[@snoopdogie187]

I used the dewalt bits for awhile, which were great when I was using a 12v impact driver. Very little issues with them, and they didn't wear out that quickly. Now that I upgraded to a 20v impact driver, which has some power, the old dewalt bits shatter quickly, sometimes on the first use.

[@ProjectFarm]

Thanks for sharing.

[@Finksta951]

I think this may be the only channel left on youtube that has not sold out. I've never felt that this guy has had any bias on any of his tests against brands. If I am looking for pretty much anything and I find my self left with more options then time I will look and see if there is a project farm video first. Thanks for all the hard work and great videos.

[@ProjectFarm]

Thanks and you are welcome!

[@TheClearSight]

for the normal average man you will never get a better testing channel on youtube than this. the amount of information and obversval data you get here is just insane.

[@ProjectFarm]

Thanks so much!

[@firecharger]

America's favorite farmer scientist! You've found your calling in life.

[@watcher13th]

Scientist? LOL

[@maximumfunk5484]

watcher13th I mean he uses very controlled scientific method to do all f his videos. Making sure everything is constant and testing multiple variables but only one at a time.

[@MrTexasdieselguy]

He is very much a Michael Farady style of scientist.

[@carlotodaro5052]

I'm not surprised how much you've grown. Excellent job and there's no way I can leave this site without subscribing. You put a lot of time, work and money into your reviews. I'll be checking out your reviews on drill bits and seeing what else I need to learn. thank you

[@ProjectFarm]

Thanks for watching and subscribing.

[@davidrim8309]

I remember seeing this video a while ago. I find myself coming back to review your recommendations. Thanks for all your work.

[@ProjectFarm]

You are welcome!

[@shane6023]

ok so i'm 1 minute into the video and i'm just gonna hve to stop it there and say the amount of effort you put into all your videos is amazing. No other channels out there like it. 10/10 love your content

[@ProjectFarm]

Wow, thanks!

[@matthewmccalister5594]

I agree 100%! I love the tests he comes up with and how methodical the whole process always is.

[@jaystepien921]

I'm impressed as well. Very professional!

[@jacobbryan498]

@@jaystepien921 Haha, I literally just commented the same thing. Such a great KZbin channel.

[@kevinwallace1499]

This video really had an impact on my purchasing decision.

[@jimdavis1566]

Me too. I realize I've been screwing up.

[@evertith]

I see what you did there

[@kevinkent6710]

@@jimdavis1566 That is a bit sad.

[@nofthet5548]

can we please keep this thread going ?

[@AudioHead809]

NATH TAYLOR depends on the thread pitch

[@UnlimitedPossibilities345]

My personal observation has been that the Milwaukee brand tips last the longest. Great to see some actual side by side scientific comparisons to back it up. Thanks for all your efforts! Great video!

[@ProjectFarm]

Thanks and you are welcome!

[@stephenparchewski1998]

I do agree…not just because I’m a Milwaukee fan, but they are good bits. The only exception are Robertson (SQ2) impact driver bits. Don’t ask me why, but the best ones I have ever used have been Dewalt ones. When they grip the bit, it actually takes some effort to get the bit out of the screw.

[@RebeccaQueen-ti1bk]

​@@stephenparchewski1998trade internet not allowed

[@RebeccaQueen-ti1bk]

​@@ProjectFarmsuicide not allowed

[@RebeccaQueen-ti1bk]

Dog not allowed ect

[@jeffreykbevins7116]

Great video, thanks for doing this test on the bits . As always, be careful and stay safe and I look forward to seeing more of your content for us . As always, Jeffrey !!!

[@ProjectFarm]

Thanks and you are welcome!

[@mikesummers2525]

Can I send you a Father’s Day card because you’ve taught me more than mine.

[@ProjectFarm]

Glad the videos are helpful

[@noahkladivo3752]

I think thats a no...

[@louis84100]

@@noahkladivo3752 treated like a stepchild haha

[@mharrison1325]

Aww shut down. I'll be your dad if you need. My kids keep licking things when we're out places, I need at least one kid who's lower maintenance.

