I figure out the "Tight" switch of the NUX MG-100 (Cheapest multi effect on the planet)

[@robrobbins4906]

This isn't figuring out the mystical "tight" switch, It's called activating the foot controller.

[@Meuh974]

I'm getting one :) can't wait

[@jimmyrocks43]

Great effect pedal for it's price!

[@derrickmiracle6072]

Im really happy with mine, it was a little tricky figuring out the wah pedal function, and pedal set up. The only thing i don't like about it is that the two foot switches need to be about 3 inches spaced farther apart over all 4 out of 5 stars! Cant wait to see what they'll come out with next!

[@markvannienadal1613]

hello please more patches, im also using this cute guitar processor..

[@jimmyrocks43]

Future maybe. Subscribe to follow me. Thanks for your support.

[@slipknotsixcube]

Omg thank you for this simple trick. My tone sounded muddy nefore with my nux mfx10. And did this trick and the sound was way more better. I can djent peacefully lol. Thanks sir.

[@jimmyrocks43]

My pleasure. Thanks for your support. Appreciate it.

[@mikenurse4467]

I put new batteries in and it doesn't work, is there on and off switch, it does work with DC plug

[@GroupRIPS]

Thank a lot Man I have one arriving tomorrow nice quick tutorial here

[@jdj62464]

Nux MG-100 or the new ZOOM G1X FOUR? Which is the easiest to navigate and setup? Which one sounds the best? The tones I'm wanting to get are AC/DC, Aerosmith,Sabbath, Zeppelin, AIC and Soundgarden if they can also do some Hendrix, SRV and Gilmour that would be even better. I know that's asking a lot from a $100 buck pedal but if they can get somewhat close then that's fine. Would also like to be able to run it without a amp and into my interface using studio monitors, that wouldn't be a deal breaker just a bonus.

[@jimmyrocks43]

Haven't try the G1X floor yet, so I can't really common about that. Seems like all the sounds you're looking for are British style amp(most), so I can say that NUX MG100 got a very cool Marshall amp sim. Also the green back cab sim is awesome for direct recording. But one thing I pretty sure about is that the delay and reverb effects are much better in the ZOOM products. Hope that answers your question.

[@jdj62464]

@@jimmyrocks43 Thanks for the answer!! So you can run through a Focusrite interface and use your studio monitors without the need for a amp .

[@jimmyrocks43]

@@jdj62464 sure you can.

[@CrazyD81]

Hi there!does the univibe sound good? I want to learn shine on you crazy diamond by pink floyd and i need a univibe and rotary effect to play the song .. Thank you

[@jimmyrocks43]

To be honest with you, I haven't try it yet. I am a simple effect user. But I pretty sure it will be useful.

[@davidpenwell3432]

Does anyone know how to factory reset this pedal? Ive saved patches and selling it but want to reset it first

[@sky77fwhu]

Press and hold "SAVE" button for 3 seconds and you will enter SETUP mode. You can find there the factory reset option easily.

[@OmarOttoman]

What song is that at 3:40?

[@brainfartmaster5980]

Linda sounds like "beat it by michael jackson" but idk

[@OmarOttoman]

Let’s wait for the proud video poster to respond.

[@diahrrea12]

cold - Breaking benjamin

[@niggacrucifier8396]

How is the sound when connected to headphones as output?

[@jimmyrocks43]

Of course it will depend on your headphone. If your headphone doesn't color the tone, it will pretty much sound like this.

[@Jackson1959.]

My pedal works only as volume switch. Didnt notice any voice changes by switching it on and off. Please guide briefly. I want the effect sustain for 10 to 15 seconds.

[@AdamBlackArts]

If you tap it fully forward the Pedal light will light up and it'll work as a wah pedal. Be careful when you wah, though, because tapping it fully forward again will turn it back into a volume switch.

[@Jackson1959.]

@@AdamBlackArts Damn my button was so hard. Need alot of pressure. Finally figured it out.

[@AdamBlackArts]

@@Jackson1959. Excellent!

[@sky77fwhu]

@@Jackson1959. you can calibrate the pedal in the system menu, so you can modify the power you need to push.

[@Jackson1959.]

@@sky77fwhu oh nice man. Thankyou bro

[@rahilaqureshi5861]

Hi Jimmy nice video. Can you make some clean tone patches for this processor

[@jimmyrocks43]

Stay in touch. More free patch is coming.

[@rahilaqureshi5861]

Thanks. Kindly do it specifically for nux Mg-100

[@WaqasRazzaq-]

i have one made for my self according to my amp using mg 100.

[@WaqasRazzaq-]

Which amp are you using.?

[@ronaromin944]

Which is better between Mooer GE100 vs Nux mg100?

[@jimmyrocks43]

Haven't try out Mooer stuff, so I can't comment on that. Sorry.

[@wayan4271]

Nice tone..😎👍👍

[@jimmyrocks43]

Thanks for your support. Appreciate it.

[@wayan4271]

@@jimmyrocks43 i need the patch..😊

[@Jasper12]

Thank you somuch sir, big help

[@Peterplayingguitar]

Thanks for this tip :)

[@NealJett]

Hey! Quick question. I noticed when you turned the "tight switch" off, it sounded muddy, but when you turned it on it sounded much better. How did you do it? What setting is the "tight switch" called in the Nux MG 100? Are you just raising the volume using the pedal? You also said "Make sure mixer is on when using direct situation", what is direct situation? You mean when it's going direct line in to something? Thanks! :)

[@jimmyrocks43]

"tight switch" is simply the Wah pedal. Just turn it on, and you'll get a tighter tone!

