I Found the Best NVMe Hat for the Raspberry Pi 5

Рет қаралды 66,604

Күн бұрын

Пікірлер: 67

@DataSlayerMedia 10 ай бұрын

Just kicked off something exciting - a bespoke 3D printed case for my Raspberry Pi 5 is on its way! (thanks JLCPCB) Remember FREE $60 discount awaits at JLCPCB 👉 jlcpcb.com/?from=DataSlayer

@dmitryni 9 ай бұрын

How will you cool the nvme card during active operation? With this arrangement in the HAT, installing a heatsink is almost impossible, and the heating there is significant and the nvme card will also heat the processor.

@Rob_65 8 ай бұрын

I bought the NVMe hat from Waveshare and that one also ticks the 800 something MB/s with my Samsung EVO 980 Pro. One thing I don't like on most hats is that there is no way to have cooling on the NVMeEven worse, it's sandwiched such that there it hugs the (fairly hot) Pi5 board without any proper airflow between the boards ... This is screaming for a larger case where we do not sandwich the two boards but put them next to each other

@KevinBond-q9k 10 ай бұрын

Since the NVME runs hot, why not add the cooling pads too? It will run even faster.

@SirHackaL0t. 10 ай бұрын

I have the Pimoroni board but I experience pauses every so often. It’s as if the SSD has disappeared and then reappears again. Most odd. Using a Crucial NVMe 1Tb drive.

@bern047 10 ай бұрын

The Crucial drive could be your problem

@chrisumali9841 10 ай бұрын

thanks for the demo and info, have a great day

@superangrybrit 10 ай бұрын

Very good video! Seems the NVMe hat was the killer addons after all. Cheers! 👍

@iblackfeathers 10 ай бұрын

awesome helpful video. i am still waiting for a decent rpi 5 case that can house an nvme board and is readily available. so far, that argon case is on my radar but hoping for better, readily available options with awesome cooling. maybe even keep the official cooler in the case since it beats most third party cooling options.

@malkogindrat 10 ай бұрын

I use the new FLIRC case for the rpi 5 and the Pimoroni NVMe base. You just can't use the plastic bottom part of the FLIRC, but you can put the little feet provided by Pimoroni on the NVMe base for stability. This way you still get the cooling from the metallic case + a little air gap on the bottom for the NVMe drive.

@srwx 10 ай бұрын

Any recommendations for a case? I figure most of the usual cases are not designed for the bottom hat so adequate space and thus cooling could be an issue. The argument of NVMEs being more reliable than SD cards is often made in this context, but I suppose the SSD needs to "breath" in order for that argument to hold true.

@kritikusi-666 10 ай бұрын

what version of Pi did you install? I do not have Pi-Apps. Did you install that afterwards? Just curios.

@DataSlayerMedia 10 ай бұрын

Newest version, Pi Apps is after market and can be installed here - pi-apps.io/

@JohnDoe-ji1zv 8 ай бұрын

@@DataSlayerMediadoes it support Ubuntu ?

@jrosealmendras88 10 ай бұрын

Very informative Content ❤❤

@galdakaMusic 10 ай бұрын

Is posible a metalic case for all? Google coral included

@jyvben1520 10 ай бұрын

i guess boot time depends on firmware (bios) which is stored in rpi (not on nvme), so it does not speed up but fast enough. if used for security why depend on just 1 device ?

@Eriiiiiiiick 3 ай бұрын

Sorry quick question, how do i un leash my creativity?

@VGl0dXM 10 ай бұрын

thanks for the info, very interesting video.

@PaulGrayUK 10 ай бұрын

Starts watching having ordered Pimoroni NVMe base the other day and still awaiting that and pi5 and case, so be fun. Thinkers crossed, though was cheap so it won't matter if it works.

@luigiprovencher 9 ай бұрын

It's not at HAT. It's a Base but it actually works better as a HAT because when I was using it with the official raspberry pi case the cable was blocking access to the sd card port and I actually had to modify the case to work with the base as a base. That should've given you a longer cable with it and they should've put a input and out on it of some kind so that you could format the drive from a computer if you had to because otherwise you have to keep on switching the boot order and using a sd car or flash drive to do it if you want to try different OS's because I haven't figured out how to do network installations,yet.

@akam9919 8 ай бұрын

all i want now are doubled pcie lanes...then my dream of a tiny portable, raid 1, nvme NAS with over 10TB of data is complete

@Crushonius 7 ай бұрын

rk3588 boards can support up to 4 gen 3 drives afaik

@TPUSILL 10 ай бұрын

So I understand this.. the boot times don’t change much compared to SD card. Seems the only advantage is size and file access?

@DataSlayerMedia 10 ай бұрын

No! Basically everything else is faster! Check out the performance benchmarks at the end of the video.

@TPUSILL 10 ай бұрын

I saw stuff on this before so I know it’s faster but just the boot times is not too much of a difference. Maybe you can do a video on the boot times difference?

@Kaalkian 9 ай бұрын

@@DataSlayerMediadoes the pi still need sd card to boot or it can be booted front rhe same nvme frigate is using for storage. I wonder if dual tpu board can be used with nvme ssd. Not sure if that is I possible with pi and dual nvme hats. Possible next video 😉

@nathanchilds3952 7 ай бұрын

New to RaspberryPi and this OS. I have my pi5 using a server/lite OS edition. How can I copy the sd card to the new drive via command line?

@cx3268 10 ай бұрын

Most top hats interfere with the cooling. Still big issue with Pi5 and these hats, either top and/or bottom is good case. More & more cases are coming.