[@jaywagner13]

Lol

[@anonymoose6873]

This had impacted my life and twist forced me to hit the like button

[@ProjectFarm]

lol. Nice play on words!

[@LochyP]

I was driven to subscribe

[@Jako1987]

Nice bit of information

[@LochyP]

Screw this, you win.

[@tiagoguerreiro9567]

Me to and I subscribe. Great contents. Almost 1M 💪

[@karl3349]

Just started reviewing your great drill bit and driver bit tests. Thanks for the great reviews!! It really helps in choosing items worth the money. I bought Milwaukee Shockwave impact bits before watching this video. As a do-it-yourselfer that wants quality that will last, it looks like I made a good choice. Thanks!!

[@ProjectFarm]

Thanks for sharing.

[@esauugarza4255]

I want to thank you for what you do, I newly discovered your channel and I am hooked. Being a industrial mechanic 12 years and now a maintenance supervisor you sure help on making tool decisions.

[@RebeccaQueen-ti1bk]

Allah is one God God is Allah Allah has 99 names Allah is almighty

[@JoshTolbertUrbana]

The Bauers seem like a surprisingly good bit for the money. Here's a suggestion: try different drive types. I'd love to see a similar comparison for square-drive/Robertson, Philips, JIS, Pozidriv, Torx, and hex/Allen. When building stuff I tend to gravitate towards square-drive, Torx, and hex, but I've been really impressed with JIS when I've encountered it on Japanese motorcycles. Thanks again for all of the work you do for these videos.

[@SusWorkYT]

I agree with you Josh

[@ProjectFarm]

Thanks for the video idea.

[@bertgrau9246]

@FoxRcng708 I like the torx bits best, less likely to jump out of the screw . I go out of my way when I need screws to get the torx and stay away from the Philips

[@MrWalleye]

We mostly use Robertson's up here north of the border. Would really like to see how they stand up.

[@niels-173]

Since i started using torx I never bought philips heads anymore, torx almost never slip out even using minor pressure

[@ethanstout8226]

Bauer is next level. HF’s best kept secret. Cheapest and best of their “premium” brands.

[@OneMouseGaming]

I love my bauer drill/driver set , add in the LED light or two as they are a must. I really wish they sold a battery contact cover. I don't like having lipos sitting around with exposed contacts. I also got my compound sliding miter saw but i had to do a LOT of hand work and sanding to get the turntable and outfeed ledges to be level and true. That saw with my own zero clearance throat piece and my own DIY zero clearance fence. I had to put work into making the tool do what i wanted, + build a 3 foot infeed/outfeed table and tie it into the fence, but all the tools from HF that i have gotten have been champions. Even the belt/circle sander combo. I had to tweak the motors position to tension the belt, but adjustment is to be expected in any direct belt driven tool.

[@johnboykin3128]

I bought 2 for my last remodel, and owned a hammer drill for 3 years. Super tools

[@delta34golf]

So much awesomeness coming out of the Bauer line lately. Soon 5AH batteries.... maybe even 8AH batteries.. :D

[@Boostiverse]

I’ve tried most of them and makita gold are really the best all around, they don’t strip out too bad and they also don’t snap

[@Anomaly188]

It's not even their 'premium' brand. That's supposed to be Hercules. Bauer is their enthusiast semi-pro line.

[@MZ-mu6om]

Your absolute thorough commitment to this demonstration has me in the new SUB coloum. Many thanks and much appreciate your work.

[@ProjectFarm]

Thanks for the sub!

[@lancewalker429]

I am extremely grateful for the work that you do. As these bits are sold in bulk and are often used the most on a job site, these tests have shown me how important it is to figure cost and longevity into my future purchases. I wish I had watched this video before buying a pack of Milwaukee bits (after leaving harbor freight), but at least I know I'll be able to save some money when I inevitably have to replace them. Thanks for the info and all of the work you have done and continue to do. I'll try to be more patient and let you find the best options for my future purchases. You've not led me wrong yet.

[@ProjectFarm]

Thanks!

[@k5ryannc]

You've made it to 1 million subscribers because you do a great job! Keep up the great work and content!

[@ProjectFarm]

Thanks! Will do!

