I can throw away my table saw jigs. This is all I need!

▼ IMPORTANT DETAILS ABOUT VIDEO: ▼
★THIS VIDEO WAS MADE POSSIBLE BY★
My Woodcutters is a small Canadian business that specializes in Helical carbide jointer/planer heads and replacement HSS steel knives for both new and older machines. It is well worth supporting: mywoodcutters.com/
My Table Saw and Bandsaw are AWSOME! Check them out at Harvey Woodworking Machinery: www.harveywoodworking.com/
My hand tool collection includes premium tools from Bridge City Tool Works: bridgecitytools.com/
Please help support us by using the link above for a quick look around!
(If you use one of these affiliate links, we may receive a small commission)
Some other useful links:
-Check out our project plans: stumpynubs.com/product-catego...
-Instagram: / stumpynubs
-Twitter: / stumpynubs
★SOME OF MY FAVORITE INEXPENSIVE TOOLS★
- #ISOtunes Hearing Protection (Save 10%): bit.ly/3BHYdH7
-123 Blocks: lddy.no/vpij
-Mechanical Pencils: amzn.to/2PA7bwK
-Lumber pencil: amzn.to/2QtwZjv
-Pocket Measuring Tape: amzn.to/2kNTlI9
-Nut/Bolt/Screw Gauge: amzn.to/2CuvxSK
-Self-Centering Bits: amzn.to/2xs71UW
-Steel Ruler: lddy.no/10mv7
-Center-Finding Ruler: lddy.no/10nak
-Bit & Blade Cleaner: amzn.to/2TfvEOI
-Narex Chisels: lddy.no/sqm3
-Mini Pull Saw: amzn.to/2UEHBz6
-Shinwa Rulers: lddy.no/zl13
-BOW Featherboards: amzn.to/430ldhv
(If you use one of the affiliate links above, we may receive a small commission)

[@StumpyNubs]

▼ *IMPORTANT DETAILS ABOUT VIDEO:* ▼ ★THIS VIDEO WAS MADE POSSIBLE BY★ My Woodcutters is a small Canadian business that specializes in Helical carbide jointer/planer heads and replacement HSS steel knives for both new and older machines. It is well worth supporting: mywoodcutters.com/ *My Table Saw and Bandsaw are AWSOME! Check them out at Harvey Woodworking Machinery:* www.harveywoodworking.com/ *My hand tool collection includes premium tools from Bridge City Tool Works:* bridgecitytools.com/ *Please help support us by using the link above for a quick look around!* (If you use one of these affiliate links, we may receive a small commission) *Some other useful links:* -Check out our project plans: stumpynubs.com/product-category/plans/ -Instagram: instagram.com/stumpynubs/ -Twitter: twitter.com/StumpyNubs ★SOME OF MY FAVORITE INEXPENSIVE TOOLS★ - #ISOtunes Hearing Protection (Save 10%): bit.ly/3BHYdH7 -123 Blocks: lddy.no/vpij -Mechanical Pencils: amzn.to/2PA7bwK -Lumber pencil: amzn.to/2QtwZjv -Pocket Measuring Tape: amzn.to/2kNTlI9 -Nut/Bolt/Screw Gauge: amzn.to/2CuvxSK -Self-Centering Bits: amzn.to/2xs71UW -Steel Ruler: lddy.no/10mv7 -Center-Finding Ruler: lddy.no/10nak -Bit & Blade Cleaner: amzn.to/2TfvEOI -Narex Chisels: lddy.no/sqm3 -Mini Pull Saw: amzn.to/2UEHBz6 -Shinwa Rulers: lddy.no/zl13 -BOW Featherboards: amzn.to/430ldhv (If you use one of the affiliate links above, we may receive a small commission)

[@Artisanwoodworks73]

@StumpyNubs I have a DeWalt735. What would YOU consider to be the best Helical head to replace the OEM head with? Thank you.

[@jodilea144]

I always appreciate simple, and dry humor too. 😁

[@johnslaughter5475]

This may have been a bit tongue-in-cheek, but it really shows just how much time we spend making complex jigs when there is no need to.. KISS!!!!! Thanks, James. 😊😊

[@somedayDefect]

I love to see ideas like this! After 45 years as a maker, I believe I have built more things to build things than I have built things!

[@cdjhyoung]

Sometimes at the end of a project I kind of think I built the jigs more to impress my friends than to make the project easier.