[@NealJett]

@@jimmyrocks43 Oh thanks so much!! Does this apply to all wah pedals? or just the one in the MG 100? Does the pedal need to be perfectly flat to get the best tone when I turn it on? or at a slight angle? Also, once its on, it sounds almost EQ'd a bit, like more "stand out in front of the mix", like it's acting as a presence booster when the Wah Pedal is on, why is that? Thanks again! :)

[@jimmyrocks43]

@@NealJett I don't think this will work on every Wah pedals, but in this case, it does work perfectly! Just turn on the Wah at the top position, and it will do the job.

[@NgalaRay]

@@jimmyrocks43 please my tight switch requires too much pressure before it comes on is there a way I can soften it a little?thanks.

[@alainvb8786]

@@NgalaRay hello tu peux retirer le cahoutchou dessous la pedal Ou tu modifie l action de la pedal dans la configuration tu vas dans parametre et tu modifie l action décrasement Maxi . Tu en mets moins . Dis moi si cela fonctionne . Bye

[@frank-ip2xn]

Which one? Digitech Element XP or this nux??

[@jimmyrocks43]

It's not a fair comparison because of the price difference. You want a better performance one, and you don't care about the price difference. Go for the DigiTech. If you are on a budget, This NUX is great.

[@frank-ip2xn]

@@jimmyrocks43 In my country, (argentina) their prices are pretty even, and I had that doubt

[@jimmyrocks43]

@@frank-ip2xn Then you have the answer.

[@antonioj4746]

I disagree with Jimmyrocks. I've had the Digitech rp90, that has the same technology as Digitech Element, for a few years, and it always sounded harsh, cold and very artificial to my ears (specially ODs and distortion; cleans are good. Digitech Element sounds pretty the same in the demos I've listened). One year ago I bought a Nux PG2, which is a small pocket multieffects, just to try... the sound is quite better than Digitech's, surprisingly good IMHO. The amp simulations are quite more realistic, the sound is sweeter and not ice-piercing, as the Digitech's is. The effects - modulation, reverb, delay... - on the contrary, are better in the Digitech (listening the demos I assume they have improve all these effects in the MG100, since PG2 is a very limitated unit in this aspect and the MG's demos sound quite better). I mean, the base sound is far superior in the PG2, quite more accurate and realistic, and it has the same technology as MG100, so I'm thinking in buying the MG100 because of the superior specs (amps, cabinets, effects, drum box, looper...).

[@Ajieputra19]

With mooer GE 100 which is better?

[@jimmyrocks43]

Not familiar with Mooer products, so I can't commen on that. Sorry.

[@davidkastin4240]

That's what I'd like to know. Which one has better sound quality. Lemme know if you find out. Thanks

[@jaszulni]

@@davidkastin4240 mooer has a poorer sound.. its for entry level.. this one is a baby..

[@darmadimadi1344]

Hi......jim ...please to give me seting your voice nux mg 100. sure I like it..

[@DingleDut]

So how exactly do you get the "tight" sound again? You aren't clear about that.

[@jimmyrocks43]

It's the build in wah pedal.

[@ashportal83]

what amp model you using in this video? it sounds really good

[@satamique]

at 3:51 is it you who composed this? it's so great! i need tab lol :)

[@jimmyrocks43]

I believe it is from the band "Breaking Benjamin" song called "So cold"

[@satamique]

Yes it is! Thank you! :)

[@sandrapotvin9299]

which one better Mooer ge100 or this one nux?

[@jimmyrocks43]

It depends on how much editing skill you have. If you know how to edit your patches, then I think you won't have a problem using both of them.

[@queenday15]

lol how did you turn the pedal off so gently:)? i opened the pedal to see how it works and you need one hell of a step to make the sensor respond :)

[@buicuong9684]

same here :(

[@queenday15]

@@buicuong9684 you can take the rubber beneath the pedal off and then you will be able to do it by hand

[@rahik3264]

Please make some video on makeing tone. Like For metal song and for sweet lead and for rock lead etc plzZ make a video. Um from bangladesh and um using this nux 100 plzZ make a video brother.

[@chenrick9444]

竟然到今天才看到...回家趕緊試試

[@bhawanibhattarai3355]

This or the g1x4

[@inhkhoa374]

can NUX mg100 act as an audio interface ??

[@sirgregpapamikemika5576]

Wow

[@mrbwanker]

my pedal light doesn't even come on? what i am doing wrong??

[@jimmyrocks43]

Check your power supply.

[@jirenuniverse116]

That's a pedal switch bruh lol. It increases volume, reverb, or gain, and toggles wah effect depending on your preset

[@Yonlawlawlaw]

I think this thing cost more than actually value, 100 bucks for this awesome pedal is a joke, best bergain ever

[@brentclark1822]

I was skeptic as well, but I bought one and its up to par with ZOOM and DigiTech. Great digital display w old school knobs to adjust every amp, cab, and FX. The others do not offer that. You have to scroll up or down pushing a button to get to where you want to be. NU-X is simple and sounds great. Tube tones in digital format is hard to tell it is NOT a tube amp. Also has a Mix function for direct out to amp, console or recorder. I was very impressed.

[@firhanrizani96]

Which is better between Mooer GE100 vs Nux mg100?

[@jimmyrocks43]

Haven't try out Mooer stuff, so I can comment on that. Sorry.