[@jahughchaffin6616]

O

[@SomebodyYouKnew]

Hey KZbin THIS GUY NEEDS PAID MORE!! He never does sponsors like these other sell out youtubers and he works so damn hard!!

[@BloodSprite-tan]

hey you see his Patreon link. that's what that's for. if you can support the channel go ahead.

[@brocksdaddy081910]

Him and AVE are supported by patreon and KZbin adds so they are not beholden to sponsors and we get a truly un-biased review.

[@erosennin4444]

I thinks he's doing good for himself. He's really close to that silver KZbin trophy at a million

[@noidle22]

I got 5 ads on this 12 minute video. He's alright.

[@ShutterMAX]

Hey, love the videos. Can you do a comparison between Robertson and Phillips

[@kevinperalta9555]

The amount of work put into this video is astounding and very respectable. You have my complete respect. I already follow you and I'm glad i do.

[@ProjectFarm]

Thanks so much!

[@andrewcrossman2165]

Im an electrician, ive been using the same Milwaukee impact bit for five months, used every day all day, still going.

[@ProjectFarm]

Nice!

[@RebeccaQueen-ti1bk]

Trade interest not allowed

[@RebeccaQueen-ti1bk]

​@@ProjectFarmsuicide not allowed

[@Mkruzer]

Had a pack of Bosch they would consistently break at 1 per every 4 concrete screws. Changed over to Milwaukee and drove 8 more screws without one bit breaking. Sticking with Milwaukee.

[@mustafanaik5866]

I have worse. I gotta work with old black and Decker bits

[@tjlabbee7856]

Look up Robertson bits.

[@randymathews3348]

@@mustafanaik5866 no.. You don't

[@mustafanaik5866]

@@randymathews3348 the bits that come with the drill. What do you mean?

[@randymathews3348]

@@mustafanaik5866 you can buy better bits bro.. You run your saw w the blade it came w?

[@jamdc2000]

Shop teller: Why do you buy different brands? Me: Project Farm

[@ProjectFarm]

lol Thanks for the feedback.

[@cameronbarbour2500]

11:48

[@cliffennis9371]

Quite simply the most thorough test I've ever seen on screwdriver bits. Certainly made my future choice much clearer. Thanks.

[@ProjectFarm]

Thanks and you are welcome!

[@trig]

I have found that grinding the first 1mm of the tip of my driver bits has reduced cam out considerably. I use mostly stainless steel screws, in oak, and the screw heads are not always as well formed as they should be. Removing that first mm ensures the lands of the driver bit seat properly. It works so well that I now do this with all my driver bits as soon as I buy a new box whether they are for driving stainless or standard steel screws.

[@ProjectFarm]

Great tip! Thank you

[@1pcfred]

Heh I thought I was the only one that ground Phillips bits. But yeah when they get worn out I'll regrind them and they do seem to work better than new then.

[@mediocrates1937]

This is a good tip, I do it as well. It makes the bits more like JIS bits (Japanese Imperial Standard) which are standard in Japan, and though they look nearly identical to Phillips #2 bits/screws, Japanese bits/screws are not designed to cam out. Their engineering philosophy insists that an engineer design a torque rating for every single fastener used on an item, whether it be an automobile or a kids toy. It's neither better nor worse, just a different philosophy than the U.S./the West...

[@cadelfistro1824]

you can buy grund down phillips bits, its called PH2G or PH2R. they are made for self tappers like you used!

[@1pcfred]

@@mediocrates1937 sure the "I" doesn't stand for Industrial? And yeah JIS does make a mess of things. I just love standards. There's so many to choose from!

[@chauntikleer]

"I never dreamed the channel would grow to 1 million subscribers." You got there by delivering high quality content with an understandable, no-nonsense/no-fluff delivery. Much of it is applicable to me - a fairly handy guy that likes to do a lot myself - and I really enjoy your videos. Thanks for helping us get thorough the coronavirus lockdown. I strongly prefer Torx and square drives. If you haven't already, I'd love to see a comparison of the performance of the common drive profiles.

[@deadchannel991]

Oh same here. More surface area=substantial difference in grip.