[@kadmow]

- Of course if you haveto do the same hop manytimes over - repeatedly, jugs are the solution. (a jig is merely the "hardware" problem that CNC programming solves for - in software) - Just as a jig is "unnecessary" for a one-off so too is CNC for most simple geometries. (of course, most woodworkers have never touched anything CNC unless they have delved into CNC routing or 3d printing)...

[@68HC060]

I consider the things I built to build things to be things too. 😃

[@drewscreen]

I disagree that a jig is unnecessary for a one-off. Sometimes having a jig is the only safe way to make a single cut.@@kadmow

[@hermit84]

The most complex and expensive jig I've ever made: a router table. I needed a lot round bars from the same wood and my only idea was to make them with a router. Now I have a router table, which has been so much more useful than the stuff I've actually built 😂 At least that's my view. My baby loves its climbing wall and runs away as soon as the router spins up 🎉

[@skigglystars9525]

I've been saving money in an envelope for just this thing. At only $500 this is a steal. I may probably add $100 so I don't feel guilty about taking advantage of you.

[@paul-ld9vh]

😂😂😂

[@norWindChannel]

A steal indeed😅

[@tomrund-scott7879]

Can I save a little money, and have you send me just the plans to build one if I source my own plywood? How about $300?

[@MarksElectricLife]

I’m sure Woodpeckers will be releasing one soon for around $1,000

[@---l---]

Got some big Car Talk energy here.

[@ourtube4266]

I came up with this myself just last week. Bought a $3 mdf shelf at Menards because it’s cheap and i have no self control. I used that factory straight edge to square up some plywood that I had to freehand cut with my circular saw earlier. I was particularly proud of that one.

[@Coen80]

😂😂😂 'i bought a 3£ piece of MDF because i have no self control 😂😂😂❤

[@interiot2]

It will blow your mind even more when you learn how versatile hand saws are. Straight cuts, angled cuts, they do it all!

[@kristinnkristinsson1369]

Hand saws are especially handy for those occasions that you want a 'straight-ish but not perfectly straight' cut.

[@interiot2]

Saws?! Why back in my day, we used axes for everything. They're even more versatile - felling, splitting, hewing. Saw teeth are weak, axes are strong!

[@blahblah9036]

​@@interiot2 -said the dwarf.

[@Self_Evident]

Straight cuts??? Where can I find one of these mythical straight cutting hand saws? Every hand saw I've ever used cuts a line about as straight as a Rorschach test is clear... :)

[@miket2120]

After I make the cut (usually angled) with a hand saw, all I have to do to make it straight is hold the wood juuuuust right so it looks straight.

[@filldev]

Excellent as always, James. But would you please follow up with how to make a jig to help me make one of these jigs myself? Also, a metric version would be helpful. Thank you.

[@lukeblackford1677]

This is awesome because I never made any jigs, so I don’t have any to throw away. Procrastinating pays off!

[@drive-channel1834]

Same. Our strategy wins.

[@jayp8130]

I can listen to you teach me tip,tricks and techniques all day!What I like most is you speak clearly to where even someone that doesn’t understand English would still understand you 😂

[@uptooearly]

I used this yesterday and got to say, it is worth every penny. Thanks. Wish I would have thought of it, and I could be making bank.

[@rooster1999]

Never clickbait Ideas that actually work Thank you

[@tabitha2706]

Mr. Hamilton. King supreme of woodworking jigs. "Throw away all your jigs", by, of courae, making a tapering jig. LOL

[@twcmaker]

Miracle jig.. Love it. We sometimes forget that there are simple ways to get things done. Thank you.

[@kenbrown2808]

Q: how many cabinetmakers does it take to change a light bulb? A: only one, but he has to make a jig for it. more seriously, sometimes a jig is a craftsmanship project in and of itself; and there's nothing at all wrong with that.

[@tomware9448]

Can tell you from personal experience, making your own tools is one the most gratifying jobs in my shop.

[@michaeldoto4673]

Who knew April Fool’s Day came a month early in a leap year? Well done James reminding folks that sometimes “simple” is better.

[@cyrilnorrie8450]

Too funny! Point taken. It reminds me of observations of engineers designing complicated and expensive equipment to do relatively simple tasks. When they are asked why they came up with such a complicated design, they say “I paid a lot of money and went to school for years to become an engineer and it wasn’t so that I could build something simple!”😂 Thanks for reminding us that overdesign is not the end goal.