@ozpilot8083 6 ай бұрын

I just bought the dual NVME M.2 version - so I can boot to Rasbian or Kali.

@figjoy 10 ай бұрын

Nice comparison! I bought the Geekworm NVMe X1002 PCIe board and their P580 case. Other than interrupting wi-fi connectivity, it scores well in the benchmarks I ran. It would be nice to see a comparison to the x1002 as well... Do either the Pimoroni or Pineberry boards interfere with the wi-fi signal? When I first got my Pi 5, the ports on my switch were full so I started testing it on wi-fi. Running it on a Micro SD card without a case was fine. When I added the Geekworm board and the full case without the SSD it struggled to get a signal so I removed the cover of the case and it was okay again. Once I added the SSD all bets were off for wi-fi. Now I have a new switch and don't care about wi-fi, but I still wonder if HATs usually interfere with radio signals.

@fernanddubois1792 10 ай бұрын

I just received exact same case and hat (shoe?) and only just finished assembling it so haven’t had time yet to give it a workout. I’m curious as to how it handles the heat with active cooler in that case. A metal case such as the geek worm one will make wifi a non-starter ( Faraday cage)

@fernanddubois1792 10 ай бұрын

I was unable to get the X1002 to boot from a Crucial P3 1TB NVME while in the case. It boots fine outside the case . Tried turnining off wifi and Bluetooth but that didn’t help.

@figjoy 10 ай бұрын

@@fernanddubois1792 I'd carefully reseat the ribbon cable on both ends to ensure it isn't that. I noticed the cable gets pressed against the case when installed.

@DDnight546 2 ай бұрын

You got one of the worst samsung ssd with potentially 99% coming across the 0E issue. Sad

@Sartre_Existentialist 10 ай бұрын

It seems that there is little to no ventilation for the heat coming off that SSD and the heat transfer to the pi board is very direct,. There are definitely better designed top hats that vent heat better

@Kaalkian 9 ай бұрын

Which ones ?

@simonwilkinson2294 8 ай бұрын

Can you please use chapter markers ty

@bsbhro 10 ай бұрын

My score is 49411 with Pineberry Bottom HAT and Intenso 256GB-Nvme

@airheadbit1984 9 ай бұрын

No USB 3 thumb drive?

@Bloodysugar 8 ай бұрын

OK, now is time for me to build a 1To jukebox for my car player. ^^

@Mr_ToR 8 ай бұрын

Dude, your video is great but the audio is terrible. You have very high level low frequency audio of only the filtered bass part of a music. Even the music is discenable. I'm watching on a full frequency home theather system with subwoofer. It is very disturbing and distracting. Just filter out the low frequencies, this much bass is totally unnecessary and irrelevant the subject of your video. I have to lower the volume to the point of not hearing your speech. If you don't have proper speakers, use a frequency analyzer plugin or listen with proper headphones.

@noorshah96 2 ай бұрын

Good feedback, I was thinking the same, and that's only watching it on my pixel 6, sitting in the toilet 😅 But I get a feeling, that raspy sound is achieved on purpose. And not everyone is gonna be listening with a sub either.

@prateeknarendra1637 10 ай бұрын

You should have used the nvme for coral tpu. Is cheaper and you get faster processing

@Kaalkian 9 ай бұрын

But can u use ssd with that set up? Or have to to use sd card for os and video storage

@guido_aka_guy 6 ай бұрын

@@Kaalkian there are dual m2 Slot hats

@cmdrwhiskeygalore3044 4 ай бұрын

AI Bundle (Hailo 8L) for Raspberry Pi 5 card now the best. Seems 5 months is a long time in the Raspberry Pi world

@roberthapunkt4323 4 ай бұрын

Using a PIMORONI I keep having issues with WIFI... it is very weak and constantly loses connection. Does anyone have a solution for this problem?

@ThompsonSit 10 ай бұрын

What cool projects can I do w this

@DataSlayerMedia 10 ай бұрын

It's going to accelerate most projects, in short: everything is faster.

@KaliL-x7h 3 ай бұрын

Gr8, video thanks! 🤩🤗 There are another NVMe Hats/Bottoms, lke Waveshare, Geekworm, 52Pi, even official RPI for short NVMe just need some extension! 😉 I have the Waveshare PCIe To M.2 Adapter Board (C) which is NOT a Hat technically coz its next to the RPI, i also have a 52Pi N04 M.2 2280 PCIe To NVMe Top Extension Adapter which cost double compared Waveshare but did NOT worked i tried with many different cables, then i ordered Waveshare which with SAME config/SSD/Cable worked first "try" i also have a EDATEC Raspberry Pi5 Passive Cooling Open Case but i'm using ONLY the bottom coz at top i have a RPI Official Heatsink/Fan then put whole setup on Waveshare plastic bottom Board! 😎

@scottlewis2653 8 ай бұрын

The radxa nio 12l would have a mediatek genio 1200 processor

@mammouth2727 10 ай бұрын

Does it make chromium start faster and feel snappier ?

@JohnDoe-ji1zv 8 ай бұрын

Does it work with Ubuntu ? Can someone confirm please

@paulblackwood46 5 ай бұрын

I'm getting Amiga accelerator vibes 🙂

@andreasl4320 9 ай бұрын

Well energy efficiency is something different. My NUC with much more horsepower does 3 Watts by running a NVMe SSD, Proxmox with several server tasks and so on. My other NUC with several USB HD drives and a TV tuner acting as an TV Stream and recording server for my cients is just doing 8 Watts. So no, not really efficent. Hoever much more powerful than the pervious PIs. Especially with an NVMe.