[@duramax78]

Yes please do a Robertson comparison.

[@duramax78]

You ever see AVE videos, check him out very awesome channel also.

[@geothelameule]

@@deadchannel991 friction does not depend on surface area, only on support reaction (ie how much you press on the thing) and on coefficient of friction between the two materials

[@5714sqd]

I worked in the aviation industry for almost fifty years and screwdriver bits are important. There are two brands that are used frequently, Apex and Airtek. Both are very well made and last a long time. Both resist tip wear and stand up well to impact drivers. Aircraft use machine screws made to a high standard and demand a decent driver tip that resists cam out. I have been retired for many years but still use bits from my working days, a testament to their longevity.

[@nathanclark2424]

Out of curiosity, are Philips the most common screw where you worked, or is it a different type? And so cam out is no longer useful to avoid over torquing?

[@hafeezjones9086]

this guy put in lots of work in his video great job man

[@ProjectFarm]

Thanks and you are welcome!

[@TheHolyFlapjack]

I would just like to give a tip, when you’re using the impact gun as much as you are in this video, as a dewalt owner myself, I have had a few drills burn out and I could never figure out why. The problem was that when under heavy load (like this video) I was covering the air ports to cool the motor as it is spinning in order to apply downward force like anyone trying to make sure the but doesn’t slip off, and it caused the motor windings to heat up and short out. My tip to you would be to rest you’re hand on the very back of the drill and not block the air ports to allow your impact gun to cool and live a much longer life.

[@bdragonseven]

At work, my little Milwaukee impact heats up pretty badly when I'm holding it down. The air coming out of it can and has gotten so hot, it burns the hand that's being used to hold the bit in place. Imagine the grease Carnage going on inside the thing!

[@dozer8065]

Not really a tip more of common sense, but thanks for pointing that out, ive seen lots of people do this, i found out just by the heat my handfelt and put 2in2 together

[@jesseserfling6807]

I have a friend who is an old sheet rocker he has his corded drill that he uses always on to keep the fan moving air over the motor. He swears by it

[@MrCellardoor7]

jesse serfling Absolutely correct, keep the circular saw running a little longer before and after the cut too.

[@bblwarrantydepartment981]

The Holy Flapjack that’s why I love my makita vent on the side

[@Davis38]

You are very dedicated on what you do, I think that you are the best testing channel there is on KZbin! Thanks for the content you bring us.

[@ProjectFarm]

Thank you very much! The positive feedback means a lot!!

[@WineScrounger]

I’ve said it, but it bears repeating 👍

[@NoWr2Run]

DAMN RIGHT HE IS, TAKES A HELL OF A LOT OF TIME & THE STUFF HE COMES UP WITH TO DO TESTS ARE UNMATCHED. LOVE P. F.

[@ronroberts8036]

I've watched a dozen or so of your vids and just now subscribed. You provide by far the best education on tools and products I have ever found in years of perusing the net for research to make my own purchasing decisions. If I may make a request, please include Vessel tools in your future testing. They specialize in screwdrivers and bits mostly but also some other tools as well and are excellent quality.

[@ProjectFarm]

Thanks for watching and subscribing! Thanks for the video idea.

[@raphealwood4434]

I'm a fan of the Bauer brand.. I bought some just needing a quick replacement. And have noticed that as far as quality goes there well above the others. The way they grip to inside the screw is amazing!

[@ProjectFarm]

Thanks for the feedback.

[@bocrocks]

I use those Milwaukee bits every day at work, but i would love to see a comparison like this of the longer bits, like 3 and 6 inch

[@satibel]

Second that, seeing how the longest bits compare would be interesting, my guess is that they might actually last longer because the shaft flexes more.

[@cajunice3588]

Dewalt would last us about 1 box of 3 1/2 screws since switching to milwaukee we are at 10 boxes and counting so for us it's a clear choice

[@aidanhoffman3410]

Absolutely phenomenal video. No fluff, just full of data. Love it

[@ProjectFarm]

Thanks!

[@ithefy5830]

Great Video as always.i think people dont appreciate your work nearly enough so i appreciate your work.

[@ProjectFarm]

Thanks!