[@bobbylibertini]

They could sandwich the computer, sensors, digital indicators and servos in the middle of the plywood between the layers, with the battery (Can't have clueless woodworkers doing complex and dangerous things, like changing a battery- someone might get hurt!)

[@rogermccaslin5963]

Would it have a magnetic charging thingy or some plug-in doohickey like a USB-C? And Bluetooth, what about Bluetooth? Can you imagine the data you could collect if the sensors were downloading in real time? Next level! @@bobbylibertini

[@bobbylibertini]

@@rogermccaslin5963 There's have to be an "app" of course, so you could see what your jig is doing (Like: Relaxin on the shelf) while you're at work. And a voice synthesizer so it could give you audible safety warnings, like: "Your farts reek of chili".

[@Clownmeati8]

Maybe won't replace EVERY jig, but that is really a great idea. As is usually the case, its beauty is in its simplicity.

[@CARLOSTREUIL]

Just yesterday I found yet another use for your jig. A neighbor's kid came to me with a 4 inch tree section complete with attached branches and bark. He wanted to keep the branches and bark, but he wanted the tree rings cut out leaving only the outer ring. The tree section had been cut in half and was mostly dried. I got a piece of scrap peg board and screwed the tree section to it with 4 screws, two on the narrower end and one on each side of broader end. I then began to rip cuts a blade width apart at varying blade heights until most of the heart of the tree section at the smaller end was removed. I then unscrewed it and angled the larger section repeating the cuts until most of the larger end was removed. With the aid of a sharp chisel and a hammer the remaining thin strips were removed. A little sanding with 80 grit sand paper wrapped around a section of closet rod and the job was almost finished. The remainder of the peg board was then cut to shape on my scroll saw to make a back for the project. The hollowed out interior held a collection of 9 volt batteries and wiring that would power LED lights on the tree branches.

[@gregmead2967]

Now THAT was a thing of beauty!

[@mchavez56]

I have not laughed so hard all week. excellent!

[@solivier7983]

ooh ooh I have a PILE of those jigs in my workshop!

[@lhpl]

Wow! At $500 a piece, you are going to be rich! 😂

[@garymiller5937]

Thank you for the $500 jig James! It works spectacular!!!!! 😊😊😊❤❤❤

[@peterschunk7810]

The check is in the mail 😉

[@drivethru1835]

I liked how you shared when you got your first “head “. Never forget ☺️

[@charliearchdekin7763]

Hello, I do not normally comment on U tube, but I have learned a great deal from watching your content. I was a welder boilermaker for 40 years and woodworking is quite a challenge. With your help challenges are easier

[@IcetipsVideos]

If you get something straight and square, it is amazing what you can do with it! :)

[@dian3145]

SASE. Now that’s a trivia question! 🤣 I’ll take two, both the long and short versions, I’d probably hurt myself scavenging my scrap pile.

[@jimstiles5278]

I am working on building a guitar from scratch, which requires lots of odd, angled cuts. This idea is way better than the specialized jigs I have been making to help with these cuts. Thanks! I am setting up my first such jig now (laminating 2 thin sheets of plywood on my very flat reference surface, to which I will add a replaceable guide surface to run along the fence so that I can re-cut that reference face any time I want by running what is normally the blade-side of the jig along the fence to precisely set the total jig width for crucial cuts. I am considering pre-drilling holes so I can easily add reference blocks any time I want (and swap them around as needed for whatever cut I need to reproduce). Lots to learn and figure out.

[@onefeather2]

As always great video and love the humor..😊😊❤❤

[@edwinlikeshistractor8521]

Beautiful.

[@littleeaglewoodworks]

Always so practical, but highly informative!!! Thank you

[@islandseeker1260]

I'm hoping the followup video will let me know how to make dovetail joints with this amazing jig!

[@willtube61]

Damn you and your simplified methods. Now I can’t justify building complicated jigs. 😂

[@craigwiest772]

Smiled the whole time.

[@bobalman]

The jig is up!

[@t1bmxfbm]

By far the most useful shop tip i have watched

[@edforthought]

I have just the piece of plywood waiting for me in my shop!

[@brianfairbanks6156]

I didn't see this until April 1st. I entirely thought it was an April fools joke, providing useful information regardless.

[@chipb7570]

So simple it’s genius

[@olddawgdreaming5715]

Thanks for sharing with us James. I liked the jig you shared with us. Fred.

[@jameseconleyjr7868]

Genius. My checks in the mail.

[@lac1776-qd5bd]

Lol love the video. Just getting started in woodworking, and I don't have dedicated space for workshop so I have to drag everything in and out of the house to work on projects. Because of this, I haven't made a table saw jig yet except for a 24x18 in piece of 1\2 ply wood that I attach plastic runners whichever direction or distance I need for the various cuts, and use double sided carpet tape I had lying around to attach my wood to the "sled" the carpet tape also works great for the runners. If only I got get my dewalt 7491rs stand a little storter I would be good to go! My table saw height for some reason is 39 inches from the ground and I am 5'1 so maneuvering large pieces is even more difficult, I end up wearing 4in heels when I need to cut larger stock so I am at a more comfortable and safe height. If I didn't have a narrow doorway and high stoop in and out of the front door I would build a mobile cabinet for it but I wouldn't have enough clearance for that. Can wait to find a house with a dedicated workspace.

[@bigdaddy99929]

KISS. Yep, totally agree. Thx Stumpy!!

[@G.I.JeffsWorkbench]

Thanks again for making us better makers. This “jig” is genius. The folks that want to sell me plans for complex jigs are gonna hate on this video. After all, “real” woodworkers must “complicate every sunset” if they’re worth their salt (or sawdust). The rest of us will continue to admire, respect, and, of course, remain supremely satisfied subscribers. We’ll keep learning from your videos and spend our time making things.

[@EricJacobson1990]

wow..... so simple 😧 as soon as you said taper jig I started feeling super stupid. This would have saved my but so many times before, I can't believe i didn't think of it!😱It's so straight forward

[@MCsCreations]

Yeah, a piece of plywood does miracles! 😊 Thanks, James! Stay safe there with your family! 🖖😊

[@mmoussa01]

I can’t believe it hasn’t been 24 hours yet since this was posted and already I am seeing cheap knockoffs of this amazing jig being sold at the local big box store!

[@InformationEngineer59]

Impressive! I was able to build one of these jigs in less than two hours!

[@jfaz]

Great ideas! Thanks

[@Critter145]

Reminds me of the Ren & Stimpy: LOG! It’s BOARD!

[@XDIY]

Simple and usful... as always🙏

[@petreskyfilms]

Brilliant!!! Thanks!

[@patriciamay638]

About time someone posted this content.

[@SenselessUsername]

2:28... Now I really want to see your thousand-legged table project finished.

[@emilevoyer123]

THANKS FOR THE VIDEO

[@kerrygibbs8198]

This is such a great tip! Maybe obvious to some but this will be my secret weapon for solving some problems. Thank you!

[@johnnyb95678]

Eureka! You have come up with what is truly the wonder jig of all time. And what a great deal at only $500.00. The envelope, with appropriate postage, is winging its way to you as I write this comment. Seriously, always enjoy your videos. I always wonder how many takes you do in order to keep a straight face while recording. Thank you so much for all the great information.

[@richardmclaugfhlin65]

Finally, something I can use in my not-one-fancy-tool garage. You da bomb.

[@MaddMaxxWoodWorks]

I have several of those sleds in my shop

[@milky2k]

$500? Its the same price as Woodpeckers!

[@whomadethatsaltysoup]

Yet another quick and easy jig to achieve accurate cuts in an efficient and safe manner. Thanks for sharing.

[@fidgetshouse]

❤ I wish I had seen this sooner. You are always a problem solver with the simplest solution.

[@GWServices]

Superb. I’m a great fan of a “but wait there’s more” and use it in every video I make.

[@norm5785]

Great multi use jig. Good quality cutters. Thank you for y. Stay safe, warm, happy and healthy. From Henrico County Virginia 😊

[@beautifulveneer]

I was shown a similarly simple jig for tapering, but instead of gluing blocks you trace the leg as it should be held. Then use the bandsaw to cut out the area to hold the leg at the desired angle, and use scraps as wedges to secure the leg.

[@jasonmoncrieff7449]

Brilliant James!!

[@Bluuuz]

Brilliant, brilliant, brilliant!