[@wombatburrito5896]

As a tradesman , I sincerely appreciate your work. It is absolutely priceless being able to know what product chooches best without having to do all the crap you go through. Gods bless you and the work you do brother . Thank you from a humble glazier

[@markthompson5983]

I see you watch AVE.

[@cowboy41231]

Aunties your uncle?

[@Nelson-sr2bi]

Men of culture

[@Mast3rJed1_]

You're almost to 1,000,000 Subs! Almost exactly three years since your first upload, Congrats 👏 🎉

[@ProjectFarm]

Thanks for watching!

[@toolisbalance]

Straight to the point, exactly what I was looking for. This guy deserves a gold star 🌟

[@ProjectFarm]

Thanks!

[@justCarner]

I LOVE the Makita bits both gold and their regular silver finish, even though I’m a Metabo HPT guy. Speaking of, Metabo HPT just put out a brand new bit set that people like me have been longing for and the case is the best in the business for sure, I haven’t put much work in with the hardware inside, but it’s black and looks nice with a little green branded logo band around each piece, similar to other common bit sets. I am just impressed with the case.

[@ProjectFarm]

Thanks for sharing.

[@16klu]

I live in Poland and probably will never use any of those, but your tests are just awesome, detailed and accurate. Pleasure to watch. Thanks!

[@ProjectFarm]

Thank you very much!

[@tomdrap7977]

Milwaukee Shockwave, DeWalt, Bosch ,Makita gold (sam ich używam bo miałem dość końcówek które po paru wkrętach były do wyrzucenia )... wszystko do kupienia na allegro

[@ACoTam2]

używam Milwaukee Torx T25 i jestem zaskoczony. całą drewnianą altanę (domek) 15m2 na 3 bitach. problem jest taki, że kupiłem paczkę z 25 bitami...

[@davidreynolds9649]

I have seen Milwaukee becoming more popular and more available in the UK

[@simeonbonev4111]

What tools brands are considered best in Poland ?

[@realkilju]

Cant imagine how much work goes into making these videos! All i can do is say THANK YOU!!

[@ProjectFarm]

You are welcome!

[@lazzynomad]

Very good point!

[@dessertman1181]

One of the best channels by far on KZbin very comprehensive and well done I just subscribed to you today

[@ProjectFarm]

Thanks! Thanks for watching and subscribing!

[@truthserum9157]

Videos like this is why I keep watching your channel, in just over 12 minutes you can find out what’s taking me years to find out, that’s why I almost always use first Milwaukee, second Makita, third DeWalt.

[@ProjectFarm]

Thanks! Glad to hear!

[@exulan9570]

<a href="#" class="seekto" data-time="334">5:34</a> scratches at a level 6 with deeper groves at a level 7

[@nathanvaughn7744]

Take my updoot

[@FakeJeep]

I see you're also a man of culture.

[@andykay4554]

"All we do is remove 1000 screws and your good to go"

[@ProjectFarm]

Thanks for the feedback.

[@Kurushineko]

Scratches at level 6 with deeper grooves at level 7

[@zubairejaz5188]

😂

[@warreschuurmans6462]

Glass is glass, and glass breaks

[@Dhdiebrhd]

JerryRigEverthing

[@bonob0123]

corny

[@chris4749]

Thiago Moreira 😂😂

[@kylernapier975]

The effort you put into these is amazing

[@ProjectFarm]

Thanks!

[@channelsixtyseven067]

Your channel is an invaluable resource and I enjoy watching it. Cheers.

[@ProjectFarm]

Thanks for watching!

[@carbineZDH1]

It would be cool to see a video comparing the different types of bits like Philips, torx, square drive, etc.

[@ProjectFarm]

Thanks for the video idea.

[@mikeries8549]

Already done it. Square is bad. They snap off. Torx are the ones you use when your labor force are wussies which is what you get for 15 buck an hour.

[@BennyFlyby]

I'd like to see other type heads as well. Phillips are terrible because they cam out and strip easily, Robersons are good until they wear and start rounding out as well. Torx are great but lately I've had torx bit heads breaking in the screw heads. But it would be interesting to see the strength difference between them all.