[@artszabo1015]

You are not Norm Abrams - BUT - Norm Abrams is not Stumpy Nubs. You are GREAT my friend and I always enjoy your videos. Thank you very very much. Art from Ohio

[@Sam-th4jl]

i use a very similar jig but with t slots routed in it for clamping, and it runs in my mitre slot rather than against the fence

[@robertpearson8798]

I’ve been truing up the edges of heavy plywood cutouts for years. The plywood was cut out freehand so the edges were far from true. I have a three inch wide length of plywood that I screw to the top of the cutout with a little bit of overhang and run that side against the saw fence to true up the opposite side. It then has one true side to reference for every other operation.

[@KinuGrove]

LOL nice and simple. Love it !!!

[@paratus04]

Just cut 15 decorative oak stair risers to fit. Used a scrap piece of plywood and double sided sticky tape to taper them when the space wasn’t square. Really handy and quick.

[@clarkcase1059]

Amazon has hold down toggle clamps at 4 for $13. I made blocks out of several layers of plywood, and put such a clamp on the blocks. Then I put those clamps where they are needed on my magical piece of plywood with hot glue. This lets me run lots of pieces without having to glue or tape the workpieces down.

[@marcbarash6045]

Thanks James

[@tomtimmons2228]

Hehehe! Money is on the way. Large bills at that. Thanks for the tutorial Jim.

[@kenbrown2808]

I have always wanted to make a cash withdrawal at a bank and ask for large marked bills.

[@altosack]

Too bad they stopped printing $500 bills; it would be worth the price of admission to see the look on Mr. Nubs’ face when he received it. Ancillary effects would be designing and building the micro video recorder to be enclosed…

[@adsbadsb9488]

I hope you have applied for a Patent for your multi-purpose jig. Your channel is great, fabulous make sense content you provide. Keep it up!

[@d.k.1394]

Thankyou for sharing

[@guyh.4553]

HA HA HA HA!! 😂😂😂 My check is in the mail Stumpy!

[@kadmow]

Very nice, great to go back to basics...... - also - any size plywood sheet can be used - to act as a large flat infeed and outfeed table for straightening full length construction lumber... (a "in table" hold-down - to stop the "training board" from tilting - very handy (coupled with "in-board" hold downs for the workpiece)...

[@greggiono8789]

This gives me an idea,thanks!

[@robinfisher4990]

Love woodworking humor! Thank you!

[@tjdewolff5104]

Just the kind of tips that makes me smile! Go on like this.

[@jeezusjr]

I appreciate this channel so much. It's the only one in my feed that shows really smart tips for getting the job done without extra expensive tools.

[@artswri]

I watched this several times. It’s a pretty complicated jig, and I keep losing it in the scrap bin. Then my spouse saw it and ran off with it, so I’m going to make another one as soon as I have a few hours. Thanks!!

[@louisvictor3473]

Are you going to make another wife in just a few hours? No surprise the last one ran off with your jig! You basically made them for pine-ing for one another. Really is your fault.

[@zapa1pnt]

James, thank you. I have something I was trying to figure a good and easy way to taper. This is so simple, for all the things you mentioned. I love simple. ❤ 😁✌🖖

[@thomasbyrne7770]

Bless you for this video Tom Byrne

[@colinmclean2523]

This man is a genius. My £500 cheque (you do take sterling?) is in the post!

[@johnford7847]

Such a deal! Good video, sir! Thanks for sharing.

[@ahdid6105]

Thanks man. Simplicity is a superpower..

[@nicholaskindred929]

Great Idea !!! $500 + tip very reasonable

[@3frogltd987]

As always good info from James. I grew up in Michigan very near where he is based. Must be something in the water there, I have a similar wry sense of humor....keep them coming James! 4:32

[@LohPro]

$500 seems more than reasonable for something like this. Should get many, many years worth of use from it. :) easy & straightforward! thanks as always!!

[@kenmearns6164]

I feel a purchase coming on. 😂 Love your videos, keep up the great work 👍

[@jfivecoat]

I changed both my jointer and planer to shelix heads and the noise difference and cut quality is amazing. Best upgrade to older machines you can do.

[@TinkeringGoblin76]

Marvellous, imaginative, creative and simply genius!

[@joemcgraw6288]

Great! I love it, thank you.

[@bvinduck]

Awesome tips!! Thank you!

[@watermain48]

Thanks James. Oftentimes, it seems like simple is really better.