[@saamilarson]

Dan Smulders there’s a difference between Robertson and square drive. Robertson’s are not generally used in the US, and have a slight taper compared to square drive which have no taper.

[@gotdangedcommiesitellyahwa6298]

@@mikeries8549 $15/hr for manual labor?! Where the hell do you work? Around here you're lucky to start off making 8! You wanna talk about a high turnover rate...

[@sunalwaysshinesonTVs]

I havent seen all his uploads, but this one so far vividly demonstrates how thorough this guy performs a review. A god sent to us consumers.

[@ProjectFarm]

Glad I can help! Thanks for watching.

[@matthewcook2796]

Awesome! You by far do the most thorough tests.

[@ProjectFarm]

Thank you!

[@Weezulguy]

Picked up the Milwaukee bits this past summer after cussing some garden beds I was rebuilding with old, worn out landscape ties and rusty old two inch deck screws. These held up very nice although I was a bit hesitant at first because they didn't seem to be large enough. In fairness I haven't bought any driver bits since they started making these narrow neck style bits, but I was impressed. Thanks for the recommendations!

[@ProjectFarm]

You are welcome! Thanks for sharing.

[@knartfocker00]

Dude, I love how succinct, scientific, relevant and usable every one of your videos is. Keep doing what you're doing.

[@ProjectFarm]

I appreciate that!

[@jamessalter4747]

Thank you. All of your work and testing and experiments do not go unappreciated!

[@ProjectFarm]

Thank you!

[@xXB.FunkXx]

Super thorough review! Thanks for taking your time to do that for all of us👍. Definitely earned a like and subscribe.

[@ProjectFarm]

Thanks! Thanks for watching and subscribing.

[@rambandagi1]

If all could be as good as this guy in making reviews. No drama, No nonsense. Pure objective comparison. Thanks!

[@ProjectFarm]

You are welcome!

[@dough9950]

I would love to see a comparison of different screw bit geometry, philips vs Robertson, torx , etc

[@mattrinne]

I second that emotion!

[@ejwall]

Yes!

[@trendkilla254]

I feel like torx is the best personally. Just a guess though.

[@ianvaldivia1993]

I will love to see that also

[@OrlandoORC]

Torx all the way.

[@sasquatch5680]

im always impressed of the skill and time you put in on these tests..WELL DONE

[@ProjectFarm]

Thank you very much!

[@BlackfingerGarage]

Agreed!

[@haciendadad]

WOW, just WOW! What a great example of a thorough test! I learned a lot and I think I am going to buy some Milwaukee Shockwave on Amazon now.

[@ProjectFarm]

Thanks!

[@sharpfocus5]

Thank you for your research. I took your advice about Milwaukee and I have not been disappointed.

[@ProjectFarm]

You are welcome! Glad to hear!

[@finnblackburn9583]

Thanks for making these comparisons! I work as a mechanic and it always seems to throw the supply shops for a loop when I call them up and insist on specific brands for everything. Your reciprocating saw blade comparison introduced me to the Diablo brand and that really helped me out when I was working on equipment that I couldn't use torches around.

[@ProjectFarm]

I love it when the videos help viewers! It's a huge source of satisfaction and keeps me testing products!

[@cholesterol6703]

Based on the Makita "twisting force to break" test, it evidences the qualities of the predominant Japanese heat treatment philosophy: stale gummy bear. A hard outer shell and a relatively rubbery center. The material twists and deforms, trying to prevent overall catastrophic failure by allowing localized plastic failures. It is achieved normally with a controlled annealing and cooling ramp followed by an induction hardening stinger for the shell stiffness.

[@khandimahn9687]

As someone who recently discovered the virtues of an impact driver over a drill, this is the exact content I need to make sure I'm getting the best value for my money.

[@keithcharlton4297]

Just the review I was looking for!!! Many thanks.

[@ProjectFarm]

You are welcome! Glad to hear!

[@Ramn8tr]

I really appreciate the effort your put into all your tests. I’ve changed my mind on more than a few brands based on your videos. Keep up the good work.

[@ProjectFarm]

Thank you!